mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 10:49:33 +00:00
![Guenter Roeck](/assets/img/avatar_default.png)
Add support for the TI / Burr-Brown INA209 voltage / current / power monitor. Cc: Paul Hays <haysp@magma.net> Cc: Ira W. Snyder <iws@ovro.caltech.edu> Tested-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
636 lines
18 KiB
C
636 lines
18 KiB
C
/*
|
|
* Driver for the Texas Instruments / Burr Brown INA209
|
|
* Bidirectional Current/Power Monitor
|
|
*
|
|
* Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
|
|
*
|
|
* Derived from Ira W. Snyder's original driver submission
|
|
* Copyright (C) 2008 Paul Hays <Paul.Hays@cattail.ca>
|
|
* Copyright (C) 2008-2009 Ira W. Snyder <iws@ovro.caltech.edu>
|
|
*
|
|
* Aligned with ina2xx driver
|
|
* Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
|
|
* Thanks to Jan Volkering
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*
|
|
* Datasheet:
|
|
* http://www.ti.com/lit/gpn/ina209
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/bug.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
|
|
#include <linux/platform_data/ina2xx.h>
|
|
|
|
/* register definitions */
|
|
#define INA209_CONFIGURATION 0x00
|
|
#define INA209_STATUS 0x01
|
|
#define INA209_STATUS_MASK 0x02
|
|
#define INA209_SHUNT_VOLTAGE 0x03
|
|
#define INA209_BUS_VOLTAGE 0x04
|
|
#define INA209_POWER 0x05
|
|
#define INA209_CURRENT 0x06
|
|
#define INA209_SHUNT_VOLTAGE_POS_PEAK 0x07
|
|
#define INA209_SHUNT_VOLTAGE_NEG_PEAK 0x08
|
|
#define INA209_BUS_VOLTAGE_MAX_PEAK 0x09
|
|
#define INA209_BUS_VOLTAGE_MIN_PEAK 0x0a
|
|
#define INA209_POWER_PEAK 0x0b
|
|
#define INA209_SHUNT_VOLTAGE_POS_WARN 0x0c
|
|
#define INA209_SHUNT_VOLTAGE_NEG_WARN 0x0d
|
|
#define INA209_POWER_WARN 0x0e
|
|
#define INA209_BUS_VOLTAGE_OVER_WARN 0x0f
|
|
#define INA209_BUS_VOLTAGE_UNDER_WARN 0x10
|
|
#define INA209_POWER_OVER_LIMIT 0x11
|
|
#define INA209_BUS_VOLTAGE_OVER_LIMIT 0x12
|
|
#define INA209_BUS_VOLTAGE_UNDER_LIMIT 0x13
|
|
#define INA209_CRITICAL_DAC_POS 0x14
|
|
#define INA209_CRITICAL_DAC_NEG 0x15
|
|
#define INA209_CALIBRATION 0x16
|
|
|
|
#define INA209_REGISTERS 0x17
|
|
|
|
#define INA209_CONFIG_DEFAULT 0x3c47 /* PGA=8, full range */
|
|
#define INA209_SHUNT_DEFAULT 10000 /* uOhm */
|
|
|
|
struct ina209_data {
|
|
struct device *hwmon_dev;
|
|
|
|
struct mutex update_lock;
|
|
bool valid;
|
|
unsigned long last_updated; /* in jiffies */
|
|
|
|
u16 regs[INA209_REGISTERS]; /* All chip registers */
|
|
|
|
u16 config_orig; /* Original configuration */
|
|
u16 calibration_orig; /* Original calibration */
|
|
u16 update_interval;
|
|
};
|
|
|
|
static struct ina209_data *ina209_update_device(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ina209_data *data = i2c_get_clientdata(client);
|
|
struct ina209_data *ret = data;
|
|
s32 val;
|
|
int i;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (!data->valid ||
|
|
time_after(jiffies, data->last_updated + data->update_interval)) {
|
|
for (i = 0; i < ARRAY_SIZE(data->regs); i++) {
|
|
val = i2c_smbus_read_word_swapped(client, i);
|
|
if (val < 0) {
|
|
ret = ERR_PTR(val);
|
|
goto abort;
|
|
}
|
|
data->regs[i] = val;
|
|
}
|
|
data->last_updated = jiffies;
|
|
data->valid = true;
|
|
}
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Read a value from a device register and convert it to the
|
|
* appropriate sysfs units
|
|
*/
|
|
static long ina209_from_reg(const u8 reg, const u16 val)
|
|
{
|
|
switch (reg) {
|
|
case INA209_SHUNT_VOLTAGE:
|
|
case INA209_SHUNT_VOLTAGE_POS_PEAK:
|
|
case INA209_SHUNT_VOLTAGE_NEG_PEAK:
|
|
case INA209_SHUNT_VOLTAGE_POS_WARN:
|
|
case INA209_SHUNT_VOLTAGE_NEG_WARN:
|
|
/* LSB=10 uV. Convert to mV. */
|
|
return DIV_ROUND_CLOSEST(val, 100);
|
|
|
|
case INA209_BUS_VOLTAGE:
|
|
case INA209_BUS_VOLTAGE_MAX_PEAK:
|
|
case INA209_BUS_VOLTAGE_MIN_PEAK:
|
|
case INA209_BUS_VOLTAGE_OVER_WARN:
|
|
case INA209_BUS_VOLTAGE_UNDER_WARN:
|
|
case INA209_BUS_VOLTAGE_OVER_LIMIT:
|
|
case INA209_BUS_VOLTAGE_UNDER_LIMIT:
|
|
/* LSB=4 mV, last 3 bits unused */
|
|
return (val >> 3) * 4;
|
|
|
|
case INA209_CRITICAL_DAC_POS:
|
|
/* LSB=1 mV, in the upper 8 bits */
|
|
return val >> 8;
|
|
|
|
case INA209_CRITICAL_DAC_NEG:
|
|
/* LSB=1 mV, in the upper 8 bits */
|
|
return -1 * (val >> 8);
|
|
|
|
case INA209_POWER:
|
|
case INA209_POWER_PEAK:
|
|
case INA209_POWER_WARN:
|
|
case INA209_POWER_OVER_LIMIT:
|
|
/* LSB=20 mW. Convert to uW */
|
|
return val * 20 * 1000L;
|
|
|
|
case INA209_CURRENT:
|
|
/* LSB=1 mA (selected). Is in mA */
|
|
return val;
|
|
}
|
|
|
|
/* programmer goofed */
|
|
WARN_ON_ONCE(1);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Take a value and convert it to register format, clamping the value
|
|
* to the appropriate range.
|
|
*/
|
|
static int ina209_to_reg(u8 reg, u16 old, long val)
|
|
{
|
|
switch (reg) {
|
|
case INA209_SHUNT_VOLTAGE_POS_WARN:
|
|
case INA209_SHUNT_VOLTAGE_NEG_WARN:
|
|
/* Limit to +- 320 mV, 10 uV LSB */
|
|
return clamp_val(val, -320, 320) * 100;
|
|
|
|
case INA209_BUS_VOLTAGE_OVER_WARN:
|
|
case INA209_BUS_VOLTAGE_UNDER_WARN:
|
|
case INA209_BUS_VOLTAGE_OVER_LIMIT:
|
|
case INA209_BUS_VOLTAGE_UNDER_LIMIT:
|
|
/*
|
|
* Limit to 0-32000 mV, 4 mV LSB
|
|
*
|
|
* The last three bits aren't part of the value, but we'll
|
|
* preserve them in their original state.
|
|
*/
|
|
return (DIV_ROUND_CLOSEST(clamp_val(val, 0, 32000), 4) << 3)
|
|
| (old & 0x7);
|
|
|
|
case INA209_CRITICAL_DAC_NEG:
|
|
/*
|
|
* Limit to -255-0 mV, 1 mV LSB
|
|
* Convert the value to a positive value for the register
|
|
*
|
|
* The value lives in the top 8 bits only, be careful
|
|
* and keep original value of other bits.
|
|
*/
|
|
return (clamp_val(-val, 0, 255) << 8) | (old & 0xff);
|
|
|
|
case INA209_CRITICAL_DAC_POS:
|
|
/*
|
|
* Limit to 0-255 mV, 1 mV LSB
|
|
*
|
|
* The value lives in the top 8 bits only, be careful
|
|
* and keep original value of other bits.
|
|
*/
|
|
return (clamp_val(val, 0, 255) << 8) | (old & 0xff);
|
|
|
|
case INA209_POWER_WARN:
|
|
case INA209_POWER_OVER_LIMIT:
|
|
/* 20 mW LSB */
|
|
return DIV_ROUND_CLOSEST(val, 20 * 1000);
|
|
}
|
|
|
|
/* Other registers are read-only, return access error */
|
|
return -EACCES;
|
|
}
|
|
|
|
static int ina209_interval_from_reg(u16 reg)
|
|
{
|
|
return 68 >> (15 - ((reg >> 3) & 0x0f));
|
|
}
|
|
|
|
static u16 ina209_reg_from_interval(u16 config, long interval)
|
|
{
|
|
int i, adc;
|
|
|
|
if (interval <= 0) {
|
|
adc = 8;
|
|
} else {
|
|
adc = 15;
|
|
for (i = 34 + 34 / 2; i; i >>= 1) {
|
|
if (i < interval)
|
|
break;
|
|
adc--;
|
|
}
|
|
}
|
|
return (config & 0xf807) | (adc << 3) | (adc << 7);
|
|
}
|
|
|
|
static ssize_t ina209_set_interval(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ina209_data *data = ina209_update_device(dev);
|
|
long val;
|
|
u16 regval;
|
|
int ret;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
ret = kstrtol(buf, 10, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
regval = ina209_reg_from_interval(data->regs[INA209_CONFIGURATION],
|
|
val);
|
|
i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION, regval);
|
|
data->regs[INA209_CONFIGURATION] = regval;
|
|
data->update_interval = ina209_interval_from_reg(regval);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ina209_show_interval(struct device *dev,
|
|
struct device_attribute *da, char *buf)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ina209_data *data = i2c_get_clientdata(client);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", data->update_interval);
|
|
}
|
|
|
|
/*
|
|
* History is reset by writing 1 into bit 0 of the respective peak register.
|
|
* Since more than one peak register may be affected by the scope of a
|
|
* reset_history attribute write, use a bit mask in attr->index to identify
|
|
* which registers are affected.
|
|
*/
|
|
static u16 ina209_reset_history_regs[] = {
|
|
INA209_SHUNT_VOLTAGE_POS_PEAK,
|
|
INA209_SHUNT_VOLTAGE_NEG_PEAK,
|
|
INA209_BUS_VOLTAGE_MAX_PEAK,
|
|
INA209_BUS_VOLTAGE_MIN_PEAK,
|
|
INA209_POWER_PEAK
|
|
};
|
|
|
|
static ssize_t ina209_reset_history(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ina209_data *data = i2c_get_clientdata(client);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
u32 mask = attr->index;
|
|
long val;
|
|
int i, ret;
|
|
|
|
ret = kstrtol(buf, 10, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
for (i = 0; i < ARRAY_SIZE(ina209_reset_history_regs); i++) {
|
|
if (mask & (1 << i))
|
|
i2c_smbus_write_word_swapped(client,
|
|
ina209_reset_history_regs[i], 1);
|
|
}
|
|
data->valid = false;
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ina209_set_value(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf,
|
|
size_t count)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct ina209_data *data = ina209_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
int reg = attr->index;
|
|
long val;
|
|
int ret;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
ret = kstrtol(buf, 10, &val);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
ret = ina209_to_reg(reg, data->regs[reg], val);
|
|
if (ret < 0) {
|
|
count = ret;
|
|
goto abort;
|
|
}
|
|
i2c_smbus_write_word_swapped(client, reg, ret);
|
|
data->regs[reg] = ret;
|
|
abort:
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ina209_show_value(struct device *dev,
|
|
struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ina209_data *data = ina209_update_device(dev);
|
|
long val;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
val = ina209_from_reg(attr->index, data->regs[attr->index]);
|
|
return snprintf(buf, PAGE_SIZE, "%ld\n", val);
|
|
}
|
|
|
|
static ssize_t ina209_show_alarm(struct device *dev,
|
|
struct device_attribute *da,
|
|
char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ina209_data *data = ina209_update_device(dev);
|
|
const unsigned int mask = attr->index;
|
|
u16 status;
|
|
|
|
if (IS_ERR(data))
|
|
return PTR_ERR(data);
|
|
|
|
status = data->regs[INA209_STATUS];
|
|
|
|
/*
|
|
* All alarms are in the INA209_STATUS register. To avoid a long
|
|
* switch statement, the mask is passed in attr->index
|
|
*/
|
|
return snprintf(buf, PAGE_SIZE, "%u\n", !!(status & mask));
|
|
}
|
|
|
|
/* Shunt voltage, history, limits, alarms */
|
|
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_SHUNT_VOLTAGE);
|
|
static SENSOR_DEVICE_ATTR(in0_input_highest, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_SHUNT_VOLTAGE_POS_PEAK);
|
|
static SENSOR_DEVICE_ATTR(in0_input_lowest, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_SHUNT_VOLTAGE_NEG_PEAK);
|
|
static SENSOR_DEVICE_ATTR(in0_reset_history, S_IWUSR, NULL,
|
|
ina209_reset_history, (1 << 0) | (1 << 1));
|
|
static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_SHUNT_VOLTAGE_POS_WARN);
|
|
static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_SHUNT_VOLTAGE_NEG_WARN);
|
|
static SENSOR_DEVICE_ATTR(in0_crit_max, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_CRITICAL_DAC_POS);
|
|
static SENSOR_DEVICE_ATTR(in0_crit_min, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_CRITICAL_DAC_NEG);
|
|
|
|
static SENSOR_DEVICE_ATTR(in0_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 11);
|
|
static SENSOR_DEVICE_ATTR(in0_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 12);
|
|
static SENSOR_DEVICE_ATTR(in0_crit_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 6);
|
|
static SENSOR_DEVICE_ATTR(in0_crit_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 7);
|
|
|
|
/* Bus voltage, history, limits, alarms */
|
|
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_BUS_VOLTAGE);
|
|
static SENSOR_DEVICE_ATTR(in1_input_highest, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_BUS_VOLTAGE_MAX_PEAK);
|
|
static SENSOR_DEVICE_ATTR(in1_input_lowest, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_BUS_VOLTAGE_MIN_PEAK);
|
|
static SENSOR_DEVICE_ATTR(in1_reset_history, S_IWUSR, NULL,
|
|
ina209_reset_history, (1 << 2) | (1 << 3));
|
|
static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_BUS_VOLTAGE_OVER_WARN);
|
|
static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_BUS_VOLTAGE_UNDER_WARN);
|
|
static SENSOR_DEVICE_ATTR(in1_crit_max, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_BUS_VOLTAGE_OVER_LIMIT);
|
|
static SENSOR_DEVICE_ATTR(in1_crit_min, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_BUS_VOLTAGE_UNDER_LIMIT);
|
|
|
|
static SENSOR_DEVICE_ATTR(in1_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 14);
|
|
static SENSOR_DEVICE_ATTR(in1_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 15);
|
|
static SENSOR_DEVICE_ATTR(in1_crit_min_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 9);
|
|
static SENSOR_DEVICE_ATTR(in1_crit_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 10);
|
|
|
|
/* Power */
|
|
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_POWER);
|
|
static SENSOR_DEVICE_ATTR(power1_input_highest, S_IRUGO, ina209_show_value,
|
|
NULL, INA209_POWER_PEAK);
|
|
static SENSOR_DEVICE_ATTR(power1_reset_history, S_IWUSR, NULL,
|
|
ina209_reset_history, 1 << 4);
|
|
static SENSOR_DEVICE_ATTR(power1_max, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_POWER_WARN);
|
|
static SENSOR_DEVICE_ATTR(power1_crit, S_IRUGO | S_IWUSR, ina209_show_value,
|
|
ina209_set_value, INA209_POWER_OVER_LIMIT);
|
|
|
|
static SENSOR_DEVICE_ATTR(power1_max_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 13);
|
|
static SENSOR_DEVICE_ATTR(power1_crit_alarm, S_IRUGO, ina209_show_alarm, NULL,
|
|
1 << 8);
|
|
|
|
/* Current */
|
|
static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina209_show_value, NULL,
|
|
INA209_CURRENT);
|
|
|
|
static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR,
|
|
ina209_show_interval, ina209_set_interval, 0);
|
|
|
|
/*
|
|
* Finally, construct an array of pointers to members of the above objects,
|
|
* as required for sysfs_create_group()
|
|
*/
|
|
static struct attribute *ina209_attributes[] = {
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in0_input_highest.dev_attr.attr,
|
|
&sensor_dev_attr_in0_input_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_in0_reset_history.dev_attr.attr,
|
|
&sensor_dev_attr_in0_max.dev_attr.attr,
|
|
&sensor_dev_attr_in0_min.dev_attr.attr,
|
|
&sensor_dev_attr_in0_crit_max.dev_attr.attr,
|
|
&sensor_dev_attr_in0_crit_min.dev_attr.attr,
|
|
&sensor_dev_attr_in0_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in0_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in0_crit_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in0_crit_min_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input_highest.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input_lowest.dev_attr.attr,
|
|
&sensor_dev_attr_in1_reset_history.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_crit_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_crit_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_crit_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_crit_min_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_power1_input.dev_attr.attr,
|
|
&sensor_dev_attr_power1_input_highest.dev_attr.attr,
|
|
&sensor_dev_attr_power1_reset_history.dev_attr.attr,
|
|
&sensor_dev_attr_power1_max.dev_attr.attr,
|
|
&sensor_dev_attr_power1_crit.dev_attr.attr,
|
|
&sensor_dev_attr_power1_max_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_power1_crit_alarm.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_curr1_input.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_update_interval.dev_attr.attr,
|
|
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group ina209_group = {
|
|
.attrs = ina209_attributes,
|
|
};
|
|
|
|
static void ina209_restore_conf(struct i2c_client *client,
|
|
struct ina209_data *data)
|
|
{
|
|
/* Restore initial configuration */
|
|
i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION,
|
|
data->config_orig);
|
|
i2c_smbus_write_word_swapped(client, INA209_CALIBRATION,
|
|
data->calibration_orig);
|
|
}
|
|
|
|
static int ina209_init_client(struct i2c_client *client,
|
|
struct ina209_data *data)
|
|
{
|
|
struct ina2xx_platform_data *pdata = dev_get_platdata(&client->dev);
|
|
u32 shunt;
|
|
int reg;
|
|
|
|
reg = i2c_smbus_read_word_swapped(client, INA209_CALIBRATION);
|
|
if (reg < 0)
|
|
return reg;
|
|
data->calibration_orig = reg;
|
|
|
|
reg = i2c_smbus_read_word_swapped(client, INA209_CONFIGURATION);
|
|
if (reg < 0)
|
|
return reg;
|
|
data->config_orig = reg;
|
|
|
|
if (pdata) {
|
|
if (pdata->shunt_uohms <= 0)
|
|
return -EINVAL;
|
|
shunt = pdata->shunt_uohms;
|
|
} else if (!of_property_read_u32(client->dev.of_node, "shunt-resistor",
|
|
&shunt)) {
|
|
if (shunt == 0)
|
|
return -EINVAL;
|
|
} else {
|
|
shunt = data->calibration_orig ?
|
|
40960000 / data->calibration_orig : INA209_SHUNT_DEFAULT;
|
|
}
|
|
|
|
i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION,
|
|
INA209_CONFIG_DEFAULT);
|
|
data->update_interval = ina209_interval_from_reg(INA209_CONFIG_DEFAULT);
|
|
|
|
/*
|
|
* Calibrate current LSB to 1mA. Shunt is in uOhms.
|
|
* See equation 13 in datasheet.
|
|
*/
|
|
i2c_smbus_write_word_swapped(client, INA209_CALIBRATION,
|
|
clamp_val(40960000 / shunt, 1, 65535));
|
|
|
|
/* Clear status register */
|
|
i2c_smbus_read_word_swapped(client, INA209_STATUS);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ina209_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
struct ina209_data *data;
|
|
int ret;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
mutex_init(&data->update_lock);
|
|
|
|
ret = ina209_init_client(client, data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Register sysfs hooks */
|
|
ret = sysfs_create_group(&client->dev.kobj, &ina209_group);
|
|
if (ret)
|
|
goto out_restore_conf;
|
|
|
|
data->hwmon_dev = hwmon_device_register(&client->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
ret = PTR_ERR(data->hwmon_dev);
|
|
goto out_hwmon_device_register;
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_hwmon_device_register:
|
|
sysfs_remove_group(&client->dev.kobj, &ina209_group);
|
|
out_restore_conf:
|
|
ina209_restore_conf(client, data);
|
|
return ret;
|
|
}
|
|
|
|
static int ina209_remove(struct i2c_client *client)
|
|
{
|
|
struct ina209_data *data = i2c_get_clientdata(client);
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&client->dev.kobj, &ina209_group);
|
|
ina209_restore_conf(client, data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ina209_id[] = {
|
|
{ "ina209", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ina209_id);
|
|
|
|
/* This is the driver that will be inserted */
|
|
static struct i2c_driver ina209_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "ina209",
|
|
},
|
|
.probe = ina209_probe,
|
|
.remove = ina209_remove,
|
|
.id_table = ina209_id,
|
|
};
|
|
|
|
module_i2c_driver(ina209_driver);
|
|
|
|
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>, Paul Hays <Paul.Hays@cattail.ca>, Guenter Roeck <linux@roeck-us.net>");
|
|
MODULE_DESCRIPTION("INA209 driver");
|
|
MODULE_LICENSE("GPL");
|