mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
Currently, port configuration reporting has the following problems. * iomapped address is reported instead of raw address * report contains irrelevant fields or lacks necessary fields for non-SFF controllers. * host->irq/irq2 are there just for reporting and hacky. This patch implements and uses ata_port_desc() and ata_port_pbar_desc(). ata_port_desc() is almost identical to ata_ehi_push_desc() except that it takes @ap instead of @ehi, has no locking requirement, can only be used during host initialization and " " is used as separator instead of ", ". ata_port_pbar_desc() is a helper to ease reporting of a PCI BAR or an offsetted address into it. LLD pushes whatever description it wants using the above two functions. The accumulated description is printed on host registration after "[S/P]ATA max MAX_XFERMODE ". SFF init helpers and ata_host_activate() automatically add descriptions for addresses and irq respectively, so only LLDs which isn't standard SFF need to add custom descriptions. In many cases, such controllers need to report different things anyway. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
970 lines
25 KiB
C
970 lines
25 KiB
C
/*
|
|
* pata-legacy.c - Legacy port PATA/SATA controller driver.
|
|
* Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* An ATA driver for the legacy ATA ports.
|
|
*
|
|
* Data Sources:
|
|
* Opti 82C465/82C611 support: Data sheets at opti-inc.com
|
|
* HT6560 series:
|
|
* Promise 20230/20620:
|
|
* http://www.ryston.cz/petr/vlb/pdc20230b.html
|
|
* http://www.ryston.cz/petr/vlb/pdc20230c.html
|
|
* http://www.ryston.cz/petr/vlb/pdc20630.html
|
|
*
|
|
* Unsupported but docs exist:
|
|
* Appian/Adaptec AIC25VL01/Cirrus Logic PD7220
|
|
* Winbond W83759A
|
|
*
|
|
* This driver handles legacy (that is "ISA/VLB side") IDE ports found
|
|
* on PC class systems. There are three hybrid devices that are exceptions
|
|
* The Cyrix 5510/5520 where a pre SFF ATA device is on the bridge and
|
|
* the MPIIX where the tuning is PCI side but the IDE is "ISA side".
|
|
*
|
|
* Specific support is included for the ht6560a/ht6560b/opti82c611a/
|
|
* opti82c465mv/promise 20230c/20630
|
|
*
|
|
* Use the autospeed and pio_mask options with:
|
|
* Appian ADI/2 aka CLPD7220 or AIC25VL01.
|
|
* Use the jumpers, autospeed and set pio_mask to the mode on the jumpers with
|
|
* Goldstar GM82C711, PIC-1288A-125, UMC 82C871F, Winbond W83759,
|
|
* Winbond W83759A, Promise PDC20230-B
|
|
*
|
|
* For now use autospeed and pio_mask as above with the W83759A. This may
|
|
* change.
|
|
*
|
|
* TODO
|
|
* Merge existing pata_qdi driver
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/ata.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#define DRV_NAME "pata_legacy"
|
|
#define DRV_VERSION "0.5.5"
|
|
|
|
#define NR_HOST 6
|
|
|
|
static int legacy_port[NR_HOST] = { 0x1f0, 0x170, 0x1e8, 0x168, 0x1e0, 0x160 };
|
|
static int legacy_irq[NR_HOST] = { 14, 15, 11, 10, 8, 12 };
|
|
|
|
struct legacy_data {
|
|
unsigned long timing;
|
|
u8 clock[2];
|
|
u8 last;
|
|
int fast;
|
|
struct platform_device *platform_dev;
|
|
|
|
};
|
|
|
|
static struct legacy_data legacy_data[NR_HOST];
|
|
static struct ata_host *legacy_host[NR_HOST];
|
|
static int nr_legacy_host;
|
|
|
|
|
|
static int probe_all; /* Set to check all ISA port ranges */
|
|
static int ht6560a; /* HT 6560A on primary 1, secondary 2, both 3 */
|
|
static int ht6560b; /* HT 6560A on primary 1, secondary 2, both 3 */
|
|
static int opti82c611a; /* Opti82c611A on primary 1, secondary 2, both 3 */
|
|
static int opti82c46x; /* Opti 82c465MV present (pri/sec autodetect) */
|
|
static int autospeed; /* Chip present which snoops speed changes */
|
|
static int pio_mask = 0x1F; /* PIO range for autospeed devices */
|
|
static int iordy_mask = 0xFFFFFFFF; /* Use iordy if available */
|
|
|
|
/**
|
|
* legacy_set_mode - mode setting
|
|
* @link: IDE link
|
|
* @unused: Device that failed when error is returned
|
|
*
|
|
* Use a non standard set_mode function. We don't want to be tuned.
|
|
*
|
|
* The BIOS configured everything. Our job is not to fiddle. Just use
|
|
* whatever PIO the hardware is using and leave it at that. When we
|
|
* get some kind of nice user driven API for control then we can
|
|
* expand on this as per hdparm in the base kernel.
|
|
*/
|
|
|
|
static int legacy_set_mode(struct ata_link *link, struct ata_device **unused)
|
|
{
|
|
struct ata_device *dev;
|
|
|
|
ata_link_for_each_dev(dev, link) {
|
|
if (ata_dev_enabled(dev)) {
|
|
ata_dev_printk(dev, KERN_INFO, "configured for PIO\n");
|
|
dev->pio_mode = XFER_PIO_0;
|
|
dev->xfer_mode = XFER_PIO_0;
|
|
dev->xfer_shift = ATA_SHIFT_PIO;
|
|
dev->flags |= ATA_DFLAG_PIO;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct scsi_host_template legacy_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
};
|
|
|
|
/*
|
|
* These ops are used if the user indicates the hardware
|
|
* snoops the commands to decide on the mode and handles the
|
|
* mode selection "magically" itself. Several legacy controllers
|
|
* do this. The mode range can be set if it is not 0x1F by setting
|
|
* pio_mask as well.
|
|
*/
|
|
|
|
static struct ata_port_operations simple_port_ops = {
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer_noirq,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
static struct ata_port_operations legacy_port_ops = {
|
|
.set_mode = legacy_set_mode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer_noirq,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
/*
|
|
* Promise 20230C and 20620 support
|
|
*
|
|
* This controller supports PIO0 to PIO2. We set PIO timings conservatively to
|
|
* allow for 50MHz Vesa Local Bus. The 20620 DMA support is weird being DMA to
|
|
* controller and PIO'd to the host and not supported.
|
|
*/
|
|
|
|
static void pdc20230_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
int tries = 5;
|
|
int pio = adev->pio_mode - XFER_PIO_0;
|
|
u8 rt;
|
|
unsigned long flags;
|
|
|
|
/* Safe as UP only. Force I/Os to occur together */
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Unlock the control interface */
|
|
do
|
|
{
|
|
inb(0x1F5);
|
|
outb(inb(0x1F2) | 0x80, 0x1F2);
|
|
inb(0x1F2);
|
|
inb(0x3F6);
|
|
inb(0x3F6);
|
|
inb(0x1F2);
|
|
inb(0x1F2);
|
|
}
|
|
while((inb(0x1F2) & 0x80) && --tries);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
outb(inb(0x1F4) & 0x07, 0x1F4);
|
|
|
|
rt = inb(0x1F3);
|
|
rt &= 0x07 << (3 * adev->devno);
|
|
if (pio)
|
|
rt |= (1 + 3 * pio) << (3 * adev->devno);
|
|
|
|
udelay(100);
|
|
outb(inb(0x1F2) | 0x01, 0x1F2);
|
|
udelay(100);
|
|
inb(0x1F5);
|
|
|
|
}
|
|
|
|
static void pdc_data_xfer_vlb(struct ata_device *adev, unsigned char *buf, unsigned int buflen, int write_data)
|
|
{
|
|
struct ata_port *ap = adev->link->ap;
|
|
int slop = buflen & 3;
|
|
unsigned long flags;
|
|
|
|
if (ata_id_has_dword_io(adev->id)) {
|
|
local_irq_save(flags);
|
|
|
|
/* Perform the 32bit I/O synchronization sequence */
|
|
ioread8(ap->ioaddr.nsect_addr);
|
|
ioread8(ap->ioaddr.nsect_addr);
|
|
ioread8(ap->ioaddr.nsect_addr);
|
|
|
|
/* Now the data */
|
|
|
|
if (write_data)
|
|
iowrite32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
|
else
|
|
ioread32_rep(ap->ioaddr.data_addr, buf, buflen >> 2);
|
|
|
|
if (unlikely(slop)) {
|
|
u32 pad;
|
|
if (write_data) {
|
|
memcpy(&pad, buf + buflen - slop, slop);
|
|
pad = le32_to_cpu(pad);
|
|
iowrite32(pad, ap->ioaddr.data_addr);
|
|
} else {
|
|
pad = ioread32(ap->ioaddr.data_addr);
|
|
pad = cpu_to_le16(pad);
|
|
memcpy(buf + buflen - slop, &pad, slop);
|
|
}
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
else
|
|
ata_data_xfer_noirq(adev, buf, buflen, write_data);
|
|
}
|
|
|
|
static struct ata_port_operations pdc20230_port_ops = {
|
|
.set_piomode = pdc20230_set_piomode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = pdc_data_xfer_vlb,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
/*
|
|
* Holtek 6560A support
|
|
*
|
|
* This controller supports PIO0 to PIO2 (no IORDY even though higher timings
|
|
* can be loaded).
|
|
*/
|
|
|
|
static void ht6560a_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
u8 active, recover;
|
|
struct ata_timing t;
|
|
|
|
/* Get the timing data in cycles. For now play safe at 50Mhz */
|
|
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
|
|
|
|
active = FIT(t.active, 2, 15);
|
|
recover = FIT(t.recover, 4, 15);
|
|
|
|
inb(0x3E6);
|
|
inb(0x3E6);
|
|
inb(0x3E6);
|
|
inb(0x3E6);
|
|
|
|
iowrite8(recover << 4 | active, ap->ioaddr.device_addr);
|
|
ioread8(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
static struct ata_port_operations ht6560a_port_ops = {
|
|
.set_piomode = ht6560a_set_piomode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer, /* Check vlb/noirq */
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
/*
|
|
* Holtek 6560B support
|
|
*
|
|
* This controller supports PIO0 to PIO4. We honour the BIOS/jumper FIFO setting
|
|
* unless we see an ATAPI device in which case we force it off.
|
|
*
|
|
* FIXME: need to implement 2nd channel support.
|
|
*/
|
|
|
|
static void ht6560b_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
u8 active, recover;
|
|
struct ata_timing t;
|
|
|
|
/* Get the timing data in cycles. For now play safe at 50Mhz */
|
|
ata_timing_compute(adev, adev->pio_mode, &t, 20000, 1000);
|
|
|
|
active = FIT(t.active, 2, 15);
|
|
recover = FIT(t.recover, 2, 16);
|
|
recover &= 0x15;
|
|
|
|
inb(0x3E6);
|
|
inb(0x3E6);
|
|
inb(0x3E6);
|
|
inb(0x3E6);
|
|
|
|
iowrite8(recover << 4 | active, ap->ioaddr.device_addr);
|
|
|
|
if (adev->class != ATA_DEV_ATA) {
|
|
u8 rconf = inb(0x3E6);
|
|
if (rconf & 0x24) {
|
|
rconf &= ~ 0x24;
|
|
outb(rconf, 0x3E6);
|
|
}
|
|
}
|
|
ioread8(ap->ioaddr.status_addr);
|
|
}
|
|
|
|
static struct ata_port_operations ht6560b_port_ops = {
|
|
.set_piomode = ht6560b_set_piomode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer, /* FIXME: Check 32bit and noirq */
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
/*
|
|
* Opti core chipset helpers
|
|
*/
|
|
|
|
/**
|
|
* opti_syscfg - read OPTI chipset configuration
|
|
* @reg: Configuration register to read
|
|
*
|
|
* Returns the value of an OPTI system board configuration register.
|
|
*/
|
|
|
|
static u8 opti_syscfg(u8 reg)
|
|
{
|
|
unsigned long flags;
|
|
u8 r;
|
|
|
|
/* Uniprocessor chipset and must force cycles adjancent */
|
|
local_irq_save(flags);
|
|
outb(reg, 0x22);
|
|
r = inb(0x24);
|
|
local_irq_restore(flags);
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Opti 82C611A
|
|
*
|
|
* This controller supports PIO0 to PIO3.
|
|
*/
|
|
|
|
static void opti82c611a_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
u8 active, recover, setup;
|
|
struct ata_timing t;
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
int clock;
|
|
int khz[4] = { 50000, 40000, 33000, 25000 };
|
|
u8 rc;
|
|
|
|
/* Enter configuration mode */
|
|
ioread16(ap->ioaddr.error_addr);
|
|
ioread16(ap->ioaddr.error_addr);
|
|
iowrite8(3, ap->ioaddr.nsect_addr);
|
|
|
|
/* Read VLB clock strapping */
|
|
clock = 1000000000 / khz[ioread8(ap->ioaddr.lbah_addr) & 0x03];
|
|
|
|
/* Get the timing data in cycles */
|
|
ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
|
|
|
|
/* Setup timing is shared */
|
|
if (pair) {
|
|
struct ata_timing tp;
|
|
ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
|
|
|
|
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
|
|
}
|
|
|
|
active = FIT(t.active, 2, 17) - 2;
|
|
recover = FIT(t.recover, 1, 16) - 1;
|
|
setup = FIT(t.setup, 1, 4) - 1;
|
|
|
|
/* Select the right timing bank for write timing */
|
|
rc = ioread8(ap->ioaddr.lbal_addr);
|
|
rc &= 0x7F;
|
|
rc |= (adev->devno << 7);
|
|
iowrite8(rc, ap->ioaddr.lbal_addr);
|
|
|
|
/* Write the timings */
|
|
iowrite8(active << 4 | recover, ap->ioaddr.error_addr);
|
|
|
|
/* Select the right bank for read timings, also
|
|
load the shared timings for address */
|
|
rc = ioread8(ap->ioaddr.device_addr);
|
|
rc &= 0xC0;
|
|
rc |= adev->devno; /* Index select */
|
|
rc |= (setup << 4) | 0x04;
|
|
iowrite8(rc, ap->ioaddr.device_addr);
|
|
|
|
/* Load the read timings */
|
|
iowrite8(active << 4 | recover, ap->ioaddr.data_addr);
|
|
|
|
/* Ensure the timing register mode is right */
|
|
rc = ioread8(ap->ioaddr.lbal_addr);
|
|
rc &= 0x73;
|
|
rc |= 0x84;
|
|
iowrite8(rc, ap->ioaddr.lbal_addr);
|
|
|
|
/* Exit command mode */
|
|
iowrite8(0x83, ap->ioaddr.nsect_addr);
|
|
}
|
|
|
|
|
|
static struct ata_port_operations opti82c611a_port_ops = {
|
|
.set_piomode = opti82c611a_set_piomode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = ata_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
/*
|
|
* Opti 82C465MV
|
|
*
|
|
* This controller supports PIO0 to PIO3. Unlike the 611A the MVB
|
|
* version is dual channel but doesn't have a lot of unique registers.
|
|
*/
|
|
|
|
static void opti82c46x_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
u8 active, recover, setup;
|
|
struct ata_timing t;
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
int clock;
|
|
int khz[4] = { 50000, 40000, 33000, 25000 };
|
|
u8 rc;
|
|
u8 sysclk;
|
|
|
|
/* Get the clock */
|
|
sysclk = opti_syscfg(0xAC) & 0xC0; /* BIOS set */
|
|
|
|
/* Enter configuration mode */
|
|
ioread16(ap->ioaddr.error_addr);
|
|
ioread16(ap->ioaddr.error_addr);
|
|
iowrite8(3, ap->ioaddr.nsect_addr);
|
|
|
|
/* Read VLB clock strapping */
|
|
clock = 1000000000 / khz[sysclk];
|
|
|
|
/* Get the timing data in cycles */
|
|
ata_timing_compute(adev, adev->pio_mode, &t, clock, 1000);
|
|
|
|
/* Setup timing is shared */
|
|
if (pair) {
|
|
struct ata_timing tp;
|
|
ata_timing_compute(pair, pair->pio_mode, &tp, clock, 1000);
|
|
|
|
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
|
|
}
|
|
|
|
active = FIT(t.active, 2, 17) - 2;
|
|
recover = FIT(t.recover, 1, 16) - 1;
|
|
setup = FIT(t.setup, 1, 4) - 1;
|
|
|
|
/* Select the right timing bank for write timing */
|
|
rc = ioread8(ap->ioaddr.lbal_addr);
|
|
rc &= 0x7F;
|
|
rc |= (adev->devno << 7);
|
|
iowrite8(rc, ap->ioaddr.lbal_addr);
|
|
|
|
/* Write the timings */
|
|
iowrite8(active << 4 | recover, ap->ioaddr.error_addr);
|
|
|
|
/* Select the right bank for read timings, also
|
|
load the shared timings for address */
|
|
rc = ioread8(ap->ioaddr.device_addr);
|
|
rc &= 0xC0;
|
|
rc |= adev->devno; /* Index select */
|
|
rc |= (setup << 4) | 0x04;
|
|
iowrite8(rc, ap->ioaddr.device_addr);
|
|
|
|
/* Load the read timings */
|
|
iowrite8(active << 4 | recover, ap->ioaddr.data_addr);
|
|
|
|
/* Ensure the timing register mode is right */
|
|
rc = ioread8(ap->ioaddr.lbal_addr);
|
|
rc &= 0x73;
|
|
rc |= 0x84;
|
|
iowrite8(rc, ap->ioaddr.lbal_addr);
|
|
|
|
/* Exit command mode */
|
|
iowrite8(0x83, ap->ioaddr.nsect_addr);
|
|
|
|
/* We need to know this for quad device on the MVB */
|
|
ap->host->private_data = ap;
|
|
}
|
|
|
|
/**
|
|
* opt82c465mv_qc_issue_prot - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings. The
|
|
* MVB has a single set of timing registers and these are shared
|
|
* across channels. As there are two registers we really ought to
|
|
* track the last two used values as a sort of register window. For
|
|
* now we just reload on a channel switch. On the single channel
|
|
* setup this condition never fires so we do nothing extra.
|
|
*
|
|
* FIXME: dual channel needs ->serialize support
|
|
*/
|
|
|
|
static unsigned int opti82c46x_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
/* If timings are set and for the wrong channel (2nd test is
|
|
due to a libata shortcoming and will eventually go I hope) */
|
|
if (ap->host->private_data != ap->host
|
|
&& ap->host->private_data != NULL)
|
|
opti82c46x_set_piomode(ap, adev);
|
|
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
static struct ata_port_operations opti82c46x_port_ops = {
|
|
.set_piomode = opti82c46x_set_piomode,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = ata_bmdma_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
.cable_detect = ata_cable_40wire,
|
|
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = opti82c46x_qc_issue_prot,
|
|
|
|
.data_xfer = ata_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
.irq_on = ata_irq_on,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
|
|
/**
|
|
* legacy_init_one - attach a legacy interface
|
|
* @port: port number
|
|
* @io: I/O port start
|
|
* @ctrl: control port
|
|
* @irq: interrupt line
|
|
*
|
|
* Register an ISA bus IDE interface. Such interfaces are PIO and we
|
|
* assume do not support IRQ sharing.
|
|
*/
|
|
|
|
static __init int legacy_init_one(int port, unsigned long io, unsigned long ctrl, int irq)
|
|
{
|
|
struct legacy_data *ld = &legacy_data[nr_legacy_host];
|
|
struct ata_host *host;
|
|
struct ata_port *ap;
|
|
struct platform_device *pdev;
|
|
struct ata_port_operations *ops = &legacy_port_ops;
|
|
void __iomem *io_addr, *ctrl_addr;
|
|
int pio_modes = pio_mask;
|
|
u32 mask = (1 << port);
|
|
u32 iordy = (iordy_mask & mask) ? 0: ATA_FLAG_NO_IORDY;
|
|
int ret;
|
|
|
|
pdev = platform_device_register_simple(DRV_NAME, nr_legacy_host, NULL, 0);
|
|
if (IS_ERR(pdev))
|
|
return PTR_ERR(pdev);
|
|
|
|
ret = -EBUSY;
|
|
if (devm_request_region(&pdev->dev, io, 8, "pata_legacy") == NULL ||
|
|
devm_request_region(&pdev->dev, ctrl, 1, "pata_legacy") == NULL)
|
|
goto fail;
|
|
|
|
ret = -ENOMEM;
|
|
io_addr = devm_ioport_map(&pdev->dev, io, 8);
|
|
ctrl_addr = devm_ioport_map(&pdev->dev, ctrl, 1);
|
|
if (!io_addr || !ctrl_addr)
|
|
goto fail;
|
|
|
|
if (ht6560a & mask) {
|
|
ops = &ht6560a_port_ops;
|
|
pio_modes = 0x07;
|
|
iordy = ATA_FLAG_NO_IORDY;
|
|
}
|
|
if (ht6560b & mask) {
|
|
ops = &ht6560b_port_ops;
|
|
pio_modes = 0x1F;
|
|
}
|
|
if (opti82c611a & mask) {
|
|
ops = &opti82c611a_port_ops;
|
|
pio_modes = 0x0F;
|
|
}
|
|
if (opti82c46x & mask) {
|
|
ops = &opti82c46x_port_ops;
|
|
pio_modes = 0x0F;
|
|
}
|
|
|
|
/* Probe for automatically detectable controllers */
|
|
|
|
if (io == 0x1F0 && ops == &legacy_port_ops) {
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
|
|
/* Probes */
|
|
inb(0x1F5);
|
|
outb(inb(0x1F2) | 0x80, 0x1F2);
|
|
inb(0x1F2);
|
|
inb(0x3F6);
|
|
inb(0x3F6);
|
|
inb(0x1F2);
|
|
inb(0x1F2);
|
|
|
|
if ((inb(0x1F2) & 0x80) == 0) {
|
|
/* PDC20230c or 20630 ? */
|
|
printk(KERN_INFO "PDC20230-C/20630 VLB ATA controller detected.\n");
|
|
pio_modes = 0x07;
|
|
ops = &pdc20230_port_ops;
|
|
iordy = ATA_FLAG_NO_IORDY;
|
|
udelay(100);
|
|
inb(0x1F5);
|
|
} else {
|
|
outb(0x55, 0x1F2);
|
|
inb(0x1F2);
|
|
inb(0x1F2);
|
|
if (inb(0x1F2) == 0x00) {
|
|
printk(KERN_INFO "PDC20230-B VLB ATA controller detected.\n");
|
|
}
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
|
|
/* Chip does mode setting by command snooping */
|
|
if (ops == &legacy_port_ops && (autospeed & mask))
|
|
ops = &simple_port_ops;
|
|
|
|
ret = -ENOMEM;
|
|
host = ata_host_alloc(&pdev->dev, 1);
|
|
if (!host)
|
|
goto fail;
|
|
ap = host->ports[0];
|
|
|
|
ap->ops = ops;
|
|
ap->pio_mask = pio_modes;
|
|
ap->flags |= ATA_FLAG_SLAVE_POSS | iordy;
|
|
ap->ioaddr.cmd_addr = io_addr;
|
|
ap->ioaddr.altstatus_addr = ctrl_addr;
|
|
ap->ioaddr.ctl_addr = ctrl_addr;
|
|
ata_std_ports(&ap->ioaddr);
|
|
ap->private_data = ld;
|
|
|
|
ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", io, ctrl);
|
|
|
|
ret = ata_host_activate(host, irq, ata_interrupt, 0, &legacy_sht);
|
|
if (ret)
|
|
goto fail;
|
|
|
|
legacy_host[nr_legacy_host++] = dev_get_drvdata(&pdev->dev);
|
|
ld->platform_dev = pdev;
|
|
return 0;
|
|
|
|
fail:
|
|
platform_device_unregister(pdev);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* legacy_check_special_cases - ATA special cases
|
|
* @p: PCI device to check
|
|
* @master: set this if we find an ATA master
|
|
* @master: set this if we find an ATA secondary
|
|
*
|
|
* A small number of vendors implemented early PCI ATA interfaces on bridge logic
|
|
* without the ATA interface being PCI visible. Where we have a matching PCI driver
|
|
* we must skip the relevant device here. If we don't know about it then the legacy
|
|
* driver is the right driver anyway.
|
|
*/
|
|
|
|
static void legacy_check_special_cases(struct pci_dev *p, int *primary, int *secondary)
|
|
{
|
|
/* Cyrix CS5510 pre SFF MWDMA ATA on the bridge */
|
|
if (p->vendor == 0x1078 && p->device == 0x0000) {
|
|
*primary = *secondary = 1;
|
|
return;
|
|
}
|
|
/* Cyrix CS5520 pre SFF MWDMA ATA on the bridge */
|
|
if (p->vendor == 0x1078 && p->device == 0x0002) {
|
|
*primary = *secondary = 1;
|
|
return;
|
|
}
|
|
/* Intel MPIIX - PIO ATA on non PCI side of bridge */
|
|
if (p->vendor == 0x8086 && p->device == 0x1234) {
|
|
u16 r;
|
|
pci_read_config_word(p, 0x6C, &r);
|
|
if (r & 0x8000) { /* ATA port enabled */
|
|
if (r & 0x4000)
|
|
*secondary = 1;
|
|
else
|
|
*primary = 1;
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* legacy_init - attach legacy interfaces
|
|
*
|
|
* Attach legacy IDE interfaces by scanning the usual IRQ/port suspects.
|
|
* Right now we do not scan the ide0 and ide1 address but should do so
|
|
* for non PCI systems or systems with no PCI IDE legacy mode devices.
|
|
* If you fix that note there are special cases to consider like VLB
|
|
* drivers and CS5510/20.
|
|
*/
|
|
|
|
static __init int legacy_init(void)
|
|
{
|
|
int i;
|
|
int ct = 0;
|
|
int primary = 0;
|
|
int secondary = 0;
|
|
int last_port = NR_HOST;
|
|
|
|
struct pci_dev *p = NULL;
|
|
|
|
for_each_pci_dev(p) {
|
|
int r;
|
|
/* Check for any overlap of the system ATA mappings. Native mode controllers
|
|
stuck on these addresses or some devices in 'raid' mode won't be found by
|
|
the storage class test */
|
|
for (r = 0; r < 6; r++) {
|
|
if (pci_resource_start(p, r) == 0x1f0)
|
|
primary = 1;
|
|
if (pci_resource_start(p, r) == 0x170)
|
|
secondary = 1;
|
|
}
|
|
/* Check for special cases */
|
|
legacy_check_special_cases(p, &primary, &secondary);
|
|
|
|
/* If PCI bus is present then don't probe for tertiary legacy ports */
|
|
if (probe_all == 0)
|
|
last_port = 2;
|
|
}
|
|
|
|
/* If an OPTI 82C46X is present find out where the channels are */
|
|
if (opti82c46x) {
|
|
static const char *optis[4] = {
|
|
"3/463MV", "5MV",
|
|
"5MVA", "5MVB"
|
|
};
|
|
u8 chans = 1;
|
|
u8 ctrl = (opti_syscfg(0x30) & 0xC0) >> 6;
|
|
|
|
opti82c46x = 3; /* Assume master and slave first */
|
|
printk(KERN_INFO DRV_NAME ": Opti 82C46%s chipset support.\n", optis[ctrl]);
|
|
if (ctrl == 3)
|
|
chans = (opti_syscfg(0x3F) & 0x20) ? 2 : 1;
|
|
ctrl = opti_syscfg(0xAC);
|
|
/* Check enabled and this port is the 465MV port. On the
|
|
MVB we may have two channels */
|
|
if (ctrl & 8) {
|
|
if (ctrl & 4)
|
|
opti82c46x = 2; /* Slave */
|
|
else
|
|
opti82c46x = 1; /* Master */
|
|
if (chans == 2)
|
|
opti82c46x = 3; /* Master and Slave */
|
|
} /* Slave only */
|
|
else if (chans == 1)
|
|
opti82c46x = 1;
|
|
}
|
|
|
|
for (i = 0; i < last_port; i++) {
|
|
/* Skip primary if we have seen a PCI one */
|
|
if (i == 0 && primary == 1)
|
|
continue;
|
|
/* Skip secondary if we have seen a PCI one */
|
|
if (i == 1 && secondary == 1)
|
|
continue;
|
|
if (legacy_init_one(i, legacy_port[i],
|
|
legacy_port[i] + 0x0206,
|
|
legacy_irq[i]) == 0)
|
|
ct++;
|
|
}
|
|
if (ct != 0)
|
|
return 0;
|
|
return -ENODEV;
|
|
}
|
|
|
|
static __exit void legacy_exit(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < nr_legacy_host; i++) {
|
|
struct legacy_data *ld = &legacy_data[i];
|
|
|
|
ata_host_detach(legacy_host[i]);
|
|
platform_device_unregister(ld->platform_dev);
|
|
if (ld->timing)
|
|
release_region(ld->timing, 2);
|
|
}
|
|
}
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for legacy ATA");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_param(probe_all, int, 0);
|
|
module_param(autospeed, int, 0);
|
|
module_param(ht6560a, int, 0);
|
|
module_param(ht6560b, int, 0);
|
|
module_param(opti82c611a, int, 0);
|
|
module_param(opti82c46x, int, 0);
|
|
module_param(pio_mask, int, 0);
|
|
module_param(iordy_mask, int, 0);
|
|
|
|
module_init(legacy_init);
|
|
module_exit(legacy_exit);
|
|
|