linux-stable/arch/arm/mach-pxa
Eric Miao 15fbc93857 [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working
GPIO17_SDATA_IN_1 and GPIO36_SDATA_IN_1 are originally designed for the 2nd
codec but unused on the board, yet they are initialized incorrectly by the
bootloader as the SDATA_IN_1 alternate function, thus causing AC97 fail to
work. Fix this issue by configuring these pins as normal GPIO to avoid the
noise from these pins being treated as signals from the 2nd codec.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
2009-04-27 11:46:30 +08:00
..
include/mach [ARM] pxa/palm27x: General fix for Palm27x aSoC driver 2009-04-19 21:56:54 +08:00
am200epd.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
am300epd.c [ARM] 5354/1: mach-pxa: add AM300 platform driver v3 2009-02-10 11:28:00 +00:00
clock.c [ARM] pxa: make second argument of clk_add_alias a name instead of the device 2009-03-19 16:20:39 +08:00
clock.h [ARM] pxa: make second argument of clk_add_alias a name instead of the device 2009-03-19 16:20:39 +08:00
cm-x2xx-pci.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
cm-x2xx-pci.h [ARM] 5280/1: pxa: prepare cm-x2xx.c and cm-x2xx-pci.[ch] for addition of CM-X255 2008-10-07 12:05:05 +01:00
cm-x2xx.c [ARM] pxa/cm-x2xx: fix ucb1400 not being registered 2009-04-04 10:26:34 +08:00
cm-x255.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cm-x270.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cm-x300.c [ARM] pxa: add DM9000_PLATF_NO_EEPROM flag to CM-X... platforms 2009-03-09 21:22:40 +08:00
colibri-pxa3xx.c [ARM] pxa/colibri: provide MAC address from ATAG_SERIAL 2009-04-04 10:26:34 +08:00
colibri-pxa270.c [ARM] pxa: rename colibri.c to colibri-pxa270.c 2009-03-23 09:57:54 +08:00
colibri-pxa300.c [ARM] pxa/colibri: get rid of set_irq_type() 2009-04-04 10:26:34 +08:00
colibri-pxa320.c [ARM] pxa/colibri: get rid of set_irq_type() 2009-04-04 10:26:34 +08:00
corgi.c [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC 2009-04-27 11:45:53 +08:00
corgi_lcd.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi_pm.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
corgi_ssp.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
cpufreq-pxa2xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
cpufreq-pxa3xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c [ARM] pxa: add initial support for Cogent CSB726 board 2009-03-13 17:10:44 +08:00
devices.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
devices.h [ARM] pxa: add resources for incoming rtc-pxa driver 2008-12-02 14:43:47 +08:00
e330.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e350.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e400.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
e740.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
e750.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
e800.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
em-x270.c [ARM] pxa/em-x270: remove duplicated #include 2009-04-14 22:55:36 +08:00
eseries.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
eseries.h [ARM] pxa: Add multi-io support for e-series 2008-12-15 03:29:34 +00:00
ezx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
generic.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
generic.h [ARM] pxa: add missing declaration of pxa26x_init_irq() 2009-04-13 12:10:36 +08:00
gumstix.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
h5000.c Merge branch 'origin' into devel 2009-03-28 20:29:51 +00:00
himalaya.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
imote2.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
irq.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
Kconfig [ARM] pxa: Palm Tungsten E2 basic support 2009-04-04 10:26:33 +08:00
leds-idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-lubbock.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-mainstone.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds.c [ARM] 5251/1: remove old LED support for Trizeps4 SOM 2008-10-01 22:34:34 +01:00
leds.h
littleton.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
lpd270.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
lubbock.c [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
magician.c Merge branch 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6 2009-04-06 09:57:38 +01:00
mainstone.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
Makefile [ARM] pxa: Palm Tungsten E2 basic support 2009-04-04 10:26:33 +08:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: access GPIO registers by chip so to make it further generic 2009-03-09 21:22:38 +08:00
mfp-pxa3xx.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mioa701.c [ARM] pxa/mioa701: use GPIO95 as AC97 reset line 2009-04-15 10:54:06 +08:00
mioa701_bootresume.S [ARM] pxa/MioA701: fix memory corruption. 2008-11-22 20:57:21 +08:00
mp900.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
palmld.c [ARM] pxa/palm27x: General fix for Palm27x aSoC driver 2009-04-19 21:56:54 +08:00
palmt5.c [ARM] pxa/palm27x: General fix for Palm27x aSoC driver 2009-04-19 21:56:54 +08:00
palmte2.c [ARM] pxa: PalmTE2 support for battery, UDC, IrDA and backlight 2009-04-04 10:26:33 +08:00
palmtx.c [ARM] pxa/palm27x: General fix for Palm27x aSoC driver 2009-04-19 21:56:54 +08:00
palmz72.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pcm027.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pcm990-baseboard.c [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones 2009-04-19 21:57:10 +08:00
pm.c [ARM] pxa: make lubbock specific debugging stuffs back into lubbock.c 2009-03-09 21:22:40 +08:00
poodle.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
pwm.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
pxa2xx.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
pxa3xx.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa25x.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa27x.c [ARM] pxa: move IRQ handling of GPIO 0 and 1 outside of gpio.c 2009-03-09 21:22:37 +08:00
pxa300.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
pxa320.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
pxa930.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
reset.c [ARM] pass reboot command line to arch_reset() 2009-03-19 16:20:24 +00:00
saar.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
sharpsl.h
sharpsl_pm.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
sleep.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
smemc.c [ARM] pxa: avoid polluting the kernel's namespace 2008-11-28 16:04:54 +00:00
spitz.c [ARM] pxa: make ads7846 on corgi and spitz to sync on HSYNC 2009-04-27 11:45:53 +08:00
spitz_pm.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
ssp.c [ARM] pxa: remove unnecessary #include of pxa-regs.h and hardware.h 2009-03-09 21:22:38 +08:00
standby.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
tavorevb.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
time.c clocksource: pass clocksource to read() callback 2009-04-21 13:41:47 -07:00
tosa-bt.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
tosa.c [ARM] pxa: register AC97 controller devices 2009-04-04 21:54:40 +08:00
trizeps4.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
viper.c [ARM] pxa: move PCMCIA definitions out of pxa-regs.h into pxa2xx_base.c 2009-03-09 21:22:39 +08:00
zylonite.c [ARM] pxa: use <linux/gpio.h> instead of unnecessary <mach/gpio.h> 2008-12-02 14:42:37 +08:00
zylonite_pxa300.c [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working 2009-04-27 11:46:30 +08:00
zylonite_pxa320.c [ARM] pxa/zylonite: fix the issue of unused SDATA_IN_1 pin get AC97 not working 2009-04-27 11:46:30 +08:00