mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Guenter Roeck](/assets/img/avatar_default.png)
In HWiNFO, we see support for Tccd1, Tccd3, Tccd5, and Tccd7 temperature sensors on Zen2 based Threadripper CPUs. Checking register maps on Threadripper 3970X confirms SMN register addresses and values for those sensors. Register values observed in an idle system: 0x059950: 00000000 00000abc 00000000 00000ad8 0x059960: 00000000 00000ade 00000000 00000ae4 Under load: 0x059950: 00000000 00000c02 00000000 00000c14 0x059960: 00000000 00000c30 00000000 00000c22 More analysis shows that EPYC CPUs support up to 8 CCD temperature sensors. EPYC 7601 supports three CCD temperature sensors. Unlike Zen2 CPUs, the register space in Zen1 CPUs supports a maximum of four sensors, so only search for a maximum of four sensors on Zen1 CPUs. On top of that, in thm_10_0_sh_mask.h in the Linux kernel, we find definitions for THM_DIE{1-3}_TEMP__VALID_MASK, set to 0x00000800, as well as matching SMN addresses. This lets us conclude that bit 11 of the respective registers is a valid bit. With this assumption, the temperature offset is now 49 degrees C. This conveniently matches the documented temperature offset for Tdie, again suggesting that above registers indeed report temperatures sensor values. Assume that bit 11 is indeed a valid bit, and add support for the additional sensors. With this patch applied, output from 3970X (idle) looks as follows: k10temp-pci-00c3 Adapter: PCI adapter Tdie: +55.9°C Tctl: +55.9°C Tccd1: +39.8°C Tccd3: +43.8°C Tccd5: +43.8°C Tccd7: +44.8°C Tested-by: Michael Larabel <michael@phoronix.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
661 lines
17 KiB
C
661 lines
17 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h/17h
|
|
* processor hardware monitoring
|
|
*
|
|
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
|
|
* Copyright (c) 2020 Guenter Roeck <linux@roeck-us.net>
|
|
*
|
|
* Implementation notes:
|
|
* - CCD register address information as well as the calculation to
|
|
* convert raw register values is from https://github.com/ocerman/zenpower.
|
|
* The information is not confirmed from chip datasheets, but experiments
|
|
* suggest that it provides reasonable temperature values.
|
|
* - Register addresses to read chip voltage and current are also from
|
|
* https://github.com/ocerman/zenpower, and not confirmed from chip
|
|
* datasheets. Current calibration is board specific and not typically
|
|
* shared by board vendors. For this reason, current values are
|
|
* normalized to report 1A/LSB for core current and and 0.25A/LSB for SoC
|
|
* current. Reported values can be adjusted using the sensors configuration
|
|
* file.
|
|
*/
|
|
|
|
#include <linux/bitops.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pci_ids.h>
|
|
#include <asm/amd_nb.h>
|
|
#include <asm/processor.h>
|
|
|
|
MODULE_DESCRIPTION("AMD Family 10h+ CPU core temperature monitor");
|
|
MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static bool force;
|
|
module_param(force, bool, 0444);
|
|
MODULE_PARM_DESC(force, "force loading on processors with erratum 319");
|
|
|
|
/* Provide lock for writing to NB_SMU_IND_ADDR */
|
|
static DEFINE_MUTEX(nb_smu_ind_mutex);
|
|
|
|
#ifndef PCI_DEVICE_ID_AMD_15H_M70H_NB_F3
|
|
#define PCI_DEVICE_ID_AMD_15H_M70H_NB_F3 0x15b3
|
|
#endif
|
|
|
|
/* CPUID function 0x80000001, ebx */
|
|
#define CPUID_PKGTYPE_MASK GENMASK(31, 28)
|
|
#define CPUID_PKGTYPE_F 0x00000000
|
|
#define CPUID_PKGTYPE_AM2R2_AM3 0x10000000
|
|
|
|
/* DRAM controller (PCI function 2) */
|
|
#define REG_DCT0_CONFIG_HIGH 0x094
|
|
#define DDR3_MODE BIT(8)
|
|
|
|
/* miscellaneous (PCI function 3) */
|
|
#define REG_HARDWARE_THERMAL_CONTROL 0x64
|
|
#define HTC_ENABLE BIT(0)
|
|
|
|
#define REG_REPORTED_TEMPERATURE 0xa4
|
|
|
|
#define REG_NORTHBRIDGE_CAPABILITIES 0xe8
|
|
#define NB_CAP_HTC BIT(10)
|
|
|
|
/*
|
|
* For F15h M60h and M70h, REG_HARDWARE_THERMAL_CONTROL
|
|
* and REG_REPORTED_TEMPERATURE have been moved to
|
|
* D0F0xBC_xD820_0C64 [Hardware Temperature Control]
|
|
* D0F0xBC_xD820_0CA4 [Reported Temperature Control]
|
|
*/
|
|
#define F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET 0xd8200c64
|
|
#define F15H_M60H_REPORTED_TEMP_CTRL_OFFSET 0xd8200ca4
|
|
|
|
/* F17h M01h Access througn SMN */
|
|
#define F17H_M01H_REPORTED_TEMP_CTRL_OFFSET 0x00059800
|
|
|
|
#define F17H_M70H_CCD_TEMP(x) (0x00059954 + ((x) * 4))
|
|
#define F17H_M70H_CCD_TEMP_VALID BIT(11)
|
|
#define F17H_M70H_CCD_TEMP_MASK GENMASK(10, 0)
|
|
|
|
#define F17H_M01H_SVI 0x0005A000
|
|
#define F17H_M01H_SVI_TEL_PLANE0 (F17H_M01H_SVI + 0xc)
|
|
#define F17H_M01H_SVI_TEL_PLANE1 (F17H_M01H_SVI + 0x10)
|
|
|
|
#define CUR_TEMP_SHIFT 21
|
|
#define CUR_TEMP_RANGE_SEL_MASK BIT(19)
|
|
|
|
#define CFACTOR_ICORE 1000000 /* 1A / LSB */
|
|
#define CFACTOR_ISOC 250000 /* 0.25A / LSB */
|
|
|
|
struct k10temp_data {
|
|
struct pci_dev *pdev;
|
|
void (*read_htcreg)(struct pci_dev *pdev, u32 *regval);
|
|
void (*read_tempreg)(struct pci_dev *pdev, u32 *regval);
|
|
int temp_offset;
|
|
u32 temp_adjust_mask;
|
|
bool show_tdie;
|
|
u32 show_tccd;
|
|
u32 svi_addr[2];
|
|
bool show_current;
|
|
int cfactor[2];
|
|
};
|
|
|
|
struct tctl_offset {
|
|
u8 model;
|
|
char const *id;
|
|
int offset;
|
|
};
|
|
|
|
static const struct tctl_offset tctl_offset_table[] = {
|
|
{ 0x17, "AMD Ryzen 5 1600X", 20000 },
|
|
{ 0x17, "AMD Ryzen 7 1700X", 20000 },
|
|
{ 0x17, "AMD Ryzen 7 1800X", 20000 },
|
|
{ 0x17, "AMD Ryzen 7 2700X", 10000 },
|
|
{ 0x17, "AMD Ryzen Threadripper 19", 27000 }, /* 19{00,20,50}X */
|
|
{ 0x17, "AMD Ryzen Threadripper 29", 27000 }, /* 29{20,50,70,90}[W]X */
|
|
};
|
|
|
|
static bool is_threadripper(void)
|
|
{
|
|
return strstr(boot_cpu_data.x86_model_id, "Threadripper");
|
|
}
|
|
|
|
static bool is_epyc(void)
|
|
{
|
|
return strstr(boot_cpu_data.x86_model_id, "EPYC");
|
|
}
|
|
|
|
static void read_htcreg_pci(struct pci_dev *pdev, u32 *regval)
|
|
{
|
|
pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, regval);
|
|
}
|
|
|
|
static void read_tempreg_pci(struct pci_dev *pdev, u32 *regval)
|
|
{
|
|
pci_read_config_dword(pdev, REG_REPORTED_TEMPERATURE, regval);
|
|
}
|
|
|
|
static void amd_nb_index_read(struct pci_dev *pdev, unsigned int devfn,
|
|
unsigned int base, int offset, u32 *val)
|
|
{
|
|
mutex_lock(&nb_smu_ind_mutex);
|
|
pci_bus_write_config_dword(pdev->bus, devfn,
|
|
base, offset);
|
|
pci_bus_read_config_dword(pdev->bus, devfn,
|
|
base + 4, val);
|
|
mutex_unlock(&nb_smu_ind_mutex);
|
|
}
|
|
|
|
static void read_htcreg_nb_f15(struct pci_dev *pdev, u32 *regval)
|
|
{
|
|
amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
|
|
F15H_M60H_HARDWARE_TEMP_CTRL_OFFSET, regval);
|
|
}
|
|
|
|
static void read_tempreg_nb_f15(struct pci_dev *pdev, u32 *regval)
|
|
{
|
|
amd_nb_index_read(pdev, PCI_DEVFN(0, 0), 0xb8,
|
|
F15H_M60H_REPORTED_TEMP_CTRL_OFFSET, regval);
|
|
}
|
|
|
|
static void read_tempreg_nb_f17(struct pci_dev *pdev, u32 *regval)
|
|
{
|
|
amd_smn_read(amd_pci_dev_to_node_id(pdev),
|
|
F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, regval);
|
|
}
|
|
|
|
static long get_raw_temp(struct k10temp_data *data)
|
|
{
|
|
u32 regval;
|
|
long temp;
|
|
|
|
data->read_tempreg(data->pdev, ®val);
|
|
temp = (regval >> CUR_TEMP_SHIFT) * 125;
|
|
if (regval & data->temp_adjust_mask)
|
|
temp -= 49000;
|
|
return temp;
|
|
}
|
|
|
|
const char *k10temp_temp_label[] = {
|
|
"Tdie",
|
|
"Tctl",
|
|
"Tccd1",
|
|
"Tccd2",
|
|
"Tccd3",
|
|
"Tccd4",
|
|
"Tccd5",
|
|
"Tccd6",
|
|
"Tccd7",
|
|
"Tccd8",
|
|
};
|
|
|
|
const char *k10temp_in_label[] = {
|
|
"Vcore",
|
|
"Vsoc",
|
|
};
|
|
|
|
const char *k10temp_curr_label[] = {
|
|
"Icore",
|
|
"Isoc",
|
|
};
|
|
|
|
static int k10temp_read_labels(struct device *dev,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel, const char **str)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
*str = k10temp_temp_label[channel];
|
|
break;
|
|
case hwmon_in:
|
|
*str = k10temp_in_label[channel];
|
|
break;
|
|
case hwmon_curr:
|
|
*str = k10temp_curr_label[channel];
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int k10temp_read_curr(struct device *dev, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
struct k10temp_data *data = dev_get_drvdata(dev);
|
|
u32 regval;
|
|
|
|
switch (attr) {
|
|
case hwmon_curr_input:
|
|
amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
|
|
data->svi_addr[channel], ®val);
|
|
*val = DIV_ROUND_CLOSEST(data->cfactor[channel] *
|
|
(regval & 0xff),
|
|
1000);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int k10temp_read_in(struct device *dev, u32 attr, int channel, long *val)
|
|
{
|
|
struct k10temp_data *data = dev_get_drvdata(dev);
|
|
u32 regval;
|
|
|
|
switch (attr) {
|
|
case hwmon_in_input:
|
|
amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
|
|
data->svi_addr[channel], ®val);
|
|
regval = (regval >> 16) & 0xff;
|
|
*val = DIV_ROUND_CLOSEST(155000 - regval * 625, 100);
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
|
|
long *val)
|
|
{
|
|
struct k10temp_data *data = dev_get_drvdata(dev);
|
|
u32 regval;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
switch (channel) {
|
|
case 0: /* Tdie */
|
|
*val = get_raw_temp(data) - data->temp_offset;
|
|
if (*val < 0)
|
|
*val = 0;
|
|
break;
|
|
case 1: /* Tctl */
|
|
*val = get_raw_temp(data);
|
|
if (*val < 0)
|
|
*val = 0;
|
|
break;
|
|
case 2 ... 9: /* Tccd{1-8} */
|
|
amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
|
|
F17H_M70H_CCD_TEMP(channel - 2), ®val);
|
|
*val = (regval & F17H_M70H_CCD_TEMP_MASK) * 125 - 49000;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
break;
|
|
case hwmon_temp_max:
|
|
*val = 70 * 1000;
|
|
break;
|
|
case hwmon_temp_crit:
|
|
data->read_htcreg(data->pdev, ®val);
|
|
*val = ((regval >> 16) & 0x7f) * 500 + 52000;
|
|
break;
|
|
case hwmon_temp_crit_hyst:
|
|
data->read_htcreg(data->pdev, ®val);
|
|
*val = (((regval >> 16) & 0x7f)
|
|
- ((regval >> 24) & 0xf)) * 500 + 52000;
|
|
break;
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int k10temp_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
return k10temp_read_temp(dev, attr, channel, val);
|
|
case hwmon_in:
|
|
return k10temp_read_in(dev, attr, channel, val);
|
|
case hwmon_curr:
|
|
return k10temp_read_curr(dev, attr, channel, val);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static umode_t k10temp_is_visible(const void *_data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
const struct k10temp_data *data = _data;
|
|
struct pci_dev *pdev = data->pdev;
|
|
u32 reg;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
switch (channel) {
|
|
case 0: /* Tdie, or Tctl if we don't show it */
|
|
break;
|
|
case 1: /* Tctl */
|
|
if (!data->show_tdie)
|
|
return 0;
|
|
break;
|
|
case 2 ... 9: /* Tccd{1-8} */
|
|
if (!(data->show_tccd & BIT(channel - 2)))
|
|
return 0;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
break;
|
|
case hwmon_temp_max:
|
|
if (channel || data->show_tdie)
|
|
return 0;
|
|
break;
|
|
case hwmon_temp_crit:
|
|
case hwmon_temp_crit_hyst:
|
|
if (channel || !data->read_htcreg)
|
|
return 0;
|
|
|
|
pci_read_config_dword(pdev,
|
|
REG_NORTHBRIDGE_CAPABILITIES,
|
|
®);
|
|
if (!(reg & NB_CAP_HTC))
|
|
return 0;
|
|
|
|
data->read_htcreg(data->pdev, ®);
|
|
if (!(reg & HTC_ENABLE))
|
|
return 0;
|
|
break;
|
|
case hwmon_temp_label:
|
|
/* No labels if we don't show the die temperature */
|
|
if (!data->show_tdie)
|
|
return 0;
|
|
switch (channel) {
|
|
case 0: /* Tdie */
|
|
case 1: /* Tctl */
|
|
break;
|
|
case 2 ... 9: /* Tccd{1-8} */
|
|
if (!(data->show_tccd & BIT(channel - 2)))
|
|
return 0;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
break;
|
|
case hwmon_in:
|
|
case hwmon_curr:
|
|
if (!data->show_current)
|
|
return 0;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
return 0444;
|
|
}
|
|
|
|
static bool has_erratum_319(struct pci_dev *pdev)
|
|
{
|
|
u32 pkg_type, reg_dram_cfg;
|
|
|
|
if (boot_cpu_data.x86 != 0x10)
|
|
return false;
|
|
|
|
/*
|
|
* Erratum 319: The thermal sensor of Socket F/AM2+ processors
|
|
* may be unreliable.
|
|
*/
|
|
pkg_type = cpuid_ebx(0x80000001) & CPUID_PKGTYPE_MASK;
|
|
if (pkg_type == CPUID_PKGTYPE_F)
|
|
return true;
|
|
if (pkg_type != CPUID_PKGTYPE_AM2R2_AM3)
|
|
return false;
|
|
|
|
/* DDR3 memory implies socket AM3, which is good */
|
|
pci_bus_read_config_dword(pdev->bus,
|
|
PCI_DEVFN(PCI_SLOT(pdev->devfn), 2),
|
|
REG_DCT0_CONFIG_HIGH, ®_dram_cfg);
|
|
if (reg_dram_cfg & DDR3_MODE)
|
|
return false;
|
|
|
|
/*
|
|
* Unfortunately it is possible to run a socket AM3 CPU with DDR2
|
|
* memory. We blacklist all the cores which do exist in socket AM2+
|
|
* format. It still isn't perfect, as RB-C2 cores exist in both AM2+
|
|
* and AM3 formats, but that's the best we can do.
|
|
*/
|
|
return boot_cpu_data.x86_model < 4 ||
|
|
(boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_stepping <= 2);
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
static void k10temp_smn_regs_show(struct seq_file *s, struct pci_dev *pdev,
|
|
u32 addr, int count)
|
|
{
|
|
u32 reg;
|
|
int i;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
if (!(i & 3))
|
|
seq_printf(s, "0x%06x: ", addr + i * 4);
|
|
amd_smn_read(amd_pci_dev_to_node_id(pdev), addr + i * 4, ®);
|
|
seq_printf(s, "%08x ", reg);
|
|
if ((i & 3) == 3)
|
|
seq_puts(s, "\n");
|
|
}
|
|
}
|
|
|
|
static int svi_show(struct seq_file *s, void *unused)
|
|
{
|
|
struct k10temp_data *data = s->private;
|
|
|
|
k10temp_smn_regs_show(s, data->pdev, F17H_M01H_SVI, 32);
|
|
return 0;
|
|
}
|
|
DEFINE_SHOW_ATTRIBUTE(svi);
|
|
|
|
static int thm_show(struct seq_file *s, void *unused)
|
|
{
|
|
struct k10temp_data *data = s->private;
|
|
|
|
k10temp_smn_regs_show(s, data->pdev,
|
|
F17H_M01H_REPORTED_TEMP_CTRL_OFFSET, 256);
|
|
return 0;
|
|
}
|
|
DEFINE_SHOW_ATTRIBUTE(thm);
|
|
|
|
static void k10temp_debugfs_cleanup(void *ddir)
|
|
{
|
|
debugfs_remove_recursive(ddir);
|
|
}
|
|
|
|
static void k10temp_init_debugfs(struct k10temp_data *data)
|
|
{
|
|
struct dentry *debugfs;
|
|
char name[32];
|
|
|
|
/* Only show debugfs data for Family 17h/18h CPUs */
|
|
if (!data->show_tdie)
|
|
return;
|
|
|
|
scnprintf(name, sizeof(name), "k10temp-%s", pci_name(data->pdev));
|
|
|
|
debugfs = debugfs_create_dir(name, NULL);
|
|
if (debugfs) {
|
|
debugfs_create_file("svi", 0444, debugfs, data, &svi_fops);
|
|
debugfs_create_file("thm", 0444, debugfs, data, &thm_fops);
|
|
devm_add_action_or_reset(&data->pdev->dev,
|
|
k10temp_debugfs_cleanup, debugfs);
|
|
}
|
|
}
|
|
|
|
#else
|
|
|
|
static void k10temp_init_debugfs(struct k10temp_data *data)
|
|
{
|
|
}
|
|
|
|
#endif
|
|
|
|
static const struct hwmon_channel_info *k10temp_info[] = {
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_MAX |
|
|
HWMON_T_CRIT | HWMON_T_CRIT_HYST |
|
|
HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL,
|
|
HWMON_T_INPUT | HWMON_T_LABEL),
|
|
HWMON_CHANNEL_INFO(in,
|
|
HWMON_I_INPUT | HWMON_I_LABEL,
|
|
HWMON_I_INPUT | HWMON_I_LABEL),
|
|
HWMON_CHANNEL_INFO(curr,
|
|
HWMON_C_INPUT | HWMON_C_LABEL,
|
|
HWMON_C_INPUT | HWMON_C_LABEL),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops k10temp_hwmon_ops = {
|
|
.is_visible = k10temp_is_visible,
|
|
.read = k10temp_read,
|
|
.read_string = k10temp_read_labels,
|
|
};
|
|
|
|
static const struct hwmon_chip_info k10temp_chip_info = {
|
|
.ops = &k10temp_hwmon_ops,
|
|
.info = k10temp_info,
|
|
};
|
|
|
|
static void k10temp_get_ccd_support(struct pci_dev *pdev,
|
|
struct k10temp_data *data, int limit)
|
|
{
|
|
u32 regval;
|
|
int i;
|
|
|
|
for (i = 0; i < limit; i++) {
|
|
amd_smn_read(amd_pci_dev_to_node_id(pdev),
|
|
F17H_M70H_CCD_TEMP(i), ®val);
|
|
if (regval & F17H_M70H_CCD_TEMP_VALID)
|
|
data->show_tccd |= BIT(i);
|
|
}
|
|
}
|
|
|
|
static int k10temp_probe(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
int unreliable = has_erratum_319(pdev);
|
|
struct device *dev = &pdev->dev;
|
|
struct k10temp_data *data;
|
|
struct device *hwmon_dev;
|
|
int i;
|
|
|
|
if (unreliable) {
|
|
if (!force) {
|
|
dev_err(dev,
|
|
"unreliable CPU thermal sensor; monitoring disabled\n");
|
|
return -ENODEV;
|
|
}
|
|
dev_warn(dev,
|
|
"unreliable CPU thermal sensor; check erratum 319\n");
|
|
}
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->pdev = pdev;
|
|
|
|
if (boot_cpu_data.x86 == 0x15 &&
|
|
((boot_cpu_data.x86_model & 0xf0) == 0x60 ||
|
|
(boot_cpu_data.x86_model & 0xf0) == 0x70)) {
|
|
data->read_htcreg = read_htcreg_nb_f15;
|
|
data->read_tempreg = read_tempreg_nb_f15;
|
|
} else if (boot_cpu_data.x86 == 0x17 || boot_cpu_data.x86 == 0x18) {
|
|
data->temp_adjust_mask = CUR_TEMP_RANGE_SEL_MASK;
|
|
data->read_tempreg = read_tempreg_nb_f17;
|
|
data->show_tdie = true;
|
|
|
|
switch (boot_cpu_data.x86_model) {
|
|
case 0x1: /* Zen */
|
|
case 0x8: /* Zen+ */
|
|
case 0x11: /* Zen APU */
|
|
case 0x18: /* Zen+ APU */
|
|
data->show_current = !is_threadripper() && !is_epyc();
|
|
data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE0;
|
|
data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE1;
|
|
data->cfactor[0] = CFACTOR_ICORE;
|
|
data->cfactor[1] = CFACTOR_ISOC;
|
|
k10temp_get_ccd_support(pdev, data, 4);
|
|
break;
|
|
case 0x31: /* Zen2 Threadripper */
|
|
case 0x71: /* Zen2 */
|
|
data->show_current = !is_threadripper() && !is_epyc();
|
|
data->cfactor[0] = CFACTOR_ICORE;
|
|
data->cfactor[1] = CFACTOR_ISOC;
|
|
data->svi_addr[0] = F17H_M01H_SVI_TEL_PLANE1;
|
|
data->svi_addr[1] = F17H_M01H_SVI_TEL_PLANE0;
|
|
k10temp_get_ccd_support(pdev, data, 8);
|
|
break;
|
|
}
|
|
} else {
|
|
data->read_htcreg = read_htcreg_pci;
|
|
data->read_tempreg = read_tempreg_pci;
|
|
}
|
|
|
|
for (i = 0; i < ARRAY_SIZE(tctl_offset_table); i++) {
|
|
const struct tctl_offset *entry = &tctl_offset_table[i];
|
|
|
|
if (boot_cpu_data.x86 == entry->model &&
|
|
strstr(boot_cpu_data.x86_model_id, entry->id)) {
|
|
data->temp_offset = entry->offset;
|
|
break;
|
|
}
|
|
}
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, "k10temp", data,
|
|
&k10temp_chip_info,
|
|
NULL);
|
|
if (IS_ERR(hwmon_dev))
|
|
return PTR_ERR(hwmon_dev);
|
|
|
|
k10temp_init_debugfs(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pci_device_id k10temp_id_table[] = {
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M70H_NB_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_DF_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M10H_DF_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M30H_DF_F3) },
|
|
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_17H_M70H_DF_F3) },
|
|
{ PCI_VDEVICE(HYGON, PCI_DEVICE_ID_AMD_17H_DF_F3) },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
|
|
|
|
static struct pci_driver k10temp_driver = {
|
|
.name = "k10temp",
|
|
.id_table = k10temp_id_table,
|
|
.probe = k10temp_probe,
|
|
};
|
|
|
|
module_pci_driver(k10temp_driver);
|