146 lines
2.4 KiB
Plaintext
146 lines
2.4 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
/*
|
|
* Copyright 2017-2022 Toradex
|
|
*/
|
|
|
|
/ {
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
|
|
|
|
power {
|
|
label = "Wake-Up";
|
|
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
|
linux,code = <KEY_WAKEUP>;
|
|
debounce-interval = <10>;
|
|
wakeup-source;
|
|
};
|
|
};
|
|
|
|
reg_3v3: regulator-3v3 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
reg_5v0: regulator-5v0 {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
};
|
|
|
|
reg_usbh_vbus: regulator-usbh-vbus {
|
|
compatible = "regulator-fixed";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usbh_reg>;
|
|
regulator-name = "VCC_USB[1-4]";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpio = <&gpio1 2 GPIO_ACTIVE_LOW>;
|
|
vin-supply = <®_5v0>;
|
|
};
|
|
};
|
|
|
|
&adc1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ecspi1 {
|
|
status = "okay";
|
|
|
|
num-cs = <2>;
|
|
cs-gpios = <
|
|
&gpio3 26 GPIO_ACTIVE_HIGH /* SODIMM 86 LCD_DATA21 */
|
|
&gpio4 28 GPIO_ACTIVE_HIGH /* SODIMM 65 CSI_DATA07 */
|
|
>;
|
|
};
|
|
|
|
/*
|
|
* Following SODIMM Pins should not be accessed as GPIO on Aster board:
|
|
* 134 - AIN5_SCL (no connection)
|
|
* 127 - Voltage Level Translator OE# signal (IC11 and IC12)
|
|
*
|
|
* To configure GPIO to LED5, please disable FEC2 and uncomment the following:
|
|
* &iomuxc {
|
|
* pinctrl-names = "default";
|
|
* pinctrl-0 = <
|
|
* &pinctrl_gpio1
|
|
* &pinctrl_gpio2
|
|
* &pinctrl_gpio3
|
|
* &pinctrl_gpio4
|
|
* &pinctrl_gpio6 - for non-WiFi modules only
|
|
* &pinctrl_gpio7
|
|
* &pinctrl_gpio_aster
|
|
* >;
|
|
*
|
|
* pinctrl_gpio_aster: gpio-aster {
|
|
* fsl,pins = <
|
|
* MX6UL_PAD_GPIO1_IO07__GPIO1_IO07 0x1b0b0
|
|
* >;
|
|
* };
|
|
* };
|
|
*/
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
|
|
m41t0m6: rtc@68 {
|
|
compatible = "st,m41t0";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
/* PWM <A> */
|
|
&pwm4 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* PWM <B> */
|
|
&pwm5 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* PWM <C> */
|
|
&pwm6 {
|
|
status = "okay";
|
|
};
|
|
|
|
/* PWM <D> */
|
|
&pwm7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg1 {
|
|
vbus-supply = <®_usbh_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usbotg2 {
|
|
vbus-supply = <®_usbh_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&usdhc1 {
|
|
vmmc-supply = <®_3v3>;
|
|
status = "okay";
|
|
};
|