624 lines
11 KiB
Plaintext
624 lines
11 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
#include "qcom-msm8974.dtsi"
|
|
#include "qcom-pm8841.dtsi"
|
|
#include "qcom-pm8941.dtsi"
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
|
|
|
|
/ {
|
|
model = "LGE MSM 8974 HAMMERHEAD";
|
|
compatible = "lge,hammerhead", "qcom,msm8974";
|
|
|
|
aliases {
|
|
serial0 = &blsp1_uart1;
|
|
serial1 = &blsp2_uart4;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&gpio_keys_pin_a>;
|
|
|
|
volume-up {
|
|
label = "volume_up";
|
|
gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEUP>;
|
|
};
|
|
|
|
volume-down {
|
|
label = "volume_down";
|
|
gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>;
|
|
linux,input-type = <1>;
|
|
linux,code = <KEY_VOLUMEDOWN>;
|
|
};
|
|
};
|
|
|
|
vreg_wlan: wlan-regulator {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "wl-reg";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
gpio = <&tlmm 26 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_regulator_pin>;
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
charger: bq24192@6b {
|
|
compatible = "ti,bq24192";
|
|
reg = <0x6b>;
|
|
interrupts-extended = <&spmi_bus 0 0xd5 0 IRQ_TYPE_EDGE_FALLING>;
|
|
|
|
omit-battery-class;
|
|
|
|
usb_otg_vbus: usb-otg-vbus { };
|
|
};
|
|
|
|
fuelgauge: max17048@36 {
|
|
compatible = "maxim,max17048";
|
|
reg = <0x36>;
|
|
|
|
maxim,double-soc;
|
|
maxim,rcomp = /bits/ 8 <0x4d>;
|
|
|
|
interrupt-parent = <&tlmm>;
|
|
interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&fuelgauge_pin>;
|
|
|
|
maxim,alert-low-soc-level = <2>;
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c2 {
|
|
status = "okay";
|
|
clock-frequency = <355000>;
|
|
|
|
synaptics@70 {
|
|
compatible = "syna,rmi4-i2c";
|
|
reg = <0x70>;
|
|
|
|
interrupts-extended = <&tlmm 5 IRQ_TYPE_EDGE_FALLING>;
|
|
vdd-supply = <&pm8941_l22>;
|
|
vio-supply = <&pm8941_lvs3>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&touch_pin>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
rmi4-f01@1 {
|
|
reg = <0x1>;
|
|
syna,nosleep-mode = <1>;
|
|
};
|
|
|
|
rmi4-f12@12 {
|
|
reg = <0x12>;
|
|
syna,sensor-type = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_i2c3 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
avago_apds993@39 {
|
|
compatible = "avago,apds9930";
|
|
reg = <0x39>;
|
|
interrupts-extended = <&tlmm 61 IRQ_TYPE_EDGE_FALLING>;
|
|
vdd-supply = <&pm8941_l17>;
|
|
vddio-supply = <&pm8941_lvs1>;
|
|
led-max-microamp = <100000>;
|
|
amstaos,proximity-diodes = <0>;
|
|
};
|
|
};
|
|
|
|
&blsp2_i2c5 {
|
|
status = "okay";
|
|
clock-frequency = <355000>;
|
|
|
|
led-controller@38 {
|
|
compatible = "ti,lm3630a";
|
|
status = "okay";
|
|
reg = <0x38>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
led@0 {
|
|
reg = <0>;
|
|
led-sources = <0 1>;
|
|
label = "lcd-backlight";
|
|
default-brightness = <200>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp2_i2c6 {
|
|
status = "okay";
|
|
clock-frequency = <100000>;
|
|
|
|
mpu6515@68 {
|
|
compatible = "invensense,mpu6515";
|
|
reg = <0x68>;
|
|
interrupts-extended = <&tlmm 73 IRQ_TYPE_EDGE_FALLING>;
|
|
vddio-supply = <&pm8941_lvs1>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mpu6515_pin>;
|
|
|
|
mount-matrix = "0", "-1", "0",
|
|
"-1", "0", "0",
|
|
"0", "0", "1";
|
|
|
|
i2c-gate {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
ak8963@f {
|
|
compatible = "asahi-kasei,ak8963";
|
|
reg = <0x0f>;
|
|
gpios = <&tlmm 67 0>;
|
|
vid-supply = <&pm8941_lvs1>;
|
|
vdd-supply = <&pm8941_l17>;
|
|
};
|
|
|
|
bmp280@76 {
|
|
compatible = "bosch,bmp280";
|
|
reg = <0x76>;
|
|
vdda-supply = <&pm8941_lvs1>;
|
|
vddd-supply = <&pm8941_l17>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&blsp1_uart1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&blsp2_uart4 {
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "brcm,bcm43438-bt";
|
|
max-speed = <3000000>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&bt_pin>;
|
|
|
|
host-wakeup-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
|
|
device-wakeup-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>;
|
|
shutdown-gpios = <&tlmm 41 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
|
|
&dsi0 {
|
|
status = "okay";
|
|
|
|
vdda-supply = <&pm8941_l2>;
|
|
vdd-supply = <&pm8941_lvs3>;
|
|
vddio-supply = <&pm8941_l12>;
|
|
|
|
panel: panel@0 {
|
|
reg = <0>;
|
|
compatible = "lg,acx467akm-7";
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&panel_pin>;
|
|
|
|
port {
|
|
panel_in: endpoint {
|
|
remote-endpoint = <&dsi0_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&dsi0_out {
|
|
remote-endpoint = <&panel_in>;
|
|
data-lanes = <0 1 2 3>;
|
|
};
|
|
|
|
&dsi0_phy {
|
|
status = "okay";
|
|
|
|
vddio-supply = <&pm8941_l12>;
|
|
};
|
|
|
|
&mdss {
|
|
status = "okay";
|
|
};
|
|
|
|
&otg {
|
|
status = "okay";
|
|
|
|
phys = <&usb_hs1_phy>;
|
|
phy-select = <&tcsr 0xb000 0>;
|
|
|
|
extcon = <&charger>, <&usb_id>;
|
|
vbus-supply = <&usb_otg_vbus>;
|
|
|
|
hnp-disable;
|
|
srp-disable;
|
|
adp-disable;
|
|
|
|
ulpi {
|
|
phy@a {
|
|
status = "okay";
|
|
|
|
v1p8-supply = <&pm8941_l6>;
|
|
v3p3-supply = <&pm8941_l24>;
|
|
|
|
qcom,init-seq = /bits/ 8 <0x1 0x64>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pm8941_gpios {
|
|
gpio_keys_pin_a: gpio-keys-active {
|
|
pins = "gpio2", "gpio3";
|
|
function = "normal";
|
|
|
|
bias-pull-up;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
fuelgauge_pin: fuelgauge-int {
|
|
pins = "gpio9";
|
|
function = "normal";
|
|
|
|
bias-disable;
|
|
input-enable;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
wlan_sleep_clk_pin: wl-sleep-clk {
|
|
pins = "gpio16";
|
|
function = "func2";
|
|
|
|
output-high;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
wlan_regulator_pin: wl-reg-active {
|
|
pins = "gpio17";
|
|
function = "normal";
|
|
|
|
bias-disable;
|
|
power-source = <PM8941_GPIO_S3>;
|
|
};
|
|
|
|
otg {
|
|
gpio-hog;
|
|
gpios = <35 GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "otg-gpio";
|
|
};
|
|
};
|
|
|
|
&rpm_requests {
|
|
pm8841-regulators {
|
|
compatible = "qcom,rpm-pm8841-regulators";
|
|
|
|
pm8841_s1: s1 {
|
|
regulator-min-microvolt = <675000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
pm8841_s2: s2 {
|
|
regulator-min-microvolt = <500000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
pm8841_s3: s3 {
|
|
regulator-min-microvolt = <1050000>;
|
|
regulator-max-microvolt = <1050000>;
|
|
};
|
|
|
|
pm8841_s4: s4 {
|
|
regulator-min-microvolt = <815000>;
|
|
regulator-max-microvolt = <900000>;
|
|
};
|
|
};
|
|
|
|
pm8941-regulators {
|
|
compatible = "qcom,rpm-pm8941-regulators";
|
|
|
|
vdd_l1_l3-supply = <&pm8941_s1>;
|
|
vdd_l2_lvs1_2_3-supply = <&pm8941_s3>;
|
|
vdd_l4_l11-supply = <&pm8941_s1>;
|
|
vdd_l5_l7-supply = <&pm8941_s2>;
|
|
vdd_l6_l12_l14_l15-supply = <&pm8941_s2>;
|
|
vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>;
|
|
vdd_l9_l10_l17_l22-supply = <&vreg_boost>;
|
|
vdd_l13_l20_l23_l24-supply = <&vreg_boost>;
|
|
vdd_l21-supply = <&vreg_boost>;
|
|
|
|
pm8941_s1: s1 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_s2: s2 {
|
|
regulator-min-microvolt = <2150000>;
|
|
regulator-max-microvolt = <2150000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_s3: s3 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l1: l1 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l2: l2 {
|
|
regulator-min-microvolt = <1200000>;
|
|
regulator-max-microvolt = <1200000>;
|
|
};
|
|
|
|
pm8941_l3: l3 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
pm8941_l4: l4 {
|
|
regulator-min-microvolt = <1225000>;
|
|
regulator-max-microvolt = <1225000>;
|
|
};
|
|
|
|
pm8941_l5: l5 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pm8941_l6: l6 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l7: l7 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l8: l8 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pm8941_l9: l9 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
pm8941_l10: l10 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
};
|
|
|
|
pm8941_l11: l11 {
|
|
regulator-min-microvolt = <1300000>;
|
|
regulator-max-microvolt = <1300000>;
|
|
};
|
|
|
|
pm8941_l12: l12 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l13: l13 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l14: l14 {
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
};
|
|
|
|
pm8941_l15: l15 {
|
|
regulator-min-microvolt = <2050000>;
|
|
regulator-max-microvolt = <2050000>;
|
|
};
|
|
|
|
pm8941_l16: l16 {
|
|
regulator-min-microvolt = <2700000>;
|
|
regulator-max-microvolt = <2700000>;
|
|
};
|
|
|
|
pm8941_l17: l17 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
pm8941_l18: l18 {
|
|
regulator-min-microvolt = <2850000>;
|
|
regulator-max-microvolt = <2850000>;
|
|
};
|
|
|
|
pm8941_l19: l19 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
pm8941_l20: l20 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-system-load = <200000>;
|
|
regulator-allow-set-load;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l21: l21 {
|
|
regulator-min-microvolt = <2950000>;
|
|
regulator-max-microvolt = <2950000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_l22: l22 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
};
|
|
|
|
pm8941_l23: l23 {
|
|
regulator-min-microvolt = <3000000>;
|
|
regulator-max-microvolt = <3000000>;
|
|
};
|
|
|
|
pm8941_l24: l24 {
|
|
regulator-min-microvolt = <3075000>;
|
|
regulator-max-microvolt = <3075000>;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
pm8941_lvs1: lvs1 {};
|
|
pm8941_lvs3: lvs3 {};
|
|
};
|
|
};
|
|
|
|
&sdhc_1 {
|
|
status = "okay";
|
|
|
|
vmmc-supply = <&pm8941_l20>;
|
|
vqmmc-supply = <&pm8941_s3>;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc1_on>;
|
|
pinctrl-1 = <&sdc1_off>;
|
|
};
|
|
|
|
&sdhc_2 {
|
|
status = "okay";
|
|
|
|
max-frequency = <100000000>;
|
|
vmmc-supply = <&vreg_wlan>;
|
|
vqmmc-supply = <&pm8941_s3>;
|
|
non-removable;
|
|
|
|
pinctrl-names = "default", "sleep";
|
|
pinctrl-0 = <&sdc2_on>;
|
|
pinctrl-1 = <&sdc2_off>;
|
|
|
|
bcrmf@1 {
|
|
compatible = "brcm,bcm4339-fmac", "brcm,bcm4329-fmac";
|
|
reg = <1>;
|
|
|
|
brcm,drive-strength = <10>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wlan_sleep_clk_pin>;
|
|
};
|
|
};
|
|
|
|
&tlmm {
|
|
sdc1_on: sdc1-on {
|
|
clk {
|
|
pins = "sdc1_clk";
|
|
drive-strength = <16>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc1_cmd", "sdc1_data";
|
|
drive-strength = <10>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
sdc2_on: sdc2-on {
|
|
clk {
|
|
pins = "sdc2_clk";
|
|
drive-strength = <6>;
|
|
bias-disable;
|
|
};
|
|
|
|
cmd-data {
|
|
pins = "sdc2_cmd", "sdc2_data";
|
|
drive-strength = <6>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
mpu6515_pin: mpu6515 {
|
|
pins = "gpio73";
|
|
function = "gpio";
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
touch_pin: touch {
|
|
int {
|
|
pins = "gpio5";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
input-enable;
|
|
};
|
|
|
|
reset {
|
|
pins = "gpio8";
|
|
function = "gpio";
|
|
|
|
drive-strength = <2>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
panel_pin: panel {
|
|
pins = "gpio12";
|
|
function = "mdp_vsync";
|
|
drive-strength = <2>;
|
|
bias-disable;
|
|
};
|
|
|
|
bt_pin: bt {
|
|
hostwake {
|
|
pins = "gpio42";
|
|
function = "gpio";
|
|
};
|
|
|
|
devwake {
|
|
pins = "gpio62";
|
|
function = "gpio";
|
|
};
|
|
|
|
shutdown {
|
|
pins = "gpio41";
|
|
function = "gpio";
|
|
};
|
|
};
|
|
};
|