435 lines
12 KiB
Plaintext
435 lines
12 KiB
Plaintext
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright 2021 NXP
|
|
*/
|
|
|
|
#include <dt-bindings/clock/imx8ulp-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/power/imx8ulp-power.h>
|
|
|
|
#include "imx8ulp-pinfunc.h"
|
|
|
|
/ {
|
|
interrupt-parent = <&gic>;
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
|
|
aliases {
|
|
gpio0 = &gpiod;
|
|
gpio1 = &gpioe;
|
|
gpio2 = &gpiof;
|
|
mmc0 = &usdhc0;
|
|
mmc1 = &usdhc1;
|
|
mmc2 = &usdhc2;
|
|
serial0 = &lpuart4;
|
|
serial1 = &lpuart5;
|
|
serial2 = &lpuart6;
|
|
serial3 = &lpuart7;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
|
|
A35_0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a35";
|
|
reg = <0x0 0x0>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A35_L2>;
|
|
};
|
|
|
|
A35_1: cpu@1 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a35";
|
|
reg = <0x0 0x1>;
|
|
enable-method = "psci";
|
|
next-level-cache = <&A35_L2>;
|
|
};
|
|
|
|
A35_L2: l2-cache0 {
|
|
compatible = "cache";
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@2d400000 {
|
|
compatible = "arm,gic-v3";
|
|
reg = <0x0 0x2d400000 0 0x10000>, /* GIC Dist */
|
|
<0x0 0x2d440000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
psci {
|
|
compatible = "arm,psci-1.0";
|
|
method = "smc";
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv8-timer";
|
|
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* Physical Secure */
|
|
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* Physical Non-Secure */
|
|
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* Virtual */
|
|
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* Hypervisor */
|
|
};
|
|
|
|
frosc: clock-frosc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <192000000>;
|
|
clock-output-names = "frosc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
lposc: clock-lposc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <1000000>;
|
|
clock-output-names = "lposc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
rosc: clock-rosc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "rosc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sosc: clock-sosc {
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <24000000>;
|
|
clock-output-names = "sosc";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
sram@2201f000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x0 0x2201f000 0x0 0x1000>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 0x0 0x2201f000 0x1000>;
|
|
|
|
scmi_buf: scmi-buf@0 {
|
|
compatible = "arm,scmi-shmem";
|
|
reg = <0x0 0x400>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scmi {
|
|
compatible = "arm,scmi-smc";
|
|
arm,smc-id = <0xc20000fe>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
shmem = <&scmi_buf>;
|
|
|
|
scmi_devpd: protocol@11 {
|
|
reg = <0x11>;
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
scmi_sensor: protocol@15 {
|
|
reg = <0x15>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
soc@0 {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x0 0x0 0x40000000>;
|
|
|
|
per_bridge3: bus@29000000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x29000000 0x800000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
wdog3: watchdog@292a0000 {
|
|
compatible = "fsl,imx8ulp-wdt", "fsl,imx7ulp-wdt";
|
|
reg = <0x292a0000 0x10000>;
|
|
interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
|
|
assigned-clocks = <&pcc3 IMX8ULP_CLK_WDOG3>;
|
|
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_SOSC_DIV2>;
|
|
timeout-sec = <40>;
|
|
};
|
|
|
|
cgc1: clock-controller@292c0000 {
|
|
compatible = "fsl,imx8ulp-cgc1";
|
|
reg = <0x292c0000 0x10000>;
|
|
clocks = <&rosc>, <&sosc>, <&frosc>, <&lposc>;
|
|
clock-names = "rosc", "sosc", "frosc", "lposc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pcc3: clock-controller@292d0000 {
|
|
compatible = "fsl,imx8ulp-pcc3";
|
|
reg = <0x292d0000 0x10000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
tpm5: tpm@29340000 {
|
|
compatible = "fsl,imx8ulp-tpm", "fsl,imx7ulp-tpm";
|
|
reg = <0x29340000 0x1000>;
|
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_TPM5>,
|
|
<&pcc3 IMX8ULP_CLK_TPM5>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpi2c4: i2c@29370000 {
|
|
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
|
|
reg = <0x29370000 0x10000>;
|
|
interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>,
|
|
<&pcc3 IMX8ULP_CLK_LPI2C4>;
|
|
clock-names = "per", "ipg";
|
|
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C4>;
|
|
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpi2c5: i2c@29380000 {
|
|
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
|
|
reg = <0x29380000 0x10000>;
|
|
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>,
|
|
<&pcc3 IMX8ULP_CLK_LPI2C5>;
|
|
clock-names = "per", "ipg";
|
|
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPI2C5>;
|
|
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart4: serial@29390000 {
|
|
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
|
|
reg = <0x29390000 0x1000>;
|
|
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_LPUART4>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart5: serial@293a0000 {
|
|
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
|
|
reg = <0x293a0000 0x1000>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_LPUART5>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpspi4: spi@293b0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
|
|
reg = <0x293b0000 0x10000>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>,
|
|
<&pcc3 IMX8ULP_CLK_LPSPI4>;
|
|
clock-names = "per", "ipg";
|
|
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI4>;
|
|
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
|
|
assigned-clock-rates = <16000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpspi5: spi@293c0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx8ulp-spi", "fsl,imx7ulp-spi";
|
|
reg = <0x293c0000 0x10000>;
|
|
interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>,
|
|
<&pcc3 IMX8ULP_CLK_LPSPI5>;
|
|
clock-names = "per", "ipg";
|
|
assigned-clocks = <&pcc3 IMX8ULP_CLK_LPSPI5>;
|
|
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
|
|
assigned-clock-rates = <16000000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
per_bridge4: bus@29800000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x29800000 0x800000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
pcc4: clock-controller@29800000 {
|
|
compatible = "fsl,imx8ulp-pcc4";
|
|
reg = <0x29800000 0x10000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
lpi2c6: i2c@29840000 {
|
|
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
|
|
reg = <0x29840000 0x10000>;
|
|
interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>,
|
|
<&pcc4 IMX8ULP_CLK_LPI2C6>;
|
|
clock-names = "per", "ipg";
|
|
assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C6>;
|
|
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpi2c7: i2c@29850000 {
|
|
compatible = "fsl,imx8ulp-lpi2c", "fsl,imx7ulp-lpi2c";
|
|
reg = <0x29850000 0x10000>;
|
|
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>,
|
|
<&pcc4 IMX8ULP_CLK_LPI2C7>;
|
|
clock-names = "per", "ipg";
|
|
assigned-clocks = <&pcc4 IMX8ULP_CLK_LPI2C7>;
|
|
assigned-clock-parents = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>;
|
|
assigned-clock-rates = <48000000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart6: serial@29860000 {
|
|
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
|
|
reg = <0x29860000 0x1000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc4 IMX8ULP_CLK_LPUART6>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
lpuart7: serial@29870000 {
|
|
compatible = "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
|
|
reg = <0x29870000 0x1000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&pcc4 IMX8ULP_CLK_LPUART7>;
|
|
clock-names = "ipg";
|
|
status = "disabled";
|
|
};
|
|
|
|
iomuxc1: pinctrl@298c0000 {
|
|
compatible = "fsl,imx8ulp-iomuxc1";
|
|
reg = <0x298c0000 0x10000>;
|
|
};
|
|
|
|
usdhc0: mmc@298d0000 {
|
|
compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
|
|
reg = <0x298d0000 0x10000>;
|
|
interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
|
|
<&cgc1 IMX8ULP_CLK_XBAR_AD_DIVPLAT>,
|
|
<&pcc4 IMX8ULP_CLK_USDHC0>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC0>;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc1: mmc@298e0000 {
|
|
compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
|
|
reg = <0x298e0000 0x10000>;
|
|
interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
|
|
<&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
|
|
<&pcc4 IMX8ULP_CLK_USDHC1>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC1>;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usdhc2: mmc@298f0000 {
|
|
compatible = "fsl,imx8ulp-usdhc", "fsl,imx8mm-usdhc";
|
|
reg = <0x298f0000 0x10000>;
|
|
interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&cgc1 IMX8ULP_CLK_XBAR_DIVBUS>,
|
|
<&cgc1 IMX8ULP_CLK_NIC_PER_DIVPLAT>,
|
|
<&pcc4 IMX8ULP_CLK_USDHC2>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
power-domains = <&scmi_devpd IMX8ULP_PD_USDHC2_USB1>;
|
|
fsl,tuning-start-tap = <20>;
|
|
fsl,tuning-step= <2>;
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
gpioe: gpio@2d000000 {
|
|
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
|
|
reg = <0x2d000080 0x1000>, <0x2d000040 0x40>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pcc4 IMX8ULP_CLK_RGPIOE>,
|
|
<&pcc4 IMX8ULP_CLK_PCTLE>;
|
|
clock-names = "gpio", "port";
|
|
gpio-ranges = <&iomuxc1 0 32 24>;
|
|
};
|
|
|
|
gpiof: gpio@2d010000 {
|
|
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
|
|
reg = <0x2d010080 0x1000>, <0x2d010040 0x40>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pcc4 IMX8ULP_CLK_RGPIOF>,
|
|
<&pcc4 IMX8ULP_CLK_PCTLF>;
|
|
clock-names = "gpio", "port";
|
|
gpio-ranges = <&iomuxc1 0 64 32>;
|
|
};
|
|
|
|
per_bridge5: bus@2d800000 {
|
|
compatible = "simple-bus";
|
|
reg = <0x2d800000 0x800000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
cgc2: clock-controller@2da60000 {
|
|
compatible = "fsl,imx8ulp-cgc2";
|
|
reg = <0x2da60000 0x10000>;
|
|
clocks = <&sosc>, <&frosc>;
|
|
clock-names = "sosc", "frosc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pcc5: clock-controller@2da70000 {
|
|
compatible = "fsl,imx8ulp-pcc5";
|
|
reg = <0x2da70000 0x10000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
gpiod: gpio@2e200000 {
|
|
compatible = "fsl,imx8ulp-gpio", "fsl,imx7ulp-gpio";
|
|
reg = <0x2e200080 0x1000>, <0x2e200040 0x40>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
clocks = <&pcc5 IMX8ULP_CLK_RGPIOD>,
|
|
<&pcc5 IMX8ULP_CLK_RGPIOD>;
|
|
clock-names = "gpio", "port";
|
|
gpio-ranges = <&iomuxc1 0 0 24>;
|
|
};
|
|
};
|
|
};
|