linux-stable/include/linux/usb
Martin Blumenstingl 178a0bce05 usb: core: hcd: integrate the PHY wrapper into the HCD core
This integrates the PHY wrapper into the core hcd infrastructure.
Multiple PHYs which are part of the HCD's device tree node are now
managed (= powered on/off when needed), by the new usb_phy_roothub code.

Suspend and resume is also supported, however not for
runtime/auto-suspend (which is triggered for example when no devices are
connected to the USB bus). This is needed on some SoCs (for example
Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend
then devices which are plugged in afterwards are not seen by the host.

One example where this is required is the Amlogic GXL and GXM SoCs:
They are using a dwc3 USB controller with up to three ports enabled on
the internal roothub. Each port has it's own PHY which must be enabled
(if one of the PHYs is left disabled then none of the USB ports works at
all).
The new logic works on the Amlogic GXL and GXM SoCs because the dwc3
driver internally creates a xhci-hcd which then registers a HCD which
then triggers our new PHY wrapper.

USB controller drivers can opt out of this by setting
"skip_phy_initialization" in struct usb_hcd to true. This is identical
to how it works for a single USB PHY, so the "multiple PHY" handling is
disabled for drivers that opted out of the management logic of a single
PHY.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Tested-by: Yixun Lan <yixun.lan@amlogic.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.con>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-09 09:43:53 -08:00
..
association.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
atmel_usba_udc.h
audio-v2.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
audio.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
c67x00.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
cdc-wdm.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
cdc.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
cdc_ncm.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
ch9.h
chipidea.h
composite.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
ehci-dbgp.h
ehci_def.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
ehci_pdriver.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
ezusb.h
functionfs.h
g_hid.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
gadget.h usb: gadget: add isoch_delay member 2017-12-11 12:36:48 +02:00
gadget_configfs.h
gpio_vbus.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
hcd.h usb: core: hcd: integrate the PHY wrapper into the HCD core 2018-03-09 09:43:53 -08:00
input.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
iowarrior.h
irda.h
isp116x.h
isp1301.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
isp1362.h
isp1760.h
m66592.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
musb-ux500.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
musb.h
net2280.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
of.h USB: of: clean up device-node helper 2017-11-28 15:12:38 +01:00
ohci_pdriver.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
otg-fsm.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
otg.h
pd.h typec: tcpm: Add PD Rev 3.0 definitions to PD header 2018-03-09 09:21:40 -08:00
pd_ado.h typec: tcpm: Add ADO header for Alert message handling 2018-03-09 09:21:40 -08:00
pd_bdo.h
pd_ext_sdb.h typec: tcpm: Add SDB header for Status message handling 2018-03-09 09:21:40 -08:00
pd_vdo.h usb: pd: fix the offset for SVID specific commands 2017-12-19 11:47:23 +01:00
phy.h
phy_companion.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
quirks.h USB/PHY patches for 4.15-rc1 2017-11-13 21:14:07 -08:00
r8a66597.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
renesas_usbhs.h usb: renesas_usbhs: Add support for RZ/A1 2018-01-09 16:18:50 +01:00
rndis_host.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
samsung_usb_phy.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
serial.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
sl811.h
storage.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
tcpm.h typec: tcpm: Validate source and sink caps 2017-12-07 16:03:15 +01:00
tegra_usb_phy.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
tilegx.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
typec.h
uas.h
ulpi.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
usb338x.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
usb_phy_generic.h
usbnet.h usbnet: fix alignment for frames with no ethernet header 2017-12-07 14:32:30 -05:00
wusb-wa.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
wusb.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00
xhci-dbgp.h USB: add SPDX identifiers to all remaining files in drivers/usb/ 2017-11-04 11:48:02 +01:00