linux-stable/drivers/net/mipsnet.c
Harvey Harrison b39d66a81f drivers/net: replace __FUNCTION__ with __func__
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-09-24 18:59:00 -04:00

335 lines
7.9 KiB
C

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/platform_device.h>
#include <asm/mips-boards/simint.h>
#define MIPSNET_VERSION "2007-11-17"
/*
* Net status/control block as seen by sw in the core.
*/
struct mipsnet_regs {
/*
* Device info for probing, reads as MIPSNET%d where %d is some
* form of version.
*/
u64 devId; /*0x00 */
/*
* read only busy flag.
* Set and cleared by the Net Device to indicate that an rx or a tx
* is in progress.
*/
u32 busy; /*0x08 */
/*
* Set by the Net Device.
* The device will set it once data has been received.
* The value is the number of bytes that should be read from
* rxDataBuffer. The value will decrease till 0 until all the data
* from rxDataBuffer has been read.
*/
u32 rxDataCount; /*0x0c */
#define MIPSNET_MAX_RXTX_DATACOUNT (1 << 16)
/*
* Settable from the MIPS core, cleared by the Net Device.
* The core should set the number of bytes it wants to send,
* then it should write those bytes of data to txDataBuffer.
* The device will clear txDataCount has been processed (not
* necessarily sent).
*/
u32 txDataCount; /*0x10 */
/*
* Interrupt control
*
* Used to clear the interrupted generated by this dev.
* Write a 1 to clear the interrupt. (except bit31).
*
* Bit0 is set if it was a tx-done interrupt.
* Bit1 is set when new rx-data is available.
* Until this bit is cleared there will be no other RXs.
*
* Bit31 is used for testing, it clears after a read.
* Writing 1 to this bit will cause an interrupt to be generated.
* To clear the test interrupt, write 0 to this register.
*/
u32 interruptControl; /*0x14 */
#define MIPSNET_INTCTL_TXDONE (1u << 0)
#define MIPSNET_INTCTL_RXDONE (1u << 1)
#define MIPSNET_INTCTL_TESTBIT (1u << 31)
/*
* Readonly core-specific interrupt info for the device to signal
* the core. The meaning of the contents of this field might change.
*/
/* XXX: the whole memIntf interrupt scheme is messy: the device
* should have no control what so ever of what VPE/register set is
* being used.
* The MemIntf should only expose interrupt lines, and something in
* the config should be responsible for the line<->core/vpe bindings.
*/
u32 interruptInfo; /*0x18 */
/*
* This is where the received data is read out.
* There is more data to read until rxDataReady is 0.
* Only 1 byte at this regs offset is used.
*/
u32 rxDataBuffer; /*0x1c */
/*
* This is where the data to transmit is written.
* Data should be written for the amount specified in the
* txDataCount register.
* Only 1 byte at this regs offset is used.
*/
u32 txDataBuffer; /*0x20 */
};
#define regaddr(dev, field) \
(dev->base_addr + offsetof(struct mipsnet_regs, field))
static char mipsnet_string[] = "mipsnet";
/*
* Copy data from the MIPSNET rx data port
*/
static int ioiocpy_frommipsnet(struct net_device *dev, unsigned char *kdata,
int len)
{
for (; len > 0; len--, kdata++)
*kdata = inb(regaddr(dev, rxDataBuffer));
return inl(regaddr(dev, rxDataCount));
}
static inline void mipsnet_put_todevice(struct net_device *dev,
struct sk_buff *skb)
{
int count_to_go = skb->len;
char *buf_ptr = skb->data;
outl(skb->len, regaddr(dev, txDataCount));
for (; count_to_go; buf_ptr++, count_to_go--)
outb(*buf_ptr, regaddr(dev, txDataBuffer));
dev->stats.tx_packets++;
dev->stats.tx_bytes += skb->len;
dev_kfree_skb(skb);
}
static int mipsnet_xmit(struct sk_buff *skb, struct net_device *dev)
{
/*
* Only one packet at a time. Once TXDONE interrupt is serviced, the
* queue will be restarted.
*/
netif_stop_queue(dev);
mipsnet_put_todevice(dev, skb);
return 0;
}
static inline ssize_t mipsnet_get_fromdev(struct net_device *dev, size_t len)
{
struct sk_buff *skb;
if (!len)
return len;
skb = dev_alloc_skb(len + NET_IP_ALIGN);
if (!skb) {
dev->stats.rx_dropped++;
return -ENOMEM;
}
skb_reserve(skb, NET_IP_ALIGN);
if (ioiocpy_frommipsnet(dev, skb_put(skb, len), len))
return -EFAULT;
skb->protocol = eth_type_trans(skb, dev);
skb->ip_summed = CHECKSUM_UNNECESSARY;
netif_rx(skb);
dev->stats.rx_packets++;
dev->stats.rx_bytes += len;
return len;
}
static irqreturn_t mipsnet_interrupt(int irq, void *dev_id)
{
struct net_device *dev = dev_id;
u32 int_flags;
irqreturn_t ret = IRQ_NONE;
if (irq != dev->irq)
goto out_badirq;
/* TESTBIT is cleared on read. */
int_flags = inl(regaddr(dev, interruptControl));
if (int_flags & MIPSNET_INTCTL_TESTBIT) {
/* TESTBIT takes effect after a write with 0. */
outl(0, regaddr(dev, interruptControl));
ret = IRQ_HANDLED;
} else if (int_flags & MIPSNET_INTCTL_TXDONE) {
/* Only one packet at a time, we are done. */
dev->stats.tx_packets++;
netif_wake_queue(dev);
outl(MIPSNET_INTCTL_TXDONE,
regaddr(dev, interruptControl));
ret = IRQ_HANDLED;
} else if (int_flags & MIPSNET_INTCTL_RXDONE) {
mipsnet_get_fromdev(dev, inl(regaddr(dev, rxDataCount)));
outl(MIPSNET_INTCTL_RXDONE, regaddr(dev, interruptControl));
ret = IRQ_HANDLED;
}
return ret;
out_badirq:
printk(KERN_INFO "%s: %s(): irq %d for unknown device\n",
dev->name, __func__, irq);
return ret;
}
static int mipsnet_open(struct net_device *dev)
{
int err;
err = request_irq(dev->irq, &mipsnet_interrupt,
IRQF_SHARED, dev->name, (void *) dev);
if (err) {
release_region(dev->base_addr, sizeof(struct mipsnet_regs));
return err;
}
netif_start_queue(dev);
/* test interrupt handler */
outl(MIPSNET_INTCTL_TESTBIT, regaddr(dev, interruptControl));
return 0;
}
static int mipsnet_close(struct net_device *dev)
{
netif_stop_queue(dev);
free_irq(dev->irq, dev);
return 0;
}
static void mipsnet_set_mclist(struct net_device *dev)
{
}
static int __init mipsnet_probe(struct device *dev)
{
struct net_device *netdev;
int err;
netdev = alloc_etherdev(0);
if (!netdev) {
err = -ENOMEM;
goto out;
}
dev_set_drvdata(dev, netdev);
netdev->open = mipsnet_open;
netdev->stop = mipsnet_close;
netdev->hard_start_xmit = mipsnet_xmit;
netdev->set_multicast_list = mipsnet_set_mclist;
/*
* TODO: probe for these or load them from PARAM
*/
netdev->base_addr = 0x4200;
netdev->irq = MIPS_CPU_IRQ_BASE + MIPSCPU_INT_MB0 +
inl(regaddr(netdev, interruptInfo));
/* Get the io region now, get irq on open() */
if (!request_region(netdev->base_addr, sizeof(struct mipsnet_regs),
"mipsnet")) {
err = -EBUSY;
goto out_free_netdev;
}
/*
* Lacking any better mechanism to allocate a MAC address we use a
* random one ...
*/
random_ether_addr(netdev->dev_addr);
err = register_netdev(netdev);
if (err) {
printk(KERN_ERR "MIPSNet: failed to register netdev.\n");
goto out_free_region;
}
return 0;
out_free_region:
release_region(netdev->base_addr, sizeof(struct mipsnet_regs));
out_free_netdev:
free_netdev(netdev);
out:
return err;
}
static int __devexit mipsnet_device_remove(struct device *device)
{
struct net_device *dev = dev_get_drvdata(device);
unregister_netdev(dev);
release_region(dev->base_addr, sizeof(struct mipsnet_regs));
free_netdev(dev);
dev_set_drvdata(device, NULL);
return 0;
}
static struct device_driver mipsnet_driver = {
.name = mipsnet_string,
.bus = &platform_bus_type,
.probe = mipsnet_probe,
.remove = __devexit_p(mipsnet_device_remove),
};
static int __init mipsnet_init_module(void)
{
int err;
printk(KERN_INFO "MIPSNet Ethernet driver. Version: %s. "
"(c)2005 MIPS Technologies, Inc.\n", MIPSNET_VERSION);
err = driver_register(&mipsnet_driver);
if (err)
printk(KERN_ERR "Driver registration failed\n");
return err;
}
static void __exit mipsnet_exit_module(void)
{
driver_unregister(&mipsnet_driver);
}
module_init(mipsnet_init_module);
module_exit(mipsnet_exit_module);