mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 08:19:28 +00:00
![Wang Chen](/assets/img/avatar_default.png)
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. This patch is a safe convert for netdev->priv to netdev_priv(netdev). Since all of the netdev->priv is only for read. But it is too big to be sent in one mail. I split it to 4 parts and make every part smaller than 100,000 bytes, which is max size allowed by vger. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
925 lines
29 KiB
C
925 lines
29 KiB
C
/* znet.c: An Zenith Z-Note ethernet driver for linux. */
|
|
|
|
/*
|
|
Written by Donald Becker.
|
|
|
|
The author may be reached as becker@scyld.com.
|
|
This driver is based on the Linux skeleton driver. The copyright of the
|
|
skeleton driver is held by the United States Government, as represented
|
|
by DIRNSA, and it is released under the GPL.
|
|
|
|
Thanks to Mike Hollick for alpha testing and suggestions.
|
|
|
|
References:
|
|
The Crynwr packet driver.
|
|
|
|
"82593 CSMA/CD Core LAN Controller" Intel datasheet, 1992
|
|
Intel Microcommunications Databook, Vol. 1, 1990.
|
|
As usual with Intel, the documentation is incomplete and inaccurate.
|
|
I had to read the Crynwr packet driver to figure out how to actually
|
|
use the i82593, and guess at what register bits matched the loosely
|
|
related i82586.
|
|
|
|
Theory of Operation
|
|
|
|
The i82593 used in the Zenith Z-Note series operates using two(!) slave
|
|
DMA channels, one interrupt, and one 8-bit I/O port.
|
|
|
|
While there several ways to configure '593 DMA system, I chose the one
|
|
that seemed commensurate with the highest system performance in the face
|
|
of moderate interrupt latency: Both DMA channels are configured as
|
|
recirculating ring buffers, with one channel (#0) dedicated to Rx and
|
|
the other channel (#1) to Tx and configuration. (Note that this is
|
|
different than the Crynwr driver, where the Tx DMA channel is initialized
|
|
before each operation. That approach simplifies operation and Tx error
|
|
recovery, but requires additional I/O in normal operation and precludes
|
|
transmit buffer chaining.)
|
|
|
|
Both rings are set to 8192 bytes using {TX,RX}_RING_SIZE. This provides
|
|
a reasonable ring size for Rx, while simplifying DMA buffer allocation --
|
|
DMA buffers must not cross a 128K boundary. (In truth the size selection
|
|
was influenced by my lack of '593 documentation. I thus was constrained
|
|
to use the Crynwr '593 initialization table, which sets the Rx ring size
|
|
to 8K.)
|
|
|
|
Despite my usual low opinion about Intel-designed parts, I must admit
|
|
that the bulk data handling of the i82593 is a good design for
|
|
an integrated system, like a laptop, where using two slave DMA channels
|
|
doesn't pose a problem. I still take issue with using only a single I/O
|
|
port. In the same controlled environment there are essentially no
|
|
limitations on I/O space, and using multiple locations would eliminate
|
|
the need for multiple operations when looking at status registers,
|
|
setting the Rx ring boundary, or switching to promiscuous mode.
|
|
|
|
I also question Zenith's selection of the '593: one of the advertised
|
|
advantages of earlier Intel parts was that if you figured out the magic
|
|
initialization incantation you could use the same part on many different
|
|
network types. Zenith's use of the "FriendlyNet" (sic) connector rather
|
|
than an on-board transceiver leads me to believe that they were planning
|
|
to take advantage of this. But, uhmmm, the '593 omits all but ethernet
|
|
functionality from the serial subsystem.
|
|
*/
|
|
|
|
/* 10/2002
|
|
|
|
o Resurected for Linux 2.5+ by Marc Zyngier <maz@wild-wind.fr.eu.org> :
|
|
|
|
- Removed strange DMA snooping in znet_sent_packet, which lead to
|
|
TX buffer corruption on my laptop.
|
|
- Use init_etherdev stuff.
|
|
- Use kmalloc-ed DMA buffers.
|
|
- Use as few global variables as possible.
|
|
- Use proper resources management.
|
|
- Use wireless/i82593.h as much as possible (structure, constants)
|
|
- Compiles as module or build-in.
|
|
- Now survives unplugging/replugging cable.
|
|
|
|
Some code was taken from wavelan_cs.
|
|
|
|
Tested on a vintage Zenith Z-Note 433Lnp+. Probably broken on
|
|
anything else. Testers (and detailed bug reports) are welcome :-).
|
|
|
|
o TODO :
|
|
|
|
- Properly handle multicast
|
|
- Understand why some traffic patterns add a 1s latency...
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/if_arp.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/system.h>
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
|
|
/* This include could be elsewhere, since it is not wireless specific */
|
|
#include "wireless/i82593.h"
|
|
|
|
static char version[] __initdata = "znet.c:v1.02 9/23/94 becker@scyld.com\n";
|
|
|
|
#ifndef ZNET_DEBUG
|
|
#define ZNET_DEBUG 1
|
|
#endif
|
|
static unsigned int znet_debug = ZNET_DEBUG;
|
|
module_param (znet_debug, int, 0);
|
|
MODULE_PARM_DESC (znet_debug, "ZNet debug level");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
/* The DMA modes we need aren't in <dma.h>. */
|
|
#define DMA_RX_MODE 0x14 /* Auto init, I/O to mem, ++, demand. */
|
|
#define DMA_TX_MODE 0x18 /* Auto init, Mem to I/O, ++, demand. */
|
|
#define dma_page_eq(ptr1, ptr2) ((long)(ptr1)>>17 == (long)(ptr2)>>17)
|
|
#define RX_BUF_SIZE 8192
|
|
#define TX_BUF_SIZE 8192
|
|
#define DMA_BUF_SIZE (RX_BUF_SIZE + 16) /* 8k + 16 bytes for trailers */
|
|
|
|
#define TX_TIMEOUT 10
|
|
|
|
struct znet_private {
|
|
int rx_dma, tx_dma;
|
|
spinlock_t lock;
|
|
short sia_base, sia_size, io_size;
|
|
struct i82593_conf_block i593_init;
|
|
/* The starting, current, and end pointers for the packet buffers. */
|
|
ushort *rx_start, *rx_cur, *rx_end;
|
|
ushort *tx_start, *tx_cur, *tx_end;
|
|
ushort tx_buf_len; /* Tx buffer length, in words. */
|
|
};
|
|
|
|
/* Only one can be built-in;-> */
|
|
static struct net_device *znet_dev;
|
|
|
|
struct netidblk {
|
|
char magic[8]; /* The magic number (string) "NETIDBLK" */
|
|
unsigned char netid[8]; /* The physical station address */
|
|
char nettype, globalopt;
|
|
char vendor[8]; /* The machine vendor and product name. */
|
|
char product[8];
|
|
char irq1, irq2; /* Interrupts, only one is currently used. */
|
|
char dma1, dma2;
|
|
short dma_mem_misc[8]; /* DMA buffer locations (unused in Linux). */
|
|
short iobase1, iosize1;
|
|
short iobase2, iosize2; /* Second iobase unused. */
|
|
char driver_options; /* Misc. bits */
|
|
char pad;
|
|
};
|
|
|
|
static int znet_open(struct net_device *dev);
|
|
static int znet_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t znet_interrupt(int irq, void *dev_id);
|
|
static void znet_rx(struct net_device *dev);
|
|
static int znet_close(struct net_device *dev);
|
|
static void hardware_init(struct net_device *dev);
|
|
static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset);
|
|
static void znet_tx_timeout (struct net_device *dev);
|
|
|
|
/* Request needed resources */
|
|
static int znet_request_resources (struct net_device *dev)
|
|
{
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
if (request_irq (dev->irq, &znet_interrupt, 0, "ZNet", dev))
|
|
goto failed;
|
|
if (request_dma (znet->rx_dma, "ZNet rx"))
|
|
goto free_irq;
|
|
if (request_dma (znet->tx_dma, "ZNet tx"))
|
|
goto free_rx_dma;
|
|
if (!request_region (znet->sia_base, znet->sia_size, "ZNet SIA"))
|
|
goto free_tx_dma;
|
|
if (!request_region (dev->base_addr, znet->io_size, "ZNet I/O"))
|
|
goto free_sia;
|
|
|
|
return 0; /* Happy ! */
|
|
|
|
free_sia:
|
|
release_region (znet->sia_base, znet->sia_size);
|
|
free_tx_dma:
|
|
flags = claim_dma_lock();
|
|
free_dma (znet->tx_dma);
|
|
release_dma_lock (flags);
|
|
free_rx_dma:
|
|
flags = claim_dma_lock();
|
|
free_dma (znet->rx_dma);
|
|
release_dma_lock (flags);
|
|
free_irq:
|
|
free_irq (dev->irq, dev);
|
|
failed:
|
|
return -1;
|
|
}
|
|
|
|
static void znet_release_resources (struct net_device *dev)
|
|
{
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
unsigned long flags;
|
|
|
|
release_region (znet->sia_base, znet->sia_size);
|
|
release_region (dev->base_addr, znet->io_size);
|
|
flags = claim_dma_lock();
|
|
free_dma (znet->tx_dma);
|
|
free_dma (znet->rx_dma);
|
|
release_dma_lock (flags);
|
|
free_irq (dev->irq, dev);
|
|
}
|
|
|
|
/* Keep the magical SIA stuff in a single function... */
|
|
static void znet_transceiver_power (struct net_device *dev, int on)
|
|
{
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
unsigned char v;
|
|
|
|
/* Turn on/off the 82501 SIA, using zenith-specific magic. */
|
|
/* Select LAN control register */
|
|
outb(0x10, znet->sia_base);
|
|
|
|
if (on)
|
|
v = inb(znet->sia_base + 1) | 0x84;
|
|
else
|
|
v = inb(znet->sia_base + 1) & ~0x84;
|
|
|
|
outb(v, znet->sia_base+1); /* Turn on/off LAN power (bit 2). */
|
|
}
|
|
|
|
/* Init the i82593, with current promisc/mcast configuration.
|
|
Also used from hardware_init. */
|
|
static void znet_set_multicast_list (struct net_device *dev)
|
|
{
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
short ioaddr = dev->base_addr;
|
|
struct i82593_conf_block *cfblk = &znet->i593_init;
|
|
|
|
memset(cfblk, 0x00, sizeof(struct i82593_conf_block));
|
|
|
|
/* The configuration block. What an undocumented nightmare.
|
|
The first set of values are those suggested (without explanation)
|
|
for ethernet in the Intel 82586 databook. The rest appear to be
|
|
completely undocumented, except for cryptic notes in the Crynwr
|
|
packet driver. This driver uses the Crynwr values verbatim. */
|
|
|
|
/* maz : Rewritten to take advantage of the wanvelan includes.
|
|
At least we have names, not just blind values */
|
|
|
|
/* Byte 0 */
|
|
cfblk->fifo_limit = 10; /* = 16 B rx and 80 B tx fifo thresholds */
|
|
cfblk->forgnesi = 0; /* 0=82C501, 1=AMD7992B compatibility */
|
|
cfblk->fifo_32 = 1;
|
|
cfblk->d6mod = 0; /* Run in i82593 advanced mode */
|
|
cfblk->throttle_enb = 1;
|
|
|
|
/* Byte 1 */
|
|
cfblk->throttle = 8; /* Continuous w/interrupts, 128-clock DMA. */
|
|
cfblk->cntrxint = 0; /* enable continuous mode receive interrupts */
|
|
cfblk->contin = 1; /* enable continuous mode */
|
|
|
|
/* Byte 2 */
|
|
cfblk->addr_len = ETH_ALEN;
|
|
cfblk->acloc = 1; /* Disable source addr insertion by i82593 */
|
|
cfblk->preamb_len = 2; /* 8 bytes preamble */
|
|
cfblk->loopback = 0; /* Loopback off */
|
|
|
|
/* Byte 3 */
|
|
cfblk->lin_prio = 0; /* Default priorities & backoff methods. */
|
|
cfblk->tbofstop = 0;
|
|
cfblk->exp_prio = 0;
|
|
cfblk->bof_met = 0;
|
|
|
|
/* Byte 4 */
|
|
cfblk->ifrm_spc = 6; /* 96 bit times interframe spacing */
|
|
|
|
/* Byte 5 */
|
|
cfblk->slottim_low = 0; /* 512 bit times slot time (low) */
|
|
|
|
/* Byte 6 */
|
|
cfblk->slottim_hi = 2; /* 512 bit times slot time (high) */
|
|
cfblk->max_retr = 15; /* 15 collisions retries */
|
|
|
|
/* Byte 7 */
|
|
cfblk->prmisc = ((dev->flags & IFF_PROMISC) ? 1 : 0); /* Promiscuous mode */
|
|
cfblk->bc_dis = 0; /* Enable broadcast reception */
|
|
cfblk->crs_1 = 0; /* Don't transmit without carrier sense */
|
|
cfblk->nocrc_ins = 0; /* i82593 generates CRC */
|
|
cfblk->crc_1632 = 0; /* 32-bit Autodin-II CRC */
|
|
cfblk->crs_cdt = 0; /* CD not to be interpreted as CS */
|
|
|
|
/* Byte 8 */
|
|
cfblk->cs_filter = 0; /* CS is recognized immediately */
|
|
cfblk->crs_src = 0; /* External carrier sense */
|
|
cfblk->cd_filter = 0; /* CD is recognized immediately */
|
|
|
|
/* Byte 9 */
|
|
cfblk->min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length */
|
|
|
|
/* Byte A */
|
|
cfblk->lng_typ = 1; /* Type/length checks OFF */
|
|
cfblk->lng_fld = 1; /* Disable 802.3 length field check */
|
|
cfblk->rxcrc_xf = 1; /* Don't transfer CRC to memory */
|
|
cfblk->artx = 1; /* Disable automatic retransmission */
|
|
cfblk->sarec = 1; /* Disable source addr trig of CD */
|
|
cfblk->tx_jabber = 0; /* Disable jabber jam sequence */
|
|
cfblk->hash_1 = 1; /* Use bits 0-5 in mc address hash */
|
|
cfblk->lbpkpol = 0; /* Loopback pin active high */
|
|
|
|
/* Byte B */
|
|
cfblk->fdx = 0; /* Disable full duplex operation */
|
|
|
|
/* Byte C */
|
|
cfblk->dummy_6 = 0x3f; /* all ones, Default multicast addresses & backoff. */
|
|
cfblk->mult_ia = 0; /* No multiple individual addresses */
|
|
cfblk->dis_bof = 0; /* Disable the backoff algorithm ?! */
|
|
|
|
/* Byte D */
|
|
cfblk->dummy_1 = 1; /* set to 1 */
|
|
cfblk->tx_ifs_retrig = 3; /* Hmm... Disabled */
|
|
cfblk->mc_all = (dev->mc_list || (dev->flags&IFF_ALLMULTI));/* multicast all mode */
|
|
cfblk->rcv_mon = 0; /* Monitor mode disabled */
|
|
cfblk->frag_acpt = 0; /* Do not accept fragments */
|
|
cfblk->tstrttrs = 0; /* No start transmission threshold */
|
|
|
|
/* Byte E */
|
|
cfblk->fretx = 1; /* FIFO automatic retransmission */
|
|
cfblk->runt_eop = 0; /* drop "runt" packets */
|
|
cfblk->hw_sw_pin = 0; /* ?? */
|
|
cfblk->big_endn = 0; /* Big Endian ? no... */
|
|
cfblk->syncrqs = 1; /* Synchronous DRQ deassertion... */
|
|
cfblk->sttlen = 1; /* 6 byte status registers */
|
|
cfblk->rx_eop = 0; /* Signal EOP on packet reception */
|
|
cfblk->tx_eop = 0; /* Signal EOP on packet transmission */
|
|
|
|
/* Byte F */
|
|
cfblk->rbuf_size = RX_BUF_SIZE >> 12; /* Set receive buffer size */
|
|
cfblk->rcvstop = 1; /* Enable Receive Stop Register */
|
|
|
|
if (znet_debug > 2) {
|
|
int i;
|
|
unsigned char *c;
|
|
|
|
for (i = 0, c = (char *) cfblk; i < sizeof (*cfblk); i++)
|
|
printk ("%02X ", c[i]);
|
|
printk ("\n");
|
|
}
|
|
|
|
*znet->tx_cur++ = sizeof(struct i82593_conf_block);
|
|
memcpy(znet->tx_cur, cfblk, sizeof(struct i82593_conf_block));
|
|
znet->tx_cur += sizeof(struct i82593_conf_block)/2;
|
|
outb(OP0_CONFIGURE | CR0_CHNL, ioaddr);
|
|
|
|
/* XXX FIXME maz : Add multicast addresses here, so having a
|
|
* multicast address configured isn't equal to IFF_ALLMULTI */
|
|
}
|
|
|
|
/* The Z-Note probe is pretty easy. The NETIDBLK exists in the safe-to-probe
|
|
BIOS area. We just scan for the signature, and pull the vital parameters
|
|
out of the structure. */
|
|
|
|
static int __init znet_probe (void)
|
|
{
|
|
int i;
|
|
struct netidblk *netinfo;
|
|
struct znet_private *znet;
|
|
struct net_device *dev;
|
|
char *p;
|
|
int err = -ENOMEM;
|
|
|
|
/* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */
|
|
for(p = (char *)phys_to_virt(0xf0000); p < (char *)phys_to_virt(0x100000); p++)
|
|
if (*p == 'N' && strncmp(p, "NETIDBLK", 8) == 0)
|
|
break;
|
|
|
|
if (p >= (char *)phys_to_virt(0x100000)) {
|
|
if (znet_debug > 1)
|
|
printk(KERN_INFO "No Z-Note ethernet adaptor found.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev = alloc_etherdev(sizeof(struct znet_private));
|
|
if (!dev)
|
|
return -ENOMEM;
|
|
|
|
znet = netdev_priv(dev);
|
|
|
|
netinfo = (struct netidblk *)p;
|
|
dev->base_addr = netinfo->iobase1;
|
|
dev->irq = netinfo->irq1;
|
|
|
|
/* The station address is in the "netidblk" at 0x0f0000. */
|
|
for (i = 0; i < 6; i++)
|
|
dev->dev_addr[i] = netinfo->netid[i];
|
|
|
|
printk(KERN_INFO "%s: ZNET at %#3lx, %pM"
|
|
", using IRQ %d DMA %d and %d.\n",
|
|
dev->name, dev->base_addr, dev->dev_addr,
|
|
dev->irq, netinfo->dma1, netinfo->dma2);
|
|
|
|
if (znet_debug > 1) {
|
|
printk(KERN_INFO "%s: vendor '%16.16s' IRQ1 %d IRQ2 %d DMA1 %d DMA2 %d.\n",
|
|
dev->name, netinfo->vendor,
|
|
netinfo->irq1, netinfo->irq2,
|
|
netinfo->dma1, netinfo->dma2);
|
|
printk(KERN_INFO "%s: iobase1 %#x size %d iobase2 %#x size %d net type %2.2x.\n",
|
|
dev->name, netinfo->iobase1, netinfo->iosize1,
|
|
netinfo->iobase2, netinfo->iosize2, netinfo->nettype);
|
|
}
|
|
|
|
if (znet_debug > 0)
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
znet->rx_dma = netinfo->dma1;
|
|
znet->tx_dma = netinfo->dma2;
|
|
spin_lock_init(&znet->lock);
|
|
znet->sia_base = 0xe6; /* Magic address for the 82501 SIA */
|
|
znet->sia_size = 2;
|
|
/* maz: Despite the '593 being advertised above as using a
|
|
* single 8bits I/O port, this driver does many 16bits
|
|
* access. So set io_size accordingly */
|
|
znet->io_size = 2;
|
|
|
|
if (!(znet->rx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA)))
|
|
goto free_dev;
|
|
if (!(znet->tx_start = kmalloc (DMA_BUF_SIZE, GFP_KERNEL | GFP_DMA)))
|
|
goto free_rx;
|
|
|
|
if (!dma_page_eq (znet->rx_start, znet->rx_start + (RX_BUF_SIZE/2-1)) ||
|
|
!dma_page_eq (znet->tx_start, znet->tx_start + (TX_BUF_SIZE/2-1))) {
|
|
printk (KERN_WARNING "tx/rx crossing DMA frontiers, giving up\n");
|
|
goto free_tx;
|
|
}
|
|
|
|
znet->rx_end = znet->rx_start + RX_BUF_SIZE/2;
|
|
znet->tx_buf_len = TX_BUF_SIZE/2;
|
|
znet->tx_end = znet->tx_start + znet->tx_buf_len;
|
|
|
|
/* The ZNET-specific entries in the device structure. */
|
|
dev->open = &znet_open;
|
|
dev->hard_start_xmit = &znet_send_packet;
|
|
dev->stop = &znet_close;
|
|
dev->set_multicast_list = &znet_set_multicast_list;
|
|
dev->tx_timeout = znet_tx_timeout;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto free_tx;
|
|
znet_dev = dev;
|
|
return 0;
|
|
|
|
free_tx:
|
|
kfree(znet->tx_start);
|
|
free_rx:
|
|
kfree(znet->rx_start);
|
|
free_dev:
|
|
free_netdev(dev);
|
|
return err;
|
|
}
|
|
|
|
|
|
static int znet_open(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr;
|
|
|
|
if (znet_debug > 2)
|
|
printk(KERN_DEBUG "%s: znet_open() called.\n", dev->name);
|
|
|
|
/* These should never fail. You can't add devices to a sealed box! */
|
|
if (znet_request_resources (dev)) {
|
|
printk(KERN_WARNING "%s: Not opened -- resource busy?!?\n", dev->name);
|
|
return -EBUSY;
|
|
}
|
|
|
|
znet_transceiver_power (dev, 1);
|
|
|
|
/* According to the Crynwr driver we should wait 50 msec. for the
|
|
LAN clock to stabilize. My experiments indicates that the '593 can
|
|
be initialized immediately. The delay is probably needed for the
|
|
DC-to-DC converter to come up to full voltage, and for the oscillator
|
|
to be spot-on at 20Mhz before transmitting.
|
|
Until this proves to be a problem we rely on the higher layers for the
|
|
delay and save allocating a timer entry. */
|
|
|
|
/* maz : Well, I'm getting every time the following message
|
|
* without the delay on a 486@33. This machine is much too
|
|
* fast... :-) So maybe the Crynwr driver wasn't wrong after
|
|
* all, even if the message is completly harmless on my
|
|
* setup. */
|
|
mdelay (50);
|
|
|
|
/* This follows the packet driver's lead, and checks for success. */
|
|
if (inb(ioaddr) != 0x10 && inb(ioaddr) != 0x00)
|
|
printk(KERN_WARNING "%s: Problem turning on the transceiver power.\n",
|
|
dev->name);
|
|
|
|
hardware_init(dev);
|
|
netif_start_queue (dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static void znet_tx_timeout (struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr;
|
|
ushort event, tx_status, rx_offset, state;
|
|
|
|
outb (CR0_STATUS_0, ioaddr);
|
|
event = inb (ioaddr);
|
|
outb (CR0_STATUS_1, ioaddr);
|
|
tx_status = inw (ioaddr);
|
|
outb (CR0_STATUS_2, ioaddr);
|
|
rx_offset = inw (ioaddr);
|
|
outb (CR0_STATUS_3, ioaddr);
|
|
state = inb (ioaddr);
|
|
printk (KERN_WARNING "%s: transmit timed out, status %02x %04x %04x %02x,"
|
|
" resetting.\n", dev->name, event, tx_status, rx_offset, state);
|
|
if (tx_status == TX_LOST_CRS)
|
|
printk (KERN_WARNING "%s: Tx carrier error, check transceiver cable.\n",
|
|
dev->name);
|
|
outb (OP0_RESET, ioaddr);
|
|
hardware_init (dev);
|
|
netif_wake_queue (dev);
|
|
}
|
|
|
|
static int znet_send_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr;
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
unsigned long flags;
|
|
short length = skb->len;
|
|
|
|
if (znet_debug > 4)
|
|
printk(KERN_DEBUG "%s: ZNet_send_packet.\n", dev->name);
|
|
|
|
if (length < ETH_ZLEN) {
|
|
if (skb_padto(skb, ETH_ZLEN))
|
|
return 0;
|
|
length = ETH_ZLEN;
|
|
}
|
|
|
|
netif_stop_queue (dev);
|
|
|
|
/* Check that the part hasn't reset itself, probably from suspend. */
|
|
outb(CR0_STATUS_0, ioaddr);
|
|
if (inw(ioaddr) == 0x0010 &&
|
|
inw(ioaddr) == 0x0000 &&
|
|
inw(ioaddr) == 0x0010) {
|
|
if (znet_debug > 1)
|
|
printk (KERN_WARNING "%s : waking up\n", dev->name);
|
|
hardware_init(dev);
|
|
znet_transceiver_power (dev, 1);
|
|
}
|
|
|
|
if (1) {
|
|
unsigned char *buf = (void *)skb->data;
|
|
ushort *tx_link = znet->tx_cur - 1;
|
|
ushort rnd_len = (length + 1)>>1;
|
|
|
|
dev->stats.tx_bytes+=length;
|
|
|
|
if (znet->tx_cur >= znet->tx_end)
|
|
znet->tx_cur = znet->tx_start;
|
|
*znet->tx_cur++ = length;
|
|
if (znet->tx_cur + rnd_len + 1 > znet->tx_end) {
|
|
int semi_cnt = (znet->tx_end - znet->tx_cur)<<1; /* Cvrt to byte cnt. */
|
|
memcpy(znet->tx_cur, buf, semi_cnt);
|
|
rnd_len -= semi_cnt>>1;
|
|
memcpy(znet->tx_start, buf + semi_cnt, length - semi_cnt);
|
|
znet->tx_cur = znet->tx_start + rnd_len;
|
|
} else {
|
|
memcpy(znet->tx_cur, buf, skb->len);
|
|
znet->tx_cur += rnd_len;
|
|
}
|
|
*znet->tx_cur++ = 0;
|
|
|
|
spin_lock_irqsave(&znet->lock, flags);
|
|
{
|
|
*tx_link = OP0_TRANSMIT | CR0_CHNL;
|
|
/* Is this always safe to do? */
|
|
outb(OP0_TRANSMIT | CR0_CHNL, ioaddr);
|
|
}
|
|
spin_unlock_irqrestore (&znet->lock, flags);
|
|
|
|
dev->trans_start = jiffies;
|
|
netif_start_queue (dev);
|
|
|
|
if (znet_debug > 4)
|
|
printk(KERN_DEBUG "%s: Transmitter queued, length %d.\n", dev->name, length);
|
|
}
|
|
dev_kfree_skb(skb);
|
|
return 0;
|
|
}
|
|
|
|
/* The ZNET interrupt handler. */
|
|
static irqreturn_t znet_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
int ioaddr;
|
|
int boguscnt = 20;
|
|
int handled = 0;
|
|
|
|
spin_lock (&znet->lock);
|
|
|
|
ioaddr = dev->base_addr;
|
|
|
|
outb(CR0_STATUS_0, ioaddr);
|
|
do {
|
|
ushort status = inb(ioaddr);
|
|
if (znet_debug > 5) {
|
|
ushort result, rx_ptr, running;
|
|
outb(CR0_STATUS_1, ioaddr);
|
|
result = inw(ioaddr);
|
|
outb(CR0_STATUS_2, ioaddr);
|
|
rx_ptr = inw(ioaddr);
|
|
outb(CR0_STATUS_3, ioaddr);
|
|
running = inb(ioaddr);
|
|
printk(KERN_DEBUG "%s: interrupt, status %02x, %04x %04x %02x serial %d.\n",
|
|
dev->name, status, result, rx_ptr, running, boguscnt);
|
|
}
|
|
if ((status & SR0_INTERRUPT) == 0)
|
|
break;
|
|
|
|
handled = 1;
|
|
|
|
if ((status & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
|
|
(status & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
|
|
(status & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE) {
|
|
int tx_status;
|
|
outb(CR0_STATUS_1, ioaddr);
|
|
tx_status = inw(ioaddr);
|
|
/* It's undocumented, but tx_status seems to match the i82586. */
|
|
if (tx_status & TX_OK) {
|
|
dev->stats.tx_packets++;
|
|
dev->stats.collisions += tx_status & TX_NCOL_MASK;
|
|
} else {
|
|
if (tx_status & (TX_LOST_CTS | TX_LOST_CRS))
|
|
dev->stats.tx_carrier_errors++;
|
|
if (tx_status & TX_UND_RUN)
|
|
dev->stats.tx_fifo_errors++;
|
|
if (!(tx_status & TX_HRT_BEAT))
|
|
dev->stats.tx_heartbeat_errors++;
|
|
if (tx_status & TX_MAX_COL)
|
|
dev->stats.tx_aborted_errors++;
|
|
/* ...and the catch-all. */
|
|
if ((tx_status | (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL)) != (TX_LOST_CRS | TX_LOST_CTS | TX_UND_RUN | TX_HRT_BEAT | TX_MAX_COL))
|
|
dev->stats.tx_errors++;
|
|
|
|
/* Transceiver may be stuck if cable
|
|
* was removed while emiting a
|
|
* packet. Flip it off, then on to
|
|
* reset it. This is very empirical,
|
|
* but it seems to work. */
|
|
|
|
znet_transceiver_power (dev, 0);
|
|
znet_transceiver_power (dev, 1);
|
|
}
|
|
netif_wake_queue (dev);
|
|
}
|
|
|
|
if ((status & SR0_RECEPTION) ||
|
|
(status & SR0_EVENT_MASK) == SR0_STOP_REG_HIT) {
|
|
znet_rx(dev);
|
|
}
|
|
/* Clear the interrupts we've handled. */
|
|
outb(CR0_INT_ACK, ioaddr);
|
|
} while (boguscnt--);
|
|
|
|
spin_unlock (&znet->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void znet_rx(struct net_device *dev)
|
|
{
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
int ioaddr = dev->base_addr;
|
|
int boguscount = 1;
|
|
short next_frame_end_offset = 0; /* Offset of next frame start. */
|
|
short *cur_frame_end;
|
|
short cur_frame_end_offset;
|
|
|
|
outb(CR0_STATUS_2, ioaddr);
|
|
cur_frame_end_offset = inw(ioaddr);
|
|
|
|
if (cur_frame_end_offset == znet->rx_cur - znet->rx_start) {
|
|
printk(KERN_WARNING "%s: Interrupted, but nothing to receive, offset %03x.\n",
|
|
dev->name, cur_frame_end_offset);
|
|
return;
|
|
}
|
|
|
|
/* Use same method as the Crynwr driver: construct a forward list in
|
|
the same area of the backwards links we now have. This allows us to
|
|
pass packets to the upper layers in the order they were received --
|
|
important for fast-path sequential operations. */
|
|
while (znet->rx_start + cur_frame_end_offset != znet->rx_cur
|
|
&& ++boguscount < 5) {
|
|
unsigned short hi_cnt, lo_cnt, hi_status, lo_status;
|
|
int count, status;
|
|
|
|
if (cur_frame_end_offset < 4) {
|
|
/* Oh no, we have a special case: the frame trailer wraps around
|
|
the end of the ring buffer. We've saved space at the end of
|
|
the ring buffer for just this problem. */
|
|
memcpy(znet->rx_end, znet->rx_start, 8);
|
|
cur_frame_end_offset += (RX_BUF_SIZE/2);
|
|
}
|
|
cur_frame_end = znet->rx_start + cur_frame_end_offset - 4;
|
|
|
|
lo_status = *cur_frame_end++;
|
|
hi_status = *cur_frame_end++;
|
|
status = ((hi_status & 0xff) << 8) + (lo_status & 0xff);
|
|
lo_cnt = *cur_frame_end++;
|
|
hi_cnt = *cur_frame_end++;
|
|
count = ((hi_cnt & 0xff) << 8) + (lo_cnt & 0xff);
|
|
|
|
if (znet_debug > 5)
|
|
printk(KERN_DEBUG "Constructing trailer at location %03x, %04x %04x %04x %04x"
|
|
" count %#x status %04x.\n",
|
|
cur_frame_end_offset<<1, lo_status, hi_status, lo_cnt, hi_cnt,
|
|
count, status);
|
|
cur_frame_end[-4] = status;
|
|
cur_frame_end[-3] = next_frame_end_offset;
|
|
cur_frame_end[-2] = count;
|
|
next_frame_end_offset = cur_frame_end_offset;
|
|
cur_frame_end_offset -= ((count + 1)>>1) + 3;
|
|
if (cur_frame_end_offset < 0)
|
|
cur_frame_end_offset += RX_BUF_SIZE/2;
|
|
};
|
|
|
|
/* Now step forward through the list. */
|
|
do {
|
|
ushort *this_rfp_ptr = znet->rx_start + next_frame_end_offset;
|
|
int status = this_rfp_ptr[-4];
|
|
int pkt_len = this_rfp_ptr[-2];
|
|
|
|
if (znet_debug > 5)
|
|
printk(KERN_DEBUG "Looking at trailer ending at %04x status %04x length %03x"
|
|
" next %04x.\n", next_frame_end_offset<<1, status, pkt_len,
|
|
this_rfp_ptr[-3]<<1);
|
|
/* Once again we must assume that the i82586 docs apply. */
|
|
if ( ! (status & RX_RCV_OK)) { /* There was an error. */
|
|
dev->stats.rx_errors++;
|
|
if (status & RX_CRC_ERR) dev->stats.rx_crc_errors++;
|
|
if (status & RX_ALG_ERR) dev->stats.rx_frame_errors++;
|
|
#if 0
|
|
if (status & 0x0200) dev->stats.rx_over_errors++; /* Wrong. */
|
|
if (status & 0x0100) dev->stats.rx_fifo_errors++;
|
|
#else
|
|
/* maz : Wild guess... */
|
|
if (status & RX_OVRRUN) dev->stats.rx_over_errors++;
|
|
#endif
|
|
if (status & RX_SRT_FRM) dev->stats.rx_length_errors++;
|
|
} else if (pkt_len > 1536) {
|
|
dev->stats.rx_length_errors++;
|
|
} else {
|
|
/* Malloc up new buffer. */
|
|
struct sk_buff *skb;
|
|
|
|
skb = dev_alloc_skb(pkt_len);
|
|
if (skb == NULL) {
|
|
if (znet_debug)
|
|
printk(KERN_WARNING "%s: Memory squeeze, dropping packet.\n", dev->name);
|
|
dev->stats.rx_dropped++;
|
|
break;
|
|
}
|
|
|
|
if (&znet->rx_cur[(pkt_len+1)>>1] > znet->rx_end) {
|
|
int semi_cnt = (znet->rx_end - znet->rx_cur)<<1;
|
|
memcpy(skb_put(skb,semi_cnt), znet->rx_cur, semi_cnt);
|
|
memcpy(skb_put(skb,pkt_len-semi_cnt), znet->rx_start,
|
|
pkt_len - semi_cnt);
|
|
} else {
|
|
memcpy(skb_put(skb,pkt_len), znet->rx_cur, pkt_len);
|
|
if (znet_debug > 6) {
|
|
unsigned int *packet = (unsigned int *) skb->data;
|
|
printk(KERN_DEBUG "Packet data is %08x %08x %08x %08x.\n", packet[0],
|
|
packet[1], packet[2], packet[3]);
|
|
}
|
|
}
|
|
skb->protocol=eth_type_trans(skb,dev);
|
|
netif_rx(skb);
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += pkt_len;
|
|
}
|
|
znet->rx_cur = this_rfp_ptr;
|
|
if (znet->rx_cur >= znet->rx_end)
|
|
znet->rx_cur -= RX_BUF_SIZE/2;
|
|
update_stop_hit(ioaddr, (znet->rx_cur - znet->rx_start)<<1);
|
|
next_frame_end_offset = this_rfp_ptr[-3];
|
|
if (next_frame_end_offset == 0) /* Read all the frames? */
|
|
break; /* Done for now */
|
|
this_rfp_ptr = znet->rx_start + next_frame_end_offset;
|
|
} while (--boguscount);
|
|
|
|
/* If any worth-while packets have been received, dev_rint()
|
|
has done a mark_bh(INET_BH) for us and will work on them
|
|
when we get to the bottom-half routine. */
|
|
return;
|
|
}
|
|
|
|
/* The inverse routine to znet_open(). */
|
|
static int znet_close(struct net_device *dev)
|
|
{
|
|
int ioaddr = dev->base_addr;
|
|
|
|
netif_stop_queue (dev);
|
|
|
|
outb(OP0_RESET, ioaddr); /* CMD0_RESET */
|
|
|
|
if (znet_debug > 1)
|
|
printk(KERN_DEBUG "%s: Shutting down ethercard.\n", dev->name);
|
|
/* Turn off transceiver power. */
|
|
znet_transceiver_power (dev, 0);
|
|
|
|
znet_release_resources (dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void show_dma(struct net_device *dev)
|
|
{
|
|
short ioaddr = dev->base_addr;
|
|
unsigned char stat = inb (ioaddr);
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
unsigned long flags;
|
|
short dma_port = ((znet->tx_dma&3)<<2) + IO_DMA2_BASE;
|
|
unsigned addr = inb(dma_port);
|
|
short residue;
|
|
|
|
addr |= inb(dma_port) << 8;
|
|
residue = get_dma_residue(znet->tx_dma);
|
|
|
|
if (znet_debug > 1) {
|
|
flags=claim_dma_lock();
|
|
printk(KERN_DEBUG "Stat:%02x Addr: %04x cnt:%3x\n",
|
|
stat, addr<<1, residue);
|
|
release_dma_lock(flags);
|
|
}
|
|
}
|
|
|
|
/* Initialize the hardware. We have to do this when the board is open()ed
|
|
or when we come out of suspend mode. */
|
|
static void hardware_init(struct net_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
short ioaddr = dev->base_addr;
|
|
struct znet_private *znet = netdev_priv(dev);
|
|
|
|
znet->rx_cur = znet->rx_start;
|
|
znet->tx_cur = znet->tx_start;
|
|
|
|
/* Reset the chip, and start it up. */
|
|
outb(OP0_RESET, ioaddr);
|
|
|
|
flags=claim_dma_lock();
|
|
disable_dma(znet->rx_dma); /* reset by an interrupting task. */
|
|
clear_dma_ff(znet->rx_dma);
|
|
set_dma_mode(znet->rx_dma, DMA_RX_MODE);
|
|
set_dma_addr(znet->rx_dma, (unsigned int) znet->rx_start);
|
|
set_dma_count(znet->rx_dma, RX_BUF_SIZE);
|
|
enable_dma(znet->rx_dma);
|
|
/* Now set up the Tx channel. */
|
|
disable_dma(znet->tx_dma);
|
|
clear_dma_ff(znet->tx_dma);
|
|
set_dma_mode(znet->tx_dma, DMA_TX_MODE);
|
|
set_dma_addr(znet->tx_dma, (unsigned int) znet->tx_start);
|
|
set_dma_count(znet->tx_dma, znet->tx_buf_len<<1);
|
|
enable_dma(znet->tx_dma);
|
|
release_dma_lock(flags);
|
|
|
|
if (znet_debug > 1)
|
|
printk(KERN_DEBUG "%s: Initializing the i82593, rx buf %p tx buf %p\n",
|
|
dev->name, znet->rx_start,znet->tx_start);
|
|
/* Do an empty configure command, just like the Crynwr driver. This
|
|
resets to chip to its default values. */
|
|
*znet->tx_cur++ = 0;
|
|
*znet->tx_cur++ = 0;
|
|
show_dma(dev);
|
|
outb(OP0_CONFIGURE | CR0_CHNL, ioaddr);
|
|
|
|
znet_set_multicast_list (dev);
|
|
|
|
*znet->tx_cur++ = 6;
|
|
memcpy(znet->tx_cur, dev->dev_addr, 6);
|
|
znet->tx_cur += 3;
|
|
show_dma(dev);
|
|
outb(OP0_IA_SETUP | CR0_CHNL, ioaddr);
|
|
show_dma(dev);
|
|
|
|
update_stop_hit(ioaddr, 8192);
|
|
if (znet_debug > 1) printk(KERN_DEBUG "enabling Rx.\n");
|
|
outb(OP0_RCV_ENABLE, ioaddr);
|
|
netif_start_queue (dev);
|
|
}
|
|
|
|
static void update_stop_hit(short ioaddr, unsigned short rx_stop_offset)
|
|
{
|
|
outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, ioaddr);
|
|
if (znet_debug > 5)
|
|
printk(KERN_DEBUG "Updating stop hit with value %02x.\n",
|
|
(rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE);
|
|
outb((rx_stop_offset >> 6) | CR1_STOP_REG_UPDATE, ioaddr);
|
|
outb(OP1_SWIT_TO_PORT_0, ioaddr);
|
|
}
|
|
|
|
static __exit void znet_cleanup (void)
|
|
{
|
|
if (znet_dev) {
|
|
struct znet_private *znet = netdev_priv(znet_dev);
|
|
|
|
unregister_netdev (znet_dev);
|
|
kfree (znet->rx_start);
|
|
kfree (znet->tx_start);
|
|
free_netdev (znet_dev);
|
|
}
|
|
}
|
|
|
|
module_init (znet_probe);
|
|
module_exit (znet_cleanup);
|