mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Jeff Garzik](/assets/img/avatar_default.png)
Several arches used the exact same code for their parport irq handling. Make that code generic, in parport_irq_handler(). Also, s/__inline__/inline/ in include/linux/parport.h. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
286 lines
7.2 KiB
C
286 lines
7.2 KiB
C
/* Low-level parallel port routines for the Amiga built-in port
|
|
*
|
|
* Author: Joerg Dorchain <joerg@dorchain.net>
|
|
*
|
|
* This is a complete rewrite of the code, but based heaviy upon the old
|
|
* lp_intern. code.
|
|
*
|
|
* The built-in Amiga parallel port provides one port at a fixed address
|
|
* with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
|
|
* lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
|
|
* in hardware when the data register is accessed), and 1 input control line
|
|
* /ACK, able to cause an interrupt, but both not directly settable by
|
|
* software.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/parport.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/interrupt.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/amigahw.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/io.h>
|
|
#include <asm/amigaints.h>
|
|
|
|
#undef DEBUG
|
|
#ifdef DEBUG
|
|
#define DPRINTK printk
|
|
#else
|
|
#define DPRINTK(x...) do { } while (0)
|
|
#endif
|
|
|
|
static struct parport *this_port = NULL;
|
|
|
|
static void amiga_write_data(struct parport *p, unsigned char data)
|
|
{
|
|
DPRINTK(KERN_DEBUG "write_data %c\n",data);
|
|
/* Triggers also /STROBE. This behavior cannot be changed */
|
|
ciaa.prb = data;
|
|
mb();
|
|
}
|
|
|
|
static unsigned char amiga_read_data(struct parport *p)
|
|
{
|
|
/* Triggers also /STROBE. This behavior cannot be changed */
|
|
return ciaa.prb;
|
|
}
|
|
|
|
#if 0
|
|
static unsigned char control_pc_to_amiga(unsigned char control)
|
|
{
|
|
unsigned char ret = 0;
|
|
|
|
if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
|
|
;
|
|
if (control & PARPORT_CONTROL_INIT) /* INITP */
|
|
/* reset connected to cpu reset pin */;
|
|
if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
|
|
/* Not connected */;
|
|
if (control & PARPORT_CONTROL_STROBE) /* Strobe */
|
|
/* Handled only directly by hardware */;
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static unsigned char control_amiga_to_pc(unsigned char control)
|
|
{
|
|
return PARPORT_CONTROL_SELECT |
|
|
PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
|
|
/* fake value: interrupt enable, select in, no reset,
|
|
no autolf, no strobe - seems to be closest the wiring diagram */
|
|
}
|
|
|
|
static void amiga_write_control(struct parport *p, unsigned char control)
|
|
{
|
|
DPRINTK(KERN_DEBUG "write_control %02x\n",control);
|
|
/* No implementation possible */
|
|
}
|
|
|
|
static unsigned char amiga_read_control( struct parport *p)
|
|
{
|
|
DPRINTK(KERN_DEBUG "read_control \n");
|
|
return control_amiga_to_pc(0);
|
|
}
|
|
|
|
static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
|
|
{
|
|
unsigned char old;
|
|
|
|
DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
|
|
old = amiga_read_control(p);
|
|
amiga_write_control(p, (old & ~mask) ^ val);
|
|
return old;
|
|
}
|
|
|
|
#if 0 /* currently unused */
|
|
static unsigned char status_pc_to_amiga(unsigned char status)
|
|
{
|
|
unsigned char ret = 1;
|
|
|
|
if (status & PARPORT_STATUS_BUSY) /* Busy */
|
|
ret &= ~1;
|
|
if (status & PARPORT_STATUS_ACK) /* Ack */
|
|
/* handled in hardware */;
|
|
if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
|
|
ret |= 2;
|
|
if (status & PARPORT_STATUS_SELECT) /* select */
|
|
ret |= 4;
|
|
if (status & PARPORT_STATUS_ERROR) /* error */
|
|
/* not connected */;
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static unsigned char status_amiga_to_pc(unsigned char status)
|
|
{
|
|
unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
|
|
|
|
if (status & 1) /* Busy */
|
|
ret &= ~PARPORT_STATUS_BUSY;
|
|
if (status & 2) /* PaperOut */
|
|
ret |= PARPORT_STATUS_PAPEROUT;
|
|
if (status & 4) /* Selected */
|
|
ret |= PARPORT_STATUS_SELECT;
|
|
/* the rest is not connected or handled autonomously in hardware */
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned char amiga_read_status(struct parport *p)
|
|
{
|
|
unsigned char status;
|
|
|
|
status = status_amiga_to_pc(ciab.pra & 7);
|
|
DPRINTK(KERN_DEBUG "read_status %02x\n", status);
|
|
return status;
|
|
}
|
|
|
|
static void amiga_enable_irq(struct parport *p)
|
|
{
|
|
enable_irq(IRQ_AMIGA_CIAA_FLG);
|
|
}
|
|
|
|
static void amiga_disable_irq(struct parport *p)
|
|
{
|
|
disable_irq(IRQ_AMIGA_CIAA_FLG);
|
|
}
|
|
|
|
static void amiga_data_forward(struct parport *p)
|
|
{
|
|
DPRINTK(KERN_DEBUG "forward\n");
|
|
ciaa.ddrb = 0xff; /* all pins output */
|
|
mb();
|
|
}
|
|
|
|
static void amiga_data_reverse(struct parport *p)
|
|
{
|
|
DPRINTK(KERN_DEBUG "reverse\n");
|
|
ciaa.ddrb = 0; /* all pins input */
|
|
mb();
|
|
}
|
|
|
|
static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
|
|
{
|
|
s->u.amiga.data = 0;
|
|
s->u.amiga.datadir = 255;
|
|
s->u.amiga.status = 0;
|
|
s->u.amiga.statusdir = 0;
|
|
}
|
|
|
|
static void amiga_save_state(struct parport *p, struct parport_state *s)
|
|
{
|
|
mb();
|
|
s->u.amiga.data = ciaa.prb;
|
|
s->u.amiga.datadir = ciaa.ddrb;
|
|
s->u.amiga.status = ciab.pra & 7;
|
|
s->u.amiga.statusdir = ciab.ddra & 7;
|
|
mb();
|
|
}
|
|
|
|
static void amiga_restore_state(struct parport *p, struct parport_state *s)
|
|
{
|
|
mb();
|
|
ciaa.prb = s->u.amiga.data;
|
|
ciaa.ddrb = s->u.amiga.datadir;
|
|
ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
|
|
ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
|
|
mb();
|
|
}
|
|
|
|
static struct parport_operations pp_amiga_ops = {
|
|
.write_data = amiga_write_data,
|
|
.read_data = amiga_read_data,
|
|
|
|
.write_control = amiga_write_control,
|
|
.read_control = amiga_read_control,
|
|
.frob_control = amiga_frob_control,
|
|
|
|
.read_status = amiga_read_status,
|
|
|
|
.enable_irq = amiga_enable_irq,
|
|
.disable_irq = amiga_disable_irq,
|
|
|
|
.data_forward = amiga_data_forward,
|
|
.data_reverse = amiga_data_reverse,
|
|
|
|
.init_state = amiga_init_state,
|
|
.save_state = amiga_save_state,
|
|
.restore_state = amiga_restore_state,
|
|
|
|
.epp_write_data = parport_ieee1284_epp_write_data,
|
|
.epp_read_data = parport_ieee1284_epp_read_data,
|
|
.epp_write_addr = parport_ieee1284_epp_write_addr,
|
|
.epp_read_addr = parport_ieee1284_epp_read_addr,
|
|
|
|
.ecp_write_data = parport_ieee1284_ecp_write_data,
|
|
.ecp_read_data = parport_ieee1284_ecp_read_data,
|
|
.ecp_write_addr = parport_ieee1284_ecp_write_addr,
|
|
|
|
.compat_write_data = parport_ieee1284_write_compat,
|
|
.nibble_read_data = parport_ieee1284_read_nibble,
|
|
.byte_read_data = parport_ieee1284_read_byte,
|
|
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
/* ----------- Initialisation code --------------------------------- */
|
|
|
|
static int __init parport_amiga_init(void)
|
|
{
|
|
struct parport *p;
|
|
int err;
|
|
|
|
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_PARALLEL))
|
|
return -ENODEV;
|
|
|
|
err = -EBUSY;
|
|
if (!request_mem_region(CIAA_PHYSADDR-1+0x100, 0x100, "parallel"))
|
|
goto out_mem;
|
|
|
|
ciaa.ddrb = 0xff;
|
|
ciab.ddra &= 0xf8;
|
|
mb();
|
|
|
|
p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
|
|
PARPORT_DMA_NONE, &pp_amiga_ops);
|
|
if (!p)
|
|
goto out_port;
|
|
|
|
err = request_irq(IRQ_AMIGA_CIAA_FLG, parport_irq_handler, 0, p->name, p);
|
|
if (err)
|
|
goto out_irq;
|
|
|
|
this_port = p;
|
|
printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
|
|
/* XXX: set operating mode */
|
|
parport_announce_port(p);
|
|
|
|
return 0;
|
|
|
|
out_irq:
|
|
parport_put_port(p);
|
|
out_port:
|
|
release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
|
|
out_mem:
|
|
return err;
|
|
}
|
|
|
|
static void __exit parport_amiga_exit(void)
|
|
{
|
|
parport_remove_port(this_port);
|
|
if (this_port->irq != PARPORT_IRQ_NONE)
|
|
free_irq(IRQ_AMIGA_CIAA_FLG, this_port);
|
|
parport_put_port(this_port);
|
|
release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
|
|
}
|
|
|
|
|
|
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
|
|
MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
|
|
MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
module_init(parport_amiga_init)
|
|
module_exit(parport_amiga_exit)
|