mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-21 16:29:59 +00:00
![Russell King](/assets/img/avatar_default.png)
As suggested by Andrew Morton, remove memzero() - it's not supported on other architectures so use of it is a potential build breaking bug. Since the compiler optimizes memset(x,0,n) to __memzero() perfectly well, we don't miss out on the underlying benefits of memzero(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
1579 lines
42 KiB
C
1579 lines
42 KiB
C
/*
|
|
* linux/drivers/video/sa1100fb.c
|
|
*
|
|
* Copyright (C) 1999 Eric A. Thomas
|
|
* Based on acornfb.c Copyright (C) Russell King.
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file COPYING in the main directory of this archive for
|
|
* more details.
|
|
*
|
|
* StrongARM 1100 LCD Controller Frame Buffer Driver
|
|
*
|
|
* Please direct your questions and comments on this driver to the following
|
|
* email address:
|
|
*
|
|
* linux-arm-kernel@lists.arm.linux.org.uk
|
|
*
|
|
* Clean patches should be sent to the ARM Linux Patch System. Please see the
|
|
* following web page for more information:
|
|
*
|
|
* http://www.arm.linux.org.uk/developer/patches/info.shtml
|
|
*
|
|
* Thank you.
|
|
*
|
|
* Known problems:
|
|
* - With the Neponset plugged into an Assabet, LCD powerdown
|
|
* doesn't work (LCD stays powered up). Therefore we shouldn't
|
|
* blank the screen.
|
|
* - We don't limit the CPU clock rate nor the mode selection
|
|
* according to the available SDRAM bandwidth.
|
|
*
|
|
* Other notes:
|
|
* - Linear grayscale palettes and the kernel.
|
|
* Such code does not belong in the kernel. The kernel frame buffer
|
|
* drivers do not expect a linear colourmap, but a colourmap based on
|
|
* the VT100 standard mapping.
|
|
*
|
|
* If your _userspace_ requires a linear colourmap, then the setup of
|
|
* such a colourmap belongs _in userspace_, not in the kernel. Code
|
|
* to set the colourmap correctly from user space has been sent to
|
|
* David Neuer. It's around 8 lines of C code, plus another 4 to
|
|
* detect if we are using grayscale.
|
|
*
|
|
* - The following must never be specified in a panel definition:
|
|
* LCCR0_LtlEnd, LCCR3_PixClkDiv, LCCR3_VrtSnchL, LCCR3_HorSnchL
|
|
*
|
|
* - The following should be specified:
|
|
* either LCCR0_Color or LCCR0_Mono
|
|
* either LCCR0_Sngl or LCCR0_Dual
|
|
* either LCCR0_Act or LCCR0_Pas
|
|
* either LCCR3_OutEnH or LCCD3_OutEnL
|
|
* either LCCR3_PixRsEdg or LCCR3_PixFlEdg
|
|
* either LCCR3_ACBsDiv or LCCR3_ACBsCntOff
|
|
*
|
|
* Code Status:
|
|
* 1999/04/01:
|
|
* - Driver appears to be working for Brutus 320x200x8bpp mode. Other
|
|
* resolutions are working, but only the 8bpp mode is supported.
|
|
* Changes need to be made to the palette encode and decode routines
|
|
* to support 4 and 16 bpp modes.
|
|
* Driver is not designed to be a module. The FrameBuffer is statically
|
|
* allocated since dynamic allocation of a 300k buffer cannot be
|
|
* guaranteed.
|
|
*
|
|
* 1999/06/17:
|
|
* - FrameBuffer memory is now allocated at run-time when the
|
|
* driver is initialized.
|
|
*
|
|
* 2000/04/10: Nicolas Pitre <nico@cam.org>
|
|
* - Big cleanup for dynamic selection of machine type at run time.
|
|
*
|
|
* 2000/07/19: Jamey Hicks <jamey@crl.dec.com>
|
|
* - Support for Bitsy aka Compaq iPAQ H3600 added.
|
|
*
|
|
* 2000/08/07: Tak-Shing Chan <tchan.rd@idthk.com>
|
|
* Jeff Sutherland <jsutherland@accelent.com>
|
|
* - Resolved an issue caused by a change made to the Assabet's PLD
|
|
* earlier this year which broke the framebuffer driver for newer
|
|
* Phase 4 Assabets. Some other parameters were changed to optimize
|
|
* for the Sharp display.
|
|
*
|
|
* 2000/08/09: Kunihiko IMAI <imai@vasara.co.jp>
|
|
* - XP860 support added
|
|
*
|
|
* 2000/08/19: Mark Huang <mhuang@livetoy.com>
|
|
* - Allows standard options to be passed on the kernel command line
|
|
* for most common passive displays.
|
|
*
|
|
* 2000/08/29:
|
|
* - s/save_flags_cli/local_irq_save/
|
|
* - remove unneeded extra save_flags_cli in sa1100fb_enable_lcd_controller
|
|
*
|
|
* 2000/10/10: Erik Mouw <J.A.K.Mouw@its.tudelft.nl>
|
|
* - Updated LART stuff. Fixed some minor bugs.
|
|
*
|
|
* 2000/10/30: Murphy Chen <murphy@mail.dialogue.com.tw>
|
|
* - Pangolin support added
|
|
*
|
|
* 2000/10/31: Roman Jordan <jor@hoeft-wessel.de>
|
|
* - Huw Webpanel support added
|
|
*
|
|
* 2000/11/23: Eric Peng <ericpeng@coventive.com>
|
|
* - Freebird add
|
|
*
|
|
* 2001/02/07: Jamey Hicks <jamey.hicks@compaq.com>
|
|
* Cliff Brake <cbrake@accelent.com>
|
|
* - Added PM callback
|
|
*
|
|
* 2001/05/26: <rmk@arm.linux.org.uk>
|
|
* - Fix 16bpp so that (a) we use the right colours rather than some
|
|
* totally random colour depending on what was in page 0, and (b)
|
|
* we don't de-reference a NULL pointer.
|
|
* - remove duplicated implementation of consistent_alloc()
|
|
* - convert dma address types to dma_addr_t
|
|
* - remove unused 'montype' stuff
|
|
* - remove redundant zero inits of init_var after the initial
|
|
* memset.
|
|
* - remove allow_modeset (acornfb idea does not belong here)
|
|
*
|
|
* 2001/05/28: <rmk@arm.linux.org.uk>
|
|
* - massive cleanup - move machine dependent data into structures
|
|
* - I've left various #warnings in - if you see one, and know
|
|
* the hardware concerned, please get in contact with me.
|
|
*
|
|
* 2001/05/31: <rmk@arm.linux.org.uk>
|
|
* - Fix LCCR1 HSW value, fix all machine type specifications to
|
|
* keep values in line. (Please check your machine type specs)
|
|
*
|
|
* 2001/06/10: <rmk@arm.linux.org.uk>
|
|
* - Fiddle with the LCD controller from task context only; mainly
|
|
* so that we can run with interrupts on, and sleep.
|
|
* - Convert #warnings into #errors. No pain, no gain. ;)
|
|
*
|
|
* 2001/06/14: <rmk@arm.linux.org.uk>
|
|
* - Make the palette BPS value for 12bpp come out correctly.
|
|
* - Take notice of "greyscale" on any colour depth.
|
|
* - Make truecolor visuals use the RGB channel encoding information.
|
|
*
|
|
* 2001/07/02: <rmk@arm.linux.org.uk>
|
|
* - Fix colourmap problems.
|
|
*
|
|
* 2001/07/13: <abraham@2d3d.co.za>
|
|
* - Added support for the ICP LCD-Kit01 on LART. This LCD is
|
|
* manufactured by Prime View, model no V16C6448AB
|
|
*
|
|
* 2001/07/23: <rmk@arm.linux.org.uk>
|
|
* - Hand merge version from handhelds.org CVS tree. See patch
|
|
* notes for 595/1 for more information.
|
|
* - Drop 12bpp (it's 16bpp with different colour register mappings).
|
|
* - This hardware can not do direct colour. Therefore we don't
|
|
* support it.
|
|
*
|
|
* 2001/07/27: <rmk@arm.linux.org.uk>
|
|
* - Halve YRES on dual scan LCDs.
|
|
*
|
|
* 2001/08/22: <rmk@arm.linux.org.uk>
|
|
* - Add b/w iPAQ pixclock value.
|
|
*
|
|
* 2001/10/12: <rmk@arm.linux.org.uk>
|
|
* - Add patch 681/1 and clean up stork definitions.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/string.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/io.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/assabet.h>
|
|
#include <mach/shannon.h>
|
|
|
|
/*
|
|
* debugging?
|
|
*/
|
|
#define DEBUG 0
|
|
/*
|
|
* Complain if VAR is out of range.
|
|
*/
|
|
#define DEBUG_VAR 1
|
|
|
|
#undef ASSABET_PAL_VIDEO
|
|
|
|
#include "sa1100fb.h"
|
|
|
|
extern void (*sa1100fb_backlight_power)(int on);
|
|
extern void (*sa1100fb_lcd_power)(int on);
|
|
|
|
/*
|
|
* IMHO this looks wrong. In 8BPP, length should be 8.
|
|
*/
|
|
static struct sa1100fb_rgb rgb_8 = {
|
|
.red = { .offset = 0, .length = 4, },
|
|
.green = { .offset = 0, .length = 4, },
|
|
.blue = { .offset = 0, .length = 4, },
|
|
.transp = { .offset = 0, .length = 0, },
|
|
};
|
|
|
|
static struct sa1100fb_rgb def_rgb_16 = {
|
|
.red = { .offset = 11, .length = 5, },
|
|
.green = { .offset = 5, .length = 6, },
|
|
.blue = { .offset = 0, .length = 5, },
|
|
.transp = { .offset = 0, .length = 0, },
|
|
};
|
|
|
|
#ifdef CONFIG_SA1100_ASSABET
|
|
#ifndef ASSABET_PAL_VIDEO
|
|
/*
|
|
* The assabet uses a sharp LQ039Q2DS54 LCD module. It is actually
|
|
* takes an RGB666 signal, but we provide it with an RGB565 signal
|
|
* instead (def_rgb_16).
|
|
*/
|
|
static struct sa1100fb_mach_info lq039q2ds54_info __initdata = {
|
|
.pixclock = 171521, .bpp = 16,
|
|
.xres = 320, .yres = 240,
|
|
|
|
.hsync_len = 5, .vsync_len = 1,
|
|
.left_margin = 61, .upper_margin = 3,
|
|
.right_margin = 9, .lower_margin = 0,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
|
|
};
|
|
#else
|
|
static struct sa1100fb_mach_info pal_info __initdata = {
|
|
.pixclock = 67797, .bpp = 16,
|
|
.xres = 640, .yres = 512,
|
|
|
|
.hsync_len = 64, .vsync_len = 6,
|
|
.left_margin = 125, .upper_margin = 70,
|
|
.right_margin = 115, .lower_margin = 36,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
|
|
};
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CONFIG_SA1100_H3800
|
|
static struct sa1100fb_mach_info h3800_info __initdata = {
|
|
.pixclock = 174757, .bpp = 16,
|
|
.xres = 320, .yres = 240,
|
|
|
|
.hsync_len = 3, .vsync_len = 3,
|
|
.left_margin = 12, .upper_margin = 10,
|
|
.right_margin = 17, .lower_margin = 1,
|
|
|
|
.cmap_static = 1,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_SA1100_H3600
|
|
static struct sa1100fb_mach_info h3600_info __initdata = {
|
|
.pixclock = 174757, .bpp = 16,
|
|
.xres = 320, .yres = 240,
|
|
|
|
.hsync_len = 3, .vsync_len = 3,
|
|
.left_margin = 12, .upper_margin = 10,
|
|
.right_margin = 17, .lower_margin = 1,
|
|
|
|
.cmap_static = 1,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
|
|
};
|
|
|
|
static struct sa1100fb_rgb h3600_rgb_16 = {
|
|
.red = { .offset = 12, .length = 4, },
|
|
.green = { .offset = 7, .length = 4, },
|
|
.blue = { .offset = 1, .length = 4, },
|
|
.transp = { .offset = 0, .length = 0, },
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_SA1100_H3100
|
|
static struct sa1100fb_mach_info h3100_info __initdata = {
|
|
.pixclock = 406977, .bpp = 4,
|
|
.xres = 320, .yres = 240,
|
|
|
|
.hsync_len = 26, .vsync_len = 41,
|
|
.left_margin = 4, .upper_margin = 0,
|
|
.right_margin = 4, .lower_margin = 0,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
.cmap_greyscale = 1,
|
|
.cmap_inverse = 1,
|
|
|
|
.lccr0 = LCCR0_Mono | LCCR0_4PixMono | LCCR0_Sngl | LCCR0_Pas,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_SA1100_COLLIE
|
|
static struct sa1100fb_mach_info collie_info __initdata = {
|
|
.pixclock = 171521, .bpp = 16,
|
|
.xres = 320, .yres = 240,
|
|
|
|
.hsync_len = 5, .vsync_len = 1,
|
|
.left_margin = 11, .upper_margin = 2,
|
|
.right_margin = 30, .lower_margin = 0,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(2),
|
|
};
|
|
#endif
|
|
|
|
#ifdef LART_GREY_LCD
|
|
static struct sa1100fb_mach_info lart_grey_info __initdata = {
|
|
.pixclock = 150000, .bpp = 4,
|
|
.xres = 320, .yres = 240,
|
|
|
|
.hsync_len = 1, .vsync_len = 1,
|
|
.left_margin = 4, .upper_margin = 0,
|
|
.right_margin = 2, .lower_margin = 0,
|
|
|
|
.cmap_greyscale = 1,
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.lccr0 = LCCR0_Mono | LCCR0_Sngl | LCCR0_Pas | LCCR0_4PixMono,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixRsEdg | LCCR3_ACBsDiv(512),
|
|
};
|
|
#endif
|
|
#ifdef LART_COLOR_LCD
|
|
static struct sa1100fb_mach_info lart_color_info __initdata = {
|
|
.pixclock = 150000, .bpp = 16,
|
|
.xres = 320, .yres = 240,
|
|
|
|
.hsync_len = 2, .vsync_len = 3,
|
|
.left_margin = 69, .upper_margin = 14,
|
|
.right_margin = 8, .lower_margin = 4,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
|
|
};
|
|
#endif
|
|
#ifdef LART_VIDEO_OUT
|
|
static struct sa1100fb_mach_info lart_video_info __initdata = {
|
|
.pixclock = 39721, .bpp = 16,
|
|
.xres = 640, .yres = 480,
|
|
|
|
.hsync_len = 95, .vsync_len = 2,
|
|
.left_margin = 40, .upper_margin = 32,
|
|
.right_margin = 24, .lower_margin = 11,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnL | LCCR3_PixFlEdg | LCCR3_ACBsDiv(512),
|
|
};
|
|
#endif
|
|
|
|
#ifdef LART_KIT01_LCD
|
|
static struct sa1100fb_mach_info lart_kit01_info __initdata = {
|
|
.pixclock = 63291, .bpp = 16,
|
|
.xres = 640, .yres = 480,
|
|
|
|
.hsync_len = 64, .vsync_len = 3,
|
|
.left_margin = 122, .upper_margin = 45,
|
|
.right_margin = 10, .lower_margin = 10,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
|
|
.lccr3 = LCCR3_OutEnH | LCCR3_PixFlEdg
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_SA1100_SHANNON
|
|
static struct sa1100fb_mach_info shannon_info __initdata = {
|
|
.pixclock = 152500, .bpp = 8,
|
|
.xres = 640, .yres = 480,
|
|
|
|
.hsync_len = 4, .vsync_len = 3,
|
|
.left_margin = 2, .upper_margin = 0,
|
|
.right_margin = 1, .lower_margin = 0,
|
|
|
|
.sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
|
|
|
|
.lccr0 = LCCR0_Color | LCCR0_Dual | LCCR0_Pas,
|
|
.lccr3 = LCCR3_ACBsDiv(512),
|
|
};
|
|
#endif
|
|
|
|
|
|
|
|
static struct sa1100fb_mach_info * __init
|
|
sa1100fb_get_machine_info(struct sa1100fb_info *fbi)
|
|
{
|
|
struct sa1100fb_mach_info *inf = NULL;
|
|
|
|
/*
|
|
* R G B T
|
|
* default {11,5}, { 5,6}, { 0,5}, { 0,0}
|
|
* h3600 {12,4}, { 7,4}, { 1,4}, { 0,0}
|
|
* freebird { 8,4}, { 4,4}, { 0,4}, {12,4}
|
|
*/
|
|
#ifdef CONFIG_SA1100_ASSABET
|
|
if (machine_is_assabet()) {
|
|
#ifndef ASSABET_PAL_VIDEO
|
|
inf = &lq039q2ds54_info;
|
|
#else
|
|
inf = &pal_info;
|
|
#endif
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SA1100_H3100
|
|
if (machine_is_h3100()) {
|
|
inf = &h3100_info;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SA1100_H3600
|
|
if (machine_is_h3600()) {
|
|
inf = &h3600_info;
|
|
fbi->rgb[RGB_16] = &h3600_rgb_16;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SA1100_H3800
|
|
if (machine_is_h3800()) {
|
|
inf = &h3800_info;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SA1100_COLLIE
|
|
if (machine_is_collie()) {
|
|
inf = &collie_info;
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SA1100_LART
|
|
if (machine_is_lart()) {
|
|
#ifdef LART_GREY_LCD
|
|
inf = &lart_grey_info;
|
|
#endif
|
|
#ifdef LART_COLOR_LCD
|
|
inf = &lart_color_info;
|
|
#endif
|
|
#ifdef LART_VIDEO_OUT
|
|
inf = &lart_video_info;
|
|
#endif
|
|
#ifdef LART_KIT01_LCD
|
|
inf = &lart_kit01_info;
|
|
#endif
|
|
}
|
|
#endif
|
|
#ifdef CONFIG_SA1100_SHANNON
|
|
if (machine_is_shannon()) {
|
|
inf = &shannon_info;
|
|
}
|
|
#endif
|
|
return inf;
|
|
}
|
|
|
|
static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *);
|
|
static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state);
|
|
|
|
static inline void sa1100fb_schedule_work(struct sa1100fb_info *fbi, u_int state)
|
|
{
|
|
unsigned long flags;
|
|
|
|
local_irq_save(flags);
|
|
/*
|
|
* We need to handle two requests being made at the same time.
|
|
* There are two important cases:
|
|
* 1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE)
|
|
* We must perform the unblanking, which will do our REENABLE for us.
|
|
* 2. When we are blanking, but immediately unblank before we have
|
|
* blanked. We do the "REENABLE" thing here as well, just to be sure.
|
|
*/
|
|
if (fbi->task_state == C_ENABLE && state == C_REENABLE)
|
|
state = (u_int) -1;
|
|
if (fbi->task_state == C_DISABLE && state == C_ENABLE)
|
|
state = C_REENABLE;
|
|
|
|
if (state != (u_int)-1) {
|
|
fbi->task_state = state;
|
|
schedule_work(&fbi->task);
|
|
}
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
|
|
{
|
|
chan &= 0xffff;
|
|
chan >>= 16 - bf->length;
|
|
return chan << bf->offset;
|
|
}
|
|
|
|
/*
|
|
* Convert bits-per-pixel to a hardware palette PBS value.
|
|
*/
|
|
static inline u_int palette_pbs(struct fb_var_screeninfo *var)
|
|
{
|
|
int ret = 0;
|
|
switch (var->bits_per_pixel) {
|
|
case 4: ret = 0 << 12; break;
|
|
case 8: ret = 1 << 12; break;
|
|
case 16: ret = 2 << 12; break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sa1100fb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
|
|
u_int trans, struct fb_info *info)
|
|
{
|
|
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
|
|
u_int val, ret = 1;
|
|
|
|
if (regno < fbi->palette_size) {
|
|
val = ((red >> 4) & 0xf00);
|
|
val |= ((green >> 8) & 0x0f0);
|
|
val |= ((blue >> 12) & 0x00f);
|
|
|
|
if (regno == 0)
|
|
val |= palette_pbs(&fbi->fb.var);
|
|
|
|
fbi->palette_cpu[regno] = val;
|
|
ret = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int
|
|
sa1100fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
|
|
u_int trans, struct fb_info *info)
|
|
{
|
|
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
|
|
unsigned int val;
|
|
int ret = 1;
|
|
|
|
/*
|
|
* If inverse mode was selected, invert all the colours
|
|
* rather than the register number. The register number
|
|
* is what you poke into the framebuffer to produce the
|
|
* colour you requested.
|
|
*/
|
|
if (fbi->cmap_inverse) {
|
|
red = 0xffff - red;
|
|
green = 0xffff - green;
|
|
blue = 0xffff - blue;
|
|
}
|
|
|
|
/*
|
|
* If greyscale is true, then we convert the RGB value
|
|
* to greyscale no mater what visual we are using.
|
|
*/
|
|
if (fbi->fb.var.grayscale)
|
|
red = green = blue = (19595 * red + 38470 * green +
|
|
7471 * blue) >> 16;
|
|
|
|
switch (fbi->fb.fix.visual) {
|
|
case FB_VISUAL_TRUECOLOR:
|
|
/*
|
|
* 12 or 16-bit True Colour. We encode the RGB value
|
|
* according to the RGB bitfield information.
|
|
*/
|
|
if (regno < 16) {
|
|
u32 *pal = fbi->fb.pseudo_palette;
|
|
|
|
val = chan_to_field(red, &fbi->fb.var.red);
|
|
val |= chan_to_field(green, &fbi->fb.var.green);
|
|
val |= chan_to_field(blue, &fbi->fb.var.blue);
|
|
|
|
pal[regno] = val;
|
|
ret = 0;
|
|
}
|
|
break;
|
|
|
|
case FB_VISUAL_STATIC_PSEUDOCOLOR:
|
|
case FB_VISUAL_PSEUDOCOLOR:
|
|
ret = sa1100fb_setpalettereg(regno, red, green, blue, trans, info);
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
/*
|
|
* sa1100fb_display_dma_period()
|
|
* Calculate the minimum period (in picoseconds) between two DMA
|
|
* requests for the LCD controller. If we hit this, it means we're
|
|
* doing nothing but LCD DMA.
|
|
*/
|
|
static inline unsigned int sa1100fb_display_dma_period(struct fb_var_screeninfo *var)
|
|
{
|
|
/*
|
|
* Period = pixclock * bits_per_byte * bytes_per_transfer
|
|
* / memory_bits_per_pixel;
|
|
*/
|
|
return var->pixclock * 8 * 16 / var->bits_per_pixel;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* sa1100fb_check_var():
|
|
* Round up in the following order: bits_per_pixel, xres,
|
|
* yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
|
|
* bitfields, horizontal timing, vertical timing.
|
|
*/
|
|
static int
|
|
sa1100fb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
|
|
{
|
|
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
|
|
int rgbidx;
|
|
|
|
if (var->xres < MIN_XRES)
|
|
var->xres = MIN_XRES;
|
|
if (var->yres < MIN_YRES)
|
|
var->yres = MIN_YRES;
|
|
if (var->xres > fbi->max_xres)
|
|
var->xres = fbi->max_xres;
|
|
if (var->yres > fbi->max_yres)
|
|
var->yres = fbi->max_yres;
|
|
var->xres_virtual = max(var->xres_virtual, var->xres);
|
|
var->yres_virtual = max(var->yres_virtual, var->yres);
|
|
|
|
DPRINTK("var->bits_per_pixel=%d\n", var->bits_per_pixel);
|
|
switch (var->bits_per_pixel) {
|
|
case 4:
|
|
rgbidx = RGB_8;
|
|
break;
|
|
case 8:
|
|
rgbidx = RGB_8;
|
|
break;
|
|
case 16:
|
|
rgbidx = RGB_16;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Copy the RGB parameters for this display
|
|
* from the machine specific parameters.
|
|
*/
|
|
var->red = fbi->rgb[rgbidx]->red;
|
|
var->green = fbi->rgb[rgbidx]->green;
|
|
var->blue = fbi->rgb[rgbidx]->blue;
|
|
var->transp = fbi->rgb[rgbidx]->transp;
|
|
|
|
DPRINTK("RGBT length = %d:%d:%d:%d\n",
|
|
var->red.length, var->green.length, var->blue.length,
|
|
var->transp.length);
|
|
|
|
DPRINTK("RGBT offset = %d:%d:%d:%d\n",
|
|
var->red.offset, var->green.offset, var->blue.offset,
|
|
var->transp.offset);
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
printk(KERN_DEBUG "dma period = %d ps, clock = %d kHz\n",
|
|
sa1100fb_display_dma_period(var),
|
|
cpufreq_get(smp_processor_id()));
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void sa1100fb_set_truecolor(u_int is_true_color)
|
|
{
|
|
if (machine_is_assabet()) {
|
|
#if 1 // phase 4 or newer Assabet's
|
|
if (is_true_color)
|
|
ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
|
|
else
|
|
ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
|
|
#else
|
|
// older Assabet's
|
|
if (is_true_color)
|
|
ASSABET_BCR_clear(ASSABET_BCR_LCD_12RGB);
|
|
else
|
|
ASSABET_BCR_set(ASSABET_BCR_LCD_12RGB);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
/*
|
|
* sa1100fb_set_par():
|
|
* Set the user defined part of the display for the specified console
|
|
*/
|
|
static int sa1100fb_set_par(struct fb_info *info)
|
|
{
|
|
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
unsigned long palette_mem_size;
|
|
|
|
DPRINTK("set_par\n");
|
|
|
|
if (var->bits_per_pixel == 16)
|
|
fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
|
|
else if (!fbi->cmap_static)
|
|
fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
else {
|
|
/*
|
|
* Some people have weird ideas about wanting static
|
|
* pseudocolor maps. I suspect their user space
|
|
* applications are broken.
|
|
*/
|
|
fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
|
|
}
|
|
|
|
fbi->fb.fix.line_length = var->xres_virtual *
|
|
var->bits_per_pixel / 8;
|
|
fbi->palette_size = var->bits_per_pixel == 8 ? 256 : 16;
|
|
|
|
palette_mem_size = fbi->palette_size * sizeof(u16);
|
|
|
|
DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
|
|
|
|
fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
|
|
fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
|
|
|
|
/*
|
|
* Set (any) board control register to handle new color depth
|
|
*/
|
|
sa1100fb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
|
|
sa1100fb_activate_var(var, fbi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if 0
|
|
static int
|
|
sa1100fb_set_cmap(struct fb_cmap *cmap, int kspc, int con,
|
|
struct fb_info *info)
|
|
{
|
|
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
|
|
|
|
/*
|
|
* Make sure the user isn't doing something stupid.
|
|
*/
|
|
if (!kspc && (fbi->fb.var.bits_per_pixel == 16 || fbi->cmap_static))
|
|
return -EINVAL;
|
|
|
|
return gen_set_cmap(cmap, kspc, con, info);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Formal definition of the VESA spec:
|
|
* On
|
|
* This refers to the state of the display when it is in full operation
|
|
* Stand-By
|
|
* This defines an optional operating state of minimal power reduction with
|
|
* the shortest recovery time
|
|
* Suspend
|
|
* This refers to a level of power management in which substantial power
|
|
* reduction is achieved by the display. The display can have a longer
|
|
* recovery time from this state than from the Stand-by state
|
|
* Off
|
|
* This indicates that the display is consuming the lowest level of power
|
|
* and is non-operational. Recovery from this state may optionally require
|
|
* the user to manually power on the monitor
|
|
*
|
|
* Now, the fbdev driver adds an additional state, (blank), where they
|
|
* turn off the video (maybe by colormap tricks), but don't mess with the
|
|
* video itself: think of it semantically between on and Stand-By.
|
|
*
|
|
* So here's what we should do in our fbdev blank routine:
|
|
*
|
|
* VESA_NO_BLANKING (mode 0) Video on, front/back light on
|
|
* VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off
|
|
* VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off
|
|
* VESA_POWERDOWN (mode 3) Video off, front/back light off
|
|
*
|
|
* This will match the matrox implementation.
|
|
*/
|
|
/*
|
|
* sa1100fb_blank():
|
|
* Blank the display by setting all palette values to zero. Note, the
|
|
* 12 and 16 bpp modes don't really use the palette, so this will not
|
|
* blank the display in all modes.
|
|
*/
|
|
static int sa1100fb_blank(int blank, struct fb_info *info)
|
|
{
|
|
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
|
|
int i;
|
|
|
|
DPRINTK("sa1100fb_blank: blank=%d\n", blank);
|
|
|
|
switch (blank) {
|
|
case FB_BLANK_POWERDOWN:
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
case FB_BLANK_NORMAL:
|
|
if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
|
|
fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
|
|
for (i = 0; i < fbi->palette_size; i++)
|
|
sa1100fb_setpalettereg(i, 0, 0, 0, 0, info);
|
|
sa1100fb_schedule_work(fbi, C_DISABLE);
|
|
break;
|
|
|
|
case FB_BLANK_UNBLANK:
|
|
if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
|
|
fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
|
|
fb_set_cmap(&fbi->fb.cmap, info);
|
|
sa1100fb_schedule_work(fbi, C_ENABLE);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100fb_mmap(struct fb_info *info,
|
|
struct vm_area_struct *vma)
|
|
{
|
|
struct sa1100fb_info *fbi = (struct sa1100fb_info *)info;
|
|
unsigned long start, len, off = vma->vm_pgoff << PAGE_SHIFT;
|
|
|
|
if (off < info->fix.smem_len) {
|
|
vma->vm_pgoff += 1; /* skip over the palette */
|
|
return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu,
|
|
fbi->map_dma, fbi->map_size);
|
|
}
|
|
|
|
start = info->fix.mmio_start;
|
|
len = PAGE_ALIGN((start & ~PAGE_MASK) + info->fix.mmio_len);
|
|
|
|
if ((vma->vm_end - vma->vm_start + off) > len)
|
|
return -EINVAL;
|
|
|
|
off += start & PAGE_MASK;
|
|
vma->vm_pgoff = off >> PAGE_SHIFT;
|
|
vma->vm_flags |= VM_IO;
|
|
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
|
|
return io_remap_pfn_range(vma, vma->vm_start, off >> PAGE_SHIFT,
|
|
vma->vm_end - vma->vm_start,
|
|
vma->vm_page_prot);
|
|
}
|
|
|
|
static struct fb_ops sa1100fb_ops = {
|
|
.owner = THIS_MODULE,
|
|
.fb_check_var = sa1100fb_check_var,
|
|
.fb_set_par = sa1100fb_set_par,
|
|
// .fb_set_cmap = sa1100fb_set_cmap,
|
|
.fb_setcolreg = sa1100fb_setcolreg,
|
|
.fb_fillrect = cfb_fillrect,
|
|
.fb_copyarea = cfb_copyarea,
|
|
.fb_imageblit = cfb_imageblit,
|
|
.fb_blank = sa1100fb_blank,
|
|
.fb_mmap = sa1100fb_mmap,
|
|
};
|
|
|
|
/*
|
|
* Calculate the PCD value from the clock rate (in picoseconds).
|
|
* We take account of the PPCR clock setting.
|
|
*/
|
|
static inline unsigned int get_pcd(unsigned int pixclock, unsigned int cpuclock)
|
|
{
|
|
unsigned int pcd = cpuclock / 100;
|
|
|
|
pcd *= pixclock;
|
|
pcd /= 10000000;
|
|
|
|
return pcd + 1; /* make up for integer math truncations */
|
|
}
|
|
|
|
/*
|
|
* sa1100fb_activate_var():
|
|
* Configures LCD Controller based on entries in var parameter. Settings are
|
|
* only written to the controller if changes were made.
|
|
*/
|
|
static int sa1100fb_activate_var(struct fb_var_screeninfo *var, struct sa1100fb_info *fbi)
|
|
{
|
|
struct sa1100fb_lcd_reg new_regs;
|
|
u_int half_screen_size, yres, pcd;
|
|
u_long flags;
|
|
|
|
DPRINTK("Configuring SA1100 LCD\n");
|
|
|
|
DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
|
|
var->xres, var->hsync_len,
|
|
var->left_margin, var->right_margin);
|
|
DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
|
|
var->yres, var->vsync_len,
|
|
var->upper_margin, var->lower_margin);
|
|
|
|
#if DEBUG_VAR
|
|
if (var->xres < 16 || var->xres > 1024)
|
|
printk(KERN_ERR "%s: invalid xres %d\n",
|
|
fbi->fb.fix.id, var->xres);
|
|
if (var->hsync_len < 1 || var->hsync_len > 64)
|
|
printk(KERN_ERR "%s: invalid hsync_len %d\n",
|
|
fbi->fb.fix.id, var->hsync_len);
|
|
if (var->left_margin < 1 || var->left_margin > 255)
|
|
printk(KERN_ERR "%s: invalid left_margin %d\n",
|
|
fbi->fb.fix.id, var->left_margin);
|
|
if (var->right_margin < 1 || var->right_margin > 255)
|
|
printk(KERN_ERR "%s: invalid right_margin %d\n",
|
|
fbi->fb.fix.id, var->right_margin);
|
|
if (var->yres < 1 || var->yres > 1024)
|
|
printk(KERN_ERR "%s: invalid yres %d\n",
|
|
fbi->fb.fix.id, var->yres);
|
|
if (var->vsync_len < 1 || var->vsync_len > 64)
|
|
printk(KERN_ERR "%s: invalid vsync_len %d\n",
|
|
fbi->fb.fix.id, var->vsync_len);
|
|
if (var->upper_margin < 0 || var->upper_margin > 255)
|
|
printk(KERN_ERR "%s: invalid upper_margin %d\n",
|
|
fbi->fb.fix.id, var->upper_margin);
|
|
if (var->lower_margin < 0 || var->lower_margin > 255)
|
|
printk(KERN_ERR "%s: invalid lower_margin %d\n",
|
|
fbi->fb.fix.id, var->lower_margin);
|
|
#endif
|
|
|
|
new_regs.lccr0 = fbi->lccr0 |
|
|
LCCR0_LEN | LCCR0_LDM | LCCR0_BAM |
|
|
LCCR0_ERM | LCCR0_LtlEnd | LCCR0_DMADel(0);
|
|
|
|
new_regs.lccr1 =
|
|
LCCR1_DisWdth(var->xres) +
|
|
LCCR1_HorSnchWdth(var->hsync_len) +
|
|
LCCR1_BegLnDel(var->left_margin) +
|
|
LCCR1_EndLnDel(var->right_margin);
|
|
|
|
/*
|
|
* If we have a dual scan LCD, then we need to halve
|
|
* the YRES parameter.
|
|
*/
|
|
yres = var->yres;
|
|
if (fbi->lccr0 & LCCR0_Dual)
|
|
yres /= 2;
|
|
|
|
new_regs.lccr2 =
|
|
LCCR2_DisHght(yres) +
|
|
LCCR2_VrtSnchWdth(var->vsync_len) +
|
|
LCCR2_BegFrmDel(var->upper_margin) +
|
|
LCCR2_EndFrmDel(var->lower_margin);
|
|
|
|
pcd = get_pcd(var->pixclock, cpufreq_get(0));
|
|
new_regs.lccr3 = LCCR3_PixClkDiv(pcd) | fbi->lccr3 |
|
|
(var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
|
|
(var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
|
|
|
|
DPRINTK("nlccr0 = 0x%08lx\n", new_regs.lccr0);
|
|
DPRINTK("nlccr1 = 0x%08lx\n", new_regs.lccr1);
|
|
DPRINTK("nlccr2 = 0x%08lx\n", new_regs.lccr2);
|
|
DPRINTK("nlccr3 = 0x%08lx\n", new_regs.lccr3);
|
|
|
|
half_screen_size = var->bits_per_pixel;
|
|
half_screen_size = half_screen_size * var->xres * var->yres / 16;
|
|
|
|
/* Update shadow copy atomically */
|
|
local_irq_save(flags);
|
|
fbi->dbar1 = fbi->palette_dma;
|
|
fbi->dbar2 = fbi->screen_dma + half_screen_size;
|
|
|
|
fbi->reg_lccr0 = new_regs.lccr0;
|
|
fbi->reg_lccr1 = new_regs.lccr1;
|
|
fbi->reg_lccr2 = new_regs.lccr2;
|
|
fbi->reg_lccr3 = new_regs.lccr3;
|
|
local_irq_restore(flags);
|
|
|
|
/*
|
|
* Only update the registers if the controller is enabled
|
|
* and something has changed.
|
|
*/
|
|
if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) ||
|
|
(LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) ||
|
|
(DBAR1 != fbi->dbar1) || (DBAR2 != fbi->dbar2))
|
|
sa1100fb_schedule_work(fbi, C_REENABLE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* NOTE! The following functions are purely helpers for set_ctrlr_state.
|
|
* Do not call them directly; set_ctrlr_state does the correct serialisation
|
|
* to ensure that things happen in the right way 100% of time time.
|
|
* -- rmk
|
|
*/
|
|
static inline void __sa1100fb_backlight_power(struct sa1100fb_info *fbi, int on)
|
|
{
|
|
DPRINTK("backlight o%s\n", on ? "n" : "ff");
|
|
|
|
if (sa1100fb_backlight_power)
|
|
sa1100fb_backlight_power(on);
|
|
}
|
|
|
|
static inline void __sa1100fb_lcd_power(struct sa1100fb_info *fbi, int on)
|
|
{
|
|
DPRINTK("LCD power o%s\n", on ? "n" : "ff");
|
|
|
|
if (sa1100fb_lcd_power)
|
|
sa1100fb_lcd_power(on);
|
|
}
|
|
|
|
static void sa1100fb_setup_gpio(struct sa1100fb_info *fbi)
|
|
{
|
|
u_int mask = 0;
|
|
|
|
/*
|
|
* Enable GPIO<9:2> for LCD use if:
|
|
* 1. Active display, or
|
|
* 2. Color Dual Passive display
|
|
*
|
|
* see table 11.8 on page 11-27 in the SA1100 manual
|
|
* -- Erik.
|
|
*
|
|
* SA1110 spec update nr. 25 says we can and should
|
|
* clear LDD15 to 12 for 4 or 8bpp modes with active
|
|
* panels.
|
|
*/
|
|
if ((fbi->reg_lccr0 & LCCR0_CMS) == LCCR0_Color &&
|
|
(fbi->reg_lccr0 & (LCCR0_Dual|LCCR0_Act)) != 0) {
|
|
mask = GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9 | GPIO_LDD8;
|
|
|
|
if (fbi->fb.var.bits_per_pixel > 8 ||
|
|
(fbi->reg_lccr0 & (LCCR0_Dual|LCCR0_Act)) == LCCR0_Dual)
|
|
mask |= GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12;
|
|
|
|
}
|
|
|
|
if (mask) {
|
|
GPDR |= mask;
|
|
GAFR |= mask;
|
|
}
|
|
}
|
|
|
|
static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
|
|
{
|
|
DPRINTK("Enabling LCD controller\n");
|
|
|
|
/*
|
|
* Make sure the mode bits are present in the first palette entry
|
|
*/
|
|
fbi->palette_cpu[0] &= 0xcfff;
|
|
fbi->palette_cpu[0] |= palette_pbs(&fbi->fb.var);
|
|
|
|
/* Sequence from 11.7.10 */
|
|
LCCR3 = fbi->reg_lccr3;
|
|
LCCR2 = fbi->reg_lccr2;
|
|
LCCR1 = fbi->reg_lccr1;
|
|
LCCR0 = fbi->reg_lccr0 & ~LCCR0_LEN;
|
|
DBAR1 = fbi->dbar1;
|
|
DBAR2 = fbi->dbar2;
|
|
LCCR0 |= LCCR0_LEN;
|
|
|
|
if (machine_is_shannon()) {
|
|
GPDR |= SHANNON_GPIO_DISP_EN;
|
|
GPSR |= SHANNON_GPIO_DISP_EN;
|
|
}
|
|
|
|
DPRINTK("DBAR1 = 0x%08x\n", DBAR1);
|
|
DPRINTK("DBAR2 = 0x%08x\n", DBAR2);
|
|
DPRINTK("LCCR0 = 0x%08x\n", LCCR0);
|
|
DPRINTK("LCCR1 = 0x%08x\n", LCCR1);
|
|
DPRINTK("LCCR2 = 0x%08x\n", LCCR2);
|
|
DPRINTK("LCCR3 = 0x%08x\n", LCCR3);
|
|
}
|
|
|
|
static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
|
|
{
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
DPRINTK("Disabling LCD controller\n");
|
|
|
|
if (machine_is_shannon()) {
|
|
GPCR |= SHANNON_GPIO_DISP_EN;
|
|
}
|
|
|
|
set_current_state(TASK_UNINTERRUPTIBLE);
|
|
add_wait_queue(&fbi->ctrlr_wait, &wait);
|
|
|
|
LCSR = 0xffffffff; /* Clear LCD Status Register */
|
|
LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
|
|
LCCR0 &= ~LCCR0_LEN; /* Disable LCD Controller */
|
|
|
|
schedule_timeout(20 * HZ / 1000);
|
|
remove_wait_queue(&fbi->ctrlr_wait, &wait);
|
|
}
|
|
|
|
/*
|
|
* sa1100fb_handle_irq: Handle 'LCD DONE' interrupts.
|
|
*/
|
|
static irqreturn_t sa1100fb_handle_irq(int irq, void *dev_id)
|
|
{
|
|
struct sa1100fb_info *fbi = dev_id;
|
|
unsigned int lcsr = LCSR;
|
|
|
|
if (lcsr & LCSR_LDD) {
|
|
LCCR0 |= LCCR0_LDM;
|
|
wake_up(&fbi->ctrlr_wait);
|
|
}
|
|
|
|
LCSR = lcsr;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* This function must be called from task context only, since it will
|
|
* sleep when disabling the LCD controller, or if we get two contending
|
|
* processes trying to alter state.
|
|
*/
|
|
static void set_ctrlr_state(struct sa1100fb_info *fbi, u_int state)
|
|
{
|
|
u_int old_state;
|
|
|
|
mutex_lock(&fbi->ctrlr_lock);
|
|
|
|
old_state = fbi->state;
|
|
|
|
/*
|
|
* Hack around fbcon initialisation.
|
|
*/
|
|
if (old_state == C_STARTUP && state == C_REENABLE)
|
|
state = C_ENABLE;
|
|
|
|
switch (state) {
|
|
case C_DISABLE_CLKCHANGE:
|
|
/*
|
|
* Disable controller for clock change. If the
|
|
* controller is already disabled, then do nothing.
|
|
*/
|
|
if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
|
|
fbi->state = state;
|
|
sa1100fb_disable_controller(fbi);
|
|
}
|
|
break;
|
|
|
|
case C_DISABLE_PM:
|
|
case C_DISABLE:
|
|
/*
|
|
* Disable controller
|
|
*/
|
|
if (old_state != C_DISABLE) {
|
|
fbi->state = state;
|
|
|
|
__sa1100fb_backlight_power(fbi, 0);
|
|
if (old_state != C_DISABLE_CLKCHANGE)
|
|
sa1100fb_disable_controller(fbi);
|
|
__sa1100fb_lcd_power(fbi, 0);
|
|
}
|
|
break;
|
|
|
|
case C_ENABLE_CLKCHANGE:
|
|
/*
|
|
* Enable the controller after clock change. Only
|
|
* do this if we were disabled for the clock change.
|
|
*/
|
|
if (old_state == C_DISABLE_CLKCHANGE) {
|
|
fbi->state = C_ENABLE;
|
|
sa1100fb_enable_controller(fbi);
|
|
}
|
|
break;
|
|
|
|
case C_REENABLE:
|
|
/*
|
|
* Re-enable the controller only if it was already
|
|
* enabled. This is so we reprogram the control
|
|
* registers.
|
|
*/
|
|
if (old_state == C_ENABLE) {
|
|
sa1100fb_disable_controller(fbi);
|
|
sa1100fb_setup_gpio(fbi);
|
|
sa1100fb_enable_controller(fbi);
|
|
}
|
|
break;
|
|
|
|
case C_ENABLE_PM:
|
|
/*
|
|
* Re-enable the controller after PM. This is not
|
|
* perfect - think about the case where we were doing
|
|
* a clock change, and we suspended half-way through.
|
|
*/
|
|
if (old_state != C_DISABLE_PM)
|
|
break;
|
|
/* fall through */
|
|
|
|
case C_ENABLE:
|
|
/*
|
|
* Power up the LCD screen, enable controller, and
|
|
* turn on the backlight.
|
|
*/
|
|
if (old_state != C_ENABLE) {
|
|
fbi->state = C_ENABLE;
|
|
sa1100fb_setup_gpio(fbi);
|
|
__sa1100fb_lcd_power(fbi, 1);
|
|
sa1100fb_enable_controller(fbi);
|
|
__sa1100fb_backlight_power(fbi, 1);
|
|
}
|
|
break;
|
|
}
|
|
mutex_unlock(&fbi->ctrlr_lock);
|
|
}
|
|
|
|
/*
|
|
* Our LCD controller task (which is called when we blank or unblank)
|
|
* via keventd.
|
|
*/
|
|
static void sa1100fb_task(struct work_struct *w)
|
|
{
|
|
struct sa1100fb_info *fbi = container_of(w, struct sa1100fb_info, task);
|
|
u_int state = xchg(&fbi->task_state, -1);
|
|
|
|
set_ctrlr_state(fbi, state);
|
|
}
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
/*
|
|
* Calculate the minimum DMA period over all displays that we own.
|
|
* This, together with the SDRAM bandwidth defines the slowest CPU
|
|
* frequency that can be selected.
|
|
*/
|
|
static unsigned int sa1100fb_min_dma_period(struct sa1100fb_info *fbi)
|
|
{
|
|
#if 0
|
|
unsigned int min_period = (unsigned int)-1;
|
|
int i;
|
|
|
|
for (i = 0; i < MAX_NR_CONSOLES; i++) {
|
|
struct display *disp = &fb_display[i];
|
|
unsigned int period;
|
|
|
|
/*
|
|
* Do we own this display?
|
|
*/
|
|
if (disp->fb_info != &fbi->fb)
|
|
continue;
|
|
|
|
/*
|
|
* Ok, calculate its DMA period
|
|
*/
|
|
period = sa1100fb_display_dma_period(&disp->var);
|
|
if (period < min_period)
|
|
min_period = period;
|
|
}
|
|
|
|
return min_period;
|
|
#else
|
|
/*
|
|
* FIXME: we need to verify _all_ consoles.
|
|
*/
|
|
return sa1100fb_display_dma_period(&fbi->fb.var);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* CPU clock speed change handler. We need to adjust the LCD timing
|
|
* parameters when the CPU clock is adjusted by the power management
|
|
* subsystem.
|
|
*/
|
|
static int
|
|
sa1100fb_freq_transition(struct notifier_block *nb, unsigned long val,
|
|
void *data)
|
|
{
|
|
struct sa1100fb_info *fbi = TO_INF(nb, freq_transition);
|
|
struct cpufreq_freqs *f = data;
|
|
u_int pcd;
|
|
|
|
switch (val) {
|
|
case CPUFREQ_PRECHANGE:
|
|
set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
|
|
break;
|
|
|
|
case CPUFREQ_POSTCHANGE:
|
|
pcd = get_pcd(fbi->fb.var.pixclock, f->new);
|
|
fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
|
|
set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
sa1100fb_freq_policy(struct notifier_block *nb, unsigned long val,
|
|
void *data)
|
|
{
|
|
struct sa1100fb_info *fbi = TO_INF(nb, freq_policy);
|
|
struct cpufreq_policy *policy = data;
|
|
|
|
switch (val) {
|
|
case CPUFREQ_ADJUST:
|
|
case CPUFREQ_INCOMPATIBLE:
|
|
printk(KERN_DEBUG "min dma period: %d ps, "
|
|
"new clock %d kHz\n", sa1100fb_min_dma_period(fbi),
|
|
policy->max);
|
|
/* todo: fill in min/max values */
|
|
break;
|
|
case CPUFREQ_NOTIFY:
|
|
do {} while(0);
|
|
/* todo: panic if min/max values aren't fulfilled
|
|
* [can't really happen unless there's a bug in the
|
|
* CPU policy verififcation process *
|
|
*/
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM
|
|
/*
|
|
* Power management hooks. Note that we won't be called from IRQ context,
|
|
* unlike the blank functions above, so we may sleep.
|
|
*/
|
|
static int sa1100fb_suspend(struct platform_device *dev, pm_message_t state)
|
|
{
|
|
struct sa1100fb_info *fbi = platform_get_drvdata(dev);
|
|
|
|
set_ctrlr_state(fbi, C_DISABLE_PM);
|
|
return 0;
|
|
}
|
|
|
|
static int sa1100fb_resume(struct platform_device *dev)
|
|
{
|
|
struct sa1100fb_info *fbi = platform_get_drvdata(dev);
|
|
|
|
set_ctrlr_state(fbi, C_ENABLE_PM);
|
|
return 0;
|
|
}
|
|
#else
|
|
#define sa1100fb_suspend NULL
|
|
#define sa1100fb_resume NULL
|
|
#endif
|
|
|
|
/*
|
|
* sa1100fb_map_video_memory():
|
|
* Allocates the DRAM memory for the frame buffer. This buffer is
|
|
* remapped into a non-cached, non-buffered, memory region to
|
|
* allow palette and pixel writes to occur without flushing the
|
|
* cache. Once this area is remapped, all virtual memory
|
|
* access to the video memory should occur at the new region.
|
|
*/
|
|
static int __init sa1100fb_map_video_memory(struct sa1100fb_info *fbi)
|
|
{
|
|
/*
|
|
* We reserve one page for the palette, plus the size
|
|
* of the framebuffer.
|
|
*/
|
|
fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
|
|
fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
|
|
&fbi->map_dma, GFP_KERNEL);
|
|
|
|
if (fbi->map_cpu) {
|
|
fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE;
|
|
fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
|
|
/*
|
|
* FIXME: this is actually the wrong thing to place in
|
|
* smem_start. But fbdev suffers from the problem that
|
|
* it needs an API which doesn't exist (in this case,
|
|
* dma_writecombine_mmap)
|
|
*/
|
|
fbi->fb.fix.smem_start = fbi->screen_dma;
|
|
}
|
|
|
|
return fbi->map_cpu ? 0 : -ENOMEM;
|
|
}
|
|
|
|
/* Fake monspecs to fill in fbinfo structure */
|
|
static struct fb_monspecs monspecs __initdata = {
|
|
.hfmin = 30000,
|
|
.hfmax = 70000,
|
|
.vfmin = 50,
|
|
.vfmax = 65,
|
|
};
|
|
|
|
|
|
static struct sa1100fb_info * __init sa1100fb_init_fbinfo(struct device *dev)
|
|
{
|
|
struct sa1100fb_mach_info *inf;
|
|
struct sa1100fb_info *fbi;
|
|
|
|
fbi = kmalloc(sizeof(struct sa1100fb_info) + sizeof(u32) * 16,
|
|
GFP_KERNEL);
|
|
if (!fbi)
|
|
return NULL;
|
|
|
|
memset(fbi, 0, sizeof(struct sa1100fb_info));
|
|
fbi->dev = dev;
|
|
|
|
strcpy(fbi->fb.fix.id, SA1100_NAME);
|
|
|
|
fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
|
|
fbi->fb.fix.type_aux = 0;
|
|
fbi->fb.fix.xpanstep = 0;
|
|
fbi->fb.fix.ypanstep = 0;
|
|
fbi->fb.fix.ywrapstep = 0;
|
|
fbi->fb.fix.accel = FB_ACCEL_NONE;
|
|
|
|
fbi->fb.var.nonstd = 0;
|
|
fbi->fb.var.activate = FB_ACTIVATE_NOW;
|
|
fbi->fb.var.height = -1;
|
|
fbi->fb.var.width = -1;
|
|
fbi->fb.var.accel_flags = 0;
|
|
fbi->fb.var.vmode = FB_VMODE_NONINTERLACED;
|
|
|
|
fbi->fb.fbops = &sa1100fb_ops;
|
|
fbi->fb.flags = FBINFO_DEFAULT;
|
|
fbi->fb.monspecs = monspecs;
|
|
fbi->fb.pseudo_palette = (fbi + 1);
|
|
|
|
fbi->rgb[RGB_8] = &rgb_8;
|
|
fbi->rgb[RGB_16] = &def_rgb_16;
|
|
|
|
inf = sa1100fb_get_machine_info(fbi);
|
|
|
|
/*
|
|
* People just don't seem to get this. We don't support
|
|
* anything but correct entries now, so panic if someone
|
|
* does something stupid.
|
|
*/
|
|
if (inf->lccr3 & (LCCR3_VrtSnchL|LCCR3_HorSnchL|0xff) ||
|
|
inf->pixclock == 0)
|
|
panic("sa1100fb error: invalid LCCR3 fields set or zero "
|
|
"pixclock.");
|
|
|
|
fbi->max_xres = inf->xres;
|
|
fbi->fb.var.xres = inf->xres;
|
|
fbi->fb.var.xres_virtual = inf->xres;
|
|
fbi->max_yres = inf->yres;
|
|
fbi->fb.var.yres = inf->yres;
|
|
fbi->fb.var.yres_virtual = inf->yres;
|
|
fbi->max_bpp = inf->bpp;
|
|
fbi->fb.var.bits_per_pixel = inf->bpp;
|
|
fbi->fb.var.pixclock = inf->pixclock;
|
|
fbi->fb.var.hsync_len = inf->hsync_len;
|
|
fbi->fb.var.left_margin = inf->left_margin;
|
|
fbi->fb.var.right_margin = inf->right_margin;
|
|
fbi->fb.var.vsync_len = inf->vsync_len;
|
|
fbi->fb.var.upper_margin = inf->upper_margin;
|
|
fbi->fb.var.lower_margin = inf->lower_margin;
|
|
fbi->fb.var.sync = inf->sync;
|
|
fbi->fb.var.grayscale = inf->cmap_greyscale;
|
|
fbi->cmap_inverse = inf->cmap_inverse;
|
|
fbi->cmap_static = inf->cmap_static;
|
|
fbi->lccr0 = inf->lccr0;
|
|
fbi->lccr3 = inf->lccr3;
|
|
fbi->state = C_STARTUP;
|
|
fbi->task_state = (u_char)-1;
|
|
fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres *
|
|
fbi->max_bpp / 8;
|
|
|
|
init_waitqueue_head(&fbi->ctrlr_wait);
|
|
INIT_WORK(&fbi->task, sa1100fb_task);
|
|
mutex_init(&fbi->ctrlr_lock);
|
|
|
|
return fbi;
|
|
}
|
|
|
|
static int __init sa1100fb_probe(struct platform_device *pdev)
|
|
{
|
|
struct sa1100fb_info *fbi;
|
|
int ret, irq;
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0)
|
|
return -EINVAL;
|
|
|
|
if (!request_mem_region(0xb0100000, 0x10000, "LCD"))
|
|
return -EBUSY;
|
|
|
|
fbi = sa1100fb_init_fbinfo(&pdev->dev);
|
|
ret = -ENOMEM;
|
|
if (!fbi)
|
|
goto failed;
|
|
|
|
/* Initialize video memory */
|
|
ret = sa1100fb_map_video_memory(fbi);
|
|
if (ret)
|
|
goto failed;
|
|
|
|
ret = request_irq(irq, sa1100fb_handle_irq, IRQF_DISABLED,
|
|
"LCD", fbi);
|
|
if (ret) {
|
|
printk(KERN_ERR "sa1100fb: request_irq failed: %d\n", ret);
|
|
goto failed;
|
|
}
|
|
|
|
#ifdef ASSABET_PAL_VIDEO
|
|
if (machine_is_assabet())
|
|
ASSABET_BCR_clear(ASSABET_BCR_LCD_ON);
|
|
#endif
|
|
|
|
/*
|
|
* This makes sure that our colour bitfield
|
|
* descriptors are correctly initialised.
|
|
*/
|
|
sa1100fb_check_var(&fbi->fb.var, &fbi->fb);
|
|
|
|
platform_set_drvdata(pdev, fbi);
|
|
|
|
ret = register_framebuffer(&fbi->fb);
|
|
if (ret < 0)
|
|
goto err_free_irq;
|
|
|
|
#ifdef CONFIG_CPU_FREQ
|
|
fbi->freq_transition.notifier_call = sa1100fb_freq_transition;
|
|
fbi->freq_policy.notifier_call = sa1100fb_freq_policy;
|
|
cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
|
|
cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
|
|
#endif
|
|
|
|
/* This driver cannot be unloaded at the moment */
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(irq, fbi);
|
|
failed:
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(fbi);
|
|
release_mem_region(0xb0100000, 0x10000);
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver sa1100fb_driver = {
|
|
.probe = sa1100fb_probe,
|
|
.suspend = sa1100fb_suspend,
|
|
.resume = sa1100fb_resume,
|
|
.driver = {
|
|
.name = "sa11x0-fb",
|
|
},
|
|
};
|
|
|
|
int __init sa1100fb_init(void)
|
|
{
|
|
if (fb_get_options("sa1100fb", NULL))
|
|
return -ENODEV;
|
|
|
|
return platform_driver_register(&sa1100fb_driver);
|
|
}
|
|
|
|
int __init sa1100fb_setup(char *options)
|
|
{
|
|
#if 0
|
|
char *this_opt;
|
|
|
|
if (!options || !*options)
|
|
return 0;
|
|
|
|
while ((this_opt = strsep(&options, ",")) != NULL) {
|
|
|
|
if (!strncmp(this_opt, "bpp:", 4))
|
|
current_par.max_bpp =
|
|
simple_strtoul(this_opt + 4, NULL, 0);
|
|
|
|
if (!strncmp(this_opt, "lccr0:", 6))
|
|
lcd_shadow.lccr0 =
|
|
simple_strtoul(this_opt + 6, NULL, 0);
|
|
if (!strncmp(this_opt, "lccr1:", 6)) {
|
|
lcd_shadow.lccr1 =
|
|
simple_strtoul(this_opt + 6, NULL, 0);
|
|
current_par.max_xres =
|
|
(lcd_shadow.lccr1 & 0x3ff) + 16;
|
|
}
|
|
if (!strncmp(this_opt, "lccr2:", 6)) {
|
|
lcd_shadow.lccr2 =
|
|
simple_strtoul(this_opt + 6, NULL, 0);
|
|
current_par.max_yres =
|
|
(lcd_shadow.
|
|
lccr0 & LCCR0_SDS) ? ((lcd_shadow.
|
|
lccr2 & 0x3ff) +
|
|
1) *
|
|
2 : ((lcd_shadow.lccr2 & 0x3ff) + 1);
|
|
}
|
|
if (!strncmp(this_opt, "lccr3:", 6))
|
|
lcd_shadow.lccr3 =
|
|
simple_strtoul(this_opt + 6, NULL, 0);
|
|
}
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
module_init(sa1100fb_init);
|
|
MODULE_DESCRIPTION("StrongARM-1100/1110 framebuffer driver");
|
|
MODULE_LICENSE("GPL");
|