mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Bart Van Assche](/assets/img/avatar_default.png)
Set .cmd_size in the SCSI host template instead of using the SCSI pointer from struct scsi_cmnd. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. Link: https://lore.kernel.org/r/20220218195117.25689-49-bvanassche@acm.org Cc: Helge Deller <deller@gmx.de> Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
1303 lines
39 KiB
C
1303 lines
39 KiB
C
/* SPDX-License-Identifier: GPL-2.0-or-later */
|
|
/******************************************************************************
|
|
** Device driver for the PCI-SCSI NCR538XX controller family.
|
|
**
|
|
** Copyright (C) 1994 Wolfgang Stanglmeier
|
|
** Copyright (C) 1998-2001 Gerard Roudier <groudier@free.fr>
|
|
**
|
|
**
|
|
**-----------------------------------------------------------------------------
|
|
**
|
|
** This driver has been ported to Linux from the FreeBSD NCR53C8XX driver
|
|
** and is currently maintained by
|
|
**
|
|
** Gerard Roudier <groudier@free.fr>
|
|
**
|
|
** Being given that this driver originates from the FreeBSD version, and
|
|
** in order to keep synergy on both, any suggested enhancements and corrections
|
|
** received on Linux are automatically a potential candidate for the FreeBSD
|
|
** version.
|
|
**
|
|
** The original driver has been written for 386bsd and FreeBSD by
|
|
** Wolfgang Stanglmeier <wolf@cologne.de>
|
|
** Stefan Esser <se@mi.Uni-Koeln.de>
|
|
**
|
|
** And has been ported to NetBSD by
|
|
** Charles M. Hannum <mycroft@gnu.ai.mit.edu>
|
|
**
|
|
** NVRAM detection and reading.
|
|
** Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
|
|
**
|
|
** Added support for MIPS big endian systems.
|
|
** Carsten Langgaard, carstenl@mips.com
|
|
** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
|
|
**
|
|
** Added support for HP PARISC big endian systems.
|
|
** Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
|
|
**
|
|
*******************************************************************************
|
|
*/
|
|
|
|
#ifndef NCR53C8XX_H
|
|
#define NCR53C8XX_H
|
|
|
|
#include <scsi/scsi_host.h>
|
|
|
|
|
|
/*
|
|
** If you want a driver as small as possible, donnot define the
|
|
** following options.
|
|
*/
|
|
#define SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
|
|
#define SCSI_NCR_DEBUG_INFO_SUPPORT
|
|
|
|
/*
|
|
** To disable integrity checking, do not define the
|
|
** following option.
|
|
*/
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_INTEGRITY_CHECK
|
|
# define SCSI_NCR_ENABLE_INTEGRITY_CHECK
|
|
#endif
|
|
|
|
/* ---------------------------------------------------------------------
|
|
** Take into account kernel configured parameters.
|
|
** Most of these options can be overridden at startup by a command line.
|
|
** ---------------------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
* For Ultra2 and Ultra3 SCSI support option, use special features.
|
|
*
|
|
* Value (default) means:
|
|
* bit 0 : all features enabled, except:
|
|
* bit 1 : PCI Write And Invalidate.
|
|
* bit 2 : Data Phase Mismatch handling from SCRIPTS.
|
|
*
|
|
* Use boot options ncr53c8xx=specf:1 if you want all chip features to be
|
|
* enabled by the driver.
|
|
*/
|
|
#define SCSI_NCR_SETUP_SPECIAL_FEATURES (3)
|
|
|
|
#define SCSI_NCR_MAX_SYNC (80)
|
|
|
|
/*
|
|
* Allow tags from 2 to 256, default 8
|
|
*/
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_MAX_TAGS
|
|
#if CONFIG_SCSI_NCR53C8XX_MAX_TAGS < 2
|
|
#define SCSI_NCR_MAX_TAGS (2)
|
|
#elif CONFIG_SCSI_NCR53C8XX_MAX_TAGS > 256
|
|
#define SCSI_NCR_MAX_TAGS (256)
|
|
#else
|
|
#define SCSI_NCR_MAX_TAGS CONFIG_SCSI_NCR53C8XX_MAX_TAGS
|
|
#endif
|
|
#else
|
|
#define SCSI_NCR_MAX_TAGS (8)
|
|
#endif
|
|
|
|
/*
|
|
* Allow tagged command queuing support if configured with default number
|
|
* of tags set to max (see above).
|
|
*/
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
|
|
#define SCSI_NCR_SETUP_DEFAULT_TAGS CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS
|
|
#elif defined CONFIG_SCSI_NCR53C8XX_TAGGED_QUEUE
|
|
#define SCSI_NCR_SETUP_DEFAULT_TAGS SCSI_NCR_MAX_TAGS
|
|
#else
|
|
#define SCSI_NCR_SETUP_DEFAULT_TAGS (0)
|
|
#endif
|
|
|
|
/*
|
|
* Immediate arbitration
|
|
*/
|
|
#if defined(CONFIG_SCSI_NCR53C8XX_IARB)
|
|
#define SCSI_NCR_IARB_SUPPORT
|
|
#endif
|
|
|
|
/*
|
|
* Sync transfer frequency at startup.
|
|
* Allow from 5Mhz to 80Mhz default 20 Mhz.
|
|
*/
|
|
#ifndef CONFIG_SCSI_NCR53C8XX_SYNC
|
|
#define CONFIG_SCSI_NCR53C8XX_SYNC (20)
|
|
#elif CONFIG_SCSI_NCR53C8XX_SYNC > SCSI_NCR_MAX_SYNC
|
|
#undef CONFIG_SCSI_NCR53C8XX_SYNC
|
|
#define CONFIG_SCSI_NCR53C8XX_SYNC SCSI_NCR_MAX_SYNC
|
|
#endif
|
|
|
|
#if CONFIG_SCSI_NCR53C8XX_SYNC == 0
|
|
#define SCSI_NCR_SETUP_DEFAULT_SYNC (255)
|
|
#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 5
|
|
#define SCSI_NCR_SETUP_DEFAULT_SYNC (50)
|
|
#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 20
|
|
#define SCSI_NCR_SETUP_DEFAULT_SYNC (250/(CONFIG_SCSI_NCR53C8XX_SYNC))
|
|
#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 33
|
|
#define SCSI_NCR_SETUP_DEFAULT_SYNC (11)
|
|
#elif CONFIG_SCSI_NCR53C8XX_SYNC <= 40
|
|
#define SCSI_NCR_SETUP_DEFAULT_SYNC (10)
|
|
#else
|
|
#define SCSI_NCR_SETUP_DEFAULT_SYNC (9)
|
|
#endif
|
|
|
|
/*
|
|
* Disallow disconnections at boot-up
|
|
*/
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_NO_DISCONNECT
|
|
#define SCSI_NCR_SETUP_DISCONNECTION (0)
|
|
#else
|
|
#define SCSI_NCR_SETUP_DISCONNECTION (1)
|
|
#endif
|
|
|
|
/*
|
|
* Force synchronous negotiation for all targets
|
|
*/
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_FORCE_SYNC_NEGO
|
|
#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (1)
|
|
#else
|
|
#define SCSI_NCR_SETUP_FORCE_SYNC_NEGO (0)
|
|
#endif
|
|
|
|
/*
|
|
* Disable master parity checking (flawed hardwares need that)
|
|
*/
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_MPARITY_CHECK
|
|
#define SCSI_NCR_SETUP_MASTER_PARITY (0)
|
|
#else
|
|
#define SCSI_NCR_SETUP_MASTER_PARITY (1)
|
|
#endif
|
|
|
|
/*
|
|
* Disable scsi parity checking (flawed devices may need that)
|
|
*/
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_DISABLE_PARITY_CHECK
|
|
#define SCSI_NCR_SETUP_SCSI_PARITY (0)
|
|
#else
|
|
#define SCSI_NCR_SETUP_SCSI_PARITY (1)
|
|
#endif
|
|
|
|
/*
|
|
* Settle time after reset at boot-up
|
|
*/
|
|
#define SCSI_NCR_SETUP_SETTLE_TIME (2)
|
|
|
|
/*
|
|
** Bridge quirks work-around option defaulted to 1.
|
|
*/
|
|
#ifndef SCSI_NCR_PCIQ_WORK_AROUND_OPT
|
|
#define SCSI_NCR_PCIQ_WORK_AROUND_OPT 1
|
|
#endif
|
|
|
|
/*
|
|
** Work-around common bridge misbehaviour.
|
|
**
|
|
** - Do not flush posted writes in the opposite
|
|
** direction on read.
|
|
** - May reorder DMA writes to memory.
|
|
**
|
|
** This option should not affect performances
|
|
** significantly, so it is the default.
|
|
*/
|
|
#if SCSI_NCR_PCIQ_WORK_AROUND_OPT == 1
|
|
#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
|
|
#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
|
|
#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
|
|
|
|
/*
|
|
** Same as option 1, but also deal with
|
|
** misconfigured interrupts.
|
|
**
|
|
** - Edge triggered instead of level sensitive.
|
|
** - No interrupt line connected.
|
|
** - IRQ number misconfigured.
|
|
**
|
|
** If no interrupt is delivered, the driver will
|
|
** catch the interrupt conditions 10 times per
|
|
** second. No need to say that this option is
|
|
** not recommended.
|
|
*/
|
|
#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 2
|
|
#define SCSI_NCR_PCIQ_MAY_NOT_FLUSH_PW_UPSTREAM
|
|
#define SCSI_NCR_PCIQ_MAY_REORDER_WRITES
|
|
#define SCSI_NCR_PCIQ_MAY_MISS_COMPLETIONS
|
|
#define SCSI_NCR_PCIQ_BROKEN_INTR
|
|
|
|
/*
|
|
** Some bridge designers decided to flush
|
|
** everything prior to deliver the interrupt.
|
|
** This option tries to deal with such a
|
|
** behaviour.
|
|
*/
|
|
#elif SCSI_NCR_PCIQ_WORK_AROUND_OPT == 3
|
|
#define SCSI_NCR_PCIQ_SYNC_ON_INTR
|
|
#endif
|
|
|
|
/*
|
|
** Other parameters not configurable with "make config"
|
|
** Avoid to change these constants, unless you know what you are doing.
|
|
*/
|
|
|
|
#define SCSI_NCR_ALWAYS_SIMPLE_TAG
|
|
#define SCSI_NCR_MAX_SCATTER (127)
|
|
#define SCSI_NCR_MAX_TARGET (16)
|
|
|
|
/*
|
|
** Compute some desirable value for CAN_QUEUE
|
|
** and CMD_PER_LUN.
|
|
** The driver will use lower values if these
|
|
** ones appear to be too large.
|
|
*/
|
|
#define SCSI_NCR_CAN_QUEUE (8*SCSI_NCR_MAX_TAGS + 2*SCSI_NCR_MAX_TARGET)
|
|
#define SCSI_NCR_CMD_PER_LUN (SCSI_NCR_MAX_TAGS)
|
|
|
|
#define SCSI_NCR_SG_TABLESIZE (SCSI_NCR_MAX_SCATTER)
|
|
#define SCSI_NCR_TIMER_INTERVAL (HZ)
|
|
|
|
#define SCSI_NCR_MAX_LUN (16)
|
|
|
|
/*
|
|
* IO functions definition for big/little endian CPU support.
|
|
* For now, the NCR is only supported in little endian addressing mode,
|
|
*/
|
|
|
|
#ifdef __BIG_ENDIAN
|
|
|
|
#define inw_l2b inw
|
|
#define inl_l2b inl
|
|
#define outw_b2l outw
|
|
#define outl_b2l outl
|
|
|
|
#define readb_raw readb
|
|
#define writeb_raw writeb
|
|
|
|
#if defined(SCSI_NCR_BIG_ENDIAN)
|
|
#define readw_l2b __raw_readw
|
|
#define readl_l2b __raw_readl
|
|
#define writew_b2l __raw_writew
|
|
#define writel_b2l __raw_writel
|
|
#define readw_raw __raw_readw
|
|
#define readl_raw __raw_readl
|
|
#define writew_raw __raw_writew
|
|
#define writel_raw __raw_writel
|
|
#else /* Other big-endian */
|
|
#define readw_l2b readw
|
|
#define readl_l2b readl
|
|
#define writew_b2l writew
|
|
#define writel_b2l writel
|
|
#define readw_raw readw
|
|
#define readl_raw readl
|
|
#define writew_raw writew
|
|
#define writel_raw writel
|
|
#endif
|
|
|
|
#else /* little endian */
|
|
|
|
#define inw_raw inw
|
|
#define inl_raw inl
|
|
#define outw_raw outw
|
|
#define outl_raw outl
|
|
|
|
#define readb_raw readb
|
|
#define readw_raw readw
|
|
#define readl_raw readl
|
|
#define writeb_raw writeb
|
|
#define writew_raw writew
|
|
#define writel_raw writel
|
|
|
|
#endif
|
|
|
|
#if !defined(__hppa__) && !defined(__mips__)
|
|
#ifdef SCSI_NCR_BIG_ENDIAN
|
|
#error "The NCR in BIG ENDIAN addressing mode is not (yet) supported"
|
|
#endif
|
|
#endif
|
|
|
|
#define MEMORY_BARRIER() mb()
|
|
|
|
|
|
/*
|
|
* If the NCR uses big endian addressing mode over the
|
|
* PCI, actual io register addresses for byte and word
|
|
* accesses must be changed according to lane routing.
|
|
* Btw, ncr_offb() and ncr_offw() macros only apply to
|
|
* constants and so donnot generate bloated code.
|
|
*/
|
|
|
|
#if defined(SCSI_NCR_BIG_ENDIAN)
|
|
|
|
#define ncr_offb(o) (((o)&~3)+((~((o)&3))&3))
|
|
#define ncr_offw(o) (((o)&~3)+((~((o)&3))&2))
|
|
|
|
#else
|
|
|
|
#define ncr_offb(o) (o)
|
|
#define ncr_offw(o) (o)
|
|
|
|
#endif
|
|
|
|
/*
|
|
* If the CPU and the NCR use same endian-ness addressing,
|
|
* no byte reordering is needed for script patching.
|
|
* Macro cpu_to_scr() is to be used for script patching.
|
|
* Macro scr_to_cpu() is to be used for getting a DWORD
|
|
* from the script.
|
|
*/
|
|
|
|
#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
|
|
|
|
#define cpu_to_scr(dw) cpu_to_le32(dw)
|
|
#define scr_to_cpu(dw) le32_to_cpu(dw)
|
|
|
|
#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
|
|
|
|
#define cpu_to_scr(dw) cpu_to_be32(dw)
|
|
#define scr_to_cpu(dw) be32_to_cpu(dw)
|
|
|
|
#else
|
|
|
|
#define cpu_to_scr(dw) (dw)
|
|
#define scr_to_cpu(dw) (dw)
|
|
|
|
#endif
|
|
|
|
/*
|
|
* Access to the controller chip.
|
|
*
|
|
* If the CPU and the NCR use same endian-ness addressing,
|
|
* no byte reordering is needed for accessing chip io
|
|
* registers. Functions suffixed by '_raw' are assumed
|
|
* to access the chip over the PCI without doing byte
|
|
* reordering. Functions suffixed by '_l2b' are
|
|
* assumed to perform little-endian to big-endian byte
|
|
* reordering, those suffixed by '_b2l' blah, blah,
|
|
* blah, ...
|
|
*/
|
|
|
|
/*
|
|
* MEMORY mapped IO input / output
|
|
*/
|
|
|
|
#define INB_OFF(o) readb_raw((char __iomem *)np->reg + ncr_offb(o))
|
|
#define OUTB_OFF(o, val) writeb_raw((val), (char __iomem *)np->reg + ncr_offb(o))
|
|
|
|
#if defined(__BIG_ENDIAN) && !defined(SCSI_NCR_BIG_ENDIAN)
|
|
|
|
#define INW_OFF(o) readw_l2b((char __iomem *)np->reg + ncr_offw(o))
|
|
#define INL_OFF(o) readl_l2b((char __iomem *)np->reg + (o))
|
|
|
|
#define OUTW_OFF(o, val) writew_b2l((val), (char __iomem *)np->reg + ncr_offw(o))
|
|
#define OUTL_OFF(o, val) writel_b2l((val), (char __iomem *)np->reg + (o))
|
|
|
|
#elif defined(__LITTLE_ENDIAN) && defined(SCSI_NCR_BIG_ENDIAN)
|
|
|
|
#define INW_OFF(o) readw_b2l((char __iomem *)np->reg + ncr_offw(o))
|
|
#define INL_OFF(o) readl_b2l((char __iomem *)np->reg + (o))
|
|
|
|
#define OUTW_OFF(o, val) writew_l2b((val), (char __iomem *)np->reg + ncr_offw(o))
|
|
#define OUTL_OFF(o, val) writel_l2b((val), (char __iomem *)np->reg + (o))
|
|
|
|
#else
|
|
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
|
|
/* Only 8 or 32 bit transfers allowed */
|
|
#define INW_OFF(o) (readb((char __iomem *)np->reg + ncr_offw(o)) << 8 | readb((char __iomem *)np->reg + ncr_offw(o) + 1))
|
|
#else
|
|
#define INW_OFF(o) readw_raw((char __iomem *)np->reg + ncr_offw(o))
|
|
#endif
|
|
#define INL_OFF(o) readl_raw((char __iomem *)np->reg + (o))
|
|
|
|
#ifdef CONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
|
|
/* Only 8 or 32 bit transfers allowed */
|
|
#define OUTW_OFF(o, val) do { writeb((char)((val) >> 8), (char __iomem *)np->reg + ncr_offw(o)); writeb((char)(val), (char __iomem *)np->reg + ncr_offw(o) + 1); } while (0)
|
|
#else
|
|
#define OUTW_OFF(o, val) writew_raw((val), (char __iomem *)np->reg + ncr_offw(o))
|
|
#endif
|
|
#define OUTL_OFF(o, val) writel_raw((val), (char __iomem *)np->reg + (o))
|
|
|
|
#endif
|
|
|
|
#define INB(r) INB_OFF (offsetof(struct ncr_reg,r))
|
|
#define INW(r) INW_OFF (offsetof(struct ncr_reg,r))
|
|
#define INL(r) INL_OFF (offsetof(struct ncr_reg,r))
|
|
|
|
#define OUTB(r, val) OUTB_OFF (offsetof(struct ncr_reg,r), (val))
|
|
#define OUTW(r, val) OUTW_OFF (offsetof(struct ncr_reg,r), (val))
|
|
#define OUTL(r, val) OUTL_OFF (offsetof(struct ncr_reg,r), (val))
|
|
|
|
/*
|
|
* Set bit field ON, OFF
|
|
*/
|
|
|
|
#define OUTONB(r, m) OUTB(r, INB(r) | (m))
|
|
#define OUTOFFB(r, m) OUTB(r, INB(r) & ~(m))
|
|
#define OUTONW(r, m) OUTW(r, INW(r) | (m))
|
|
#define OUTOFFW(r, m) OUTW(r, INW(r) & ~(m))
|
|
#define OUTONL(r, m) OUTL(r, INL(r) | (m))
|
|
#define OUTOFFL(r, m) OUTL(r, INL(r) & ~(m))
|
|
|
|
/*
|
|
* We normally want the chip to have a consistent view
|
|
* of driver internal data structures when we restart it.
|
|
* Thus these macros.
|
|
*/
|
|
#define OUTL_DSP(v) \
|
|
do { \
|
|
MEMORY_BARRIER(); \
|
|
OUTL (nc_dsp, (v)); \
|
|
} while (0)
|
|
|
|
#define OUTONB_STD() \
|
|
do { \
|
|
MEMORY_BARRIER(); \
|
|
OUTONB (nc_dcntl, (STD|NOCOM)); \
|
|
} while (0)
|
|
|
|
|
|
/*
|
|
** NCR53C8XX devices features table.
|
|
*/
|
|
struct ncr_chip {
|
|
unsigned short revision_id;
|
|
unsigned char burst_max; /* log-base-2 of max burst */
|
|
unsigned char offset_max;
|
|
unsigned char nr_divisor;
|
|
unsigned int features;
|
|
#define FE_LED0 (1<<0)
|
|
#define FE_WIDE (1<<1) /* Wide data transfers */
|
|
#define FE_ULTRA (1<<2) /* Ultra speed 20Mtrans/sec */
|
|
#define FE_DBLR (1<<4) /* Clock doubler present */
|
|
#define FE_QUAD (1<<5) /* Clock quadrupler present */
|
|
#define FE_ERL (1<<6) /* Enable read line */
|
|
#define FE_CLSE (1<<7) /* Cache line size enable */
|
|
#define FE_WRIE (1<<8) /* Write & Invalidate enable */
|
|
#define FE_ERMP (1<<9) /* Enable read multiple */
|
|
#define FE_BOF (1<<10) /* Burst opcode fetch */
|
|
#define FE_DFS (1<<11) /* DMA fifo size */
|
|
#define FE_PFEN (1<<12) /* Prefetch enable */
|
|
#define FE_LDSTR (1<<13) /* Load/Store supported */
|
|
#define FE_RAM (1<<14) /* On chip RAM present */
|
|
#define FE_VARCLK (1<<15) /* SCSI clock may vary */
|
|
#define FE_RAM8K (1<<16) /* On chip RAM sized 8Kb */
|
|
#define FE_64BIT (1<<17) /* Have a 64-bit PCI interface */
|
|
#define FE_IO256 (1<<18) /* Requires full 256 bytes in PCI space */
|
|
#define FE_NOPM (1<<19) /* Scripts handles phase mismatch */
|
|
#define FE_LEDC (1<<20) /* Hardware control of LED */
|
|
#define FE_DIFF (1<<21) /* Support Differential SCSI */
|
|
#define FE_66MHZ (1<<23) /* 66MHz PCI Support */
|
|
#define FE_DAC (1<<24) /* Support DAC cycles (64 bit addressing) */
|
|
#define FE_ISTAT1 (1<<25) /* Have ISTAT1, MBOX0, MBOX1 registers */
|
|
#define FE_DAC_IN_USE (1<<26) /* Platform does DAC cycles */
|
|
#define FE_EHP (1<<27) /* 720: Even host parity */
|
|
#define FE_MUX (1<<28) /* 720: Multiplexed bus */
|
|
#define FE_EA (1<<29) /* 720: Enable Ack */
|
|
|
|
#define FE_CACHE_SET (FE_ERL|FE_CLSE|FE_WRIE|FE_ERMP)
|
|
#define FE_SCSI_SET (FE_WIDE|FE_ULTRA|FE_DBLR|FE_QUAD|F_CLK80)
|
|
#define FE_SPECIAL_SET (FE_CACHE_SET|FE_BOF|FE_DFS|FE_LDSTR|FE_PFEN|FE_RAM)
|
|
};
|
|
|
|
|
|
/*
|
|
** Driver setup structure.
|
|
**
|
|
** This structure is initialized from linux config options.
|
|
** It can be overridden at boot-up by the boot command line.
|
|
*/
|
|
#define SCSI_NCR_MAX_EXCLUDES 8
|
|
struct ncr_driver_setup {
|
|
u8 master_parity;
|
|
u8 scsi_parity;
|
|
u8 disconnection;
|
|
u8 special_features;
|
|
u8 force_sync_nego;
|
|
u8 reverse_probe;
|
|
u8 pci_fix_up;
|
|
u8 use_nvram;
|
|
u8 verbose;
|
|
u8 default_tags;
|
|
u16 default_sync;
|
|
u16 debug;
|
|
u8 burst_max;
|
|
u8 led_pin;
|
|
u8 max_wide;
|
|
u8 settle_delay;
|
|
u8 diff_support;
|
|
u8 irqm;
|
|
u8 bus_check;
|
|
u8 optimize;
|
|
u8 recovery;
|
|
u8 host_id;
|
|
u16 iarb;
|
|
u32 excludes[SCSI_NCR_MAX_EXCLUDES];
|
|
char tag_ctrl[100];
|
|
};
|
|
|
|
/*
|
|
** Initial setup.
|
|
** Can be overridden at startup by a command line.
|
|
*/
|
|
#define SCSI_NCR_DRIVER_SETUP \
|
|
{ \
|
|
SCSI_NCR_SETUP_MASTER_PARITY, \
|
|
SCSI_NCR_SETUP_SCSI_PARITY, \
|
|
SCSI_NCR_SETUP_DISCONNECTION, \
|
|
SCSI_NCR_SETUP_SPECIAL_FEATURES, \
|
|
SCSI_NCR_SETUP_FORCE_SYNC_NEGO, \
|
|
0, \
|
|
0, \
|
|
1, \
|
|
0, \
|
|
SCSI_NCR_SETUP_DEFAULT_TAGS, \
|
|
SCSI_NCR_SETUP_DEFAULT_SYNC, \
|
|
0x00, \
|
|
7, \
|
|
0, \
|
|
1, \
|
|
SCSI_NCR_SETUP_SETTLE_TIME, \
|
|
0, \
|
|
0, \
|
|
1, \
|
|
0, \
|
|
0, \
|
|
255, \
|
|
0x00 \
|
|
}
|
|
|
|
/*
|
|
** Boot fail safe setup.
|
|
** Override initial setup from boot command line:
|
|
** ncr53c8xx=safe:y
|
|
*/
|
|
#define SCSI_NCR_DRIVER_SAFE_SETUP \
|
|
{ \
|
|
0, \
|
|
1, \
|
|
0, \
|
|
0, \
|
|
0, \
|
|
0, \
|
|
0, \
|
|
1, \
|
|
2, \
|
|
0, \
|
|
255, \
|
|
0x00, \
|
|
255, \
|
|
0, \
|
|
0, \
|
|
10, \
|
|
1, \
|
|
1, \
|
|
1, \
|
|
0, \
|
|
0, \
|
|
255 \
|
|
}
|
|
|
|
/**************** ORIGINAL CONTENT of ncrreg.h from FreeBSD ******************/
|
|
|
|
/*-----------------------------------------------------------------
|
|
**
|
|
** The ncr 53c810 register structure.
|
|
**
|
|
**-----------------------------------------------------------------
|
|
*/
|
|
|
|
struct ncr_reg {
|
|
/*00*/ u8 nc_scntl0; /* full arb., ena parity, par->ATN */
|
|
|
|
/*01*/ u8 nc_scntl1; /* no reset */
|
|
#define ISCON 0x10 /* connected to scsi */
|
|
#define CRST 0x08 /* force reset */
|
|
#define IARB 0x02 /* immediate arbitration */
|
|
|
|
/*02*/ u8 nc_scntl2; /* no disconnect expected */
|
|
#define SDU 0x80 /* cmd: disconnect will raise error */
|
|
#define CHM 0x40 /* sta: chained mode */
|
|
#define WSS 0x08 /* sta: wide scsi send [W]*/
|
|
#define WSR 0x01 /* sta: wide scsi received [W]*/
|
|
|
|
/*03*/ u8 nc_scntl3; /* cnf system clock dependent */
|
|
#define EWS 0x08 /* cmd: enable wide scsi [W]*/
|
|
#define ULTRA 0x80 /* cmd: ULTRA enable */
|
|
/* bits 0-2, 7 rsvd for C1010 */
|
|
|
|
/*04*/ u8 nc_scid; /* cnf host adapter scsi address */
|
|
#define RRE 0x40 /* r/w:e enable response to resel. */
|
|
#define SRE 0x20 /* r/w:e enable response to select */
|
|
|
|
/*05*/ u8 nc_sxfer; /* ### Sync speed and count */
|
|
/* bits 6-7 rsvd for C1010 */
|
|
|
|
/*06*/ u8 nc_sdid; /* ### Destination-ID */
|
|
|
|
/*07*/ u8 nc_gpreg; /* ??? IO-Pins */
|
|
|
|
/*08*/ u8 nc_sfbr; /* ### First byte in phase */
|
|
|
|
/*09*/ u8 nc_socl;
|
|
#define CREQ 0x80 /* r/w: SCSI-REQ */
|
|
#define CACK 0x40 /* r/w: SCSI-ACK */
|
|
#define CBSY 0x20 /* r/w: SCSI-BSY */
|
|
#define CSEL 0x10 /* r/w: SCSI-SEL */
|
|
#define CATN 0x08 /* r/w: SCSI-ATN */
|
|
#define CMSG 0x04 /* r/w: SCSI-MSG */
|
|
#define CC_D 0x02 /* r/w: SCSI-C_D */
|
|
#define CI_O 0x01 /* r/w: SCSI-I_O */
|
|
|
|
/*0a*/ u8 nc_ssid;
|
|
|
|
/*0b*/ u8 nc_sbcl;
|
|
|
|
/*0c*/ u8 nc_dstat;
|
|
#define DFE 0x80 /* sta: dma fifo empty */
|
|
#define MDPE 0x40 /* int: master data parity error */
|
|
#define BF 0x20 /* int: script: bus fault */
|
|
#define ABRT 0x10 /* int: script: command aborted */
|
|
#define SSI 0x08 /* int: script: single step */
|
|
#define SIR 0x04 /* int: script: interrupt instruct. */
|
|
#define IID 0x01 /* int: script: illegal instruct. */
|
|
|
|
/*0d*/ u8 nc_sstat0;
|
|
#define ILF 0x80 /* sta: data in SIDL register lsb */
|
|
#define ORF 0x40 /* sta: data in SODR register lsb */
|
|
#define OLF 0x20 /* sta: data in SODL register lsb */
|
|
#define AIP 0x10 /* sta: arbitration in progress */
|
|
#define LOA 0x08 /* sta: arbitration lost */
|
|
#define WOA 0x04 /* sta: arbitration won */
|
|
#define IRST 0x02 /* sta: scsi reset signal */
|
|
#define SDP 0x01 /* sta: scsi parity signal */
|
|
|
|
/*0e*/ u8 nc_sstat1;
|
|
#define FF3210 0xf0 /* sta: bytes in the scsi fifo */
|
|
|
|
/*0f*/ u8 nc_sstat2;
|
|
#define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
|
|
#define ORF1 0x40 /* sta: data in SODR register msb[W]*/
|
|
#define OLF1 0x20 /* sta: data in SODL register msb[W]*/
|
|
#define DM 0x04 /* sta: DIFFSENS mismatch (895/6 only) */
|
|
#define LDSC 0x02 /* sta: disconnect & reconnect */
|
|
|
|
/*10*/ u8 nc_dsa; /* --> Base page */
|
|
/*11*/ u8 nc_dsa1;
|
|
/*12*/ u8 nc_dsa2;
|
|
/*13*/ u8 nc_dsa3;
|
|
|
|
/*14*/ u8 nc_istat; /* --> Main Command and status */
|
|
#define CABRT 0x80 /* cmd: abort current operation */
|
|
#define SRST 0x40 /* mod: reset chip */
|
|
#define SIGP 0x20 /* r/w: message from host to ncr */
|
|
#define SEM 0x10 /* r/w: message between host + ncr */
|
|
#define CON 0x08 /* sta: connected to scsi */
|
|
#define INTF 0x04 /* sta: int on the fly (reset by wr)*/
|
|
#define SIP 0x02 /* sta: scsi-interrupt */
|
|
#define DIP 0x01 /* sta: host/script interrupt */
|
|
|
|
/*15*/ u8 nc_istat1; /* 896 and later cores only */
|
|
#define FLSH 0x04 /* sta: chip is flushing */
|
|
#define SRUN 0x02 /* sta: scripts are running */
|
|
#define SIRQD 0x01 /* r/w: disable INT pin */
|
|
|
|
/*16*/ u8 nc_mbox0; /* 896 and later cores only */
|
|
/*17*/ u8 nc_mbox1; /* 896 and later cores only */
|
|
|
|
/*18*/ u8 nc_ctest0;
|
|
#define EHP 0x04 /* 720 even host parity */
|
|
/*19*/ u8 nc_ctest1;
|
|
|
|
/*1a*/ u8 nc_ctest2;
|
|
#define CSIGP 0x40
|
|
/* bits 0-2,7 rsvd for C1010 */
|
|
|
|
/*1b*/ u8 nc_ctest3;
|
|
#define FLF 0x08 /* cmd: flush dma fifo */
|
|
#define CLF 0x04 /* cmd: clear dma fifo */
|
|
#define FM 0x02 /* mod: fetch pin mode */
|
|
#define WRIE 0x01 /* mod: write and invalidate enable */
|
|
/* bits 4-7 rsvd for C1010 */
|
|
|
|
/*1c*/ u32 nc_temp; /* ### Temporary stack */
|
|
|
|
/*20*/ u8 nc_dfifo;
|
|
/*21*/ u8 nc_ctest4;
|
|
#define MUX 0x80 /* 720 host bus multiplex mode */
|
|
#define BDIS 0x80 /* mod: burst disable */
|
|
#define MPEE 0x08 /* mod: master parity error enable */
|
|
|
|
/*22*/ u8 nc_ctest5;
|
|
#define DFS 0x20 /* mod: dma fifo size */
|
|
/* bits 0-1, 3-7 rsvd for C1010 */
|
|
/*23*/ u8 nc_ctest6;
|
|
|
|
/*24*/ u32 nc_dbc; /* ### Byte count and command */
|
|
/*28*/ u32 nc_dnad; /* ### Next command register */
|
|
/*2c*/ u32 nc_dsp; /* --> Script Pointer */
|
|
/*30*/ u32 nc_dsps; /* --> Script pointer save/opcode#2 */
|
|
|
|
/*34*/ u8 nc_scratcha; /* Temporary register a */
|
|
/*35*/ u8 nc_scratcha1;
|
|
/*36*/ u8 nc_scratcha2;
|
|
/*37*/ u8 nc_scratcha3;
|
|
|
|
/*38*/ u8 nc_dmode;
|
|
#define BL_2 0x80 /* mod: burst length shift value +2 */
|
|
#define BL_1 0x40 /* mod: burst length shift value +1 */
|
|
#define ERL 0x08 /* mod: enable read line */
|
|
#define ERMP 0x04 /* mod: enable read multiple */
|
|
#define BOF 0x02 /* mod: burst op code fetch */
|
|
|
|
/*39*/ u8 nc_dien;
|
|
/*3a*/ u8 nc_sbr;
|
|
|
|
/*3b*/ u8 nc_dcntl; /* --> Script execution control */
|
|
#define CLSE 0x80 /* mod: cache line size enable */
|
|
#define PFF 0x40 /* cmd: pre-fetch flush */
|
|
#define PFEN 0x20 /* mod: pre-fetch enable */
|
|
#define EA 0x20 /* mod: 720 enable-ack */
|
|
#define SSM 0x10 /* mod: single step mode */
|
|
#define IRQM 0x08 /* mod: irq mode (1 = totem pole !) */
|
|
#define STD 0x04 /* cmd: start dma mode */
|
|
#define IRQD 0x02 /* mod: irq disable */
|
|
#define NOCOM 0x01 /* cmd: protect sfbr while reselect */
|
|
/* bits 0-1 rsvd for C1010 */
|
|
|
|
/*3c*/ u32 nc_adder;
|
|
|
|
/*40*/ u16 nc_sien; /* -->: interrupt enable */
|
|
/*42*/ u16 nc_sist; /* <--: interrupt status */
|
|
#define SBMC 0x1000/* sta: SCSI Bus Mode Change (895/6 only) */
|
|
#define STO 0x0400/* sta: timeout (select) */
|
|
#define GEN 0x0200/* sta: timeout (general) */
|
|
#define HTH 0x0100/* sta: timeout (handshake) */
|
|
#define MA 0x80 /* sta: phase mismatch */
|
|
#define CMP 0x40 /* sta: arbitration complete */
|
|
#define SEL 0x20 /* sta: selected by another device */
|
|
#define RSL 0x10 /* sta: reselected by another device*/
|
|
#define SGE 0x08 /* sta: gross error (over/underflow)*/
|
|
#define UDC 0x04 /* sta: unexpected disconnect */
|
|
#define RST 0x02 /* sta: scsi bus reset detected */
|
|
#define PAR 0x01 /* sta: scsi parity error */
|
|
|
|
/*44*/ u8 nc_slpar;
|
|
/*45*/ u8 nc_swide;
|
|
/*46*/ u8 nc_macntl;
|
|
/*47*/ u8 nc_gpcntl;
|
|
/*48*/ u8 nc_stime0; /* cmd: timeout for select&handshake*/
|
|
/*49*/ u8 nc_stime1; /* cmd: timeout user defined */
|
|
/*4a*/ u16 nc_respid; /* sta: Reselect-IDs */
|
|
|
|
/*4c*/ u8 nc_stest0;
|
|
|
|
/*4d*/ u8 nc_stest1;
|
|
#define SCLK 0x80 /* Use the PCI clock as SCSI clock */
|
|
#define DBLEN 0x08 /* clock doubler running */
|
|
#define DBLSEL 0x04 /* clock doubler selected */
|
|
|
|
|
|
/*4e*/ u8 nc_stest2;
|
|
#define ROF 0x40 /* reset scsi offset (after gross error!) */
|
|
#define DIF 0x20 /* 720 SCSI differential mode */
|
|
#define EXT 0x02 /* extended filtering */
|
|
|
|
/*4f*/ u8 nc_stest3;
|
|
#define TE 0x80 /* c: tolerAnt enable */
|
|
#define HSC 0x20 /* c: Halt SCSI Clock */
|
|
#define CSF 0x02 /* c: clear scsi fifo */
|
|
|
|
/*50*/ u16 nc_sidl; /* Lowlevel: latched from scsi data */
|
|
/*52*/ u8 nc_stest4;
|
|
#define SMODE 0xc0 /* SCSI bus mode (895/6 only) */
|
|
#define SMODE_HVD 0x40 /* High Voltage Differential */
|
|
#define SMODE_SE 0x80 /* Single Ended */
|
|
#define SMODE_LVD 0xc0 /* Low Voltage Differential */
|
|
#define LCKFRQ 0x20 /* Frequency Lock (895/6 only) */
|
|
/* bits 0-5 rsvd for C1010 */
|
|
|
|
/*53*/ u8 nc_53_;
|
|
/*54*/ u16 nc_sodl; /* Lowlevel: data out to scsi data */
|
|
/*56*/ u8 nc_ccntl0; /* Chip Control 0 (896) */
|
|
#define ENPMJ 0x80 /* Enable Phase Mismatch Jump */
|
|
#define PMJCTL 0x40 /* Phase Mismatch Jump Control */
|
|
#define ENNDJ 0x20 /* Enable Non Data PM Jump */
|
|
#define DISFC 0x10 /* Disable Auto FIFO Clear */
|
|
#define DILS 0x02 /* Disable Internal Load/Store */
|
|
#define DPR 0x01 /* Disable Pipe Req */
|
|
|
|
/*57*/ u8 nc_ccntl1; /* Chip Control 1 (896) */
|
|
#define ZMOD 0x80 /* High Impedance Mode */
|
|
#define DIC 0x10 /* Disable Internal Cycles */
|
|
#define DDAC 0x08 /* Disable Dual Address Cycle */
|
|
#define XTIMOD 0x04 /* 64-bit Table Ind. Indexing Mode */
|
|
#define EXTIBMV 0x02 /* Enable 64-bit Table Ind. BMOV */
|
|
#define EXDBMV 0x01 /* Enable 64-bit Direct BMOV */
|
|
|
|
/*58*/ u16 nc_sbdl; /* Lowlevel: data from scsi data */
|
|
/*5a*/ u16 nc_5a_;
|
|
|
|
/*5c*/ u8 nc_scr0; /* Working register B */
|
|
/*5d*/ u8 nc_scr1; /* */
|
|
/*5e*/ u8 nc_scr2; /* */
|
|
/*5f*/ u8 nc_scr3; /* */
|
|
|
|
/*60*/ u8 nc_scrx[64]; /* Working register C-R */
|
|
/*a0*/ u32 nc_mmrs; /* Memory Move Read Selector */
|
|
/*a4*/ u32 nc_mmws; /* Memory Move Write Selector */
|
|
/*a8*/ u32 nc_sfs; /* Script Fetch Selector */
|
|
/*ac*/ u32 nc_drs; /* DSA Relative Selector */
|
|
/*b0*/ u32 nc_sbms; /* Static Block Move Selector */
|
|
/*b4*/ u32 nc_dbms; /* Dynamic Block Move Selector */
|
|
/*b8*/ u32 nc_dnad64; /* DMA Next Address 64 */
|
|
/*bc*/ u16 nc_scntl4; /* C1010 only */
|
|
#define U3EN 0x80 /* Enable Ultra 3 */
|
|
#define AIPEN 0x40 /* Allow check upper byte lanes */
|
|
#define XCLKH_DT 0x08 /* Extra clock of data hold on DT
|
|
transfer edge */
|
|
#define XCLKH_ST 0x04 /* Extra clock of data hold on ST
|
|
transfer edge */
|
|
|
|
/*be*/ u8 nc_aipcntl0; /* Epat Control 1 C1010 only */
|
|
/*bf*/ u8 nc_aipcntl1; /* AIP Control C1010_66 Only */
|
|
|
|
/*c0*/ u32 nc_pmjad1; /* Phase Mismatch Jump Address 1 */
|
|
/*c4*/ u32 nc_pmjad2; /* Phase Mismatch Jump Address 2 */
|
|
/*c8*/ u8 nc_rbc; /* Remaining Byte Count */
|
|
/*c9*/ u8 nc_rbc1; /* */
|
|
/*ca*/ u8 nc_rbc2; /* */
|
|
/*cb*/ u8 nc_rbc3; /* */
|
|
|
|
/*cc*/ u8 nc_ua; /* Updated Address */
|
|
/*cd*/ u8 nc_ua1; /* */
|
|
/*ce*/ u8 nc_ua2; /* */
|
|
/*cf*/ u8 nc_ua3; /* */
|
|
/*d0*/ u32 nc_esa; /* Entry Storage Address */
|
|
/*d4*/ u8 nc_ia; /* Instruction Address */
|
|
/*d5*/ u8 nc_ia1;
|
|
/*d6*/ u8 nc_ia2;
|
|
/*d7*/ u8 nc_ia3;
|
|
/*d8*/ u32 nc_sbc; /* SCSI Byte Count (3 bytes only) */
|
|
/*dc*/ u32 nc_csbc; /* Cumulative SCSI Byte Count */
|
|
|
|
/* Following for C1010 only */
|
|
/*e0*/ u16 nc_crcpad; /* CRC Value */
|
|
/*e2*/ u8 nc_crccntl0; /* CRC control register */
|
|
#define SNDCRC 0x10 /* Send CRC Request */
|
|
/*e3*/ u8 nc_crccntl1; /* CRC control register */
|
|
/*e4*/ u32 nc_crcdata; /* CRC data register */
|
|
/*e8*/ u32 nc_e8_; /* rsvd */
|
|
/*ec*/ u32 nc_ec_; /* rsvd */
|
|
/*f0*/ u16 nc_dfbc; /* DMA FIFO byte count */
|
|
|
|
};
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Utility macros for the script.
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
|
|
#define REG(r) REGJ (nc_, r)
|
|
|
|
typedef u32 ncrcmd;
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** SCSI phases
|
|
**
|
|
** DT phases illegal for ncr driver.
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_DATA_OUT 0x00000000
|
|
#define SCR_DATA_IN 0x01000000
|
|
#define SCR_COMMAND 0x02000000
|
|
#define SCR_STATUS 0x03000000
|
|
#define SCR_DT_DATA_OUT 0x04000000
|
|
#define SCR_DT_DATA_IN 0x05000000
|
|
#define SCR_MSG_OUT 0x06000000
|
|
#define SCR_MSG_IN 0x07000000
|
|
|
|
#define SCR_ILG_OUT 0x04000000
|
|
#define SCR_ILG_IN 0x05000000
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Data transfer via SCSI.
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** MOVE_ABS (LEN)
|
|
** <<start address>>
|
|
**
|
|
** MOVE_IND (LEN)
|
|
** <<dnad_offset>>
|
|
**
|
|
** MOVE_TBL
|
|
** <<dnad_offset>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define OPC_MOVE 0x08000000
|
|
|
|
#define SCR_MOVE_ABS(l) ((0x00000000 | OPC_MOVE) | (l))
|
|
#define SCR_MOVE_IND(l) ((0x20000000 | OPC_MOVE) | (l))
|
|
#define SCR_MOVE_TBL (0x10000000 | OPC_MOVE)
|
|
|
|
#define SCR_CHMOV_ABS(l) ((0x00000000) | (l))
|
|
#define SCR_CHMOV_IND(l) ((0x20000000) | (l))
|
|
#define SCR_CHMOV_TBL (0x10000000)
|
|
|
|
struct scr_tblmove {
|
|
u32 size;
|
|
u32 addr;
|
|
};
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Selection
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** SEL_ABS | SCR_ID (0..15) [ | REL_JMP]
|
|
** <<alternate_address>>
|
|
**
|
|
** SEL_TBL | << dnad_offset>> [ | REL_JMP]
|
|
** <<alternate_address>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_SEL_ABS 0x40000000
|
|
#define SCR_SEL_ABS_ATN 0x41000000
|
|
#define SCR_SEL_TBL 0x42000000
|
|
#define SCR_SEL_TBL_ATN 0x43000000
|
|
|
|
|
|
#ifdef SCSI_NCR_BIG_ENDIAN
|
|
struct scr_tblsel {
|
|
u8 sel_scntl3;
|
|
u8 sel_id;
|
|
u8 sel_sxfer;
|
|
u8 sel_scntl4;
|
|
};
|
|
#else
|
|
struct scr_tblsel {
|
|
u8 sel_scntl4;
|
|
u8 sel_sxfer;
|
|
u8 sel_id;
|
|
u8 sel_scntl3;
|
|
};
|
|
#endif
|
|
|
|
#define SCR_JMP_REL 0x04000000
|
|
#define SCR_ID(id) (((u32)(id)) << 16)
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Waiting for Disconnect or Reselect
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** WAIT_DISC
|
|
** dummy: <<alternate_address>>
|
|
**
|
|
** WAIT_RESEL
|
|
** <<alternate_address>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_WAIT_DISC 0x48000000
|
|
#define SCR_WAIT_RESEL 0x50000000
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Bit Set / Reset
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** SET (flags {|.. })
|
|
**
|
|
** CLR (flags {|.. })
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_SET(f) (0x58000000 | (f))
|
|
#define SCR_CLR(f) (0x60000000 | (f))
|
|
|
|
#define SCR_CARRY 0x00000400
|
|
#define SCR_TRG 0x00000200
|
|
#define SCR_ACK 0x00000040
|
|
#define SCR_ATN 0x00000008
|
|
|
|
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Memory to memory move
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** COPY (bytecount)
|
|
** << source_address >>
|
|
** << destination_address >>
|
|
**
|
|
** SCR_COPY sets the NO FLUSH option by default.
|
|
** SCR_COPY_F does not set this option.
|
|
**
|
|
** For chips which do not support this option,
|
|
** ncr_copy_and_bind() will remove this bit.
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_NO_FLUSH 0x01000000
|
|
|
|
#define SCR_COPY(n) (0xc0000000 | SCR_NO_FLUSH | (n))
|
|
#define SCR_COPY_F(n) (0xc0000000 | (n))
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Register move and binary operations
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** SFBR_REG (reg, op, data) reg = SFBR op data
|
|
** << 0 >>
|
|
**
|
|
** REG_SFBR (reg, op, data) SFBR = reg op data
|
|
** << 0 >>
|
|
**
|
|
** REG_REG (reg, op, data) reg = reg op data
|
|
** << 0 >>
|
|
**
|
|
**-----------------------------------------------------------
|
|
** On 810A, 860, 825A, 875, 895 and 896 chips the content
|
|
** of SFBR register can be used as data (SCR_SFBR_DATA).
|
|
** The 896 has additional IO registers starting at
|
|
** offset 0x80. Bit 7 of register offset is stored in
|
|
** bit 7 of the SCRIPTS instruction first DWORD.
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_REG_OFS(ofs) ((((ofs) & 0x7f) << 16ul) + ((ofs) & 0x80))
|
|
|
|
#define SCR_SFBR_REG(reg,op,data) \
|
|
(0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
|
|
|
|
#define SCR_REG_SFBR(reg,op,data) \
|
|
(0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
|
|
|
|
#define SCR_REG_REG(reg,op,data) \
|
|
(0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | (((data)&0xff)<<8ul))
|
|
|
|
|
|
#define SCR_LOAD 0x00000000
|
|
#define SCR_SHL 0x01000000
|
|
#define SCR_OR 0x02000000
|
|
#define SCR_XOR 0x03000000
|
|
#define SCR_AND 0x04000000
|
|
#define SCR_SHR 0x05000000
|
|
#define SCR_ADD 0x06000000
|
|
#define SCR_ADDC 0x07000000
|
|
|
|
#define SCR_SFBR_DATA (0x00800000>>8ul) /* Use SFBR as data */
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** FROM_REG (reg) SFBR = reg
|
|
** << 0 >>
|
|
**
|
|
** TO_REG (reg) reg = SFBR
|
|
** << 0 >>
|
|
**
|
|
** LOAD_REG (reg, data) reg = <data>
|
|
** << 0 >>
|
|
**
|
|
** LOAD_SFBR(data) SFBR = <data>
|
|
** << 0 >>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_FROM_REG(reg) \
|
|
SCR_REG_SFBR(reg,SCR_OR,0)
|
|
|
|
#define SCR_TO_REG(reg) \
|
|
SCR_SFBR_REG(reg,SCR_OR,0)
|
|
|
|
#define SCR_LOAD_REG(reg,data) \
|
|
SCR_REG_REG(reg,SCR_LOAD,data)
|
|
|
|
#define SCR_LOAD_SFBR(data) \
|
|
(SCR_REG_SFBR (gpreg, SCR_LOAD, data))
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** LOAD from memory to register.
|
|
** STORE from register to memory.
|
|
**
|
|
** Only supported by 810A, 860, 825A, 875, 895 and 896.
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** LOAD_ABS (LEN)
|
|
** <<start address>>
|
|
**
|
|
** LOAD_REL (LEN) (DSA relative)
|
|
** <<dsa_offset>>
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_REG_OFS2(ofs) (((ofs) & 0xff) << 16ul)
|
|
#define SCR_NO_FLUSH2 0x02000000
|
|
#define SCR_DSA_REL2 0x10000000
|
|
|
|
#define SCR_LOAD_R(reg, how, n) \
|
|
(0xe1000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
|
|
|
|
#define SCR_STORE_R(reg, how, n) \
|
|
(0xe0000000 | how | (SCR_REG_OFS2(REG(reg))) | (n))
|
|
|
|
#define SCR_LOAD_ABS(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2, n)
|
|
#define SCR_LOAD_REL(reg, n) SCR_LOAD_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2, n)
|
|
#define SCR_LOAD_ABS_F(reg, n) SCR_LOAD_R(reg, 0, n)
|
|
#define SCR_LOAD_REL_F(reg, n) SCR_LOAD_R(reg, SCR_DSA_REL2, n)
|
|
|
|
#define SCR_STORE_ABS(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2, n)
|
|
#define SCR_STORE_REL(reg, n) SCR_STORE_R(reg, SCR_NO_FLUSH2|SCR_DSA_REL2,n)
|
|
#define SCR_STORE_ABS_F(reg, n) SCR_STORE_R(reg, 0, n)
|
|
#define SCR_STORE_REL_F(reg, n) SCR_STORE_R(reg, SCR_DSA_REL2, n)
|
|
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** Waiting for Disconnect or Reselect
|
|
**
|
|
**-----------------------------------------------------------
|
|
**
|
|
** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<address>>
|
|
**
|
|
** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<distance>>
|
|
**
|
|
** CALL [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<address>>
|
|
**
|
|
** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<distance>>
|
|
**
|
|
** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<dummy>>
|
|
**
|
|
** INT [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<ident>>
|
|
**
|
|
** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
|
|
** <<ident>>
|
|
**
|
|
** Conditions:
|
|
** WHEN (phase)
|
|
** IF (phase)
|
|
** CARRYSET
|
|
** DATA (data, mask)
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
#define SCR_NO_OP 0x80000000
|
|
#define SCR_JUMP 0x80080000
|
|
#define SCR_JUMP64 0x80480000
|
|
#define SCR_JUMPR 0x80880000
|
|
#define SCR_CALL 0x88080000
|
|
#define SCR_CALLR 0x88880000
|
|
#define SCR_RETURN 0x90080000
|
|
#define SCR_INT 0x98080000
|
|
#define SCR_INT_FLY 0x98180000
|
|
|
|
#define IFFALSE(arg) (0x00080000 | (arg))
|
|
#define IFTRUE(arg) (0x00000000 | (arg))
|
|
|
|
#define WHEN(phase) (0x00030000 | (phase))
|
|
#define IF(phase) (0x00020000 | (phase))
|
|
|
|
#define DATA(D) (0x00040000 | ((D) & 0xff))
|
|
#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
|
|
|
|
#define CARRYSET (0x00200000)
|
|
|
|
/*-----------------------------------------------------------
|
|
**
|
|
** SCSI constants.
|
|
**
|
|
**-----------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
* End of ncrreg from FreeBSD
|
|
*/
|
|
|
|
/*
|
|
Build a scatter/gather entry.
|
|
see sym53c8xx_2/sym_hipd.h for more detailed sym_build_sge()
|
|
implementation ;)
|
|
*/
|
|
|
|
#define ncr_build_sge(np, data, badd, len) \
|
|
do { \
|
|
(data)->addr = cpu_to_scr(badd); \
|
|
(data)->size = cpu_to_scr(len); \
|
|
} while (0)
|
|
|
|
/*==========================================================
|
|
**
|
|
** Structures used by the detection routine to transmit
|
|
** device configuration to the attach function.
|
|
**
|
|
**==========================================================
|
|
*/
|
|
struct ncr_slot {
|
|
u_long base;
|
|
u_long base_2;
|
|
u_long base_c;
|
|
u_long base_2_c;
|
|
void __iomem *base_v;
|
|
void __iomem *base_2_v;
|
|
int irq;
|
|
/* port and reg fields to use INB, OUTB macros */
|
|
volatile struct ncr_reg __iomem *reg;
|
|
};
|
|
|
|
/*==========================================================
|
|
**
|
|
** Structure used by detection routine to save data on
|
|
** each detected board for attach.
|
|
**
|
|
**==========================================================
|
|
*/
|
|
struct ncr_device {
|
|
struct device *dev;
|
|
struct ncr_slot slot;
|
|
struct ncr_chip chip;
|
|
u_char host_id;
|
|
u8 differential;
|
|
};
|
|
|
|
/* To keep track of the dma mapping (sg/single) that has been set */
|
|
struct ncr_cmd_priv {
|
|
int data_mapped;
|
|
int data_mapping;
|
|
};
|
|
|
|
extern struct Scsi_Host *ncr_attach(struct scsi_host_template *tpnt, int unit, struct ncr_device *device);
|
|
extern void ncr53c8xx_release(struct Scsi_Host *host);
|
|
irqreturn_t ncr53c8xx_intr(int irq, void *dev_id);
|
|
extern int ncr53c8xx_init(void);
|
|
extern void ncr53c8xx_exit(void);
|
|
|
|
#endif /* NCR53C8XX_H */
|