Dave Gerlach 2a21f9e6d9 soc: ti: wkup_m3_ipc: Add debug option to halt m3 in suspend ... Add a debugfs option to allow configurable halting of the wkup_m3 during suspend at the last possible point before low power mode entry. This condition can only be resolved through JTAG and advancing beyond the while loop in a8_lp_ds0_handler [1]. Although this hangs the system it forces the system to remain active once it has been entirely configured for low power mode entry, allowing for register inspection through JTAG to help in debugging transition errors. Halt mode can be set using the enable_off_mode entry under wkup_m3_ipc in the debugfs. [1] https://git.ti.com/cgit/processor-firmware/ti-amx3-cm3-pm-firmware/tree/src/pm_services/pm_handlers.c?h=08.02.00.006#n141 Suggested-by: Brad Griffis <bgriffis@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> [dfustini: add link for a8_lp_ds0_handler() in ti-amx3-cm3-pm-firmware] Signed-off-by: Drew Fustini <dfustini@baylibre.com> Signed-off-by: Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20220502033211.1383158-1-dfustini@baylibre.com		2022-05-03 08:02:09 -05:00
..
k3-ringacc.c	soc: ti: k3-ringacc: Use devm_bitmap_zalloc() when applicable	2022-02-02 13:06:21 -06:00
k3-socinfo.c	soc: ti: k3-socinfo: Add AM62x JTAG ID	2022-02-28 05:35:19 -06:00
Kconfig	soc: ti: Kconfig: Drop ARM64 SoC specific configs	2020-11-21 19:22:01 -08:00
knav_dma.c	soc: ti: knav_dma: Use pm_runtime_resume_and_get instead of pm_runtime_get_sync	2022-04-15 15:04:53 -05:00
knav_qmss.h	soc: ti: Replace zero-length array with flexible-array	2020-06-15 23:08:32 -05:00
knav_qmss_acc.c	soc: TI knav_qmss: make symbol 'knav_acc_range_ops' static	2020-07-24 14:47:10 -07:00
knav_qmss_queue.c	soc: ti: knav_qmss_queue: Use IS_ERR instead of IS_ERR_OR_NULL when checking knav_queue_open() result	2022-05-03 08:02:05 -05:00
Makefile	ARM: SoC-related driver updates	2020-10-24 10:39:22 -07:00
omap_prm.c	soc: ti: omap_prm: Use of_device_get_match_data()	2022-04-15 14:31:03 -05:00
pm33xx.c	soc: ti: pm33xx: using pm_runtime_resume_and_get instead of pm_runtime_get_sync	2022-05-03 06:58:10 -05:00
pruss.c	soc: ti: pruss: using pm_runtime_resume_and_get instead of pm_runtime_get_sync	2022-04-11 08:46:09 -05:00
smartreflex.c	soc: ti: smartreflex: Use platform_get_irq_optional() to get the interrupt	2022-02-02 13:11:40 -06:00
ti_sci_inta_msi.c	soc: ti: ti_sci_inta_msi: Remove ti_sci_inta_msi_domain_free_irqs()	2021-12-16 22:22:19 +01:00
ti_sci_pm_domains.c	soc: ti: ti_sci_pm_domains: Check for null return of devm_kcalloc	2022-04-15 14:59:23 -05:00
wkup_m3_ipc.c	soc: ti: wkup_m3_ipc: Add debug option to halt m3 in suspend	2022-05-03 08:02:09 -05:00