mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![Linus Walleij](/assets/img/avatar_default.png)
This switches the ST SSC SPI controller to use GPIO descriptors from the core instead of GPIO numbers. It is already using the core parsing of GPIO numbers so the switch is pretty straight-forward. Cc: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220201012654.562578-1-linus.walleij@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
460 lines
10 KiB
C
460 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2008-2014 STMicroelectronics Limited
|
|
*
|
|
* Author: Angus Clark <Angus.Clark@st.com>
|
|
* Patrice Chotard <patrice.chotard@st.com>
|
|
* Lee Jones <lee.jones@linaro.org>
|
|
*
|
|
* SPI master mode controller driver, used in STMicroelectronics devices.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
|
|
/* SSC registers */
|
|
#define SSC_BRG 0x000
|
|
#define SSC_TBUF 0x004
|
|
#define SSC_RBUF 0x008
|
|
#define SSC_CTL 0x00C
|
|
#define SSC_IEN 0x010
|
|
#define SSC_I2C 0x018
|
|
|
|
/* SSC Control */
|
|
#define SSC_CTL_DATA_WIDTH_9 0x8
|
|
#define SSC_CTL_DATA_WIDTH_MSK 0xf
|
|
#define SSC_CTL_BM 0xf
|
|
#define SSC_CTL_HB BIT(4)
|
|
#define SSC_CTL_PH BIT(5)
|
|
#define SSC_CTL_PO BIT(6)
|
|
#define SSC_CTL_SR BIT(7)
|
|
#define SSC_CTL_MS BIT(8)
|
|
#define SSC_CTL_EN BIT(9)
|
|
#define SSC_CTL_LPB BIT(10)
|
|
#define SSC_CTL_EN_TX_FIFO BIT(11)
|
|
#define SSC_CTL_EN_RX_FIFO BIT(12)
|
|
#define SSC_CTL_EN_CLST_RX BIT(13)
|
|
|
|
/* SSC Interrupt Enable */
|
|
#define SSC_IEN_TEEN BIT(2)
|
|
|
|
#define FIFO_SIZE 8
|
|
|
|
struct spi_st {
|
|
/* SSC SPI Controller */
|
|
void __iomem *base;
|
|
struct clk *clk;
|
|
struct device *dev;
|
|
|
|
/* SSC SPI current transaction */
|
|
const u8 *tx_ptr;
|
|
u8 *rx_ptr;
|
|
u16 bytes_per_word;
|
|
unsigned int words_remaining;
|
|
unsigned int baud;
|
|
struct completion done;
|
|
};
|
|
|
|
/* Load the TX FIFO */
|
|
static void ssc_write_tx_fifo(struct spi_st *spi_st)
|
|
{
|
|
unsigned int count, i;
|
|
uint32_t word = 0;
|
|
|
|
if (spi_st->words_remaining > FIFO_SIZE)
|
|
count = FIFO_SIZE;
|
|
else
|
|
count = spi_st->words_remaining;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
if (spi_st->tx_ptr) {
|
|
if (spi_st->bytes_per_word == 1) {
|
|
word = *spi_st->tx_ptr++;
|
|
} else {
|
|
word = *spi_st->tx_ptr++;
|
|
word = *spi_st->tx_ptr++ | (word << 8);
|
|
}
|
|
}
|
|
writel_relaxed(word, spi_st->base + SSC_TBUF);
|
|
}
|
|
}
|
|
|
|
/* Read the RX FIFO */
|
|
static void ssc_read_rx_fifo(struct spi_st *spi_st)
|
|
{
|
|
unsigned int count, i;
|
|
uint32_t word = 0;
|
|
|
|
if (spi_st->words_remaining > FIFO_SIZE)
|
|
count = FIFO_SIZE;
|
|
else
|
|
count = spi_st->words_remaining;
|
|
|
|
for (i = 0; i < count; i++) {
|
|
word = readl_relaxed(spi_st->base + SSC_RBUF);
|
|
|
|
if (spi_st->rx_ptr) {
|
|
if (spi_st->bytes_per_word == 1) {
|
|
*spi_st->rx_ptr++ = (uint8_t)word;
|
|
} else {
|
|
*spi_st->rx_ptr++ = (word >> 8);
|
|
*spi_st->rx_ptr++ = word & 0xff;
|
|
}
|
|
}
|
|
}
|
|
spi_st->words_remaining -= count;
|
|
}
|
|
|
|
static int spi_st_transfer_one(struct spi_master *master,
|
|
struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct spi_st *spi_st = spi_master_get_devdata(master);
|
|
uint32_t ctl = 0;
|
|
|
|
/* Setup transfer */
|
|
spi_st->tx_ptr = t->tx_buf;
|
|
spi_st->rx_ptr = t->rx_buf;
|
|
|
|
if (spi->bits_per_word > 8) {
|
|
/*
|
|
* Anything greater than 8 bits-per-word requires 2
|
|
* bytes-per-word in the RX/TX buffers
|
|
*/
|
|
spi_st->bytes_per_word = 2;
|
|
spi_st->words_remaining = t->len / 2;
|
|
|
|
} else if (spi->bits_per_word == 8 && !(t->len & 0x1)) {
|
|
/*
|
|
* If transfer is even-length, and 8 bits-per-word, then
|
|
* implement as half-length 16 bits-per-word transfer
|
|
*/
|
|
spi_st->bytes_per_word = 2;
|
|
spi_st->words_remaining = t->len / 2;
|
|
|
|
/* Set SSC_CTL to 16 bits-per-word */
|
|
ctl = readl_relaxed(spi_st->base + SSC_CTL);
|
|
writel_relaxed((ctl | 0xf), spi_st->base + SSC_CTL);
|
|
|
|
readl_relaxed(spi_st->base + SSC_RBUF);
|
|
|
|
} else {
|
|
spi_st->bytes_per_word = 1;
|
|
spi_st->words_remaining = t->len;
|
|
}
|
|
|
|
reinit_completion(&spi_st->done);
|
|
|
|
/* Start transfer by writing to the TX FIFO */
|
|
ssc_write_tx_fifo(spi_st);
|
|
writel_relaxed(SSC_IEN_TEEN, spi_st->base + SSC_IEN);
|
|
|
|
/* Wait for transfer to complete */
|
|
wait_for_completion(&spi_st->done);
|
|
|
|
/* Restore SSC_CTL if necessary */
|
|
if (ctl)
|
|
writel_relaxed(ctl, spi_st->base + SSC_CTL);
|
|
|
|
spi_finalize_current_transfer(spi->master);
|
|
|
|
return t->len;
|
|
}
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_LOOP | SPI_CS_HIGH)
|
|
static int spi_st_setup(struct spi_device *spi)
|
|
{
|
|
struct spi_st *spi_st = spi_master_get_devdata(spi->master);
|
|
u32 spi_st_clk, sscbrg, var;
|
|
u32 hz = spi->max_speed_hz;
|
|
|
|
if (!hz) {
|
|
dev_err(&spi->dev, "max_speed_hz unspecified\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!spi->cs_gpiod) {
|
|
dev_err(&spi->dev, "no valid gpio assigned\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
spi_st_clk = clk_get_rate(spi_st->clk);
|
|
|
|
/* Set SSC_BRF */
|
|
sscbrg = spi_st_clk / (2 * hz);
|
|
if (sscbrg < 0x07 || sscbrg > BIT(16)) {
|
|
dev_err(&spi->dev,
|
|
"baudrate %d outside valid range %d\n", sscbrg, hz);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spi_st->baud = spi_st_clk / (2 * sscbrg);
|
|
if (sscbrg == BIT(16)) /* 16-bit counter wraps */
|
|
sscbrg = 0x0;
|
|
|
|
writel_relaxed(sscbrg, spi_st->base + SSC_BRG);
|
|
|
|
dev_dbg(&spi->dev,
|
|
"setting baudrate:target= %u hz, actual= %u hz, sscbrg= %u\n",
|
|
hz, spi_st->baud, sscbrg);
|
|
|
|
/* Set SSC_CTL and enable SSC */
|
|
var = readl_relaxed(spi_st->base + SSC_CTL);
|
|
var |= SSC_CTL_MS;
|
|
|
|
if (spi->mode & SPI_CPOL)
|
|
var |= SSC_CTL_PO;
|
|
else
|
|
var &= ~SSC_CTL_PO;
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
var |= SSC_CTL_PH;
|
|
else
|
|
var &= ~SSC_CTL_PH;
|
|
|
|
if ((spi->mode & SPI_LSB_FIRST) == 0)
|
|
var |= SSC_CTL_HB;
|
|
else
|
|
var &= ~SSC_CTL_HB;
|
|
|
|
if (spi->mode & SPI_LOOP)
|
|
var |= SSC_CTL_LPB;
|
|
else
|
|
var &= ~SSC_CTL_LPB;
|
|
|
|
var &= ~SSC_CTL_DATA_WIDTH_MSK;
|
|
var |= (spi->bits_per_word - 1);
|
|
|
|
var |= SSC_CTL_EN_TX_FIFO | SSC_CTL_EN_RX_FIFO;
|
|
var |= SSC_CTL_EN;
|
|
|
|
writel_relaxed(var, spi_st->base + SSC_CTL);
|
|
|
|
/* Clear the status register */
|
|
readl_relaxed(spi_st->base + SSC_RBUF);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Interrupt fired when TX shift register becomes empty */
|
|
static irqreturn_t spi_st_irq(int irq, void *dev_id)
|
|
{
|
|
struct spi_st *spi_st = (struct spi_st *)dev_id;
|
|
|
|
/* Read RX FIFO */
|
|
ssc_read_rx_fifo(spi_st);
|
|
|
|
/* Fill TX FIFO */
|
|
if (spi_st->words_remaining) {
|
|
ssc_write_tx_fifo(spi_st);
|
|
} else {
|
|
/* TX/RX complete */
|
|
writel_relaxed(0x0, spi_st->base + SSC_IEN);
|
|
/*
|
|
* read SSC_IEN to ensure that this bit is set
|
|
* before re-enabling interrupt
|
|
*/
|
|
readl(spi_st->base + SSC_IEN);
|
|
complete(&spi_st->done);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int spi_st_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct spi_master *master;
|
|
struct spi_st *spi_st;
|
|
int irq, ret = 0;
|
|
u32 var;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*spi_st));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
master->dev.of_node = np;
|
|
master->mode_bits = MODEBITS;
|
|
master->setup = spi_st_setup;
|
|
master->transfer_one = spi_st_transfer_one;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
|
|
master->auto_runtime_pm = true;
|
|
master->bus_num = pdev->id;
|
|
master->use_gpio_descriptors = true;
|
|
spi_st = spi_master_get_devdata(master);
|
|
|
|
spi_st->clk = devm_clk_get(&pdev->dev, "ssc");
|
|
if (IS_ERR(spi_st->clk)) {
|
|
dev_err(&pdev->dev, "Unable to request clock\n");
|
|
ret = PTR_ERR(spi_st->clk);
|
|
goto put_master;
|
|
}
|
|
|
|
ret = clk_prepare_enable(spi_st->clk);
|
|
if (ret)
|
|
goto put_master;
|
|
|
|
init_completion(&spi_st->done);
|
|
|
|
/* Get resources */
|
|
spi_st->base = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(spi_st->base)) {
|
|
ret = PTR_ERR(spi_st->base);
|
|
goto clk_disable;
|
|
}
|
|
|
|
/* Disable I2C and Reset SSC */
|
|
writel_relaxed(0x0, spi_st->base + SSC_I2C);
|
|
var = readw_relaxed(spi_st->base + SSC_CTL);
|
|
var |= SSC_CTL_SR;
|
|
writel_relaxed(var, spi_st->base + SSC_CTL);
|
|
|
|
udelay(1);
|
|
var = readl_relaxed(spi_st->base + SSC_CTL);
|
|
var &= ~SSC_CTL_SR;
|
|
writel_relaxed(var, spi_st->base + SSC_CTL);
|
|
|
|
/* Set SSC into slave mode before reconfiguring PIO pins */
|
|
var = readl_relaxed(spi_st->base + SSC_CTL);
|
|
var &= ~SSC_CTL_MS;
|
|
writel_relaxed(var, spi_st->base + SSC_CTL);
|
|
|
|
irq = irq_of_parse_and_map(np, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "IRQ missing or invalid\n");
|
|
ret = -EINVAL;
|
|
goto clk_disable;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, spi_st_irq, 0,
|
|
pdev->name, spi_st);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to request irq %d\n", irq);
|
|
goto clk_disable;
|
|
}
|
|
|
|
/* by default the device is on */
|
|
pm_runtime_set_active(&pdev->dev);
|
|
pm_runtime_enable(&pdev->dev);
|
|
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
ret = devm_spi_register_master(&pdev->dev, master);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to register master\n");
|
|
goto rpm_disable;
|
|
}
|
|
|
|
return 0;
|
|
|
|
rpm_disable:
|
|
pm_runtime_disable(&pdev->dev);
|
|
clk_disable:
|
|
clk_disable_unprepare(spi_st->clk);
|
|
put_master:
|
|
spi_master_put(master);
|
|
return ret;
|
|
}
|
|
|
|
static int spi_st_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct spi_st *spi_st = spi_master_get_devdata(master);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
clk_disable_unprepare(spi_st->clk);
|
|
|
|
pinctrl_pm_select_sleep_state(&pdev->dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int spi_st_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct spi_st *spi_st = spi_master_get_devdata(master);
|
|
|
|
writel_relaxed(0, spi_st->base + SSC_IEN);
|
|
pinctrl_pm_select_sleep_state(dev);
|
|
|
|
clk_disable_unprepare(spi_st->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int spi_st_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct spi_st *spi_st = spi_master_get_devdata(master);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(spi_st->clk);
|
|
pinctrl_pm_select_default_state(dev);
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int spi_st_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = spi_master_suspend(master);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pm_runtime_force_suspend(dev);
|
|
}
|
|
|
|
static int spi_st_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
ret = spi_master_resume(master);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return pm_runtime_force_resume(dev);
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops spi_st_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(spi_st_suspend, spi_st_resume)
|
|
SET_RUNTIME_PM_OPS(spi_st_runtime_suspend, spi_st_runtime_resume, NULL)
|
|
};
|
|
|
|
static const struct of_device_id stm_spi_match[] = {
|
|
{ .compatible = "st,comms-ssc4-spi", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm_spi_match);
|
|
|
|
static struct platform_driver spi_st_driver = {
|
|
.driver = {
|
|
.name = "spi-st",
|
|
.pm = &spi_st_pm,
|
|
.of_match_table = of_match_ptr(stm_spi_match),
|
|
},
|
|
.probe = spi_st_probe,
|
|
.remove = spi_st_remove,
|
|
};
|
|
module_platform_driver(spi_st_driver);
|
|
|
|
MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>");
|
|
MODULE_DESCRIPTION("STM SSC SPI driver");
|
|
MODULE_LICENSE("GPL v2");
|