mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 01:10:04 +00:00
![Juhee Kang](/assets/img/avatar_default.png)
Currently, most pktgen samples print the execution result when the program is terminated normally. However, sample03 doesn't work appropriately. This is results of samples: # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample04_many_flows.sh -n 1 Running... ctrl^C to stop Device: eth0@0 Result: OK: 19(c5+d13) usec, 1 (60byte,0frags) 51762pps 24Mb/sec (24845760bps) errors: 0 # DEV=eth0 DEST_IP=10.1.0.1 DST_MAC=00:11:22:33:44:55 ./pktgen_sample03_burst_single_flow.sh -n 1 Running... ctrl^C to stop The reason why it doesn't print the execution result when the program is terminated usually is that sample03 doesn't call the function which prints the result, unlike other samples. So, this commit solves this issue by calling the function before termination. Also, this commit changes control_c function to print_result to maintain consistency with other samples. Signed-off-by: Juhee Kang <claudiajkang@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
106 lines
3.3 KiB
Bash
Executable file
106 lines
3.3 KiB
Bash
Executable file
#!/bin/bash
|
|
# SPDX-License-Identifier: GPL-2.0
|
|
#
|
|
# Script for max single flow performance
|
|
# - If correctly tuned[1], single CPU 10G wirespeed small pkts is possible[2]
|
|
#
|
|
# Using pktgen "burst" option (use -b $N)
|
|
# - To boost max performance
|
|
# - Avail since: kernel v3.18
|
|
# * commit 38b2cf2982dc73 ("net: pktgen: packet bursting via skb->xmit_more")
|
|
# - This avoids writing the HW tailptr on every driver xmit
|
|
# - The performance boost is impressive, see commit and blog [2]
|
|
#
|
|
# Notice: On purpose generates a single (UDP) flow towards target,
|
|
# reason behind this is to only overload/activate a single CPU on
|
|
# target host. And no randomness for pktgen also makes it faster.
|
|
#
|
|
# Tuning see:
|
|
# [1] http://netoptimizer.blogspot.dk/2014/06/pktgen-for-network-overload-testing.html
|
|
# [2] http://netoptimizer.blogspot.dk/2014/10/unlocked-10gbps-tx-wirespeed-smallest.html
|
|
#
|
|
basedir=`dirname $0`
|
|
source ${basedir}/functions.sh
|
|
root_check_run_with_sudo "$@"
|
|
|
|
# Parameter parsing via include
|
|
source ${basedir}/parameters.sh
|
|
# Set some default params, if they didn't get set
|
|
if [ -z "$DEST_IP" ]; then
|
|
[ -z "$IP6" ] && DEST_IP="198.18.0.42" || DEST_IP="FD00::1"
|
|
fi
|
|
[ -z "$DST_MAC" ] && DST_MAC="90:e2:ba:ff:ff:ff"
|
|
[ -z "$BURST" ] && BURST=32
|
|
[ -z "$CLONE_SKB" ] && CLONE_SKB="0" # No need for clones when bursting
|
|
[ -z "$COUNT" ] && COUNT="0" # Zero means indefinitely
|
|
if [ -n "$DEST_IP" ]; then
|
|
validate_addr${IP6} $DEST_IP
|
|
read -r DST_MIN DST_MAX <<< $(parse_addr${IP6} $DEST_IP)
|
|
fi
|
|
if [ -n "$DST_PORT" ]; then
|
|
read -r UDP_DST_MIN UDP_DST_MAX <<< $(parse_ports $DST_PORT)
|
|
validate_ports $UDP_DST_MIN $UDP_DST_MAX
|
|
fi
|
|
|
|
# General cleanup everything since last run
|
|
[ -z "$APPEND" ] && pg_ctrl "reset"
|
|
|
|
# Threads are specified with parameter -t value in $THREADS
|
|
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
|
|
dev=${DEV}@${thread}
|
|
|
|
# Add remove all other devices and add_device $dev to thread
|
|
[ -z "$APPEND" ] && pg_thread $thread "rem_device_all"
|
|
pg_thread $thread "add_device" $dev
|
|
|
|
# Base config
|
|
pg_set $dev "flag QUEUE_MAP_CPU"
|
|
pg_set $dev "count $COUNT"
|
|
pg_set $dev "clone_skb $CLONE_SKB"
|
|
pg_set $dev "pkt_size $PKT_SIZE"
|
|
pg_set $dev "delay $DELAY"
|
|
pg_set $dev "flag NO_TIMESTAMP"
|
|
|
|
# Destination
|
|
pg_set $dev "dst_mac $DST_MAC"
|
|
pg_set $dev "dst${IP6}_min $DST_MIN"
|
|
pg_set $dev "dst${IP6}_max $DST_MAX"
|
|
|
|
if [ -n "$DST_PORT" ]; then
|
|
# Single destination port or random port range
|
|
pg_set $dev "flag UDPDST_RND"
|
|
pg_set $dev "udp_dst_min $UDP_DST_MIN"
|
|
pg_set $dev "udp_dst_max $UDP_DST_MAX"
|
|
fi
|
|
|
|
[ ! -z "$UDP_CSUM" ] && pg_set $dev "flag UDPCSUM"
|
|
|
|
# Setup burst, for easy testing -b 0 disable bursting
|
|
# (internally in pktgen default and minimum burst=1)
|
|
if [[ ${BURST} -ne 0 ]]; then
|
|
pg_set $dev "burst $BURST"
|
|
else
|
|
info "$dev: Not using burst"
|
|
fi
|
|
done
|
|
|
|
# Run if user hits control-c
|
|
function print_result() {
|
|
# Print results
|
|
for ((thread = $F_THREAD; thread <= $L_THREAD; thread++)); do
|
|
dev=${DEV}@${thread}
|
|
echo "Device: $dev"
|
|
cat /proc/net/pktgen/$dev | grep -A2 "Result:"
|
|
done
|
|
}
|
|
# trap keyboard interrupt (Ctrl-C)
|
|
trap true SIGINT
|
|
|
|
if [ -z "$APPEND" ]; then
|
|
echo "Running... ctrl^C to stop" >&2
|
|
pg_ctrl "start"
|
|
|
|
print_result
|
|
else
|
|
echo "Append mode: config done. Do more or use 'pg_ctrl start' to run"
|
|
fi
|