mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-24 01:41:39 +00:00
![Peter Hurley](/assets/img/avatar_default.png)
tty_port_close_start() already validates the port counts and issues a diagnostic if validation fails. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
4340 lines
109 KiB
C
4340 lines
109 KiB
C
/*
|
|
* linux/drivers/char/pcmcia/synclink_cs.c
|
|
*
|
|
* $Id: synclink_cs.c,v 4.34 2005/09/08 13:20:54 paulkf Exp $
|
|
*
|
|
* Device driver for Microgate SyncLink PC Card
|
|
* multiprotocol serial adapter.
|
|
*
|
|
* written by Paul Fulghum for Microgate Corporation
|
|
* paulkf@microgate.com
|
|
*
|
|
* Microgate and SyncLink are trademarks of Microgate Corporation
|
|
*
|
|
* This code is released under the GNU General Public License (GPL)
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
|
|
#if defined(__i386__)
|
|
# define BREAKPOINT() asm(" int $3");
|
|
#else
|
|
# define BREAKPOINT() { }
|
|
#endif
|
|
|
|
#define MAX_DEVICE_COUNT 4
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/time.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/major.h>
|
|
#include <linux/string.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/ptrace.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/seq_file.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioctl.h>
|
|
#include <linux/synclink.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/dma.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/types.h>
|
|
#include <linux/termios.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/hdlc.h>
|
|
|
|
#include <pcmcia/cistpl.h>
|
|
#include <pcmcia/cisreg.h>
|
|
#include <pcmcia/ds.h>
|
|
|
|
#if defined(CONFIG_HDLC) || (defined(CONFIG_HDLC_MODULE) && defined(CONFIG_SYNCLINK_CS_MODULE))
|
|
#define SYNCLINK_GENERIC_HDLC 1
|
|
#else
|
|
#define SYNCLINK_GENERIC_HDLC 0
|
|
#endif
|
|
|
|
#define GET_USER(error,value,addr) error = get_user(value,addr)
|
|
#define COPY_FROM_USER(error,dest,src,size) error = copy_from_user(dest,src,size) ? -EFAULT : 0
|
|
#define PUT_USER(error,value,addr) error = put_user(value,addr)
|
|
#define COPY_TO_USER(error,dest,src,size) error = copy_to_user(dest,src,size) ? -EFAULT : 0
|
|
|
|
#include <asm/uaccess.h>
|
|
|
|
static MGSL_PARAMS default_params = {
|
|
MGSL_MODE_HDLC, /* unsigned long mode */
|
|
0, /* unsigned char loopback; */
|
|
HDLC_FLAG_UNDERRUN_ABORT15, /* unsigned short flags; */
|
|
HDLC_ENCODING_NRZI_SPACE, /* unsigned char encoding; */
|
|
0, /* unsigned long clock_speed; */
|
|
0xff, /* unsigned char addr_filter; */
|
|
HDLC_CRC_16_CCITT, /* unsigned short crc_type; */
|
|
HDLC_PREAMBLE_LENGTH_8BITS, /* unsigned char preamble_length; */
|
|
HDLC_PREAMBLE_PATTERN_NONE, /* unsigned char preamble; */
|
|
9600, /* unsigned long data_rate; */
|
|
8, /* unsigned char data_bits; */
|
|
1, /* unsigned char stop_bits; */
|
|
ASYNC_PARITY_NONE /* unsigned char parity; */
|
|
};
|
|
|
|
typedef struct {
|
|
int count;
|
|
unsigned char status;
|
|
char data[1];
|
|
} RXBUF;
|
|
|
|
/* The queue of BH actions to be performed */
|
|
|
|
#define BH_RECEIVE 1
|
|
#define BH_TRANSMIT 2
|
|
#define BH_STATUS 4
|
|
|
|
#define IO_PIN_SHUTDOWN_LIMIT 100
|
|
|
|
#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
|
|
|
|
struct _input_signal_events {
|
|
int ri_up;
|
|
int ri_down;
|
|
int dsr_up;
|
|
int dsr_down;
|
|
int dcd_up;
|
|
int dcd_down;
|
|
int cts_up;
|
|
int cts_down;
|
|
};
|
|
|
|
|
|
/*
|
|
* Device instance data structure
|
|
*/
|
|
|
|
typedef struct _mgslpc_info {
|
|
struct tty_port port;
|
|
void *if_ptr; /* General purpose pointer (used by SPPP) */
|
|
int magic;
|
|
int line;
|
|
|
|
struct mgsl_icount icount;
|
|
|
|
int timeout;
|
|
int x_char; /* xon/xoff character */
|
|
unsigned char read_status_mask;
|
|
unsigned char ignore_status_mask;
|
|
|
|
unsigned char *tx_buf;
|
|
int tx_put;
|
|
int tx_get;
|
|
int tx_count;
|
|
|
|
/* circular list of fixed length rx buffers */
|
|
|
|
unsigned char *rx_buf; /* memory allocated for all rx buffers */
|
|
int rx_buf_total_size; /* size of memory allocated for rx buffers */
|
|
int rx_put; /* index of next empty rx buffer */
|
|
int rx_get; /* index of next full rx buffer */
|
|
int rx_buf_size; /* size in bytes of single rx buffer */
|
|
int rx_buf_count; /* total number of rx buffers */
|
|
int rx_frame_count; /* number of full rx buffers */
|
|
|
|
wait_queue_head_t status_event_wait_q;
|
|
wait_queue_head_t event_wait_q;
|
|
struct timer_list tx_timer; /* HDLC transmit timeout timer */
|
|
struct _mgslpc_info *next_device; /* device list link */
|
|
|
|
unsigned short imra_value;
|
|
unsigned short imrb_value;
|
|
unsigned char pim_value;
|
|
|
|
spinlock_t lock;
|
|
struct work_struct task; /* task structure for scheduling bh */
|
|
|
|
u32 max_frame_size;
|
|
|
|
u32 pending_bh;
|
|
|
|
bool bh_running;
|
|
bool bh_requested;
|
|
|
|
int dcd_chkcount; /* check counts to prevent */
|
|
int cts_chkcount; /* too many IRQs if a signal */
|
|
int dsr_chkcount; /* is floating */
|
|
int ri_chkcount;
|
|
|
|
bool rx_enabled;
|
|
bool rx_overflow;
|
|
|
|
bool tx_enabled;
|
|
bool tx_active;
|
|
bool tx_aborting;
|
|
u32 idle_mode;
|
|
|
|
int if_mode; /* serial interface selection (RS-232, v.35 etc) */
|
|
|
|
char device_name[25]; /* device instance name */
|
|
|
|
unsigned int io_base; /* base I/O address of adapter */
|
|
unsigned int irq_level;
|
|
|
|
MGSL_PARAMS params; /* communications parameters */
|
|
|
|
unsigned char serial_signals; /* current serial signal states */
|
|
|
|
bool irq_occurred; /* for diagnostics use */
|
|
char testing_irq;
|
|
unsigned int init_error; /* startup error (DIAGS) */
|
|
|
|
char *flag_buf;
|
|
bool drop_rts_on_tx_done;
|
|
|
|
struct _input_signal_events input_signal_events;
|
|
|
|
/* PCMCIA support */
|
|
struct pcmcia_device *p_dev;
|
|
int stop;
|
|
|
|
/* SPPP/Cisco HDLC device parts */
|
|
int netcount;
|
|
spinlock_t netlock;
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
struct net_device *netdev;
|
|
#endif
|
|
|
|
} MGSLPC_INFO;
|
|
|
|
#define MGSLPC_MAGIC 0x5402
|
|
|
|
/*
|
|
* The size of the serial xmit buffer is 1 page, or 4096 bytes
|
|
*/
|
|
#define TXBUFSIZE 4096
|
|
|
|
|
|
#define CHA 0x00 /* channel A offset */
|
|
#define CHB 0x40 /* channel B offset */
|
|
|
|
/*
|
|
* FIXME: PPC has PVR defined in asm/reg.h. For now we just undef it.
|
|
*/
|
|
#undef PVR
|
|
|
|
#define RXFIFO 0
|
|
#define TXFIFO 0
|
|
#define STAR 0x20
|
|
#define CMDR 0x20
|
|
#define RSTA 0x21
|
|
#define PRE 0x21
|
|
#define MODE 0x22
|
|
#define TIMR 0x23
|
|
#define XAD1 0x24
|
|
#define XAD2 0x25
|
|
#define RAH1 0x26
|
|
#define RAH2 0x27
|
|
#define DAFO 0x27
|
|
#define RAL1 0x28
|
|
#define RFC 0x28
|
|
#define RHCR 0x29
|
|
#define RAL2 0x29
|
|
#define RBCL 0x2a
|
|
#define XBCL 0x2a
|
|
#define RBCH 0x2b
|
|
#define XBCH 0x2b
|
|
#define CCR0 0x2c
|
|
#define CCR1 0x2d
|
|
#define CCR2 0x2e
|
|
#define CCR3 0x2f
|
|
#define VSTR 0x34
|
|
#define BGR 0x34
|
|
#define RLCR 0x35
|
|
#define AML 0x36
|
|
#define AMH 0x37
|
|
#define GIS 0x38
|
|
#define IVA 0x38
|
|
#define IPC 0x39
|
|
#define ISR 0x3a
|
|
#define IMR 0x3a
|
|
#define PVR 0x3c
|
|
#define PIS 0x3d
|
|
#define PIM 0x3d
|
|
#define PCR 0x3e
|
|
#define CCR4 0x3f
|
|
|
|
// IMR/ISR
|
|
|
|
#define IRQ_BREAK_ON BIT15 // rx break detected
|
|
#define IRQ_DATAOVERRUN BIT14 // receive data overflow
|
|
#define IRQ_ALLSENT BIT13 // all sent
|
|
#define IRQ_UNDERRUN BIT12 // transmit data underrun
|
|
#define IRQ_TIMER BIT11 // timer interrupt
|
|
#define IRQ_CTS BIT10 // CTS status change
|
|
#define IRQ_TXREPEAT BIT9 // tx message repeat
|
|
#define IRQ_TXFIFO BIT8 // transmit pool ready
|
|
#define IRQ_RXEOM BIT7 // receive message end
|
|
#define IRQ_EXITHUNT BIT6 // receive frame start
|
|
#define IRQ_RXTIME BIT6 // rx char timeout
|
|
#define IRQ_DCD BIT2 // carrier detect status change
|
|
#define IRQ_OVERRUN BIT1 // receive frame overflow
|
|
#define IRQ_RXFIFO BIT0 // receive pool full
|
|
|
|
// STAR
|
|
|
|
#define XFW BIT6 // transmit FIFO write enable
|
|
#define CEC BIT2 // command executing
|
|
#define CTS BIT1 // CTS state
|
|
|
|
#define PVR_DTR BIT0
|
|
#define PVR_DSR BIT1
|
|
#define PVR_RI BIT2
|
|
#define PVR_AUTOCTS BIT3
|
|
#define PVR_RS232 0x20 /* 0010b */
|
|
#define PVR_V35 0xe0 /* 1110b */
|
|
#define PVR_RS422 0x40 /* 0100b */
|
|
|
|
/* Register access functions */
|
|
|
|
#define write_reg(info, reg, val) outb((val),(info)->io_base + (reg))
|
|
#define read_reg(info, reg) inb((info)->io_base + (reg))
|
|
|
|
#define read_reg16(info, reg) inw((info)->io_base + (reg))
|
|
#define write_reg16(info, reg, val) outw((val), (info)->io_base + (reg))
|
|
|
|
#define set_reg_bits(info, reg, mask) \
|
|
write_reg(info, (reg), \
|
|
(unsigned char) (read_reg(info, (reg)) | (mask)))
|
|
#define clear_reg_bits(info, reg, mask) \
|
|
write_reg(info, (reg), \
|
|
(unsigned char) (read_reg(info, (reg)) & ~(mask)))
|
|
/*
|
|
* interrupt enable/disable routines
|
|
*/
|
|
static void irq_disable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
|
|
{
|
|
if (channel == CHA) {
|
|
info->imra_value |= mask;
|
|
write_reg16(info, CHA + IMR, info->imra_value);
|
|
} else {
|
|
info->imrb_value |= mask;
|
|
write_reg16(info, CHB + IMR, info->imrb_value);
|
|
}
|
|
}
|
|
static void irq_enable(MGSLPC_INFO *info, unsigned char channel, unsigned short mask)
|
|
{
|
|
if (channel == CHA) {
|
|
info->imra_value &= ~mask;
|
|
write_reg16(info, CHA + IMR, info->imra_value);
|
|
} else {
|
|
info->imrb_value &= ~mask;
|
|
write_reg16(info, CHB + IMR, info->imrb_value);
|
|
}
|
|
}
|
|
|
|
#define port_irq_disable(info, mask) \
|
|
{ info->pim_value |= (mask); write_reg(info, PIM, info->pim_value); }
|
|
|
|
#define port_irq_enable(info, mask) \
|
|
{ info->pim_value &= ~(mask); write_reg(info, PIM, info->pim_value); }
|
|
|
|
static void rx_start(MGSLPC_INFO *info);
|
|
static void rx_stop(MGSLPC_INFO *info);
|
|
|
|
static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty);
|
|
static void tx_stop(MGSLPC_INFO *info);
|
|
static void tx_set_idle(MGSLPC_INFO *info);
|
|
|
|
static void get_signals(MGSLPC_INFO *info);
|
|
static void set_signals(MGSLPC_INFO *info);
|
|
|
|
static void reset_device(MGSLPC_INFO *info);
|
|
|
|
static void hdlc_mode(MGSLPC_INFO *info);
|
|
static void async_mode(MGSLPC_INFO *info);
|
|
|
|
static void tx_timeout(unsigned long context);
|
|
|
|
static int carrier_raised(struct tty_port *port);
|
|
static void dtr_rts(struct tty_port *port, int onoff);
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
#define dev_to_port(D) (dev_to_hdlc(D)->priv)
|
|
static void hdlcdev_tx_done(MGSLPC_INFO *info);
|
|
static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size);
|
|
static int hdlcdev_init(MGSLPC_INFO *info);
|
|
static void hdlcdev_exit(MGSLPC_INFO *info);
|
|
#endif
|
|
|
|
static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit);
|
|
|
|
static bool register_test(MGSLPC_INFO *info);
|
|
static bool irq_test(MGSLPC_INFO *info);
|
|
static int adapter_test(MGSLPC_INFO *info);
|
|
|
|
static int claim_resources(MGSLPC_INFO *info);
|
|
static void release_resources(MGSLPC_INFO *info);
|
|
static int mgslpc_add_device(MGSLPC_INFO *info);
|
|
static void mgslpc_remove_device(MGSLPC_INFO *info);
|
|
|
|
static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty);
|
|
static void rx_reset_buffers(MGSLPC_INFO *info);
|
|
static int rx_alloc_buffers(MGSLPC_INFO *info);
|
|
static void rx_free_buffers(MGSLPC_INFO *info);
|
|
|
|
static irqreturn_t mgslpc_isr(int irq, void *dev_id);
|
|
|
|
/*
|
|
* Bottom half interrupt handlers
|
|
*/
|
|
static void bh_handler(struct work_struct *work);
|
|
static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty);
|
|
static void bh_status(MGSLPC_INFO *info);
|
|
|
|
/*
|
|
* ioctl handlers
|
|
*/
|
|
static int tiocmget(struct tty_struct *tty);
|
|
static int tiocmset(struct tty_struct *tty,
|
|
unsigned int set, unsigned int clear);
|
|
static int get_stats(MGSLPC_INFO *info, struct mgsl_icount __user *user_icount);
|
|
static int get_params(MGSLPC_INFO *info, MGSL_PARAMS __user *user_params);
|
|
static int set_params(MGSLPC_INFO *info, MGSL_PARAMS __user *new_params, struct tty_struct *tty);
|
|
static int get_txidle(MGSLPC_INFO *info, int __user *idle_mode);
|
|
static int set_txidle(MGSLPC_INFO *info, int idle_mode);
|
|
static int set_txenable(MGSLPC_INFO *info, int enable, struct tty_struct *tty);
|
|
static int tx_abort(MGSLPC_INFO *info);
|
|
static int set_rxenable(MGSLPC_INFO *info, int enable);
|
|
static int wait_events(MGSLPC_INFO *info, int __user *mask);
|
|
|
|
static MGSLPC_INFO *mgslpc_device_list = NULL;
|
|
static int mgslpc_device_count = 0;
|
|
|
|
/*
|
|
* Set this param to non-zero to load eax with the
|
|
* .text section address and breakpoint on module load.
|
|
* This is useful for use with gdb and add-symbol-file command.
|
|
*/
|
|
static bool break_on_load=0;
|
|
|
|
/*
|
|
* Driver major number, defaults to zero to get auto
|
|
* assigned major number. May be forced as module parameter.
|
|
*/
|
|
static int ttymajor=0;
|
|
|
|
static int debug_level = 0;
|
|
static int maxframe[MAX_DEVICE_COUNT] = {0,};
|
|
|
|
module_param(break_on_load, bool, 0);
|
|
module_param(ttymajor, int, 0);
|
|
module_param(debug_level, int, 0);
|
|
module_param_array(maxframe, int, NULL, 0);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static char *driver_name = "SyncLink PC Card driver";
|
|
static char *driver_version = "$Revision: 4.34 $";
|
|
|
|
static struct tty_driver *serial_driver;
|
|
|
|
/* number of characters left in xmit buffer before we ask for more */
|
|
#define WAKEUP_CHARS 256
|
|
|
|
static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty);
|
|
static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout);
|
|
|
|
/* PCMCIA prototypes */
|
|
|
|
static int mgslpc_config(struct pcmcia_device *link);
|
|
static void mgslpc_release(u_long arg);
|
|
static void mgslpc_detach(struct pcmcia_device *p_dev);
|
|
|
|
/*
|
|
* 1st function defined in .text section. Calling this function in
|
|
* init_module() followed by a breakpoint allows a remote debugger
|
|
* (gdb) to get the .text address for the add-symbol-file command.
|
|
* This allows remote debugging of dynamically loadable modules.
|
|
*/
|
|
static void* mgslpc_get_text_ptr(void)
|
|
{
|
|
return mgslpc_get_text_ptr;
|
|
}
|
|
|
|
/**
|
|
* line discipline callback wrappers
|
|
*
|
|
* The wrappers maintain line discipline references
|
|
* while calling into the line discipline.
|
|
*
|
|
* ldisc_receive_buf - pass receive data to line discipline
|
|
*/
|
|
|
|
static void ldisc_receive_buf(struct tty_struct *tty,
|
|
const __u8 *data, char *flags, int count)
|
|
{
|
|
struct tty_ldisc *ld;
|
|
if (!tty)
|
|
return;
|
|
ld = tty_ldisc_ref(tty);
|
|
if (ld) {
|
|
if (ld->ops->receive_buf)
|
|
ld->ops->receive_buf(tty, data, flags, count);
|
|
tty_ldisc_deref(ld);
|
|
}
|
|
}
|
|
|
|
static const struct tty_port_operations mgslpc_port_ops = {
|
|
.carrier_raised = carrier_raised,
|
|
.dtr_rts = dtr_rts
|
|
};
|
|
|
|
static int mgslpc_probe(struct pcmcia_device *link)
|
|
{
|
|
MGSLPC_INFO *info;
|
|
int ret;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("mgslpc_attach\n");
|
|
|
|
info = kzalloc(sizeof(MGSLPC_INFO), GFP_KERNEL);
|
|
if (!info) {
|
|
printk("Error can't allocate device instance data\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info->magic = MGSLPC_MAGIC;
|
|
tty_port_init(&info->port);
|
|
info->port.ops = &mgslpc_port_ops;
|
|
INIT_WORK(&info->task, bh_handler);
|
|
info->max_frame_size = 4096;
|
|
info->port.close_delay = 5*HZ/10;
|
|
info->port.closing_wait = 30*HZ;
|
|
init_waitqueue_head(&info->status_event_wait_q);
|
|
init_waitqueue_head(&info->event_wait_q);
|
|
spin_lock_init(&info->lock);
|
|
spin_lock_init(&info->netlock);
|
|
memcpy(&info->params,&default_params,sizeof(MGSL_PARAMS));
|
|
info->idle_mode = HDLC_TXIDLE_FLAGS;
|
|
info->imra_value = 0xffff;
|
|
info->imrb_value = 0xffff;
|
|
info->pim_value = 0xff;
|
|
|
|
info->p_dev = link;
|
|
link->priv = info;
|
|
|
|
/* Initialize the struct pcmcia_device structure */
|
|
|
|
ret = mgslpc_config(link);
|
|
if (ret != 0)
|
|
goto failed;
|
|
|
|
ret = mgslpc_add_device(info);
|
|
if (ret != 0)
|
|
goto failed_release;
|
|
|
|
return 0;
|
|
|
|
failed_release:
|
|
mgslpc_release((u_long)link);
|
|
failed:
|
|
tty_port_destroy(&info->port);
|
|
kfree(info);
|
|
return ret;
|
|
}
|
|
|
|
/* Card has been inserted.
|
|
*/
|
|
|
|
static int mgslpc_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
|
|
{
|
|
return pcmcia_request_io(p_dev);
|
|
}
|
|
|
|
static int mgslpc_config(struct pcmcia_device *link)
|
|
{
|
|
MGSLPC_INFO *info = link->priv;
|
|
int ret;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("mgslpc_config(0x%p)\n", link);
|
|
|
|
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO;
|
|
|
|
ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL);
|
|
if (ret != 0)
|
|
goto failed;
|
|
|
|
link->config_index = 8;
|
|
link->config_regs = PRESENT_OPTION;
|
|
|
|
ret = pcmcia_request_irq(link, mgslpc_isr);
|
|
if (ret)
|
|
goto failed;
|
|
ret = pcmcia_enable_device(link);
|
|
if (ret)
|
|
goto failed;
|
|
|
|
info->io_base = link->resource[0]->start;
|
|
info->irq_level = link->irq;
|
|
return 0;
|
|
|
|
failed:
|
|
mgslpc_release((u_long)link);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Card has been removed.
|
|
* Unregister device and release PCMCIA configuration.
|
|
* If device is open, postpone until it is closed.
|
|
*/
|
|
static void mgslpc_release(u_long arg)
|
|
{
|
|
struct pcmcia_device *link = (struct pcmcia_device *)arg;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("mgslpc_release(0x%p)\n", link);
|
|
|
|
pcmcia_disable_device(link);
|
|
}
|
|
|
|
static void mgslpc_detach(struct pcmcia_device *link)
|
|
{
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("mgslpc_detach(0x%p)\n", link);
|
|
|
|
((MGSLPC_INFO *)link->priv)->stop = 1;
|
|
mgslpc_release((u_long)link);
|
|
|
|
mgslpc_remove_device((MGSLPC_INFO *)link->priv);
|
|
}
|
|
|
|
static int mgslpc_suspend(struct pcmcia_device *link)
|
|
{
|
|
MGSLPC_INFO *info = link->priv;
|
|
|
|
info->stop = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mgslpc_resume(struct pcmcia_device *link)
|
|
{
|
|
MGSLPC_INFO *info = link->priv;
|
|
|
|
info->stop = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static inline bool mgslpc_paranoia_check(MGSLPC_INFO *info,
|
|
char *name, const char *routine)
|
|
{
|
|
#ifdef MGSLPC_PARANOIA_CHECK
|
|
static const char *badmagic =
|
|
"Warning: bad magic number for mgsl struct (%s) in %s\n";
|
|
static const char *badinfo =
|
|
"Warning: null mgslpc_info for (%s) in %s\n";
|
|
|
|
if (!info) {
|
|
printk(badinfo, name, routine);
|
|
return true;
|
|
}
|
|
if (info->magic != MGSLPC_MAGIC) {
|
|
printk(badmagic, name, routine);
|
|
return true;
|
|
}
|
|
#else
|
|
if (!info)
|
|
return true;
|
|
#endif
|
|
return false;
|
|
}
|
|
|
|
|
|
#define CMD_RXFIFO BIT7 // release current rx FIFO
|
|
#define CMD_RXRESET BIT6 // receiver reset
|
|
#define CMD_RXFIFO_READ BIT5
|
|
#define CMD_START_TIMER BIT4
|
|
#define CMD_TXFIFO BIT3 // release current tx FIFO
|
|
#define CMD_TXEOM BIT1 // transmit end message
|
|
#define CMD_TXRESET BIT0 // transmit reset
|
|
|
|
static bool wait_command_complete(MGSLPC_INFO *info, unsigned char channel)
|
|
{
|
|
int i = 0;
|
|
/* wait for command completion */
|
|
while (read_reg(info, (unsigned char)(channel+STAR)) & BIT2) {
|
|
udelay(1);
|
|
if (i++ == 1000)
|
|
return false;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
static void issue_command(MGSLPC_INFO *info, unsigned char channel, unsigned char cmd)
|
|
{
|
|
wait_command_complete(info, channel);
|
|
write_reg(info, (unsigned char) (channel + CMDR), cmd);
|
|
}
|
|
|
|
static void tx_pause(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "tx_pause"))
|
|
return;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("tx_pause(%s)\n", info->device_name);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (info->tx_enabled)
|
|
tx_stop(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
|
|
static void tx_release(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "tx_release"))
|
|
return;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("tx_release(%s)\n", info->device_name);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (!info->tx_enabled)
|
|
tx_start(info, tty);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
|
|
/* Return next bottom half action to perform.
|
|
* or 0 if nothing to do.
|
|
*/
|
|
static int bh_action(MGSLPC_INFO *info)
|
|
{
|
|
unsigned long flags;
|
|
int rc = 0;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
|
|
if (info->pending_bh & BH_RECEIVE) {
|
|
info->pending_bh &= ~BH_RECEIVE;
|
|
rc = BH_RECEIVE;
|
|
} else if (info->pending_bh & BH_TRANSMIT) {
|
|
info->pending_bh &= ~BH_TRANSMIT;
|
|
rc = BH_TRANSMIT;
|
|
} else if (info->pending_bh & BH_STATUS) {
|
|
info->pending_bh &= ~BH_STATUS;
|
|
rc = BH_STATUS;
|
|
}
|
|
|
|
if (!rc) {
|
|
/* Mark BH routine as complete */
|
|
info->bh_running = false;
|
|
info->bh_requested = false;
|
|
}
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void bh_handler(struct work_struct *work)
|
|
{
|
|
MGSLPC_INFO *info = container_of(work, MGSLPC_INFO, task);
|
|
struct tty_struct *tty;
|
|
int action;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_BH)
|
|
printk("%s(%d):bh_handler(%s) entry\n",
|
|
__FILE__,__LINE__,info->device_name);
|
|
|
|
info->bh_running = true;
|
|
tty = tty_port_tty_get(&info->port);
|
|
|
|
while((action = bh_action(info)) != 0) {
|
|
|
|
/* Process work item */
|
|
if (debug_level >= DEBUG_LEVEL_BH)
|
|
printk("%s(%d):bh_handler() work item action=%d\n",
|
|
__FILE__,__LINE__,action);
|
|
|
|
switch (action) {
|
|
|
|
case BH_RECEIVE:
|
|
while(rx_get_frame(info, tty));
|
|
break;
|
|
case BH_TRANSMIT:
|
|
bh_transmit(info, tty);
|
|
break;
|
|
case BH_STATUS:
|
|
bh_status(info);
|
|
break;
|
|
default:
|
|
/* unknown work item ID */
|
|
printk("Unknown work item ID=%08X!\n", action);
|
|
break;
|
|
}
|
|
}
|
|
|
|
tty_kref_put(tty);
|
|
if (debug_level >= DEBUG_LEVEL_BH)
|
|
printk("%s(%d):bh_handler(%s) exit\n",
|
|
__FILE__,__LINE__,info->device_name);
|
|
}
|
|
|
|
static void bh_transmit(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
if (debug_level >= DEBUG_LEVEL_BH)
|
|
printk("bh_transmit() entry on %s\n", info->device_name);
|
|
|
|
if (tty)
|
|
tty_wakeup(tty);
|
|
}
|
|
|
|
static void bh_status(MGSLPC_INFO *info)
|
|
{
|
|
info->ri_chkcount = 0;
|
|
info->dsr_chkcount = 0;
|
|
info->dcd_chkcount = 0;
|
|
info->cts_chkcount = 0;
|
|
}
|
|
|
|
/* eom: non-zero = end of frame */
|
|
static void rx_ready_hdlc(MGSLPC_INFO *info, int eom)
|
|
{
|
|
unsigned char data[2];
|
|
unsigned char fifo_count, read_count, i;
|
|
RXBUF *buf = (RXBUF*)(info->rx_buf + (info->rx_put * info->rx_buf_size));
|
|
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):rx_ready_hdlc(eom=%d)\n", __FILE__, __LINE__, eom);
|
|
|
|
if (!info->rx_enabled)
|
|
return;
|
|
|
|
if (info->rx_frame_count >= info->rx_buf_count) {
|
|
/* no more free buffers */
|
|
issue_command(info, CHA, CMD_RXRESET);
|
|
info->pending_bh |= BH_RECEIVE;
|
|
info->rx_overflow = true;
|
|
info->icount.buf_overrun++;
|
|
return;
|
|
}
|
|
|
|
if (eom) {
|
|
/* end of frame, get FIFO count from RBCL register */
|
|
fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
|
|
if (fifo_count == 0)
|
|
fifo_count = 32;
|
|
} else
|
|
fifo_count = 32;
|
|
|
|
do {
|
|
if (fifo_count == 1) {
|
|
read_count = 1;
|
|
data[0] = read_reg(info, CHA + RXFIFO);
|
|
} else {
|
|
read_count = 2;
|
|
*((unsigned short *) data) = read_reg16(info, CHA + RXFIFO);
|
|
}
|
|
fifo_count -= read_count;
|
|
if (!fifo_count && eom)
|
|
buf->status = data[--read_count];
|
|
|
|
for (i = 0; i < read_count; i++) {
|
|
if (buf->count >= info->max_frame_size) {
|
|
/* frame too large, reset receiver and reset current buffer */
|
|
issue_command(info, CHA, CMD_RXRESET);
|
|
buf->count = 0;
|
|
return;
|
|
}
|
|
*(buf->data + buf->count) = data[i];
|
|
buf->count++;
|
|
}
|
|
} while (fifo_count);
|
|
|
|
if (eom) {
|
|
info->pending_bh |= BH_RECEIVE;
|
|
info->rx_frame_count++;
|
|
info->rx_put++;
|
|
if (info->rx_put >= info->rx_buf_count)
|
|
info->rx_put = 0;
|
|
}
|
|
issue_command(info, CHA, CMD_RXFIFO);
|
|
}
|
|
|
|
static void rx_ready_async(MGSLPC_INFO *info, int tcd)
|
|
{
|
|
struct tty_port *port = &info->port;
|
|
unsigned char data, status, flag;
|
|
int fifo_count;
|
|
int work = 0;
|
|
struct mgsl_icount *icount = &info->icount;
|
|
|
|
if (tcd) {
|
|
/* early termination, get FIFO count from RBCL register */
|
|
fifo_count = (unsigned char)(read_reg(info, CHA+RBCL) & 0x1f);
|
|
|
|
/* Zero fifo count could mean 0 or 32 bytes available.
|
|
* If BIT5 of STAR is set then at least 1 byte is available.
|
|
*/
|
|
if (!fifo_count && (read_reg(info,CHA+STAR) & BIT5))
|
|
fifo_count = 32;
|
|
} else
|
|
fifo_count = 32;
|
|
|
|
tty_buffer_request_room(port, fifo_count);
|
|
/* Flush received async data to receive data buffer. */
|
|
while (fifo_count) {
|
|
data = read_reg(info, CHA + RXFIFO);
|
|
status = read_reg(info, CHA + RXFIFO);
|
|
fifo_count -= 2;
|
|
|
|
icount->rx++;
|
|
flag = TTY_NORMAL;
|
|
|
|
// if no frameing/crc error then save data
|
|
// BIT7:parity error
|
|
// BIT6:framing error
|
|
|
|
if (status & (BIT7 + BIT6)) {
|
|
if (status & BIT7)
|
|
icount->parity++;
|
|
else
|
|
icount->frame++;
|
|
|
|
/* discard char if tty control flags say so */
|
|
if (status & info->ignore_status_mask)
|
|
continue;
|
|
|
|
status &= info->read_status_mask;
|
|
|
|
if (status & BIT7)
|
|
flag = TTY_PARITY;
|
|
else if (status & BIT6)
|
|
flag = TTY_FRAME;
|
|
}
|
|
work += tty_insert_flip_char(port, data, flag);
|
|
}
|
|
issue_command(info, CHA, CMD_RXFIFO);
|
|
|
|
if (debug_level >= DEBUG_LEVEL_ISR) {
|
|
printk("%s(%d):rx_ready_async",
|
|
__FILE__,__LINE__);
|
|
printk("%s(%d):rx=%d brk=%d parity=%d frame=%d overrun=%d\n",
|
|
__FILE__,__LINE__,icount->rx,icount->brk,
|
|
icount->parity,icount->frame,icount->overrun);
|
|
}
|
|
|
|
if (work)
|
|
tty_flip_buffer_push(port);
|
|
}
|
|
|
|
|
|
static void tx_done(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
if (!info->tx_active)
|
|
return;
|
|
|
|
info->tx_active = false;
|
|
info->tx_aborting = false;
|
|
|
|
if (info->params.mode == MGSL_MODE_ASYNC)
|
|
return;
|
|
|
|
info->tx_count = info->tx_put = info->tx_get = 0;
|
|
del_timer(&info->tx_timer);
|
|
|
|
if (info->drop_rts_on_tx_done) {
|
|
get_signals(info);
|
|
if (info->serial_signals & SerialSignal_RTS) {
|
|
info->serial_signals &= ~SerialSignal_RTS;
|
|
set_signals(info);
|
|
}
|
|
info->drop_rts_on_tx_done = false;
|
|
}
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount)
|
|
hdlcdev_tx_done(info);
|
|
else
|
|
#endif
|
|
{
|
|
if (tty && (tty->stopped || tty->hw_stopped)) {
|
|
tx_stop(info);
|
|
return;
|
|
}
|
|
info->pending_bh |= BH_TRANSMIT;
|
|
}
|
|
}
|
|
|
|
static void tx_ready(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
unsigned char fifo_count = 32;
|
|
int c;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):tx_ready(%s)\n", __FILE__, __LINE__, info->device_name);
|
|
|
|
if (info->params.mode == MGSL_MODE_HDLC) {
|
|
if (!info->tx_active)
|
|
return;
|
|
} else {
|
|
if (tty && (tty->stopped || tty->hw_stopped)) {
|
|
tx_stop(info);
|
|
return;
|
|
}
|
|
if (!info->tx_count)
|
|
info->tx_active = false;
|
|
}
|
|
|
|
if (!info->tx_count)
|
|
return;
|
|
|
|
while (info->tx_count && fifo_count) {
|
|
c = min(2, min_t(int, fifo_count, min(info->tx_count, TXBUFSIZE - info->tx_get)));
|
|
|
|
if (c == 1) {
|
|
write_reg(info, CHA + TXFIFO, *(info->tx_buf + info->tx_get));
|
|
} else {
|
|
write_reg16(info, CHA + TXFIFO,
|
|
*((unsigned short*)(info->tx_buf + info->tx_get)));
|
|
}
|
|
info->tx_count -= c;
|
|
info->tx_get = (info->tx_get + c) & (TXBUFSIZE - 1);
|
|
fifo_count -= c;
|
|
}
|
|
|
|
if (info->params.mode == MGSL_MODE_ASYNC) {
|
|
if (info->tx_count < WAKEUP_CHARS)
|
|
info->pending_bh |= BH_TRANSMIT;
|
|
issue_command(info, CHA, CMD_TXFIFO);
|
|
} else {
|
|
if (info->tx_count)
|
|
issue_command(info, CHA, CMD_TXFIFO);
|
|
else
|
|
issue_command(info, CHA, CMD_TXFIFO + CMD_TXEOM);
|
|
}
|
|
}
|
|
|
|
static void cts_change(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
get_signals(info);
|
|
if ((info->cts_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
|
|
irq_disable(info, CHB, IRQ_CTS);
|
|
info->icount.cts++;
|
|
if (info->serial_signals & SerialSignal_CTS)
|
|
info->input_signal_events.cts_up++;
|
|
else
|
|
info->input_signal_events.cts_down++;
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
|
|
if (tty && tty_port_cts_enabled(&info->port)) {
|
|
if (tty->hw_stopped) {
|
|
if (info->serial_signals & SerialSignal_CTS) {
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("CTS tx start...");
|
|
tty->hw_stopped = 0;
|
|
tx_start(info, tty);
|
|
info->pending_bh |= BH_TRANSMIT;
|
|
return;
|
|
}
|
|
} else {
|
|
if (!(info->serial_signals & SerialSignal_CTS)) {
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("CTS tx stop...");
|
|
tty->hw_stopped = 1;
|
|
tx_stop(info);
|
|
}
|
|
}
|
|
}
|
|
info->pending_bh |= BH_STATUS;
|
|
}
|
|
|
|
static void dcd_change(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
get_signals(info);
|
|
if ((info->dcd_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
|
|
irq_disable(info, CHB, IRQ_DCD);
|
|
info->icount.dcd++;
|
|
if (info->serial_signals & SerialSignal_DCD) {
|
|
info->input_signal_events.dcd_up++;
|
|
}
|
|
else
|
|
info->input_signal_events.dcd_down++;
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount) {
|
|
if (info->serial_signals & SerialSignal_DCD)
|
|
netif_carrier_on(info->netdev);
|
|
else
|
|
netif_carrier_off(info->netdev);
|
|
}
|
|
#endif
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
|
|
if (info->port.flags & ASYNC_CHECK_CD) {
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s CD now %s...", info->device_name,
|
|
(info->serial_signals & SerialSignal_DCD) ? "on" : "off");
|
|
if (info->serial_signals & SerialSignal_DCD)
|
|
wake_up_interruptible(&info->port.open_wait);
|
|
else {
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("doing serial hangup...");
|
|
if (tty)
|
|
tty_hangup(tty);
|
|
}
|
|
}
|
|
info->pending_bh |= BH_STATUS;
|
|
}
|
|
|
|
static void dsr_change(MGSLPC_INFO *info)
|
|
{
|
|
get_signals(info);
|
|
if ((info->dsr_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
|
|
port_irq_disable(info, PVR_DSR);
|
|
info->icount.dsr++;
|
|
if (info->serial_signals & SerialSignal_DSR)
|
|
info->input_signal_events.dsr_up++;
|
|
else
|
|
info->input_signal_events.dsr_down++;
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
info->pending_bh |= BH_STATUS;
|
|
}
|
|
|
|
static void ri_change(MGSLPC_INFO *info)
|
|
{
|
|
get_signals(info);
|
|
if ((info->ri_chkcount)++ >= IO_PIN_SHUTDOWN_LIMIT)
|
|
port_irq_disable(info, PVR_RI);
|
|
info->icount.rng++;
|
|
if (info->serial_signals & SerialSignal_RI)
|
|
info->input_signal_events.ri_up++;
|
|
else
|
|
info->input_signal_events.ri_down++;
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
info->pending_bh |= BH_STATUS;
|
|
}
|
|
|
|
/* Interrupt service routine entry point.
|
|
*
|
|
* Arguments:
|
|
*
|
|
* irq interrupt number that caused interrupt
|
|
* dev_id device ID supplied during interrupt registration
|
|
*/
|
|
static irqreturn_t mgslpc_isr(int dummy, void *dev_id)
|
|
{
|
|
MGSLPC_INFO *info = dev_id;
|
|
struct tty_struct *tty;
|
|
unsigned short isr;
|
|
unsigned char gis, pis;
|
|
int count=0;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("mgslpc_isr(%d) entry.\n", info->irq_level);
|
|
|
|
if (!(info->p_dev->_locked))
|
|
return IRQ_HANDLED;
|
|
|
|
tty = tty_port_tty_get(&info->port);
|
|
|
|
spin_lock(&info->lock);
|
|
|
|
while ((gis = read_reg(info, CHA + GIS))) {
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("mgslpc_isr %s gis=%04X\n", info->device_name,gis);
|
|
|
|
if ((gis & 0x70) || count > 1000) {
|
|
printk("synclink_cs:hardware failed or ejected\n");
|
|
break;
|
|
}
|
|
count++;
|
|
|
|
if (gis & (BIT1 | BIT0)) {
|
|
isr = read_reg16(info, CHB + ISR);
|
|
if (isr & IRQ_DCD)
|
|
dcd_change(info, tty);
|
|
if (isr & IRQ_CTS)
|
|
cts_change(info, tty);
|
|
}
|
|
if (gis & (BIT3 | BIT2))
|
|
{
|
|
isr = read_reg16(info, CHA + ISR);
|
|
if (isr & IRQ_TIMER) {
|
|
info->irq_occurred = true;
|
|
irq_disable(info, CHA, IRQ_TIMER);
|
|
}
|
|
|
|
/* receive IRQs */
|
|
if (isr & IRQ_EXITHUNT) {
|
|
info->icount.exithunt++;
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
}
|
|
if (isr & IRQ_BREAK_ON) {
|
|
info->icount.brk++;
|
|
if (info->port.flags & ASYNC_SAK)
|
|
do_SAK(tty);
|
|
}
|
|
if (isr & IRQ_RXTIME) {
|
|
issue_command(info, CHA, CMD_RXFIFO_READ);
|
|
}
|
|
if (isr & (IRQ_RXEOM | IRQ_RXFIFO)) {
|
|
if (info->params.mode == MGSL_MODE_HDLC)
|
|
rx_ready_hdlc(info, isr & IRQ_RXEOM);
|
|
else
|
|
rx_ready_async(info, isr & IRQ_RXEOM);
|
|
}
|
|
|
|
/* transmit IRQs */
|
|
if (isr & IRQ_UNDERRUN) {
|
|
if (info->tx_aborting)
|
|
info->icount.txabort++;
|
|
else
|
|
info->icount.txunder++;
|
|
tx_done(info, tty);
|
|
}
|
|
else if (isr & IRQ_ALLSENT) {
|
|
info->icount.txok++;
|
|
tx_done(info, tty);
|
|
}
|
|
else if (isr & IRQ_TXFIFO)
|
|
tx_ready(info, tty);
|
|
}
|
|
if (gis & BIT7) {
|
|
pis = read_reg(info, CHA + PIS);
|
|
if (pis & BIT1)
|
|
dsr_change(info);
|
|
if (pis & BIT2)
|
|
ri_change(info);
|
|
}
|
|
}
|
|
|
|
/* Request bottom half processing if there's something
|
|
* for it to do and the bh is not already running
|
|
*/
|
|
|
|
if (info->pending_bh && !info->bh_running && !info->bh_requested) {
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):%s queueing bh task.\n",
|
|
__FILE__,__LINE__,info->device_name);
|
|
schedule_work(&info->task);
|
|
info->bh_requested = true;
|
|
}
|
|
|
|
spin_unlock(&info->lock);
|
|
tty_kref_put(tty);
|
|
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):mgslpc_isr(%d)exit.\n",
|
|
__FILE__, __LINE__, info->irq_level);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* Initialize and start device.
|
|
*/
|
|
static int startup(MGSLPC_INFO * info, struct tty_struct *tty)
|
|
{
|
|
int retval = 0;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):startup(%s)\n", __FILE__, __LINE__, info->device_name);
|
|
|
|
if (info->port.flags & ASYNC_INITIALIZED)
|
|
return 0;
|
|
|
|
if (!info->tx_buf) {
|
|
/* allocate a page of memory for a transmit buffer */
|
|
info->tx_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL);
|
|
if (!info->tx_buf) {
|
|
printk(KERN_ERR"%s(%d):%s can't allocate transmit buffer\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
return -ENOMEM;
|
|
}
|
|
}
|
|
|
|
info->pending_bh = 0;
|
|
|
|
memset(&info->icount, 0, sizeof(info->icount));
|
|
|
|
setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
|
|
|
|
/* Allocate and claim adapter resources */
|
|
retval = claim_resources(info);
|
|
|
|
/* perform existence check and diagnostics */
|
|
if (!retval)
|
|
retval = adapter_test(info);
|
|
|
|
if (retval) {
|
|
if (capable(CAP_SYS_ADMIN) && tty)
|
|
set_bit(TTY_IO_ERROR, &tty->flags);
|
|
release_resources(info);
|
|
return retval;
|
|
}
|
|
|
|
/* program hardware for current parameters */
|
|
mgslpc_change_params(info, tty);
|
|
|
|
if (tty)
|
|
clear_bit(TTY_IO_ERROR, &tty->flags);
|
|
|
|
info->port.flags |= ASYNC_INITIALIZED;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Called by mgslpc_close() and mgslpc_hangup() to shutdown hardware
|
|
*/
|
|
static void shutdown(MGSLPC_INFO * info, struct tty_struct *tty)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (!(info->port.flags & ASYNC_INITIALIZED))
|
|
return;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_shutdown(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
/* clear status wait queue because status changes */
|
|
/* can't happen after shutting down the hardware */
|
|
wake_up_interruptible(&info->status_event_wait_q);
|
|
wake_up_interruptible(&info->event_wait_q);
|
|
|
|
del_timer_sync(&info->tx_timer);
|
|
|
|
if (info->tx_buf) {
|
|
free_page((unsigned long) info->tx_buf);
|
|
info->tx_buf = NULL;
|
|
}
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
|
|
rx_stop(info);
|
|
tx_stop(info);
|
|
|
|
/* TODO:disable interrupts instead of reset to preserve signal states */
|
|
reset_device(info);
|
|
|
|
if (!tty || tty->termios.c_cflag & HUPCL) {
|
|
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
|
|
set_signals(info);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
release_resources(info);
|
|
|
|
if (tty)
|
|
set_bit(TTY_IO_ERROR, &tty->flags);
|
|
|
|
info->port.flags &= ~ASYNC_INITIALIZED;
|
|
}
|
|
|
|
static void mgslpc_program_hw(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
|
|
rx_stop(info);
|
|
tx_stop(info);
|
|
info->tx_count = info->tx_put = info->tx_get = 0;
|
|
|
|
if (info->params.mode == MGSL_MODE_HDLC || info->netcount)
|
|
hdlc_mode(info);
|
|
else
|
|
async_mode(info);
|
|
|
|
set_signals(info);
|
|
|
|
info->dcd_chkcount = 0;
|
|
info->cts_chkcount = 0;
|
|
info->ri_chkcount = 0;
|
|
info->dsr_chkcount = 0;
|
|
|
|
irq_enable(info, CHB, IRQ_DCD | IRQ_CTS);
|
|
port_irq_enable(info, (unsigned char) PVR_DSR | PVR_RI);
|
|
get_signals(info);
|
|
|
|
if (info->netcount || (tty && (tty->termios.c_cflag & CREAD)))
|
|
rx_start(info);
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
|
|
/* Reconfigure adapter based on new parameters
|
|
*/
|
|
static void mgslpc_change_params(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
unsigned cflag;
|
|
int bits_per_char;
|
|
|
|
if (!tty)
|
|
return;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_change_params(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
cflag = tty->termios.c_cflag;
|
|
|
|
/* if B0 rate (hangup) specified then negate RTS and DTR */
|
|
/* otherwise assert RTS and DTR */
|
|
if (cflag & CBAUD)
|
|
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
|
|
else
|
|
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
|
|
|
|
/* byte size and parity */
|
|
|
|
switch (cflag & CSIZE) {
|
|
case CS5: info->params.data_bits = 5; break;
|
|
case CS6: info->params.data_bits = 6; break;
|
|
case CS7: info->params.data_bits = 7; break;
|
|
case CS8: info->params.data_bits = 8; break;
|
|
default: info->params.data_bits = 7; break;
|
|
}
|
|
|
|
if (cflag & CSTOPB)
|
|
info->params.stop_bits = 2;
|
|
else
|
|
info->params.stop_bits = 1;
|
|
|
|
info->params.parity = ASYNC_PARITY_NONE;
|
|
if (cflag & PARENB) {
|
|
if (cflag & PARODD)
|
|
info->params.parity = ASYNC_PARITY_ODD;
|
|
else
|
|
info->params.parity = ASYNC_PARITY_EVEN;
|
|
#ifdef CMSPAR
|
|
if (cflag & CMSPAR)
|
|
info->params.parity = ASYNC_PARITY_SPACE;
|
|
#endif
|
|
}
|
|
|
|
/* calculate number of jiffies to transmit a full
|
|
* FIFO (32 bytes) at specified data rate
|
|
*/
|
|
bits_per_char = info->params.data_bits +
|
|
info->params.stop_bits + 1;
|
|
|
|
/* if port data rate is set to 460800 or less then
|
|
* allow tty settings to override, otherwise keep the
|
|
* current data rate.
|
|
*/
|
|
if (info->params.data_rate <= 460800) {
|
|
info->params.data_rate = tty_get_baud_rate(tty);
|
|
}
|
|
|
|
if (info->params.data_rate) {
|
|
info->timeout = (32*HZ*bits_per_char) /
|
|
info->params.data_rate;
|
|
}
|
|
info->timeout += HZ/50; /* Add .02 seconds of slop */
|
|
|
|
if (cflag & CRTSCTS)
|
|
info->port.flags |= ASYNC_CTS_FLOW;
|
|
else
|
|
info->port.flags &= ~ASYNC_CTS_FLOW;
|
|
|
|
if (cflag & CLOCAL)
|
|
info->port.flags &= ~ASYNC_CHECK_CD;
|
|
else
|
|
info->port.flags |= ASYNC_CHECK_CD;
|
|
|
|
/* process tty input control flags */
|
|
|
|
info->read_status_mask = 0;
|
|
if (I_INPCK(tty))
|
|
info->read_status_mask |= BIT7 | BIT6;
|
|
if (I_IGNPAR(tty))
|
|
info->ignore_status_mask |= BIT7 | BIT6;
|
|
|
|
mgslpc_program_hw(info, tty);
|
|
}
|
|
|
|
/* Add a character to the transmit buffer
|
|
*/
|
|
static int mgslpc_put_char(struct tty_struct *tty, unsigned char ch)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO) {
|
|
printk("%s(%d):mgslpc_put_char(%d) on %s\n",
|
|
__FILE__, __LINE__, ch, info->device_name);
|
|
}
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_put_char"))
|
|
return 0;
|
|
|
|
if (!info->tx_buf)
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
|
|
if (info->params.mode == MGSL_MODE_ASYNC || !info->tx_active) {
|
|
if (info->tx_count < TXBUFSIZE - 1) {
|
|
info->tx_buf[info->tx_put++] = ch;
|
|
info->tx_put &= TXBUFSIZE-1;
|
|
info->tx_count++;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return 1;
|
|
}
|
|
|
|
/* Enable transmitter so remaining characters in the
|
|
* transmit buffer are sent.
|
|
*/
|
|
static void mgslpc_flush_chars(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_flush_chars() entry on %s tx_count=%d\n",
|
|
__FILE__, __LINE__, info->device_name, info->tx_count);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_chars"))
|
|
return;
|
|
|
|
if (info->tx_count <= 0 || tty->stopped ||
|
|
tty->hw_stopped || !info->tx_buf)
|
|
return;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_flush_chars() entry on %s starting transmitter\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (!info->tx_active)
|
|
tx_start(info, tty);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
|
|
/* Send a block of data
|
|
*
|
|
* Arguments:
|
|
*
|
|
* tty pointer to tty information structure
|
|
* buf pointer to buffer containing send data
|
|
* count size of send data in bytes
|
|
*
|
|
* Returns: number of characters written
|
|
*/
|
|
static int mgslpc_write(struct tty_struct * tty,
|
|
const unsigned char *buf, int count)
|
|
{
|
|
int c, ret = 0;
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_write(%s) count=%d\n",
|
|
__FILE__, __LINE__, info->device_name, count);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write") ||
|
|
!info->tx_buf)
|
|
goto cleanup;
|
|
|
|
if (info->params.mode == MGSL_MODE_HDLC) {
|
|
if (count > TXBUFSIZE) {
|
|
ret = -EIO;
|
|
goto cleanup;
|
|
}
|
|
if (info->tx_active)
|
|
goto cleanup;
|
|
else if (info->tx_count)
|
|
goto start;
|
|
}
|
|
|
|
for (;;) {
|
|
c = min(count,
|
|
min(TXBUFSIZE - info->tx_count - 1,
|
|
TXBUFSIZE - info->tx_put));
|
|
if (c <= 0)
|
|
break;
|
|
|
|
memcpy(info->tx_buf + info->tx_put, buf, c);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->tx_put = (info->tx_put + c) & (TXBUFSIZE-1);
|
|
info->tx_count += c;
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
buf += c;
|
|
count -= c;
|
|
ret += c;
|
|
}
|
|
start:
|
|
if (info->tx_count && !tty->stopped && !tty->hw_stopped) {
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (!info->tx_active)
|
|
tx_start(info, tty);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
cleanup:
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_write(%s) returning=%d\n",
|
|
__FILE__, __LINE__, info->device_name, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Return the count of free bytes in transmit buffer
|
|
*/
|
|
static int mgslpc_write_room(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
int ret;
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_write_room"))
|
|
return 0;
|
|
|
|
if (info->params.mode == MGSL_MODE_HDLC) {
|
|
/* HDLC (frame oriented) mode */
|
|
if (info->tx_active)
|
|
return 0;
|
|
else
|
|
return HDLC_MAX_FRAME_SIZE;
|
|
} else {
|
|
ret = TXBUFSIZE - info->tx_count - 1;
|
|
if (ret < 0)
|
|
ret = 0;
|
|
}
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_write_room(%s)=%d\n",
|
|
__FILE__, __LINE__, info->device_name, ret);
|
|
return ret;
|
|
}
|
|
|
|
/* Return the count of bytes in transmit buffer
|
|
*/
|
|
static int mgslpc_chars_in_buffer(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
int rc;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_chars_in_buffer(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_chars_in_buffer"))
|
|
return 0;
|
|
|
|
if (info->params.mode == MGSL_MODE_HDLC)
|
|
rc = info->tx_active ? info->max_frame_size : 0;
|
|
else
|
|
rc = info->tx_count;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_chars_in_buffer(%s)=%d\n",
|
|
__FILE__, __LINE__, info->device_name, rc);
|
|
|
|
return rc;
|
|
}
|
|
|
|
/* Discard all data in the send buffer
|
|
*/
|
|
static void mgslpc_flush_buffer(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_flush_buffer(%s) entry\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_flush_buffer"))
|
|
return;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->tx_count = info->tx_put = info->tx_get = 0;
|
|
del_timer(&info->tx_timer);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
wake_up_interruptible(&tty->write_wait);
|
|
tty_wakeup(tty);
|
|
}
|
|
|
|
/* Send a high-priority XON/XOFF character
|
|
*/
|
|
static void mgslpc_send_xchar(struct tty_struct *tty, char ch)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_send_xchar(%s,%d)\n",
|
|
__FILE__, __LINE__, info->device_name, ch);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_send_xchar"))
|
|
return;
|
|
|
|
info->x_char = ch;
|
|
if (ch) {
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (!info->tx_enabled)
|
|
tx_start(info, tty);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
}
|
|
|
|
/* Signal remote device to throttle send data (our receive data)
|
|
*/
|
|
static void mgslpc_throttle(struct tty_struct * tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_throttle(%s) entry\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_throttle"))
|
|
return;
|
|
|
|
if (I_IXOFF(tty))
|
|
mgslpc_send_xchar(tty, STOP_CHAR(tty));
|
|
|
|
if (tty->termios.c_cflag & CRTSCTS) {
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->serial_signals &= ~SerialSignal_RTS;
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
}
|
|
|
|
/* Signal remote device to stop throttling send data (our receive data)
|
|
*/
|
|
static void mgslpc_unthrottle(struct tty_struct * tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_unthrottle(%s) entry\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_unthrottle"))
|
|
return;
|
|
|
|
if (I_IXOFF(tty)) {
|
|
if (info->x_char)
|
|
info->x_char = 0;
|
|
else
|
|
mgslpc_send_xchar(tty, START_CHAR(tty));
|
|
}
|
|
|
|
if (tty->termios.c_cflag & CRTSCTS) {
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->serial_signals |= SerialSignal_RTS;
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
}
|
|
|
|
/* get the current serial statistics
|
|
*/
|
|
static int get_stats(MGSLPC_INFO * info, struct mgsl_icount __user *user_icount)
|
|
{
|
|
int err;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("get_params(%s)\n", info->device_name);
|
|
if (!user_icount) {
|
|
memset(&info->icount, 0, sizeof(info->icount));
|
|
} else {
|
|
COPY_TO_USER(err, user_icount, &info->icount, sizeof(struct mgsl_icount));
|
|
if (err)
|
|
return -EFAULT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* get the current serial parameters
|
|
*/
|
|
static int get_params(MGSLPC_INFO * info, MGSL_PARAMS __user *user_params)
|
|
{
|
|
int err;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("get_params(%s)\n", info->device_name);
|
|
COPY_TO_USER(err,user_params, &info->params, sizeof(MGSL_PARAMS));
|
|
if (err)
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
/* set the serial parameters
|
|
*
|
|
* Arguments:
|
|
*
|
|
* info pointer to device instance data
|
|
* new_params user buffer containing new serial params
|
|
*
|
|
* Returns: 0 if success, otherwise error code
|
|
*/
|
|
static int set_params(MGSLPC_INFO * info, MGSL_PARAMS __user *new_params, struct tty_struct *tty)
|
|
{
|
|
unsigned long flags;
|
|
MGSL_PARAMS tmp_params;
|
|
int err;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):set_params %s\n", __FILE__,__LINE__,
|
|
info->device_name);
|
|
COPY_FROM_USER(err,&tmp_params, new_params, sizeof(MGSL_PARAMS));
|
|
if (err) {
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):set_params(%s) user buffer copy failed\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
return -EFAULT;
|
|
}
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
memcpy(&info->params,&tmp_params,sizeof(MGSL_PARAMS));
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
mgslpc_change_params(info, tty);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int get_txidle(MGSLPC_INFO * info, int __user *idle_mode)
|
|
{
|
|
int err;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("get_txidle(%s)=%d\n", info->device_name, info->idle_mode);
|
|
COPY_TO_USER(err,idle_mode, &info->idle_mode, sizeof(int));
|
|
if (err)
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int set_txidle(MGSLPC_INFO * info, int idle_mode)
|
|
{
|
|
unsigned long flags;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("set_txidle(%s,%d)\n", info->device_name, idle_mode);
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->idle_mode = idle_mode;
|
|
tx_set_idle(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int get_interface(MGSLPC_INFO * info, int __user *if_mode)
|
|
{
|
|
int err;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("get_interface(%s)=%d\n", info->device_name, info->if_mode);
|
|
COPY_TO_USER(err,if_mode, &info->if_mode, sizeof(int));
|
|
if (err)
|
|
return -EFAULT;
|
|
return 0;
|
|
}
|
|
|
|
static int set_interface(MGSLPC_INFO * info, int if_mode)
|
|
{
|
|
unsigned long flags;
|
|
unsigned char val;
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("set_interface(%s,%d)\n", info->device_name, if_mode);
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->if_mode = if_mode;
|
|
|
|
val = read_reg(info, PVR) & 0x0f;
|
|
switch (info->if_mode)
|
|
{
|
|
case MGSL_INTERFACE_RS232: val |= PVR_RS232; break;
|
|
case MGSL_INTERFACE_V35: val |= PVR_V35; break;
|
|
case MGSL_INTERFACE_RS422: val |= PVR_RS422; break;
|
|
}
|
|
write_reg(info, PVR, val);
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int set_txenable(MGSLPC_INFO * info, int enable, struct tty_struct *tty)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("set_txenable(%s,%d)\n", info->device_name, enable);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (enable) {
|
|
if (!info->tx_enabled)
|
|
tx_start(info, tty);
|
|
} else {
|
|
if (info->tx_enabled)
|
|
tx_stop(info);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int tx_abort(MGSLPC_INFO * info)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("tx_abort(%s)\n", info->device_name);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (info->tx_active && info->tx_count &&
|
|
info->params.mode == MGSL_MODE_HDLC) {
|
|
/* clear data count so FIFO is not filled on next IRQ.
|
|
* This results in underrun and abort transmission.
|
|
*/
|
|
info->tx_count = info->tx_put = info->tx_get = 0;
|
|
info->tx_aborting = true;
|
|
}
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int set_rxenable(MGSLPC_INFO * info, int enable)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("set_rxenable(%s,%d)\n", info->device_name, enable);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (enable) {
|
|
if (!info->rx_enabled)
|
|
rx_start(info);
|
|
} else {
|
|
if (info->rx_enabled)
|
|
rx_stop(info);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/* wait for specified event to occur
|
|
*
|
|
* Arguments: info pointer to device instance data
|
|
* mask pointer to bitmask of events to wait for
|
|
* Return Value: 0 if successful and bit mask updated with
|
|
* of events triggerred,
|
|
* otherwise error code
|
|
*/
|
|
static int wait_events(MGSLPC_INFO * info, int __user *mask_ptr)
|
|
{
|
|
unsigned long flags;
|
|
int s;
|
|
int rc=0;
|
|
struct mgsl_icount cprev, cnow;
|
|
int events;
|
|
int mask;
|
|
struct _input_signal_events oldsigs, newsigs;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
COPY_FROM_USER(rc,&mask, mask_ptr, sizeof(int));
|
|
if (rc)
|
|
return -EFAULT;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("wait_events(%s,%d)\n", info->device_name, mask);
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
|
|
/* return immediately if state matches requested events */
|
|
get_signals(info);
|
|
s = info->serial_signals;
|
|
events = mask &
|
|
( ((s & SerialSignal_DSR) ? MgslEvent_DsrActive:MgslEvent_DsrInactive) +
|
|
((s & SerialSignal_DCD) ? MgslEvent_DcdActive:MgslEvent_DcdInactive) +
|
|
((s & SerialSignal_CTS) ? MgslEvent_CtsActive:MgslEvent_CtsInactive) +
|
|
((s & SerialSignal_RI) ? MgslEvent_RiActive :MgslEvent_RiInactive) );
|
|
if (events) {
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
goto exit;
|
|
}
|
|
|
|
/* save current irq counts */
|
|
cprev = info->icount;
|
|
oldsigs = info->input_signal_events;
|
|
|
|
if ((info->params.mode == MGSL_MODE_HDLC) &&
|
|
(mask & MgslEvent_ExitHuntMode))
|
|
irq_enable(info, CHA, IRQ_EXITHUNT);
|
|
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
add_wait_queue(&info->event_wait_q, &wait);
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
|
|
for(;;) {
|
|
schedule();
|
|
if (signal_pending(current)) {
|
|
rc = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
|
|
/* get current irq counts */
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
cnow = info->icount;
|
|
newsigs = info->input_signal_events;
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
/* if no change, wait aborted for some reason */
|
|
if (newsigs.dsr_up == oldsigs.dsr_up &&
|
|
newsigs.dsr_down == oldsigs.dsr_down &&
|
|
newsigs.dcd_up == oldsigs.dcd_up &&
|
|
newsigs.dcd_down == oldsigs.dcd_down &&
|
|
newsigs.cts_up == oldsigs.cts_up &&
|
|
newsigs.cts_down == oldsigs.cts_down &&
|
|
newsigs.ri_up == oldsigs.ri_up &&
|
|
newsigs.ri_down == oldsigs.ri_down &&
|
|
cnow.exithunt == cprev.exithunt &&
|
|
cnow.rxidle == cprev.rxidle) {
|
|
rc = -EIO;
|
|
break;
|
|
}
|
|
|
|
events = mask &
|
|
( (newsigs.dsr_up != oldsigs.dsr_up ? MgslEvent_DsrActive:0) +
|
|
(newsigs.dsr_down != oldsigs.dsr_down ? MgslEvent_DsrInactive:0) +
|
|
(newsigs.dcd_up != oldsigs.dcd_up ? MgslEvent_DcdActive:0) +
|
|
(newsigs.dcd_down != oldsigs.dcd_down ? MgslEvent_DcdInactive:0) +
|
|
(newsigs.cts_up != oldsigs.cts_up ? MgslEvent_CtsActive:0) +
|
|
(newsigs.cts_down != oldsigs.cts_down ? MgslEvent_CtsInactive:0) +
|
|
(newsigs.ri_up != oldsigs.ri_up ? MgslEvent_RiActive:0) +
|
|
(newsigs.ri_down != oldsigs.ri_down ? MgslEvent_RiInactive:0) +
|
|
(cnow.exithunt != cprev.exithunt ? MgslEvent_ExitHuntMode:0) +
|
|
(cnow.rxidle != cprev.rxidle ? MgslEvent_IdleReceived:0) );
|
|
if (events)
|
|
break;
|
|
|
|
cprev = cnow;
|
|
oldsigs = newsigs;
|
|
}
|
|
|
|
remove_wait_queue(&info->event_wait_q, &wait);
|
|
set_current_state(TASK_RUNNING);
|
|
|
|
if (mask & MgslEvent_ExitHuntMode) {
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (!waitqueue_active(&info->event_wait_q))
|
|
irq_disable(info, CHA, IRQ_EXITHUNT);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
exit:
|
|
if (rc == 0)
|
|
PUT_USER(rc, events, mask_ptr);
|
|
return rc;
|
|
}
|
|
|
|
static int modem_input_wait(MGSLPC_INFO *info,int arg)
|
|
{
|
|
unsigned long flags;
|
|
int rc;
|
|
struct mgsl_icount cprev, cnow;
|
|
DECLARE_WAITQUEUE(wait, current);
|
|
|
|
/* save current irq counts */
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
cprev = info->icount;
|
|
add_wait_queue(&info->status_event_wait_q, &wait);
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
for(;;) {
|
|
schedule();
|
|
if (signal_pending(current)) {
|
|
rc = -ERESTARTSYS;
|
|
break;
|
|
}
|
|
|
|
/* get new irq counts */
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
cnow = info->icount;
|
|
set_current_state(TASK_INTERRUPTIBLE);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
/* if no change, wait aborted for some reason */
|
|
if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
|
|
cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) {
|
|
rc = -EIO;
|
|
break;
|
|
}
|
|
|
|
/* check for change in caller specified modem input */
|
|
if ((arg & TIOCM_RNG && cnow.rng != cprev.rng) ||
|
|
(arg & TIOCM_DSR && cnow.dsr != cprev.dsr) ||
|
|
(arg & TIOCM_CD && cnow.dcd != cprev.dcd) ||
|
|
(arg & TIOCM_CTS && cnow.cts != cprev.cts)) {
|
|
rc = 0;
|
|
break;
|
|
}
|
|
|
|
cprev = cnow;
|
|
}
|
|
remove_wait_queue(&info->status_event_wait_q, &wait);
|
|
set_current_state(TASK_RUNNING);
|
|
return rc;
|
|
}
|
|
|
|
/* return the state of the serial control and status signals
|
|
*/
|
|
static int tiocmget(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned int result;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
result = ((info->serial_signals & SerialSignal_RTS) ? TIOCM_RTS:0) +
|
|
((info->serial_signals & SerialSignal_DTR) ? TIOCM_DTR:0) +
|
|
((info->serial_signals & SerialSignal_DCD) ? TIOCM_CAR:0) +
|
|
((info->serial_signals & SerialSignal_RI) ? TIOCM_RNG:0) +
|
|
((info->serial_signals & SerialSignal_DSR) ? TIOCM_DSR:0) +
|
|
((info->serial_signals & SerialSignal_CTS) ? TIOCM_CTS:0);
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):%s tiocmget() value=%08X\n",
|
|
__FILE__, __LINE__, info->device_name, result);
|
|
return result;
|
|
}
|
|
|
|
/* set modem control signals (DTR/RTS)
|
|
*/
|
|
static int tiocmset(struct tty_struct *tty,
|
|
unsigned int set, unsigned int clear)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):%s tiocmset(%x,%x)\n",
|
|
__FILE__, __LINE__, info->device_name, set, clear);
|
|
|
|
if (set & TIOCM_RTS)
|
|
info->serial_signals |= SerialSignal_RTS;
|
|
if (set & TIOCM_DTR)
|
|
info->serial_signals |= SerialSignal_DTR;
|
|
if (clear & TIOCM_RTS)
|
|
info->serial_signals &= ~SerialSignal_RTS;
|
|
if (clear & TIOCM_DTR)
|
|
info->serial_signals &= ~SerialSignal_DTR;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set or clear transmit break condition
|
|
*
|
|
* Arguments: tty pointer to tty instance data
|
|
* break_state -1=set break condition, 0=clear
|
|
*/
|
|
static int mgslpc_break(struct tty_struct *tty, int break_state)
|
|
{
|
|
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_break(%s,%d)\n",
|
|
__FILE__, __LINE__, info->device_name, break_state);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_break"))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (break_state == -1)
|
|
set_reg_bits(info, CHA+DAFO, BIT6);
|
|
else
|
|
clear_reg_bits(info, CHA+DAFO, BIT6);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int mgslpc_get_icount(struct tty_struct *tty,
|
|
struct serial_icounter_struct *icount)
|
|
{
|
|
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
|
|
struct mgsl_icount cnow; /* kernel counter temps */
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
cnow = info->icount;
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
icount->cts = cnow.cts;
|
|
icount->dsr = cnow.dsr;
|
|
icount->rng = cnow.rng;
|
|
icount->dcd = cnow.dcd;
|
|
icount->rx = cnow.rx;
|
|
icount->tx = cnow.tx;
|
|
icount->frame = cnow.frame;
|
|
icount->overrun = cnow.overrun;
|
|
icount->parity = cnow.parity;
|
|
icount->brk = cnow.brk;
|
|
icount->buf_overrun = cnow.buf_overrun;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Service an IOCTL request
|
|
*
|
|
* Arguments:
|
|
*
|
|
* tty pointer to tty instance data
|
|
* cmd IOCTL command code
|
|
* arg command argument/context
|
|
*
|
|
* Return Value: 0 if success, otherwise error code
|
|
*/
|
|
static int mgslpc_ioctl(struct tty_struct *tty,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
|
|
void __user *argp = (void __user *)arg;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_ioctl %s cmd=%08X\n", __FILE__, __LINE__,
|
|
info->device_name, cmd);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_ioctl"))
|
|
return -ENODEV;
|
|
|
|
if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
|
|
(cmd != TIOCMIWAIT)) {
|
|
if (tty->flags & (1 << TTY_IO_ERROR))
|
|
return -EIO;
|
|
}
|
|
|
|
switch (cmd) {
|
|
case MGSL_IOCGPARAMS:
|
|
return get_params(info, argp);
|
|
case MGSL_IOCSPARAMS:
|
|
return set_params(info, argp, tty);
|
|
case MGSL_IOCGTXIDLE:
|
|
return get_txidle(info, argp);
|
|
case MGSL_IOCSTXIDLE:
|
|
return set_txidle(info, (int)arg);
|
|
case MGSL_IOCGIF:
|
|
return get_interface(info, argp);
|
|
case MGSL_IOCSIF:
|
|
return set_interface(info,(int)arg);
|
|
case MGSL_IOCTXENABLE:
|
|
return set_txenable(info,(int)arg, tty);
|
|
case MGSL_IOCRXENABLE:
|
|
return set_rxenable(info,(int)arg);
|
|
case MGSL_IOCTXABORT:
|
|
return tx_abort(info);
|
|
case MGSL_IOCGSTATS:
|
|
return get_stats(info, argp);
|
|
case MGSL_IOCWAITEVENT:
|
|
return wait_events(info, argp);
|
|
case TIOCMIWAIT:
|
|
return modem_input_wait(info,(int)arg);
|
|
default:
|
|
return -ENOIOCTLCMD;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Set new termios settings
|
|
*
|
|
* Arguments:
|
|
*
|
|
* tty pointer to tty structure
|
|
* termios pointer to buffer to hold returned old termios
|
|
*/
|
|
static void mgslpc_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_set_termios %s\n", __FILE__, __LINE__,
|
|
tty->driver->name);
|
|
|
|
/* just return if nothing has changed */
|
|
if ((tty->termios.c_cflag == old_termios->c_cflag)
|
|
&& (RELEVANT_IFLAG(tty->termios.c_iflag)
|
|
== RELEVANT_IFLAG(old_termios->c_iflag)))
|
|
return;
|
|
|
|
mgslpc_change_params(info, tty);
|
|
|
|
/* Handle transition to B0 status */
|
|
if (old_termios->c_cflag & CBAUD &&
|
|
!(tty->termios.c_cflag & CBAUD)) {
|
|
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
|
|
/* Handle transition away from B0 status */
|
|
if (!(old_termios->c_cflag & CBAUD) &&
|
|
tty->termios.c_cflag & CBAUD) {
|
|
info->serial_signals |= SerialSignal_DTR;
|
|
if (!(tty->termios.c_cflag & CRTSCTS) ||
|
|
!test_bit(TTY_THROTTLED, &tty->flags)) {
|
|
info->serial_signals |= SerialSignal_RTS;
|
|
}
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
|
|
/* Handle turning off CRTSCTS */
|
|
if (old_termios->c_cflag & CRTSCTS &&
|
|
!(tty->termios.c_cflag & CRTSCTS)) {
|
|
tty->hw_stopped = 0;
|
|
tx_release(tty);
|
|
}
|
|
}
|
|
|
|
static void mgslpc_close(struct tty_struct *tty, struct file * filp)
|
|
{
|
|
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
|
|
struct tty_port *port = &info->port;
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_close"))
|
|
return;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_close(%s) entry, count=%d\n",
|
|
__FILE__, __LINE__, info->device_name, port->count);
|
|
|
|
if (tty_port_close_start(port, tty, filp) == 0)
|
|
goto cleanup;
|
|
|
|
if (port->flags & ASYNC_INITIALIZED)
|
|
mgslpc_wait_until_sent(tty, info->timeout);
|
|
|
|
mgslpc_flush_buffer(tty);
|
|
|
|
tty_ldisc_flush(tty);
|
|
shutdown(info, tty);
|
|
|
|
tty_port_close_end(port, tty);
|
|
tty_port_tty_set(port, NULL);
|
|
cleanup:
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_close(%s) exit, count=%d\n", __FILE__, __LINE__,
|
|
tty->driver->name, port->count);
|
|
}
|
|
|
|
/* Wait until the transmitter is empty.
|
|
*/
|
|
static void mgslpc_wait_until_sent(struct tty_struct *tty, int timeout)
|
|
{
|
|
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
|
|
unsigned long orig_jiffies, char_time;
|
|
|
|
if (!info)
|
|
return;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_wait_until_sent(%s) entry\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_wait_until_sent"))
|
|
return;
|
|
|
|
if (!(info->port.flags & ASYNC_INITIALIZED))
|
|
goto exit;
|
|
|
|
orig_jiffies = jiffies;
|
|
|
|
/* Set check interval to 1/5 of estimated time to
|
|
* send a character, and make it at least 1. The check
|
|
* interval should also be less than the timeout.
|
|
* Note: use tight timings here to satisfy the NIST-PCTS.
|
|
*/
|
|
|
|
if (info->params.data_rate) {
|
|
char_time = info->timeout/(32 * 5);
|
|
if (!char_time)
|
|
char_time++;
|
|
} else
|
|
char_time = 1;
|
|
|
|
if (timeout)
|
|
char_time = min_t(unsigned long, char_time, timeout);
|
|
|
|
if (info->params.mode == MGSL_MODE_HDLC) {
|
|
while (info->tx_active) {
|
|
msleep_interruptible(jiffies_to_msecs(char_time));
|
|
if (signal_pending(current))
|
|
break;
|
|
if (timeout && time_after(jiffies, orig_jiffies + timeout))
|
|
break;
|
|
}
|
|
} else {
|
|
while ((info->tx_count || info->tx_active) &&
|
|
info->tx_enabled) {
|
|
msleep_interruptible(jiffies_to_msecs(char_time));
|
|
if (signal_pending(current))
|
|
break;
|
|
if (timeout && time_after(jiffies, orig_jiffies + timeout))
|
|
break;
|
|
}
|
|
}
|
|
|
|
exit:
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_wait_until_sent(%s) exit\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
}
|
|
|
|
/* Called by tty_hangup() when a hangup is signaled.
|
|
* This is the same as closing all open files for the port.
|
|
*/
|
|
static void mgslpc_hangup(struct tty_struct *tty)
|
|
{
|
|
MGSLPC_INFO * info = (MGSLPC_INFO *)tty->driver_data;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_hangup(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_hangup"))
|
|
return;
|
|
|
|
mgslpc_flush_buffer(tty);
|
|
shutdown(info, tty);
|
|
tty_port_hangup(&info->port);
|
|
}
|
|
|
|
static int carrier_raised(struct tty_port *port)
|
|
{
|
|
MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
if (info->serial_signals & SerialSignal_DCD)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
static void dtr_rts(struct tty_port *port, int onoff)
|
|
{
|
|
MGSLPC_INFO *info = container_of(port, MGSLPC_INFO, port);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (onoff)
|
|
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
|
|
else
|
|
info->serial_signals &= ~(SerialSignal_RTS | SerialSignal_DTR);
|
|
set_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
}
|
|
|
|
|
|
static int mgslpc_open(struct tty_struct *tty, struct file * filp)
|
|
{
|
|
MGSLPC_INFO *info;
|
|
struct tty_port *port;
|
|
int retval, line;
|
|
unsigned long flags;
|
|
|
|
/* verify range of specified line number */
|
|
line = tty->index;
|
|
if (line >= mgslpc_device_count) {
|
|
printk("%s(%d):mgslpc_open with invalid line #%d.\n",
|
|
__FILE__, __LINE__, line);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* find the info structure for the specified line */
|
|
info = mgslpc_device_list;
|
|
while(info && info->line != line)
|
|
info = info->next_device;
|
|
if (mgslpc_paranoia_check(info, tty->name, "mgslpc_open"))
|
|
return -ENODEV;
|
|
|
|
port = &info->port;
|
|
tty->driver_data = info;
|
|
tty_port_tty_set(port, tty);
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_open(%s), old ref count = %d\n",
|
|
__FILE__, __LINE__, tty->driver->name, port->count);
|
|
|
|
/* If port is closing, signal caller to try again */
|
|
if (port->flags & ASYNC_CLOSING){
|
|
wait_event_interruptible_tty(tty, port->close_wait,
|
|
!(port->flags & ASYNC_CLOSING));
|
|
retval = ((port->flags & ASYNC_HUP_NOTIFY) ?
|
|
-EAGAIN : -ERESTARTSYS);
|
|
goto cleanup;
|
|
}
|
|
|
|
port->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
|
|
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
if (info->netcount) {
|
|
retval = -EBUSY;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
goto cleanup;
|
|
}
|
|
spin_lock(&port->lock);
|
|
port->count++;
|
|
spin_unlock(&port->lock);
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
|
|
if (port->count == 1) {
|
|
/* 1st open on this device, init hardware */
|
|
retval = startup(info, tty);
|
|
if (retval < 0)
|
|
goto cleanup;
|
|
}
|
|
|
|
retval = tty_port_block_til_ready(&info->port, tty, filp);
|
|
if (retval) {
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):block_til_ready(%s) returned %d\n",
|
|
__FILE__, __LINE__, info->device_name, retval);
|
|
goto cleanup;
|
|
}
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):mgslpc_open(%s) success\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
retval = 0;
|
|
|
|
cleanup:
|
|
return retval;
|
|
}
|
|
|
|
/*
|
|
* /proc fs routines....
|
|
*/
|
|
|
|
static inline void line_info(struct seq_file *m, MGSLPC_INFO *info)
|
|
{
|
|
char stat_buf[30];
|
|
unsigned long flags;
|
|
|
|
seq_printf(m, "%s:io:%04X irq:%d",
|
|
info->device_name, info->io_base, info->irq_level);
|
|
|
|
/* output current serial signal states */
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
stat_buf[0] = 0;
|
|
stat_buf[1] = 0;
|
|
if (info->serial_signals & SerialSignal_RTS)
|
|
strcat(stat_buf, "|RTS");
|
|
if (info->serial_signals & SerialSignal_CTS)
|
|
strcat(stat_buf, "|CTS");
|
|
if (info->serial_signals & SerialSignal_DTR)
|
|
strcat(stat_buf, "|DTR");
|
|
if (info->serial_signals & SerialSignal_DSR)
|
|
strcat(stat_buf, "|DSR");
|
|
if (info->serial_signals & SerialSignal_DCD)
|
|
strcat(stat_buf, "|CD");
|
|
if (info->serial_signals & SerialSignal_RI)
|
|
strcat(stat_buf, "|RI");
|
|
|
|
if (info->params.mode == MGSL_MODE_HDLC) {
|
|
seq_printf(m, " HDLC txok:%d rxok:%d",
|
|
info->icount.txok, info->icount.rxok);
|
|
if (info->icount.txunder)
|
|
seq_printf(m, " txunder:%d", info->icount.txunder);
|
|
if (info->icount.txabort)
|
|
seq_printf(m, " txabort:%d", info->icount.txabort);
|
|
if (info->icount.rxshort)
|
|
seq_printf(m, " rxshort:%d", info->icount.rxshort);
|
|
if (info->icount.rxlong)
|
|
seq_printf(m, " rxlong:%d", info->icount.rxlong);
|
|
if (info->icount.rxover)
|
|
seq_printf(m, " rxover:%d", info->icount.rxover);
|
|
if (info->icount.rxcrc)
|
|
seq_printf(m, " rxcrc:%d", info->icount.rxcrc);
|
|
} else {
|
|
seq_printf(m, " ASYNC tx:%d rx:%d",
|
|
info->icount.tx, info->icount.rx);
|
|
if (info->icount.frame)
|
|
seq_printf(m, " fe:%d", info->icount.frame);
|
|
if (info->icount.parity)
|
|
seq_printf(m, " pe:%d", info->icount.parity);
|
|
if (info->icount.brk)
|
|
seq_printf(m, " brk:%d", info->icount.brk);
|
|
if (info->icount.overrun)
|
|
seq_printf(m, " oe:%d", info->icount.overrun);
|
|
}
|
|
|
|
/* Append serial signal status to end */
|
|
seq_printf(m, " %s\n", stat_buf+1);
|
|
|
|
seq_printf(m, "txactive=%d bh_req=%d bh_run=%d pending_bh=%x\n",
|
|
info->tx_active,info->bh_requested,info->bh_running,
|
|
info->pending_bh);
|
|
}
|
|
|
|
/* Called to print information about devices
|
|
*/
|
|
static int mgslpc_proc_show(struct seq_file *m, void *v)
|
|
{
|
|
MGSLPC_INFO *info;
|
|
|
|
seq_printf(m, "synclink driver:%s\n", driver_version);
|
|
|
|
info = mgslpc_device_list;
|
|
while (info) {
|
|
line_info(m, info);
|
|
info = info->next_device;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int mgslpc_proc_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, mgslpc_proc_show, NULL);
|
|
}
|
|
|
|
static const struct file_operations mgslpc_proc_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = mgslpc_proc_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
};
|
|
|
|
static int rx_alloc_buffers(MGSLPC_INFO *info)
|
|
{
|
|
/* each buffer has header and data */
|
|
info->rx_buf_size = sizeof(RXBUF) + info->max_frame_size;
|
|
|
|
/* calculate total allocation size for 8 buffers */
|
|
info->rx_buf_total_size = info->rx_buf_size * 8;
|
|
|
|
/* limit total allocated memory */
|
|
if (info->rx_buf_total_size > 0x10000)
|
|
info->rx_buf_total_size = 0x10000;
|
|
|
|
/* calculate number of buffers */
|
|
info->rx_buf_count = info->rx_buf_total_size / info->rx_buf_size;
|
|
|
|
info->rx_buf = kmalloc(info->rx_buf_total_size, GFP_KERNEL);
|
|
if (info->rx_buf == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* unused flag buffer to satisfy receive_buf calling interface */
|
|
info->flag_buf = kzalloc(info->max_frame_size, GFP_KERNEL);
|
|
if (!info->flag_buf) {
|
|
kfree(info->rx_buf);
|
|
info->rx_buf = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rx_reset_buffers(info);
|
|
return 0;
|
|
}
|
|
|
|
static void rx_free_buffers(MGSLPC_INFO *info)
|
|
{
|
|
kfree(info->rx_buf);
|
|
info->rx_buf = NULL;
|
|
kfree(info->flag_buf);
|
|
info->flag_buf = NULL;
|
|
}
|
|
|
|
static int claim_resources(MGSLPC_INFO *info)
|
|
{
|
|
if (rx_alloc_buffers(info) < 0) {
|
|
printk("Can't allocate rx buffer %s\n", info->device_name);
|
|
release_resources(info);
|
|
return -ENODEV;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void release_resources(MGSLPC_INFO *info)
|
|
{
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("release_resources(%s)\n", info->device_name);
|
|
rx_free_buffers(info);
|
|
}
|
|
|
|
/* Add the specified device instance data structure to the
|
|
* global linked list of devices and increment the device count.
|
|
*
|
|
* Arguments: info pointer to device instance data
|
|
*/
|
|
static int mgslpc_add_device(MGSLPC_INFO *info)
|
|
{
|
|
MGSLPC_INFO *current_dev = NULL;
|
|
struct device *tty_dev;
|
|
int ret;
|
|
|
|
info->next_device = NULL;
|
|
info->line = mgslpc_device_count;
|
|
sprintf(info->device_name,"ttySLP%d",info->line);
|
|
|
|
if (info->line < MAX_DEVICE_COUNT) {
|
|
if (maxframe[info->line])
|
|
info->max_frame_size = maxframe[info->line];
|
|
}
|
|
|
|
mgslpc_device_count++;
|
|
|
|
if (!mgslpc_device_list)
|
|
mgslpc_device_list = info;
|
|
else {
|
|
current_dev = mgslpc_device_list;
|
|
while (current_dev->next_device)
|
|
current_dev = current_dev->next_device;
|
|
current_dev->next_device = info;
|
|
}
|
|
|
|
if (info->max_frame_size < 4096)
|
|
info->max_frame_size = 4096;
|
|
else if (info->max_frame_size > 65535)
|
|
info->max_frame_size = 65535;
|
|
|
|
printk("SyncLink PC Card %s:IO=%04X IRQ=%d\n",
|
|
info->device_name, info->io_base, info->irq_level);
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
ret = hdlcdev_init(info);
|
|
if (ret != 0)
|
|
goto failed;
|
|
#endif
|
|
|
|
tty_dev = tty_port_register_device(&info->port, serial_driver, info->line,
|
|
&info->p_dev->dev);
|
|
if (IS_ERR(tty_dev)) {
|
|
ret = PTR_ERR(tty_dev);
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
hdlcdev_exit(info);
|
|
#endif
|
|
goto failed;
|
|
}
|
|
|
|
return 0;
|
|
|
|
failed:
|
|
if (current_dev)
|
|
current_dev->next_device = NULL;
|
|
else
|
|
mgslpc_device_list = NULL;
|
|
mgslpc_device_count--;
|
|
return ret;
|
|
}
|
|
|
|
static void mgslpc_remove_device(MGSLPC_INFO *remove_info)
|
|
{
|
|
MGSLPC_INFO *info = mgslpc_device_list;
|
|
MGSLPC_INFO *last = NULL;
|
|
|
|
while(info) {
|
|
if (info == remove_info) {
|
|
if (last)
|
|
last->next_device = info->next_device;
|
|
else
|
|
mgslpc_device_list = info->next_device;
|
|
tty_unregister_device(serial_driver, info->line);
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
hdlcdev_exit(info);
|
|
#endif
|
|
release_resources(info);
|
|
tty_port_destroy(&info->port);
|
|
kfree(info);
|
|
mgslpc_device_count--;
|
|
return;
|
|
}
|
|
last = info;
|
|
info = info->next_device;
|
|
}
|
|
}
|
|
|
|
static const struct pcmcia_device_id mgslpc_ids[] = {
|
|
PCMCIA_DEVICE_MANF_CARD(0x02c5, 0x0050),
|
|
PCMCIA_DEVICE_NULL
|
|
};
|
|
MODULE_DEVICE_TABLE(pcmcia, mgslpc_ids);
|
|
|
|
static struct pcmcia_driver mgslpc_driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = "synclink_cs",
|
|
.probe = mgslpc_probe,
|
|
.remove = mgslpc_detach,
|
|
.id_table = mgslpc_ids,
|
|
.suspend = mgslpc_suspend,
|
|
.resume = mgslpc_resume,
|
|
};
|
|
|
|
static const struct tty_operations mgslpc_ops = {
|
|
.open = mgslpc_open,
|
|
.close = mgslpc_close,
|
|
.write = mgslpc_write,
|
|
.put_char = mgslpc_put_char,
|
|
.flush_chars = mgslpc_flush_chars,
|
|
.write_room = mgslpc_write_room,
|
|
.chars_in_buffer = mgslpc_chars_in_buffer,
|
|
.flush_buffer = mgslpc_flush_buffer,
|
|
.ioctl = mgslpc_ioctl,
|
|
.throttle = mgslpc_throttle,
|
|
.unthrottle = mgslpc_unthrottle,
|
|
.send_xchar = mgslpc_send_xchar,
|
|
.break_ctl = mgslpc_break,
|
|
.wait_until_sent = mgslpc_wait_until_sent,
|
|
.set_termios = mgslpc_set_termios,
|
|
.stop = tx_pause,
|
|
.start = tx_release,
|
|
.hangup = mgslpc_hangup,
|
|
.tiocmget = tiocmget,
|
|
.tiocmset = tiocmset,
|
|
.get_icount = mgslpc_get_icount,
|
|
.proc_fops = &mgslpc_proc_fops,
|
|
};
|
|
|
|
static int __init synclink_cs_init(void)
|
|
{
|
|
int rc;
|
|
|
|
if (break_on_load) {
|
|
mgslpc_get_text_ptr();
|
|
BREAKPOINT();
|
|
}
|
|
|
|
serial_driver = tty_alloc_driver(MAX_DEVICE_COUNT,
|
|
TTY_DRIVER_REAL_RAW |
|
|
TTY_DRIVER_DYNAMIC_DEV);
|
|
if (IS_ERR(serial_driver)) {
|
|
rc = PTR_ERR(serial_driver);
|
|
goto err;
|
|
}
|
|
|
|
/* Initialize the tty_driver structure */
|
|
serial_driver->driver_name = "synclink_cs";
|
|
serial_driver->name = "ttySLP";
|
|
serial_driver->major = ttymajor;
|
|
serial_driver->minor_start = 64;
|
|
serial_driver->type = TTY_DRIVER_TYPE_SERIAL;
|
|
serial_driver->subtype = SERIAL_TYPE_NORMAL;
|
|
serial_driver->init_termios = tty_std_termios;
|
|
serial_driver->init_termios.c_cflag =
|
|
B9600 | CS8 | CREAD | HUPCL | CLOCAL;
|
|
tty_set_operations(serial_driver, &mgslpc_ops);
|
|
|
|
rc = tty_register_driver(serial_driver);
|
|
if (rc < 0) {
|
|
printk(KERN_ERR "%s(%d):Couldn't register serial driver\n",
|
|
__FILE__, __LINE__);
|
|
goto err_put_tty;
|
|
}
|
|
|
|
rc = pcmcia_register_driver(&mgslpc_driver);
|
|
if (rc < 0)
|
|
goto err_unreg_tty;
|
|
|
|
printk(KERN_INFO "%s %s, tty major#%d\n", driver_name, driver_version,
|
|
serial_driver->major);
|
|
|
|
return 0;
|
|
err_unreg_tty:
|
|
tty_unregister_driver(serial_driver);
|
|
err_put_tty:
|
|
put_tty_driver(serial_driver);
|
|
err:
|
|
return rc;
|
|
}
|
|
|
|
static void __exit synclink_cs_exit(void)
|
|
{
|
|
pcmcia_unregister_driver(&mgslpc_driver);
|
|
tty_unregister_driver(serial_driver);
|
|
put_tty_driver(serial_driver);
|
|
}
|
|
|
|
module_init(synclink_cs_init);
|
|
module_exit(synclink_cs_exit);
|
|
|
|
static void mgslpc_set_rate(MGSLPC_INFO *info, unsigned char channel, unsigned int rate)
|
|
{
|
|
unsigned int M, N;
|
|
unsigned char val;
|
|
|
|
/* note:standard BRG mode is broken in V3.2 chip
|
|
* so enhanced mode is always used
|
|
*/
|
|
|
|
if (rate) {
|
|
N = 3686400 / rate;
|
|
if (!N)
|
|
N = 1;
|
|
N >>= 1;
|
|
for (M = 1; N > 64 && M < 16; M++)
|
|
N >>= 1;
|
|
N--;
|
|
|
|
/* BGR[5..0] = N
|
|
* BGR[9..6] = M
|
|
* BGR[7..0] contained in BGR register
|
|
* BGR[9..8] contained in CCR2[7..6]
|
|
* divisor = (N+1)*2^M
|
|
*
|
|
* Note: M *must* not be zero (causes asymetric duty cycle)
|
|
*/
|
|
write_reg(info, (unsigned char) (channel + BGR),
|
|
(unsigned char) ((M << 6) + N));
|
|
val = read_reg(info, (unsigned char) (channel + CCR2)) & 0x3f;
|
|
val |= ((M << 4) & 0xc0);
|
|
write_reg(info, (unsigned char) (channel + CCR2), val);
|
|
}
|
|
}
|
|
|
|
/* Enabled the AUX clock output at the specified frequency.
|
|
*/
|
|
static void enable_auxclk(MGSLPC_INFO *info)
|
|
{
|
|
unsigned char val;
|
|
|
|
/* MODE
|
|
*
|
|
* 07..06 MDS[1..0] 10 = transparent HDLC mode
|
|
* 05 ADM Address Mode, 0 = no addr recognition
|
|
* 04 TMD Timer Mode, 0 = external
|
|
* 03 RAC Receiver Active, 0 = inactive
|
|
* 02 RTS 0=RTS active during xmit, 1=RTS always active
|
|
* 01 TRS Timer Resolution, 1=512
|
|
* 00 TLP Test Loop, 0 = no loop
|
|
*
|
|
* 1000 0010
|
|
*/
|
|
val = 0x82;
|
|
|
|
/* channel B RTS is used to enable AUXCLK driver on SP505 */
|
|
if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
|
|
val |= BIT2;
|
|
write_reg(info, CHB + MODE, val);
|
|
|
|
/* CCR0
|
|
*
|
|
* 07 PU Power Up, 1=active, 0=power down
|
|
* 06 MCE Master Clock Enable, 1=enabled
|
|
* 05 Reserved, 0
|
|
* 04..02 SC[2..0] Encoding
|
|
* 01..00 SM[1..0] Serial Mode, 00=HDLC
|
|
*
|
|
* 11000000
|
|
*/
|
|
write_reg(info, CHB + CCR0, 0xc0);
|
|
|
|
/* CCR1
|
|
*
|
|
* 07 SFLG Shared Flag, 0 = disable shared flags
|
|
* 06 GALP Go Active On Loop, 0 = not used
|
|
* 05 GLP Go On Loop, 0 = not used
|
|
* 04 ODS Output Driver Select, 1=TxD is push-pull output
|
|
* 03 ITF Interframe Time Fill, 0=mark, 1=flag
|
|
* 02..00 CM[2..0] Clock Mode
|
|
*
|
|
* 0001 0111
|
|
*/
|
|
write_reg(info, CHB + CCR1, 0x17);
|
|
|
|
/* CCR2 (Channel B)
|
|
*
|
|
* 07..06 BGR[9..8] Baud rate bits 9..8
|
|
* 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
|
|
* 04 SSEL Clock source select, 1=submode b
|
|
* 03 TOE 0=TxCLK is input, 1=TxCLK is output
|
|
* 02 RWX Read/Write Exchange 0=disabled
|
|
* 01 C32, CRC select, 0=CRC-16, 1=CRC-32
|
|
* 00 DIV, data inversion 0=disabled, 1=enabled
|
|
*
|
|
* 0011 1000
|
|
*/
|
|
if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
|
|
write_reg(info, CHB + CCR2, 0x38);
|
|
else
|
|
write_reg(info, CHB + CCR2, 0x30);
|
|
|
|
/* CCR4
|
|
*
|
|
* 07 MCK4 Master Clock Divide by 4, 1=enabled
|
|
* 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
|
|
* 05 TST1 Test Pin, 0=normal operation
|
|
* 04 ICD Ivert Carrier Detect, 1=enabled (active low)
|
|
* 03..02 Reserved, must be 0
|
|
* 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
|
|
*
|
|
* 0101 0000
|
|
*/
|
|
write_reg(info, CHB + CCR4, 0x50);
|
|
|
|
/* if auxclk not enabled, set internal BRG so
|
|
* CTS transitions can be detected (requires TxC)
|
|
*/
|
|
if (info->params.mode == MGSL_MODE_HDLC && info->params.clock_speed)
|
|
mgslpc_set_rate(info, CHB, info->params.clock_speed);
|
|
else
|
|
mgslpc_set_rate(info, CHB, 921600);
|
|
}
|
|
|
|
static void loopback_enable(MGSLPC_INFO *info)
|
|
{
|
|
unsigned char val;
|
|
|
|
/* CCR1:02..00 CM[2..0] Clock Mode = 111 (clock mode 7) */
|
|
val = read_reg(info, CHA + CCR1) | (BIT2 | BIT1 | BIT0);
|
|
write_reg(info, CHA + CCR1, val);
|
|
|
|
/* CCR2:04 SSEL Clock source select, 1=submode b */
|
|
val = read_reg(info, CHA + CCR2) | (BIT4 | BIT5);
|
|
write_reg(info, CHA + CCR2, val);
|
|
|
|
/* set LinkSpeed if available, otherwise default to 2Mbps */
|
|
if (info->params.clock_speed)
|
|
mgslpc_set_rate(info, CHA, info->params.clock_speed);
|
|
else
|
|
mgslpc_set_rate(info, CHA, 1843200);
|
|
|
|
/* MODE:00 TLP Test Loop, 1=loopback enabled */
|
|
val = read_reg(info, CHA + MODE) | BIT0;
|
|
write_reg(info, CHA + MODE, val);
|
|
}
|
|
|
|
static void hdlc_mode(MGSLPC_INFO *info)
|
|
{
|
|
unsigned char val;
|
|
unsigned char clkmode, clksubmode;
|
|
|
|
/* disable all interrupts */
|
|
irq_disable(info, CHA, 0xffff);
|
|
irq_disable(info, CHB, 0xffff);
|
|
port_irq_disable(info, 0xff);
|
|
|
|
/* assume clock mode 0a, rcv=RxC xmt=TxC */
|
|
clkmode = clksubmode = 0;
|
|
if (info->params.flags & HDLC_FLAG_RXC_DPLL
|
|
&& info->params.flags & HDLC_FLAG_TXC_DPLL) {
|
|
/* clock mode 7a, rcv = DPLL, xmt = DPLL */
|
|
clkmode = 7;
|
|
} else if (info->params.flags & HDLC_FLAG_RXC_BRG
|
|
&& info->params.flags & HDLC_FLAG_TXC_BRG) {
|
|
/* clock mode 7b, rcv = BRG, xmt = BRG */
|
|
clkmode = 7;
|
|
clksubmode = 1;
|
|
} else if (info->params.flags & HDLC_FLAG_RXC_DPLL) {
|
|
if (info->params.flags & HDLC_FLAG_TXC_BRG) {
|
|
/* clock mode 6b, rcv = DPLL, xmt = BRG/16 */
|
|
clkmode = 6;
|
|
clksubmode = 1;
|
|
} else {
|
|
/* clock mode 6a, rcv = DPLL, xmt = TxC */
|
|
clkmode = 6;
|
|
}
|
|
} else if (info->params.flags & HDLC_FLAG_TXC_BRG) {
|
|
/* clock mode 0b, rcv = RxC, xmt = BRG */
|
|
clksubmode = 1;
|
|
}
|
|
|
|
/* MODE
|
|
*
|
|
* 07..06 MDS[1..0] 10 = transparent HDLC mode
|
|
* 05 ADM Address Mode, 0 = no addr recognition
|
|
* 04 TMD Timer Mode, 0 = external
|
|
* 03 RAC Receiver Active, 0 = inactive
|
|
* 02 RTS 0=RTS active during xmit, 1=RTS always active
|
|
* 01 TRS Timer Resolution, 1=512
|
|
* 00 TLP Test Loop, 0 = no loop
|
|
*
|
|
* 1000 0010
|
|
*/
|
|
val = 0x82;
|
|
if (info->params.loopback)
|
|
val |= BIT0;
|
|
|
|
/* preserve RTS state */
|
|
if (info->serial_signals & SerialSignal_RTS)
|
|
val |= BIT2;
|
|
write_reg(info, CHA + MODE, val);
|
|
|
|
/* CCR0
|
|
*
|
|
* 07 PU Power Up, 1=active, 0=power down
|
|
* 06 MCE Master Clock Enable, 1=enabled
|
|
* 05 Reserved, 0
|
|
* 04..02 SC[2..0] Encoding
|
|
* 01..00 SM[1..0] Serial Mode, 00=HDLC
|
|
*
|
|
* 11000000
|
|
*/
|
|
val = 0xc0;
|
|
switch (info->params.encoding)
|
|
{
|
|
case HDLC_ENCODING_NRZI:
|
|
val |= BIT3;
|
|
break;
|
|
case HDLC_ENCODING_BIPHASE_SPACE:
|
|
val |= BIT4;
|
|
break; // FM0
|
|
case HDLC_ENCODING_BIPHASE_MARK:
|
|
val |= BIT4 | BIT2;
|
|
break; // FM1
|
|
case HDLC_ENCODING_BIPHASE_LEVEL:
|
|
val |= BIT4 | BIT3;
|
|
break; // Manchester
|
|
}
|
|
write_reg(info, CHA + CCR0, val);
|
|
|
|
/* CCR1
|
|
*
|
|
* 07 SFLG Shared Flag, 0 = disable shared flags
|
|
* 06 GALP Go Active On Loop, 0 = not used
|
|
* 05 GLP Go On Loop, 0 = not used
|
|
* 04 ODS Output Driver Select, 1=TxD is push-pull output
|
|
* 03 ITF Interframe Time Fill, 0=mark, 1=flag
|
|
* 02..00 CM[2..0] Clock Mode
|
|
*
|
|
* 0001 0000
|
|
*/
|
|
val = 0x10 + clkmode;
|
|
write_reg(info, CHA + CCR1, val);
|
|
|
|
/* CCR2
|
|
*
|
|
* 07..06 BGR[9..8] Baud rate bits 9..8
|
|
* 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
|
|
* 04 SSEL Clock source select, 1=submode b
|
|
* 03 TOE 0=TxCLK is input, 0=TxCLK is input
|
|
* 02 RWX Read/Write Exchange 0=disabled
|
|
* 01 C32, CRC select, 0=CRC-16, 1=CRC-32
|
|
* 00 DIV, data inversion 0=disabled, 1=enabled
|
|
*
|
|
* 0000 0000
|
|
*/
|
|
val = 0x00;
|
|
if (clkmode == 2 || clkmode == 3 || clkmode == 6
|
|
|| clkmode == 7 || (clkmode == 0 && clksubmode == 1))
|
|
val |= BIT5;
|
|
if (clksubmode)
|
|
val |= BIT4;
|
|
if (info->params.crc_type == HDLC_CRC_32_CCITT)
|
|
val |= BIT1;
|
|
if (info->params.encoding == HDLC_ENCODING_NRZB)
|
|
val |= BIT0;
|
|
write_reg(info, CHA + CCR2, val);
|
|
|
|
/* CCR3
|
|
*
|
|
* 07..06 PRE[1..0] Preamble count 00=1, 01=2, 10=4, 11=8
|
|
* 05 EPT Enable preamble transmission, 1=enabled
|
|
* 04 RADD Receive address pushed to FIFO, 0=disabled
|
|
* 03 CRL CRC Reset Level, 0=FFFF
|
|
* 02 RCRC Rx CRC 0=On 1=Off
|
|
* 01 TCRC Tx CRC 0=On 1=Off
|
|
* 00 PSD DPLL Phase Shift Disable
|
|
*
|
|
* 0000 0000
|
|
*/
|
|
val = 0x00;
|
|
if (info->params.crc_type == HDLC_CRC_NONE)
|
|
val |= BIT2 | BIT1;
|
|
if (info->params.preamble != HDLC_PREAMBLE_PATTERN_NONE)
|
|
val |= BIT5;
|
|
switch (info->params.preamble_length)
|
|
{
|
|
case HDLC_PREAMBLE_LENGTH_16BITS:
|
|
val |= BIT6;
|
|
break;
|
|
case HDLC_PREAMBLE_LENGTH_32BITS:
|
|
val |= BIT6;
|
|
break;
|
|
case HDLC_PREAMBLE_LENGTH_64BITS:
|
|
val |= BIT7 | BIT6;
|
|
break;
|
|
}
|
|
write_reg(info, CHA + CCR3, val);
|
|
|
|
/* PRE - Preamble pattern */
|
|
val = 0;
|
|
switch (info->params.preamble)
|
|
{
|
|
case HDLC_PREAMBLE_PATTERN_FLAGS: val = 0x7e; break;
|
|
case HDLC_PREAMBLE_PATTERN_10: val = 0xaa; break;
|
|
case HDLC_PREAMBLE_PATTERN_01: val = 0x55; break;
|
|
case HDLC_PREAMBLE_PATTERN_ONES: val = 0xff; break;
|
|
}
|
|
write_reg(info, CHA + PRE, val);
|
|
|
|
/* CCR4
|
|
*
|
|
* 07 MCK4 Master Clock Divide by 4, 1=enabled
|
|
* 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
|
|
* 05 TST1 Test Pin, 0=normal operation
|
|
* 04 ICD Ivert Carrier Detect, 1=enabled (active low)
|
|
* 03..02 Reserved, must be 0
|
|
* 01..00 RFT[1..0] RxFIFO Threshold 00=32 bytes
|
|
*
|
|
* 0101 0000
|
|
*/
|
|
val = 0x50;
|
|
write_reg(info, CHA + CCR4, val);
|
|
if (info->params.flags & HDLC_FLAG_RXC_DPLL)
|
|
mgslpc_set_rate(info, CHA, info->params.clock_speed * 16);
|
|
else
|
|
mgslpc_set_rate(info, CHA, info->params.clock_speed);
|
|
|
|
/* RLCR Receive length check register
|
|
*
|
|
* 7 1=enable receive length check
|
|
* 6..0 Max frame length = (RL + 1) * 32
|
|
*/
|
|
write_reg(info, CHA + RLCR, 0);
|
|
|
|
/* XBCH Transmit Byte Count High
|
|
*
|
|
* 07 DMA mode, 0 = interrupt driven
|
|
* 06 NRM, 0=ABM (ignored)
|
|
* 05 CAS Carrier Auto Start
|
|
* 04 XC Transmit Continuously (ignored)
|
|
* 03..00 XBC[10..8] Transmit byte count bits 10..8
|
|
*
|
|
* 0000 0000
|
|
*/
|
|
val = 0x00;
|
|
if (info->params.flags & HDLC_FLAG_AUTO_DCD)
|
|
val |= BIT5;
|
|
write_reg(info, CHA + XBCH, val);
|
|
enable_auxclk(info);
|
|
if (info->params.loopback || info->testing_irq)
|
|
loopback_enable(info);
|
|
if (info->params.flags & HDLC_FLAG_AUTO_CTS)
|
|
{
|
|
irq_enable(info, CHB, IRQ_CTS);
|
|
/* PVR[3] 1=AUTO CTS active */
|
|
set_reg_bits(info, CHA + PVR, BIT3);
|
|
} else
|
|
clear_reg_bits(info, CHA + PVR, BIT3);
|
|
|
|
irq_enable(info, CHA,
|
|
IRQ_RXEOM | IRQ_RXFIFO | IRQ_ALLSENT |
|
|
IRQ_UNDERRUN | IRQ_TXFIFO);
|
|
issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
|
|
wait_command_complete(info, CHA);
|
|
read_reg16(info, CHA + ISR); /* clear pending IRQs */
|
|
|
|
/* Master clock mode enabled above to allow reset commands
|
|
* to complete even if no data clocks are present.
|
|
*
|
|
* Disable master clock mode for normal communications because
|
|
* V3.2 of the ESCC2 has a bug that prevents the transmit all sent
|
|
* IRQ when in master clock mode.
|
|
*
|
|
* Leave master clock mode enabled for IRQ test because the
|
|
* timer IRQ used by the test can only happen in master clock mode.
|
|
*/
|
|
if (!info->testing_irq)
|
|
clear_reg_bits(info, CHA + CCR0, BIT6);
|
|
|
|
tx_set_idle(info);
|
|
|
|
tx_stop(info);
|
|
rx_stop(info);
|
|
}
|
|
|
|
static void rx_stop(MGSLPC_INFO *info)
|
|
{
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):rx_stop(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
/* MODE:03 RAC Receiver Active, 0=inactive */
|
|
clear_reg_bits(info, CHA + MODE, BIT3);
|
|
|
|
info->rx_enabled = false;
|
|
info->rx_overflow = false;
|
|
}
|
|
|
|
static void rx_start(MGSLPC_INFO *info)
|
|
{
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):rx_start(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
rx_reset_buffers(info);
|
|
info->rx_enabled = false;
|
|
info->rx_overflow = false;
|
|
|
|
/* MODE:03 RAC Receiver Active, 1=active */
|
|
set_reg_bits(info, CHA + MODE, BIT3);
|
|
|
|
info->rx_enabled = true;
|
|
}
|
|
|
|
static void tx_start(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):tx_start(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
if (info->tx_count) {
|
|
/* If auto RTS enabled and RTS is inactive, then assert */
|
|
/* RTS and set a flag indicating that the driver should */
|
|
/* negate RTS when the transmission completes. */
|
|
info->drop_rts_on_tx_done = false;
|
|
|
|
if (info->params.flags & HDLC_FLAG_AUTO_RTS) {
|
|
get_signals(info);
|
|
if (!(info->serial_signals & SerialSignal_RTS)) {
|
|
info->serial_signals |= SerialSignal_RTS;
|
|
set_signals(info);
|
|
info->drop_rts_on_tx_done = true;
|
|
}
|
|
}
|
|
|
|
if (info->params.mode == MGSL_MODE_ASYNC) {
|
|
if (!info->tx_active) {
|
|
info->tx_active = true;
|
|
tx_ready(info, tty);
|
|
}
|
|
} else {
|
|
info->tx_active = true;
|
|
tx_ready(info, tty);
|
|
mod_timer(&info->tx_timer, jiffies +
|
|
msecs_to_jiffies(5000));
|
|
}
|
|
}
|
|
|
|
if (!info->tx_enabled)
|
|
info->tx_enabled = true;
|
|
}
|
|
|
|
static void tx_stop(MGSLPC_INFO *info)
|
|
{
|
|
if (debug_level >= DEBUG_LEVEL_ISR)
|
|
printk("%s(%d):tx_stop(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
|
|
del_timer(&info->tx_timer);
|
|
|
|
info->tx_enabled = false;
|
|
info->tx_active = false;
|
|
}
|
|
|
|
/* Reset the adapter to a known state and prepare it for further use.
|
|
*/
|
|
static void reset_device(MGSLPC_INFO *info)
|
|
{
|
|
/* power up both channels (set BIT7) */
|
|
write_reg(info, CHA + CCR0, 0x80);
|
|
write_reg(info, CHB + CCR0, 0x80);
|
|
write_reg(info, CHA + MODE, 0);
|
|
write_reg(info, CHB + MODE, 0);
|
|
|
|
/* disable all interrupts */
|
|
irq_disable(info, CHA, 0xffff);
|
|
irq_disable(info, CHB, 0xffff);
|
|
port_irq_disable(info, 0xff);
|
|
|
|
/* PCR Port Configuration Register
|
|
*
|
|
* 07..04 DEC[3..0] Serial I/F select outputs
|
|
* 03 output, 1=AUTO CTS control enabled
|
|
* 02 RI Ring Indicator input 0=active
|
|
* 01 DSR input 0=active
|
|
* 00 DTR output 0=active
|
|
*
|
|
* 0000 0110
|
|
*/
|
|
write_reg(info, PCR, 0x06);
|
|
|
|
/* PVR Port Value Register
|
|
*
|
|
* 07..04 DEC[3..0] Serial I/F select (0000=disabled)
|
|
* 03 AUTO CTS output 1=enabled
|
|
* 02 RI Ring Indicator input
|
|
* 01 DSR input
|
|
* 00 DTR output (1=inactive)
|
|
*
|
|
* 0000 0001
|
|
*/
|
|
// write_reg(info, PVR, PVR_DTR);
|
|
|
|
/* IPC Interrupt Port Configuration
|
|
*
|
|
* 07 VIS 1=Masked interrupts visible
|
|
* 06..05 Reserved, 0
|
|
* 04..03 SLA Slave address, 00 ignored
|
|
* 02 CASM Cascading Mode, 1=daisy chain
|
|
* 01..00 IC[1..0] Interrupt Config, 01=push-pull output, active low
|
|
*
|
|
* 0000 0101
|
|
*/
|
|
write_reg(info, IPC, 0x05);
|
|
}
|
|
|
|
static void async_mode(MGSLPC_INFO *info)
|
|
{
|
|
unsigned char val;
|
|
|
|
/* disable all interrupts */
|
|
irq_disable(info, CHA, 0xffff);
|
|
irq_disable(info, CHB, 0xffff);
|
|
port_irq_disable(info, 0xff);
|
|
|
|
/* MODE
|
|
*
|
|
* 07 Reserved, 0
|
|
* 06 FRTS RTS State, 0=active
|
|
* 05 FCTS Flow Control on CTS
|
|
* 04 FLON Flow Control Enable
|
|
* 03 RAC Receiver Active, 0 = inactive
|
|
* 02 RTS 0=Auto RTS, 1=manual RTS
|
|
* 01 TRS Timer Resolution, 1=512
|
|
* 00 TLP Test Loop, 0 = no loop
|
|
*
|
|
* 0000 0110
|
|
*/
|
|
val = 0x06;
|
|
if (info->params.loopback)
|
|
val |= BIT0;
|
|
|
|
/* preserve RTS state */
|
|
if (!(info->serial_signals & SerialSignal_RTS))
|
|
val |= BIT6;
|
|
write_reg(info, CHA + MODE, val);
|
|
|
|
/* CCR0
|
|
*
|
|
* 07 PU Power Up, 1=active, 0=power down
|
|
* 06 MCE Master Clock Enable, 1=enabled
|
|
* 05 Reserved, 0
|
|
* 04..02 SC[2..0] Encoding, 000=NRZ
|
|
* 01..00 SM[1..0] Serial Mode, 11=Async
|
|
*
|
|
* 1000 0011
|
|
*/
|
|
write_reg(info, CHA + CCR0, 0x83);
|
|
|
|
/* CCR1
|
|
*
|
|
* 07..05 Reserved, 0
|
|
* 04 ODS Output Driver Select, 1=TxD is push-pull output
|
|
* 03 BCR Bit Clock Rate, 1=16x
|
|
* 02..00 CM[2..0] Clock Mode, 111=BRG
|
|
*
|
|
* 0001 1111
|
|
*/
|
|
write_reg(info, CHA + CCR1, 0x1f);
|
|
|
|
/* CCR2 (channel A)
|
|
*
|
|
* 07..06 BGR[9..8] Baud rate bits 9..8
|
|
* 05 BDF Baud rate divisor factor, 0=1, 1=BGR value
|
|
* 04 SSEL Clock source select, 1=submode b
|
|
* 03 TOE 0=TxCLK is input, 0=TxCLK is input
|
|
* 02 RWX Read/Write Exchange 0=disabled
|
|
* 01 Reserved, 0
|
|
* 00 DIV, data inversion 0=disabled, 1=enabled
|
|
*
|
|
* 0001 0000
|
|
*/
|
|
write_reg(info, CHA + CCR2, 0x10);
|
|
|
|
/* CCR3
|
|
*
|
|
* 07..01 Reserved, 0
|
|
* 00 PSD DPLL Phase Shift Disable
|
|
*
|
|
* 0000 0000
|
|
*/
|
|
write_reg(info, CHA + CCR3, 0);
|
|
|
|
/* CCR4
|
|
*
|
|
* 07 MCK4 Master Clock Divide by 4, 1=enabled
|
|
* 06 EBRG Enhanced Baud Rate Generator Mode, 1=enabled
|
|
* 05 TST1 Test Pin, 0=normal operation
|
|
* 04 ICD Ivert Carrier Detect, 1=enabled (active low)
|
|
* 03..00 Reserved, must be 0
|
|
*
|
|
* 0101 0000
|
|
*/
|
|
write_reg(info, CHA + CCR4, 0x50);
|
|
mgslpc_set_rate(info, CHA, info->params.data_rate * 16);
|
|
|
|
/* DAFO Data Format
|
|
*
|
|
* 07 Reserved, 0
|
|
* 06 XBRK transmit break, 0=normal operation
|
|
* 05 Stop bits (0=1, 1=2)
|
|
* 04..03 PAR[1..0] Parity (01=odd, 10=even)
|
|
* 02 PAREN Parity Enable
|
|
* 01..00 CHL[1..0] Character Length (00=8, 01=7)
|
|
*
|
|
*/
|
|
val = 0x00;
|
|
if (info->params.data_bits != 8)
|
|
val |= BIT0; /* 7 bits */
|
|
if (info->params.stop_bits != 1)
|
|
val |= BIT5;
|
|
if (info->params.parity != ASYNC_PARITY_NONE)
|
|
{
|
|
val |= BIT2; /* Parity enable */
|
|
if (info->params.parity == ASYNC_PARITY_ODD)
|
|
val |= BIT3;
|
|
else
|
|
val |= BIT4;
|
|
}
|
|
write_reg(info, CHA + DAFO, val);
|
|
|
|
/* RFC Rx FIFO Control
|
|
*
|
|
* 07 Reserved, 0
|
|
* 06 DPS, 1=parity bit not stored in data byte
|
|
* 05 DXS, 0=all data stored in FIFO (including XON/XOFF)
|
|
* 04 RFDF Rx FIFO Data Format, 1=status byte stored in FIFO
|
|
* 03..02 RFTH[1..0], rx threshold, 11=16 status + 16 data byte
|
|
* 01 Reserved, 0
|
|
* 00 TCDE Terminate Char Detect Enable, 0=disabled
|
|
*
|
|
* 0101 1100
|
|
*/
|
|
write_reg(info, CHA + RFC, 0x5c);
|
|
|
|
/* RLCR Receive length check register
|
|
*
|
|
* Max frame length = (RL + 1) * 32
|
|
*/
|
|
write_reg(info, CHA + RLCR, 0);
|
|
|
|
/* XBCH Transmit Byte Count High
|
|
*
|
|
* 07 DMA mode, 0 = interrupt driven
|
|
* 06 NRM, 0=ABM (ignored)
|
|
* 05 CAS Carrier Auto Start
|
|
* 04 XC Transmit Continuously (ignored)
|
|
* 03..00 XBC[10..8] Transmit byte count bits 10..8
|
|
*
|
|
* 0000 0000
|
|
*/
|
|
val = 0x00;
|
|
if (info->params.flags & HDLC_FLAG_AUTO_DCD)
|
|
val |= BIT5;
|
|
write_reg(info, CHA + XBCH, val);
|
|
if (info->params.flags & HDLC_FLAG_AUTO_CTS)
|
|
irq_enable(info, CHA, IRQ_CTS);
|
|
|
|
/* MODE:03 RAC Receiver Active, 1=active */
|
|
set_reg_bits(info, CHA + MODE, BIT3);
|
|
enable_auxclk(info);
|
|
if (info->params.flags & HDLC_FLAG_AUTO_CTS) {
|
|
irq_enable(info, CHB, IRQ_CTS);
|
|
/* PVR[3] 1=AUTO CTS active */
|
|
set_reg_bits(info, CHA + PVR, BIT3);
|
|
} else
|
|
clear_reg_bits(info, CHA + PVR, BIT3);
|
|
irq_enable(info, CHA,
|
|
IRQ_RXEOM | IRQ_RXFIFO | IRQ_BREAK_ON | IRQ_RXTIME |
|
|
IRQ_ALLSENT | IRQ_TXFIFO);
|
|
issue_command(info, CHA, CMD_TXRESET + CMD_RXRESET);
|
|
wait_command_complete(info, CHA);
|
|
read_reg16(info, CHA + ISR); /* clear pending IRQs */
|
|
}
|
|
|
|
/* Set the HDLC idle mode for the transmitter.
|
|
*/
|
|
static void tx_set_idle(MGSLPC_INFO *info)
|
|
{
|
|
/* Note: ESCC2 only supports flags and one idle modes */
|
|
if (info->idle_mode == HDLC_TXIDLE_FLAGS)
|
|
set_reg_bits(info, CHA + CCR1, BIT3);
|
|
else
|
|
clear_reg_bits(info, CHA + CCR1, BIT3);
|
|
}
|
|
|
|
/* get state of the V24 status (input) signals.
|
|
*/
|
|
static void get_signals(MGSLPC_INFO *info)
|
|
{
|
|
unsigned char status = 0;
|
|
|
|
/* preserve RTS and DTR */
|
|
info->serial_signals &= SerialSignal_RTS | SerialSignal_DTR;
|
|
|
|
if (read_reg(info, CHB + VSTR) & BIT7)
|
|
info->serial_signals |= SerialSignal_DCD;
|
|
if (read_reg(info, CHB + STAR) & BIT1)
|
|
info->serial_signals |= SerialSignal_CTS;
|
|
|
|
status = read_reg(info, CHA + PVR);
|
|
if (!(status & PVR_RI))
|
|
info->serial_signals |= SerialSignal_RI;
|
|
if (!(status & PVR_DSR))
|
|
info->serial_signals |= SerialSignal_DSR;
|
|
}
|
|
|
|
/* Set the state of RTS and DTR based on contents of
|
|
* serial_signals member of device extension.
|
|
*/
|
|
static void set_signals(MGSLPC_INFO *info)
|
|
{
|
|
unsigned char val;
|
|
|
|
val = read_reg(info, CHA + MODE);
|
|
if (info->params.mode == MGSL_MODE_ASYNC) {
|
|
if (info->serial_signals & SerialSignal_RTS)
|
|
val &= ~BIT6;
|
|
else
|
|
val |= BIT6;
|
|
} else {
|
|
if (info->serial_signals & SerialSignal_RTS)
|
|
val |= BIT2;
|
|
else
|
|
val &= ~BIT2;
|
|
}
|
|
write_reg(info, CHA + MODE, val);
|
|
|
|
if (info->serial_signals & SerialSignal_DTR)
|
|
clear_reg_bits(info, CHA + PVR, PVR_DTR);
|
|
else
|
|
set_reg_bits(info, CHA + PVR, PVR_DTR);
|
|
}
|
|
|
|
static void rx_reset_buffers(MGSLPC_INFO *info)
|
|
{
|
|
RXBUF *buf;
|
|
int i;
|
|
|
|
info->rx_put = 0;
|
|
info->rx_get = 0;
|
|
info->rx_frame_count = 0;
|
|
for (i=0 ; i < info->rx_buf_count ; i++) {
|
|
buf = (RXBUF*)(info->rx_buf + (i * info->rx_buf_size));
|
|
buf->status = buf->count = 0;
|
|
}
|
|
}
|
|
|
|
/* Attempt to return a received HDLC frame
|
|
* Only frames received without errors are returned.
|
|
*
|
|
* Returns true if frame returned, otherwise false
|
|
*/
|
|
static bool rx_get_frame(MGSLPC_INFO *info, struct tty_struct *tty)
|
|
{
|
|
unsigned short status;
|
|
RXBUF *buf;
|
|
unsigned int framesize = 0;
|
|
unsigned long flags;
|
|
bool return_frame = false;
|
|
|
|
if (info->rx_frame_count == 0)
|
|
return false;
|
|
|
|
buf = (RXBUF*)(info->rx_buf + (info->rx_get * info->rx_buf_size));
|
|
|
|
status = buf->status;
|
|
|
|
/* 07 VFR 1=valid frame
|
|
* 06 RDO 1=data overrun
|
|
* 05 CRC 1=OK, 0=error
|
|
* 04 RAB 1=frame aborted
|
|
*/
|
|
if ((status & 0xf0) != 0xA0) {
|
|
if (!(status & BIT7) || (status & BIT4))
|
|
info->icount.rxabort++;
|
|
else if (status & BIT6)
|
|
info->icount.rxover++;
|
|
else if (!(status & BIT5)) {
|
|
info->icount.rxcrc++;
|
|
if (info->params.crc_type & HDLC_CRC_RETURN_EX)
|
|
return_frame = true;
|
|
}
|
|
framesize = 0;
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
{
|
|
info->netdev->stats.rx_errors++;
|
|
info->netdev->stats.rx_frame_errors++;
|
|
}
|
|
#endif
|
|
} else
|
|
return_frame = true;
|
|
|
|
if (return_frame)
|
|
framesize = buf->count;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_BH)
|
|
printk("%s(%d):rx_get_frame(%s) status=%04X size=%d\n",
|
|
__FILE__, __LINE__, info->device_name, status, framesize);
|
|
|
|
if (debug_level >= DEBUG_LEVEL_DATA)
|
|
trace_block(info, buf->data, framesize, 0);
|
|
|
|
if (framesize) {
|
|
if ((info->params.crc_type & HDLC_CRC_RETURN_EX &&
|
|
framesize+1 > info->max_frame_size) ||
|
|
framesize > info->max_frame_size)
|
|
info->icount.rxlong++;
|
|
else {
|
|
if (status & BIT5)
|
|
info->icount.rxok++;
|
|
|
|
if (info->params.crc_type & HDLC_CRC_RETURN_EX) {
|
|
*(buf->data + framesize) = status & BIT5 ? RX_OK:RX_CRC_ERROR;
|
|
++framesize;
|
|
}
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount)
|
|
hdlcdev_rx(info, buf->data, framesize);
|
|
else
|
|
#endif
|
|
ldisc_receive_buf(tty, buf->data, info->flag_buf, framesize);
|
|
}
|
|
}
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
buf->status = buf->count = 0;
|
|
info->rx_frame_count--;
|
|
info->rx_get++;
|
|
if (info->rx_get >= info->rx_buf_count)
|
|
info->rx_get = 0;
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
return true;
|
|
}
|
|
|
|
static bool register_test(MGSLPC_INFO *info)
|
|
{
|
|
static unsigned char patterns[] =
|
|
{ 0x00, 0xff, 0xaa, 0x55, 0x69, 0x96, 0x0f };
|
|
static unsigned int count = ARRAY_SIZE(patterns);
|
|
unsigned int i;
|
|
bool rc = true;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
reset_device(info);
|
|
|
|
for (i = 0; i < count; i++) {
|
|
write_reg(info, XAD1, patterns[i]);
|
|
write_reg(info, XAD2, patterns[(i + 1) % count]);
|
|
if ((read_reg(info, XAD1) != patterns[i]) ||
|
|
(read_reg(info, XAD2) != patterns[(i + 1) % count])) {
|
|
rc = false;
|
|
break;
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
static bool irq_test(MGSLPC_INFO *info)
|
|
{
|
|
unsigned long end_time;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
reset_device(info);
|
|
|
|
info->testing_irq = true;
|
|
hdlc_mode(info);
|
|
|
|
info->irq_occurred = false;
|
|
|
|
/* init hdlc mode */
|
|
|
|
irq_enable(info, CHA, IRQ_TIMER);
|
|
write_reg(info, CHA + TIMR, 0); /* 512 cycles */
|
|
issue_command(info, CHA, CMD_START_TIMER);
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
end_time=100;
|
|
while(end_time-- && !info->irq_occurred) {
|
|
msleep_interruptible(10);
|
|
}
|
|
|
|
info->testing_irq = false;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
reset_device(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
return info->irq_occurred;
|
|
}
|
|
|
|
static int adapter_test(MGSLPC_INFO *info)
|
|
{
|
|
if (!register_test(info)) {
|
|
info->init_error = DiagStatus_AddressFailure;
|
|
printk("%s(%d):Register test failure for device %s Addr=%04X\n",
|
|
__FILE__, __LINE__, info->device_name, (unsigned short)(info->io_base));
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!irq_test(info)) {
|
|
info->init_error = DiagStatus_IrqFailure;
|
|
printk("%s(%d):Interrupt test failure for device %s IRQ=%d\n",
|
|
__FILE__, __LINE__, info->device_name, (unsigned short)(info->irq_level));
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):device %s passed diagnostics\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
return 0;
|
|
}
|
|
|
|
static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
|
|
{
|
|
int i;
|
|
int linecount;
|
|
if (xmit)
|
|
printk("%s tx data:\n", info->device_name);
|
|
else
|
|
printk("%s rx data:\n", info->device_name);
|
|
|
|
while(count) {
|
|
if (count > 16)
|
|
linecount = 16;
|
|
else
|
|
linecount = count;
|
|
|
|
for(i=0;i<linecount;i++)
|
|
printk("%02X ", (unsigned char)data[i]);
|
|
for(;i<17;i++)
|
|
printk(" ");
|
|
for(i=0;i<linecount;i++) {
|
|
if (data[i]>=040 && data[i]<=0176)
|
|
printk("%c", data[i]);
|
|
else
|
|
printk(".");
|
|
}
|
|
printk("\n");
|
|
|
|
data += linecount;
|
|
count -= linecount;
|
|
}
|
|
}
|
|
|
|
/* HDLC frame time out
|
|
* update stats and do tx completion processing
|
|
*/
|
|
static void tx_timeout(unsigned long context)
|
|
{
|
|
MGSLPC_INFO *info = (MGSLPC_INFO*)context;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s(%d):tx_timeout(%s)\n",
|
|
__FILE__, __LINE__, info->device_name);
|
|
if (info->tx_active &&
|
|
info->params.mode == MGSL_MODE_HDLC) {
|
|
info->icount.txtimeout++;
|
|
}
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
info->tx_active = false;
|
|
info->tx_count = info->tx_put = info->tx_get = 0;
|
|
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
if (info->netcount)
|
|
hdlcdev_tx_done(info);
|
|
else
|
|
#endif
|
|
{
|
|
struct tty_struct *tty = tty_port_tty_get(&info->port);
|
|
bh_transmit(info, tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
}
|
|
|
|
#if SYNCLINK_GENERIC_HDLC
|
|
|
|
/**
|
|
* called by generic HDLC layer when protocol selected (PPP, frame relay, etc.)
|
|
* set encoding and frame check sequence (FCS) options
|
|
*
|
|
* dev pointer to network device structure
|
|
* encoding serial encoding setting
|
|
* parity FCS setting
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_attach(struct net_device *dev, unsigned short encoding,
|
|
unsigned short parity)
|
|
{
|
|
MGSLPC_INFO *info = dev_to_port(dev);
|
|
struct tty_struct *tty;
|
|
unsigned char new_encoding;
|
|
unsigned short new_crctype;
|
|
|
|
/* return error if TTY interface open */
|
|
if (info->port.count)
|
|
return -EBUSY;
|
|
|
|
switch (encoding)
|
|
{
|
|
case ENCODING_NRZ: new_encoding = HDLC_ENCODING_NRZ; break;
|
|
case ENCODING_NRZI: new_encoding = HDLC_ENCODING_NRZI_SPACE; break;
|
|
case ENCODING_FM_MARK: new_encoding = HDLC_ENCODING_BIPHASE_MARK; break;
|
|
case ENCODING_FM_SPACE: new_encoding = HDLC_ENCODING_BIPHASE_SPACE; break;
|
|
case ENCODING_MANCHESTER: new_encoding = HDLC_ENCODING_BIPHASE_LEVEL; break;
|
|
default: return -EINVAL;
|
|
}
|
|
|
|
switch (parity)
|
|
{
|
|
case PARITY_NONE: new_crctype = HDLC_CRC_NONE; break;
|
|
case PARITY_CRC16_PR1_CCITT: new_crctype = HDLC_CRC_16_CCITT; break;
|
|
case PARITY_CRC32_PR1_CCITT: new_crctype = HDLC_CRC_32_CCITT; break;
|
|
default: return -EINVAL;
|
|
}
|
|
|
|
info->params.encoding = new_encoding;
|
|
info->params.crc_type = new_crctype;
|
|
|
|
/* if network interface up, reprogram hardware */
|
|
if (info->netcount) {
|
|
tty = tty_port_tty_get(&info->port);
|
|
mgslpc_program_hw(info, tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by generic HDLC layer to send frame
|
|
*
|
|
* skb socket buffer containing HDLC frame
|
|
* dev pointer to network device structure
|
|
*/
|
|
static netdev_tx_t hdlcdev_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
MGSLPC_INFO *info = dev_to_port(dev);
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk(KERN_INFO "%s:hdlc_xmit(%s)\n", __FILE__, dev->name);
|
|
|
|
/* stop sending until this frame completes */
|
|
netif_stop_queue(dev);
|
|
|
|
/* copy data to device buffers */
|
|
skb_copy_from_linear_data(skb, info->tx_buf, skb->len);
|
|
info->tx_get = 0;
|
|
info->tx_put = info->tx_count = skb->len;
|
|
|
|
/* update network statistics */
|
|
dev->stats.tx_packets++;
|
|
dev->stats.tx_bytes += skb->len;
|
|
|
|
/* done with socket buffer, so free it */
|
|
dev_kfree_skb(skb);
|
|
|
|
/* save start time for transmit timeout detection */
|
|
dev->trans_start = jiffies;
|
|
|
|
/* start hardware transmitter if necessary */
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
if (!info->tx_active) {
|
|
struct tty_struct *tty = tty_port_tty_get(&info->port);
|
|
tx_start(info, tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
return NETDEV_TX_OK;
|
|
}
|
|
|
|
/**
|
|
* called by network layer when interface enabled
|
|
* claim resources and initialize hardware
|
|
*
|
|
* dev pointer to network device structure
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_open(struct net_device *dev)
|
|
{
|
|
MGSLPC_INFO *info = dev_to_port(dev);
|
|
struct tty_struct *tty;
|
|
int rc;
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s:hdlcdev_open(%s)\n", __FILE__, dev->name);
|
|
|
|
/* generic HDLC layer open processing */
|
|
rc = hdlc_open(dev);
|
|
if (rc != 0)
|
|
return rc;
|
|
|
|
/* arbitrate between network and tty opens */
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
if (info->port.count != 0 || info->netcount != 0) {
|
|
printk(KERN_WARNING "%s: hdlc_open returning busy\n", dev->name);
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
return -EBUSY;
|
|
}
|
|
info->netcount=1;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
|
|
tty = tty_port_tty_get(&info->port);
|
|
/* claim resources and init adapter */
|
|
rc = startup(info, tty);
|
|
if (rc != 0) {
|
|
tty_kref_put(tty);
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
info->netcount=0;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
return rc;
|
|
}
|
|
/* assert RTS and DTR, apply hardware settings */
|
|
info->serial_signals |= SerialSignal_RTS | SerialSignal_DTR;
|
|
mgslpc_program_hw(info, tty);
|
|
tty_kref_put(tty);
|
|
|
|
/* enable network layer transmit */
|
|
dev->trans_start = jiffies;
|
|
netif_start_queue(dev);
|
|
|
|
/* inform generic HDLC layer of current DCD status */
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
get_signals(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
if (info->serial_signals & SerialSignal_DCD)
|
|
netif_carrier_on(dev);
|
|
else
|
|
netif_carrier_off(dev);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by network layer when interface is disabled
|
|
* shutdown hardware and release resources
|
|
*
|
|
* dev pointer to network device structure
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_close(struct net_device *dev)
|
|
{
|
|
MGSLPC_INFO *info = dev_to_port(dev);
|
|
struct tty_struct *tty = tty_port_tty_get(&info->port);
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s:hdlcdev_close(%s)\n", __FILE__, dev->name);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* shutdown adapter and release resources */
|
|
shutdown(info, tty);
|
|
tty_kref_put(tty);
|
|
hdlc_close(dev);
|
|
|
|
spin_lock_irqsave(&info->netlock, flags);
|
|
info->netcount=0;
|
|
spin_unlock_irqrestore(&info->netlock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by network layer to process IOCTL call to network device
|
|
*
|
|
* dev pointer to network device structure
|
|
* ifr pointer to network interface request structure
|
|
* cmd IOCTL command code
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
|
|
{
|
|
const size_t size = sizeof(sync_serial_settings);
|
|
sync_serial_settings new_line;
|
|
sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
|
|
MGSLPC_INFO *info = dev_to_port(dev);
|
|
unsigned int flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("%s:hdlcdev_ioctl(%s)\n", __FILE__, dev->name);
|
|
|
|
/* return error if TTY interface open */
|
|
if (info->port.count)
|
|
return -EBUSY;
|
|
|
|
if (cmd != SIOCWANDEV)
|
|
return hdlc_ioctl(dev, ifr, cmd);
|
|
|
|
memset(&new_line, 0, size);
|
|
|
|
switch(ifr->ifr_settings.type) {
|
|
case IF_GET_IFACE: /* return current sync_serial_settings */
|
|
|
|
ifr->ifr_settings.type = IF_IFACE_SYNC_SERIAL;
|
|
if (ifr->ifr_settings.size < size) {
|
|
ifr->ifr_settings.size = size; /* data size wanted */
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
flags = info->params.flags & (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
|
|
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
|
|
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
|
|
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
|
|
|
|
switch (flags){
|
|
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN): new_line.clock_type = CLOCK_EXT; break;
|
|
case (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_INT; break;
|
|
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG): new_line.clock_type = CLOCK_TXINT; break;
|
|
case (HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN): new_line.clock_type = CLOCK_TXFROMRX; break;
|
|
default: new_line.clock_type = CLOCK_DEFAULT;
|
|
}
|
|
|
|
new_line.clock_rate = info->params.clock_speed;
|
|
new_line.loopback = info->params.loopback ? 1:0;
|
|
|
|
if (copy_to_user(line, &new_line, size))
|
|
return -EFAULT;
|
|
return 0;
|
|
|
|
case IF_IFACE_SYNC_SERIAL: /* set sync_serial_settings */
|
|
|
|
if(!capable(CAP_NET_ADMIN))
|
|
return -EPERM;
|
|
if (copy_from_user(&new_line, line, size))
|
|
return -EFAULT;
|
|
|
|
switch (new_line.clock_type)
|
|
{
|
|
case CLOCK_EXT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_TXCPIN; break;
|
|
case CLOCK_TXFROMRX: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_RXCPIN; break;
|
|
case CLOCK_INT: flags = HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG; break;
|
|
case CLOCK_TXINT: flags = HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_TXC_BRG; break;
|
|
case CLOCK_DEFAULT: flags = info->params.flags &
|
|
(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
|
|
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
|
|
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
|
|
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN); break;
|
|
default: return -EINVAL;
|
|
}
|
|
|
|
if (new_line.loopback != 0 && new_line.loopback != 1)
|
|
return -EINVAL;
|
|
|
|
info->params.flags &= ~(HDLC_FLAG_RXC_RXCPIN | HDLC_FLAG_RXC_DPLL |
|
|
HDLC_FLAG_RXC_BRG | HDLC_FLAG_RXC_TXCPIN |
|
|
HDLC_FLAG_TXC_TXCPIN | HDLC_FLAG_TXC_DPLL |
|
|
HDLC_FLAG_TXC_BRG | HDLC_FLAG_TXC_RXCPIN);
|
|
info->params.flags |= flags;
|
|
|
|
info->params.loopback = new_line.loopback;
|
|
|
|
if (flags & (HDLC_FLAG_RXC_BRG | HDLC_FLAG_TXC_BRG))
|
|
info->params.clock_speed = new_line.clock_rate;
|
|
else
|
|
info->params.clock_speed = 0;
|
|
|
|
/* if network interface up, reprogram hardware */
|
|
if (info->netcount) {
|
|
struct tty_struct *tty = tty_port_tty_get(&info->port);
|
|
mgslpc_program_hw(info, tty);
|
|
tty_kref_put(tty);
|
|
}
|
|
return 0;
|
|
|
|
default:
|
|
return hdlc_ioctl(dev, ifr, cmd);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* called by network layer when transmit timeout is detected
|
|
*
|
|
* dev pointer to network device structure
|
|
*/
|
|
static void hdlcdev_tx_timeout(struct net_device *dev)
|
|
{
|
|
MGSLPC_INFO *info = dev_to_port(dev);
|
|
unsigned long flags;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("hdlcdev_tx_timeout(%s)\n", dev->name);
|
|
|
|
dev->stats.tx_errors++;
|
|
dev->stats.tx_aborted_errors++;
|
|
|
|
spin_lock_irqsave(&info->lock, flags);
|
|
tx_stop(info);
|
|
spin_unlock_irqrestore(&info->lock, flags);
|
|
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/**
|
|
* called by device driver when transmit completes
|
|
* reenable network layer transmit if stopped
|
|
*
|
|
* info pointer to device instance information
|
|
*/
|
|
static void hdlcdev_tx_done(MGSLPC_INFO *info)
|
|
{
|
|
if (netif_queue_stopped(info->netdev))
|
|
netif_wake_queue(info->netdev);
|
|
}
|
|
|
|
/**
|
|
* called by device driver when frame received
|
|
* pass frame to network layer
|
|
*
|
|
* info pointer to device instance information
|
|
* buf pointer to buffer contianing frame data
|
|
* size count of data bytes in buf
|
|
*/
|
|
static void hdlcdev_rx(MGSLPC_INFO *info, char *buf, int size)
|
|
{
|
|
struct sk_buff *skb = dev_alloc_skb(size);
|
|
struct net_device *dev = info->netdev;
|
|
|
|
if (debug_level >= DEBUG_LEVEL_INFO)
|
|
printk("hdlcdev_rx(%s)\n", dev->name);
|
|
|
|
if (skb == NULL) {
|
|
printk(KERN_NOTICE "%s: can't alloc skb, dropping packet\n", dev->name);
|
|
dev->stats.rx_dropped++;
|
|
return;
|
|
}
|
|
|
|
memcpy(skb_put(skb, size), buf, size);
|
|
|
|
skb->protocol = hdlc_type_trans(skb, dev);
|
|
|
|
dev->stats.rx_packets++;
|
|
dev->stats.rx_bytes += size;
|
|
|
|
netif_rx(skb);
|
|
}
|
|
|
|
static const struct net_device_ops hdlcdev_ops = {
|
|
.ndo_open = hdlcdev_open,
|
|
.ndo_stop = hdlcdev_close,
|
|
.ndo_change_mtu = hdlc_change_mtu,
|
|
.ndo_start_xmit = hdlc_start_xmit,
|
|
.ndo_do_ioctl = hdlcdev_ioctl,
|
|
.ndo_tx_timeout = hdlcdev_tx_timeout,
|
|
};
|
|
|
|
/**
|
|
* called by device driver when adding device instance
|
|
* do generic HDLC initialization
|
|
*
|
|
* info pointer to device instance information
|
|
*
|
|
* returns 0 if success, otherwise error code
|
|
*/
|
|
static int hdlcdev_init(MGSLPC_INFO *info)
|
|
{
|
|
int rc;
|
|
struct net_device *dev;
|
|
hdlc_device *hdlc;
|
|
|
|
/* allocate and initialize network and HDLC layer objects */
|
|
|
|
dev = alloc_hdlcdev(info);
|
|
if (dev == NULL) {
|
|
printk(KERN_ERR "%s:hdlc device allocation failure\n", __FILE__);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* for network layer reporting purposes only */
|
|
dev->base_addr = info->io_base;
|
|
dev->irq = info->irq_level;
|
|
|
|
/* network layer callbacks and settings */
|
|
dev->netdev_ops = &hdlcdev_ops;
|
|
dev->watchdog_timeo = 10 * HZ;
|
|
dev->tx_queue_len = 50;
|
|
|
|
/* generic HDLC layer callbacks and settings */
|
|
hdlc = dev_to_hdlc(dev);
|
|
hdlc->attach = hdlcdev_attach;
|
|
hdlc->xmit = hdlcdev_xmit;
|
|
|
|
/* register objects with HDLC layer */
|
|
rc = register_hdlc_device(dev);
|
|
if (rc) {
|
|
printk(KERN_WARNING "%s:unable to register hdlc device\n", __FILE__);
|
|
free_netdev(dev);
|
|
return rc;
|
|
}
|
|
|
|
info->netdev = dev;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* called by device driver when removing device instance
|
|
* do generic HDLC cleanup
|
|
*
|
|
* info pointer to device instance information
|
|
*/
|
|
static void hdlcdev_exit(MGSLPC_INFO *info)
|
|
{
|
|
unregister_hdlc_device(info->netdev);
|
|
free_netdev(info->netdev);
|
|
info->netdev = NULL;
|
|
}
|
|
|
|
#endif /* CONFIG_HDLC */
|
|
|