linux-stable/drivers/net/wireless/wl12xx/wl1251_event.h
Kalle Valo 80301cdcfe wl1251: use wl1251 prefix everywhere
Last we can change all code prefixes from wl12xx/WL12XX to
wl1251/WL1251.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com>
Reviewed-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-10 14:57:50 -04:00

121 lines
3.9 KiB
C

/*
* This file is part of wl1251
*
* Copyright (c) 1998-2007 Texas Instruments Incorporated
* Copyright (C) 2008 Nokia Corporation
*
* Contact: Kalle Valo <kalle.valo@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __WL1251_EVENT_H__
#define __WL1251_EVENT_H__
/*
* Mbox events
*
* The event mechanism is based on a pair of event buffers (buffers A and
* B) at fixed locations in the target's memory. The host processes one
* buffer while the other buffer continues to collect events. If the host
* is not processing events, an interrupt is issued to signal that a buffer
* is ready. Once the host is done with processing events from one buffer,
* it signals the target (with an ACK interrupt) that the event buffer is
* free.
*/
enum {
RESERVED1_EVENT_ID = BIT(0),
RESERVED2_EVENT_ID = BIT(1),
MEASUREMENT_START_EVENT_ID = BIT(2),
SCAN_COMPLETE_EVENT_ID = BIT(3),
CALIBRATION_COMPLETE_EVENT_ID = BIT(4),
ROAMING_TRIGGER_LOW_RSSI_EVENT_ID = BIT(5),
PS_REPORT_EVENT_ID = BIT(6),
SYNCHRONIZATION_TIMEOUT_EVENT_ID = BIT(7),
HEALTH_REPORT_EVENT_ID = BIT(8),
ACI_DETECTION_EVENT_ID = BIT(9),
DEBUG_REPORT_EVENT_ID = BIT(10),
MAC_STATUS_EVENT_ID = BIT(11),
DISCONNECT_EVENT_COMPLETE_ID = BIT(12),
JOIN_EVENT_COMPLETE_ID = BIT(13),
CHANNEL_SWITCH_COMPLETE_EVENT_ID = BIT(14),
BSS_LOSE_EVENT_ID = BIT(15),
ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID = BIT(16),
MEASUREMENT_COMPLETE_EVENT_ID = BIT(17),
AP_DISCOVERY_COMPLETE_EVENT_ID = BIT(18),
SCHEDULED_SCAN_COMPLETE_EVENT_ID = BIT(19),
PSPOLL_DELIVERY_FAILURE_EVENT_ID = BIT(20),
RESET_BSS_EVENT_ID = BIT(21),
REGAINED_BSS_EVENT_ID = BIT(22),
ROAMING_TRIGGER_REGAINED_RSSI_EVENT_ID = BIT(23),
ROAMING_TRIGGER_LOW_SNR_EVENT_ID = BIT(24),
ROAMING_TRIGGER_REGAINED_SNR_EVENT_ID = BIT(25),
DBG_EVENT_ID = BIT(26),
BT_PTA_SENSE_EVENT_ID = BIT(27),
BT_PTA_PREDICTION_EVENT_ID = BIT(28),
BT_PTA_AVALANCHE_EVENT_ID = BIT(29),
PLT_RX_CALIBRATION_COMPLETE_EVENT_ID = BIT(30),
EVENT_MBOX_ALL_EVENT_ID = 0x7fffffff,
};
struct event_debug_report {
u8 debug_event_id;
u8 num_params;
u16 pad;
u32 report_1;
u32 report_2;
u32 report_3;
} __attribute__ ((packed));
struct event_mailbox {
u32 events_vector;
u32 events_mask;
u32 reserved_1;
u32 reserved_2;
char average_rssi_level;
u8 ps_status;
u8 channel_switch_status;
u8 scheduled_scan_status;
/* Channels scanned by the scheduled scan */
u16 scheduled_scan_channels;
/* If bit 0 is set -> target's fatal error */
u16 health_report;
u16 bad_fft_counter;
u8 bt_pta_sense_info;
u8 bt_pta_protective_info;
u32 reserved;
u32 debug_report[2];
/* Number of FCS errors since last event */
u32 fcs_err_counter;
struct event_debug_report report;
u8 average_snr_level;
u8 padding[19];
} __attribute__ ((packed));
int wl1251_event_unmask(struct wl1251 *wl);
void wl1251_event_mbox_config(struct wl1251 *wl);
int wl1251_event_handle(struct wl1251 *wl, u8 mbox);
#endif