mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Florian Fainelli](/assets/img/avatar_default.png)
RGMII interfaces come in 4 different flavors that the PHY library needs to care about: regular RGMII (no delays), RGMII with either RX or TX delay, and both. In order to avoid errors of checking only for one type of RGMII interface and miss the 3 others, introduce a convenience function which tests for all values. Suggested-by: David S. Miller <davem@davemloft.net> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
827 lines
26 KiB
C
827 lines
26 KiB
C
/*
|
|
* Framework and drivers for configuring and reading different PHYs
|
|
* Based on code in sungem_phy.c and gianfar_phy.c
|
|
*
|
|
* Author: Andy Fleming
|
|
*
|
|
* Copyright (c) 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
*/
|
|
|
|
#ifndef __PHY_H
|
|
#define __PHY_H
|
|
|
|
#include <linux/spinlock.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/mod_devicetable.h>
|
|
|
|
#include <linux/atomic.h>
|
|
|
|
#define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \
|
|
SUPPORTED_TP | \
|
|
SUPPORTED_MII)
|
|
|
|
#define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \
|
|
SUPPORTED_10baseT_Full)
|
|
|
|
#define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \
|
|
SUPPORTED_100baseT_Full)
|
|
|
|
#define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
|
|
SUPPORTED_1000baseT_Full)
|
|
|
|
#define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
|
|
PHY_100BT_FEATURES | \
|
|
PHY_DEFAULT_FEATURES)
|
|
|
|
#define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
|
|
PHY_1000BT_FEATURES)
|
|
|
|
|
|
/*
|
|
* Set phydev->irq to PHY_POLL if interrupts are not supported,
|
|
* or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
|
|
* the attached driver handles the interrupt
|
|
*/
|
|
#define PHY_POLL -1
|
|
#define PHY_IGNORE_INTERRUPT -2
|
|
|
|
#define PHY_HAS_INTERRUPT 0x00000001
|
|
#define PHY_HAS_MAGICANEG 0x00000002
|
|
#define PHY_IS_INTERNAL 0x00000004
|
|
|
|
/* Interface Mode definitions */
|
|
typedef enum {
|
|
PHY_INTERFACE_MODE_NA,
|
|
PHY_INTERFACE_MODE_MII,
|
|
PHY_INTERFACE_MODE_GMII,
|
|
PHY_INTERFACE_MODE_SGMII,
|
|
PHY_INTERFACE_MODE_TBI,
|
|
PHY_INTERFACE_MODE_REVMII,
|
|
PHY_INTERFACE_MODE_RMII,
|
|
PHY_INTERFACE_MODE_RGMII,
|
|
PHY_INTERFACE_MODE_RGMII_ID,
|
|
PHY_INTERFACE_MODE_RGMII_RXID,
|
|
PHY_INTERFACE_MODE_RGMII_TXID,
|
|
PHY_INTERFACE_MODE_RTBI,
|
|
PHY_INTERFACE_MODE_SMII,
|
|
PHY_INTERFACE_MODE_XGMII,
|
|
PHY_INTERFACE_MODE_MOCA,
|
|
PHY_INTERFACE_MODE_QSGMII,
|
|
PHY_INTERFACE_MODE_MAX,
|
|
} phy_interface_t;
|
|
|
|
/**
|
|
* It maps 'enum phy_interface_t' found in include/linux/phy.h
|
|
* into the device tree binding of 'phy-mode', so that Ethernet
|
|
* device driver can get phy interface from device tree.
|
|
*/
|
|
static inline const char *phy_modes(phy_interface_t interface)
|
|
{
|
|
switch (interface) {
|
|
case PHY_INTERFACE_MODE_NA:
|
|
return "";
|
|
case PHY_INTERFACE_MODE_MII:
|
|
return "mii";
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
return "gmii";
|
|
case PHY_INTERFACE_MODE_SGMII:
|
|
return "sgmii";
|
|
case PHY_INTERFACE_MODE_TBI:
|
|
return "tbi";
|
|
case PHY_INTERFACE_MODE_REVMII:
|
|
return "rev-mii";
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
return "rmii";
|
|
case PHY_INTERFACE_MODE_RGMII:
|
|
return "rgmii";
|
|
case PHY_INTERFACE_MODE_RGMII_ID:
|
|
return "rgmii-id";
|
|
case PHY_INTERFACE_MODE_RGMII_RXID:
|
|
return "rgmii-rxid";
|
|
case PHY_INTERFACE_MODE_RGMII_TXID:
|
|
return "rgmii-txid";
|
|
case PHY_INTERFACE_MODE_RTBI:
|
|
return "rtbi";
|
|
case PHY_INTERFACE_MODE_SMII:
|
|
return "smii";
|
|
case PHY_INTERFACE_MODE_XGMII:
|
|
return "xgmii";
|
|
case PHY_INTERFACE_MODE_MOCA:
|
|
return "moca";
|
|
case PHY_INTERFACE_MODE_QSGMII:
|
|
return "qsgmii";
|
|
default:
|
|
return "unknown";
|
|
}
|
|
}
|
|
|
|
|
|
#define PHY_INIT_TIMEOUT 100000
|
|
#define PHY_STATE_TIME 1
|
|
#define PHY_FORCE_TIMEOUT 10
|
|
#define PHY_AN_TIMEOUT 10
|
|
|
|
#define PHY_MAX_ADDR 32
|
|
|
|
/* Used when trying to connect to a specific phy (mii bus id:phy device id) */
|
|
#define PHY_ID_FMT "%s:%02x"
|
|
|
|
/*
|
|
* Need to be a little smaller than phydev->dev.bus_id to leave room
|
|
* for the ":%02x"
|
|
*/
|
|
#define MII_BUS_ID_SIZE (20 - 3)
|
|
|
|
/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
|
|
IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
|
|
#define MII_ADDR_C45 (1<<30)
|
|
|
|
struct device;
|
|
struct sk_buff;
|
|
|
|
/*
|
|
* The Bus class for PHYs. Devices which provide access to
|
|
* PHYs should register using this structure
|
|
*/
|
|
struct mii_bus {
|
|
const char *name;
|
|
char id[MII_BUS_ID_SIZE];
|
|
void *priv;
|
|
int (*read)(struct mii_bus *bus, int phy_id, int regnum);
|
|
int (*write)(struct mii_bus *bus, int phy_id, int regnum, u16 val);
|
|
int (*reset)(struct mii_bus *bus);
|
|
|
|
/*
|
|
* A lock to ensure that only one thing can read/write
|
|
* the MDIO bus at a time
|
|
*/
|
|
struct mutex mdio_lock;
|
|
|
|
struct device *parent;
|
|
enum {
|
|
MDIOBUS_ALLOCATED = 1,
|
|
MDIOBUS_REGISTERED,
|
|
MDIOBUS_UNREGISTERED,
|
|
MDIOBUS_RELEASED,
|
|
} state;
|
|
struct device dev;
|
|
|
|
/* list of all PHYs on bus */
|
|
struct phy_device *phy_map[PHY_MAX_ADDR];
|
|
|
|
/* PHY addresses to be ignored when probing */
|
|
u32 phy_mask;
|
|
|
|
/* PHY addresses to ignore the TA/read failure */
|
|
u32 phy_ignore_ta_mask;
|
|
|
|
/*
|
|
* Pointer to an array of interrupts, each PHY's
|
|
* interrupt at the index matching its address
|
|
*/
|
|
int *irq;
|
|
};
|
|
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
|
|
|
|
struct mii_bus *mdiobus_alloc_size(size_t);
|
|
static inline struct mii_bus *mdiobus_alloc(void)
|
|
{
|
|
return mdiobus_alloc_size(0);
|
|
}
|
|
|
|
int mdiobus_register(struct mii_bus *bus);
|
|
void mdiobus_unregister(struct mii_bus *bus);
|
|
void mdiobus_free(struct mii_bus *bus);
|
|
struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv);
|
|
static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev)
|
|
{
|
|
return devm_mdiobus_alloc_size(dev, 0);
|
|
}
|
|
|
|
void devm_mdiobus_free(struct device *dev, struct mii_bus *bus);
|
|
struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
|
|
int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
|
|
int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
|
|
|
|
|
|
#define PHY_INTERRUPT_DISABLED 0x0
|
|
#define PHY_INTERRUPT_ENABLED 0x80000000
|
|
|
|
/* PHY state machine states:
|
|
*
|
|
* DOWN: PHY device and driver are not ready for anything. probe
|
|
* should be called if and only if the PHY is in this state,
|
|
* given that the PHY device exists.
|
|
* - PHY driver probe function will, depending on the PHY, set
|
|
* the state to STARTING or READY
|
|
*
|
|
* STARTING: PHY device is coming up, and the ethernet driver is
|
|
* not ready. PHY drivers may set this in the probe function.
|
|
* If they do, they are responsible for making sure the state is
|
|
* eventually set to indicate whether the PHY is UP or READY,
|
|
* depending on the state when the PHY is done starting up.
|
|
* - PHY driver will set the state to READY
|
|
* - start will set the state to PENDING
|
|
*
|
|
* READY: PHY is ready to send and receive packets, but the
|
|
* controller is not. By default, PHYs which do not implement
|
|
* probe will be set to this state by phy_probe(). If the PHY
|
|
* driver knows the PHY is ready, and the PHY state is STARTING,
|
|
* then it sets this STATE.
|
|
* - start will set the state to UP
|
|
*
|
|
* PENDING: PHY device is coming up, but the ethernet driver is
|
|
* ready. phy_start will set this state if the PHY state is
|
|
* STARTING.
|
|
* - PHY driver will set the state to UP when the PHY is ready
|
|
*
|
|
* UP: The PHY and attached device are ready to do work.
|
|
* Interrupts should be started here.
|
|
* - timer moves to AN
|
|
*
|
|
* AN: The PHY is currently negotiating the link state. Link is
|
|
* therefore down for now. phy_timer will set this state when it
|
|
* detects the state is UP. config_aneg will set this state
|
|
* whenever called with phydev->autoneg set to AUTONEG_ENABLE.
|
|
* - If autonegotiation finishes, but there's no link, it sets
|
|
* the state to NOLINK.
|
|
* - If aneg finishes with link, it sets the state to RUNNING,
|
|
* and calls adjust_link
|
|
* - If autonegotiation did not finish after an arbitrary amount
|
|
* of time, autonegotiation should be tried again if the PHY
|
|
* supports "magic" autonegotiation (back to AN)
|
|
* - If it didn't finish, and no magic_aneg, move to FORCING.
|
|
*
|
|
* NOLINK: PHY is up, but not currently plugged in.
|
|
* - If the timer notes that the link comes back, we move to RUNNING
|
|
* - config_aneg moves to AN
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* FORCING: PHY is being configured with forced settings
|
|
* - if link is up, move to RUNNING
|
|
* - If link is down, we drop to the next highest setting, and
|
|
* retry (FORCING) after a timeout
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* RUNNING: PHY is currently up, running, and possibly sending
|
|
* and/or receiving packets
|
|
* - timer will set CHANGELINK if we're polling (this ensures the
|
|
* link state is polled every other cycle of this state machine,
|
|
* which makes it every other second)
|
|
* - irq will set CHANGELINK
|
|
* - config_aneg will set AN
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* CHANGELINK: PHY experienced a change in link state
|
|
* - timer moves to RUNNING if link
|
|
* - timer moves to NOLINK if the link is down
|
|
* - phy_stop moves to HALTED
|
|
*
|
|
* HALTED: PHY is up, but no polling or interrupts are done. Or
|
|
* PHY is in an error state.
|
|
*
|
|
* - phy_start moves to RESUMING
|
|
*
|
|
* RESUMING: PHY was halted, but now wants to run again.
|
|
* - If we are forcing, or aneg is done, timer moves to RUNNING
|
|
* - If aneg is not done, timer moves to AN
|
|
* - phy_stop moves to HALTED
|
|
*/
|
|
enum phy_state {
|
|
PHY_DOWN = 0,
|
|
PHY_STARTING,
|
|
PHY_READY,
|
|
PHY_PENDING,
|
|
PHY_UP,
|
|
PHY_AN,
|
|
PHY_RUNNING,
|
|
PHY_NOLINK,
|
|
PHY_FORCING,
|
|
PHY_CHANGELINK,
|
|
PHY_HALTED,
|
|
PHY_RESUMING
|
|
};
|
|
|
|
/**
|
|
* struct phy_c45_device_ids - 802.3-c45 Device Identifiers
|
|
* @devices_in_package: Bit vector of devices present.
|
|
* @device_ids: The device identifer for each present device.
|
|
*/
|
|
struct phy_c45_device_ids {
|
|
u32 devices_in_package;
|
|
u32 device_ids[8];
|
|
};
|
|
|
|
/* phy_device: An instance of a PHY
|
|
*
|
|
* drv: Pointer to the driver for this PHY instance
|
|
* bus: Pointer to the bus this PHY is on
|
|
* dev: driver model device structure for this PHY
|
|
* phy_id: UID for this device found during discovery
|
|
* c45_ids: 802.3-c45 Device Identifers if is_c45.
|
|
* is_c45: Set to true if this phy uses clause 45 addressing.
|
|
* is_internal: Set to true if this phy is internal to a MAC.
|
|
* has_fixups: Set to true if this phy has fixups/quirks.
|
|
* suspended: Set to true if this phy has been suspended successfully.
|
|
* state: state of the PHY for management purposes
|
|
* dev_flags: Device-specific flags used by the PHY driver.
|
|
* addr: Bus address of PHY
|
|
* link_timeout: The number of timer firings to wait before the
|
|
* giving up on the current attempt at acquiring a link
|
|
* irq: IRQ number of the PHY's interrupt (-1 if none)
|
|
* phy_timer: The timer for handling the state machine
|
|
* phy_queue: A work_queue for the interrupt
|
|
* attached_dev: The attached enet driver's device instance ptr
|
|
* adjust_link: Callback for the enet controller to respond to
|
|
* changes in the link state.
|
|
*
|
|
* speed, duplex, pause, supported, advertising, lp_advertising,
|
|
* and autoneg are used like in mii_if_info
|
|
*
|
|
* interrupts currently only supports enabled or disabled,
|
|
* but could be changed in the future to support enabling
|
|
* and disabling specific interrupts
|
|
*
|
|
* Contains some infrastructure for polling and interrupt
|
|
* handling, as well as handling shifts in PHY hardware state
|
|
*/
|
|
struct phy_device {
|
|
/* Information about the PHY type */
|
|
/* And management functions */
|
|
struct phy_driver *drv;
|
|
|
|
struct mii_bus *bus;
|
|
|
|
struct device dev;
|
|
|
|
u32 phy_id;
|
|
|
|
struct phy_c45_device_ids c45_ids;
|
|
bool is_c45;
|
|
bool is_internal;
|
|
bool has_fixups;
|
|
bool suspended;
|
|
|
|
enum phy_state state;
|
|
|
|
u32 dev_flags;
|
|
|
|
phy_interface_t interface;
|
|
|
|
/* Bus address of the PHY (0-31) */
|
|
int addr;
|
|
|
|
/*
|
|
* forced speed & duplex (no autoneg)
|
|
* partner speed & duplex & pause (autoneg)
|
|
*/
|
|
int speed;
|
|
int duplex;
|
|
int pause;
|
|
int asym_pause;
|
|
|
|
/* The most recently read link state */
|
|
int link;
|
|
|
|
/* Enabled Interrupts */
|
|
u32 interrupts;
|
|
|
|
/* Union of PHY and Attached devices' supported modes */
|
|
/* See mii.h for more info */
|
|
u32 supported;
|
|
u32 advertising;
|
|
u32 lp_advertising;
|
|
|
|
int autoneg;
|
|
|
|
int link_timeout;
|
|
|
|
/*
|
|
* Interrupt number for this PHY
|
|
* -1 means no interrupt
|
|
*/
|
|
int irq;
|
|
|
|
/* private data pointer */
|
|
/* For use by PHYs to maintain extra state */
|
|
void *priv;
|
|
|
|
/* Interrupt and Polling infrastructure */
|
|
struct work_struct phy_queue;
|
|
struct delayed_work state_queue;
|
|
atomic_t irq_disable;
|
|
|
|
struct mutex lock;
|
|
|
|
struct net_device *attached_dev;
|
|
|
|
void (*adjust_link)(struct net_device *dev);
|
|
};
|
|
#define to_phy_device(d) container_of(d, struct phy_device, dev)
|
|
|
|
/* struct phy_driver: Driver structure for a particular PHY type
|
|
*
|
|
* phy_id: The result of reading the UID registers of this PHY
|
|
* type, and ANDing them with the phy_id_mask. This driver
|
|
* only works for PHYs with IDs which match this field
|
|
* name: The friendly name of this PHY type
|
|
* phy_id_mask: Defines the important bits of the phy_id
|
|
* features: A list of features (speed, duplex, etc) supported
|
|
* by this PHY
|
|
* flags: A bitfield defining certain other features this PHY
|
|
* supports (like interrupts)
|
|
* driver_data: static driver data
|
|
*
|
|
* The drivers must implement config_aneg and read_status. All
|
|
* other functions are optional. Note that none of these
|
|
* functions should be called from interrupt time. The goal is
|
|
* for the bus read/write functions to be able to block when the
|
|
* bus transaction is happening, and be freed up by an interrupt
|
|
* (The MPC85xx has this ability, though it is not currently
|
|
* supported in the driver).
|
|
*/
|
|
struct phy_driver {
|
|
u32 phy_id;
|
|
char *name;
|
|
unsigned int phy_id_mask;
|
|
u32 features;
|
|
u32 flags;
|
|
const void *driver_data;
|
|
|
|
/*
|
|
* Called to issue a PHY software reset
|
|
*/
|
|
int (*soft_reset)(struct phy_device *phydev);
|
|
|
|
/*
|
|
* Called to initialize the PHY,
|
|
* including after a reset
|
|
*/
|
|
int (*config_init)(struct phy_device *phydev);
|
|
|
|
/*
|
|
* Called during discovery. Used to set
|
|
* up device-specific structures, if any
|
|
*/
|
|
int (*probe)(struct phy_device *phydev);
|
|
|
|
/* PHY Power Management */
|
|
int (*suspend)(struct phy_device *phydev);
|
|
int (*resume)(struct phy_device *phydev);
|
|
|
|
/*
|
|
* Configures the advertisement and resets
|
|
* autonegotiation if phydev->autoneg is on,
|
|
* forces the speed to the current settings in phydev
|
|
* if phydev->autoneg is off
|
|
*/
|
|
int (*config_aneg)(struct phy_device *phydev);
|
|
|
|
/* Determines the auto negotiation result */
|
|
int (*aneg_done)(struct phy_device *phydev);
|
|
|
|
/* Determines the negotiated speed and duplex */
|
|
int (*read_status)(struct phy_device *phydev);
|
|
|
|
/* Clears any pending interrupts */
|
|
int (*ack_interrupt)(struct phy_device *phydev);
|
|
|
|
/* Enables or disables interrupts */
|
|
int (*config_intr)(struct phy_device *phydev);
|
|
|
|
/*
|
|
* Checks if the PHY generated an interrupt.
|
|
* For multi-PHY devices with shared PHY interrupt pin
|
|
*/
|
|
int (*did_interrupt)(struct phy_device *phydev);
|
|
|
|
/* Clears up any memory if needed */
|
|
void (*remove)(struct phy_device *phydev);
|
|
|
|
/* Returns true if this is a suitable driver for the given
|
|
* phydev. If NULL, matching is based on phy_id and
|
|
* phy_id_mask.
|
|
*/
|
|
int (*match_phy_device)(struct phy_device *phydev);
|
|
|
|
/* Handles ethtool queries for hardware time stamping. */
|
|
int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti);
|
|
|
|
/* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
|
|
int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
|
|
|
|
/*
|
|
* Requests a Rx timestamp for 'skb'. If the skb is accepted,
|
|
* the phy driver promises to deliver it using netif_rx() as
|
|
* soon as a timestamp becomes available. One of the
|
|
* PTP_CLASS_ values is passed in 'type'. The function must
|
|
* return true if the skb is accepted for delivery.
|
|
*/
|
|
bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
|
|
|
|
/*
|
|
* Requests a Tx timestamp for 'skb'. The phy driver promises
|
|
* to deliver it using skb_complete_tx_timestamp() as soon as a
|
|
* timestamp becomes available. One of the PTP_CLASS_ values
|
|
* is passed in 'type'.
|
|
*/
|
|
void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
|
|
|
|
/* Some devices (e.g. qnap TS-119P II) require PHY register changes to
|
|
* enable Wake on LAN, so set_wol is provided to be called in the
|
|
* ethernet driver's set_wol function. */
|
|
int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
|
|
|
|
/* See set_wol, but for checking whether Wake on LAN is enabled. */
|
|
void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
|
|
|
|
/*
|
|
* Called to inform a PHY device driver when the core is about to
|
|
* change the link state. This callback is supposed to be used as
|
|
* fixup hook for drivers that need to take action when the link
|
|
* state changes. Drivers are by no means allowed to mess with the
|
|
* PHY device structure in their implementations.
|
|
*/
|
|
void (*link_change_notify)(struct phy_device *dev);
|
|
|
|
/* A function provided by a phy specific driver to override the
|
|
* the PHY driver framework support for reading a MMD register
|
|
* from the PHY. If not supported, return -1. This function is
|
|
* optional for PHY specific drivers, if not provided then the
|
|
* default MMD read function is used by the PHY framework.
|
|
*/
|
|
int (*read_mmd_indirect)(struct phy_device *dev, int ptrad,
|
|
int devnum, int regnum);
|
|
|
|
/* A function provided by a phy specific driver to override the
|
|
* the PHY driver framework support for writing a MMD register
|
|
* from the PHY. This function is optional for PHY specific drivers,
|
|
* if not provided then the default MMD read function is used by
|
|
* the PHY framework.
|
|
*/
|
|
void (*write_mmd_indirect)(struct phy_device *dev, int ptrad,
|
|
int devnum, int regnum, u32 val);
|
|
|
|
/* Get the size and type of the eeprom contained within a plug-in
|
|
* module */
|
|
int (*module_info)(struct phy_device *dev,
|
|
struct ethtool_modinfo *modinfo);
|
|
|
|
/* Get the eeprom information from the plug-in module */
|
|
int (*module_eeprom)(struct phy_device *dev,
|
|
struct ethtool_eeprom *ee, u8 *data);
|
|
|
|
struct device_driver driver;
|
|
};
|
|
#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
|
|
|
|
#define PHY_ANY_ID "MATCH ANY PHY"
|
|
#define PHY_ANY_UID 0xffffffff
|
|
|
|
/* A Structure for boards to register fixups with the PHY Lib */
|
|
struct phy_fixup {
|
|
struct list_head list;
|
|
char bus_id[20];
|
|
u32 phy_uid;
|
|
u32 phy_uid_mask;
|
|
int (*run)(struct phy_device *phydev);
|
|
};
|
|
|
|
/**
|
|
* phy_read_mmd - Convenience function for reading a register
|
|
* from an MMD on a given PHY.
|
|
* @phydev: The phy_device struct
|
|
* @devad: The MMD to read from
|
|
* @regnum: The register on the MMD to read
|
|
*
|
|
* Same rules as for phy_read();
|
|
*/
|
|
static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum)
|
|
{
|
|
if (!phydev->is_c45)
|
|
return -EOPNOTSUPP;
|
|
|
|
return mdiobus_read(phydev->bus, phydev->addr,
|
|
MII_ADDR_C45 | (devad << 16) | (regnum & 0xffff));
|
|
}
|
|
|
|
/**
|
|
* phy_read_mmd_indirect - reads data from the MMD registers
|
|
* @phydev: The PHY device bus
|
|
* @prtad: MMD Address
|
|
* @devad: MMD DEVAD
|
|
* @addr: PHY address on the MII bus
|
|
*
|
|
* Description: it reads data from the MMD registers (clause 22 to access to
|
|
* clause 45) of the specified phy address.
|
|
*/
|
|
int phy_read_mmd_indirect(struct phy_device *phydev, int prtad,
|
|
int devad, int addr);
|
|
|
|
/**
|
|
* phy_read - Convenience function for reading a given PHY register
|
|
* @phydev: the phy_device struct
|
|
* @regnum: register number to read
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*/
|
|
static inline int phy_read(struct phy_device *phydev, u32 regnum)
|
|
{
|
|
return mdiobus_read(phydev->bus, phydev->addr, regnum);
|
|
}
|
|
|
|
/**
|
|
* phy_write - Convenience function for writing a given PHY register
|
|
* @phydev: the phy_device struct
|
|
* @regnum: register number to write
|
|
* @val: value to write to @regnum
|
|
*
|
|
* NOTE: MUST NOT be called from interrupt context,
|
|
* because the bus read/write functions may wait for an interrupt
|
|
* to conclude the operation.
|
|
*/
|
|
static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
|
|
{
|
|
return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
|
|
}
|
|
|
|
/**
|
|
* phy_interrupt_is_valid - Convenience function for testing a given PHY irq
|
|
* @phydev: the phy_device struct
|
|
*
|
|
* NOTE: must be kept in sync with addition/removal of PHY_POLL and
|
|
* PHY_IGNORE_INTERRUPT
|
|
*/
|
|
static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
|
|
{
|
|
return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT;
|
|
}
|
|
|
|
/**
|
|
* phy_is_internal - Convenience function for testing if a PHY is internal
|
|
* @phydev: the phy_device struct
|
|
*/
|
|
static inline bool phy_is_internal(struct phy_device *phydev)
|
|
{
|
|
return phydev->is_internal;
|
|
}
|
|
|
|
/**
|
|
* phy_interface_is_rgmii - Convenience function for testing if a PHY interface
|
|
* is RGMII (all variants)
|
|
* @phydev: the phy_device struct
|
|
*/
|
|
static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
|
|
{
|
|
return phydev->interface >= PHY_INTERFACE_MODE_RGMII &&
|
|
phydev->interface <= PHY_INTERFACE_MODE_RGMII_TXID;
|
|
}
|
|
|
|
/**
|
|
* phy_write_mmd - Convenience function for writing a register
|
|
* on an MMD on a given PHY.
|
|
* @phydev: The phy_device struct
|
|
* @devad: The MMD to read from
|
|
* @regnum: The register on the MMD to read
|
|
* @val: value to write to @regnum
|
|
*
|
|
* Same rules as for phy_write();
|
|
*/
|
|
static inline int phy_write_mmd(struct phy_device *phydev, int devad,
|
|
u32 regnum, u16 val)
|
|
{
|
|
if (!phydev->is_c45)
|
|
return -EOPNOTSUPP;
|
|
|
|
regnum = MII_ADDR_C45 | ((devad & 0x1f) << 16) | (regnum & 0xffff);
|
|
|
|
return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
|
|
}
|
|
|
|
/**
|
|
* phy_write_mmd_indirect - writes data to the MMD registers
|
|
* @phydev: The PHY device
|
|
* @prtad: MMD Address
|
|
* @devad: MMD DEVAD
|
|
* @addr: PHY address on the MII bus
|
|
* @data: data to write in the MMD register
|
|
*
|
|
* Description: Write data from the MMD registers of the specified
|
|
* phy address.
|
|
*/
|
|
void phy_write_mmd_indirect(struct phy_device *phydev, int prtad,
|
|
int devad, int addr, u32 data);
|
|
|
|
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
|
|
bool is_c45,
|
|
struct phy_c45_device_ids *c45_ids);
|
|
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
|
|
int phy_device_register(struct phy_device *phy);
|
|
int phy_init_hw(struct phy_device *phydev);
|
|
int phy_suspend(struct phy_device *phydev);
|
|
int phy_resume(struct phy_device *phydev);
|
|
struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
|
|
phy_interface_t interface);
|
|
struct phy_device *phy_find_first(struct mii_bus *bus);
|
|
int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
|
|
u32 flags, phy_interface_t interface);
|
|
int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
|
|
void (*handler)(struct net_device *),
|
|
phy_interface_t interface);
|
|
struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
|
|
void (*handler)(struct net_device *),
|
|
phy_interface_t interface);
|
|
void phy_disconnect(struct phy_device *phydev);
|
|
void phy_detach(struct phy_device *phydev);
|
|
void phy_start(struct phy_device *phydev);
|
|
void phy_stop(struct phy_device *phydev);
|
|
int phy_start_aneg(struct phy_device *phydev);
|
|
|
|
int phy_stop_interrupts(struct phy_device *phydev);
|
|
|
|
static inline int phy_read_status(struct phy_device *phydev)
|
|
{
|
|
return phydev->drv->read_status(phydev);
|
|
}
|
|
|
|
int genphy_config_init(struct phy_device *phydev);
|
|
int genphy_setup_forced(struct phy_device *phydev);
|
|
int genphy_restart_aneg(struct phy_device *phydev);
|
|
int genphy_config_aneg(struct phy_device *phydev);
|
|
int genphy_aneg_done(struct phy_device *phydev);
|
|
int genphy_update_link(struct phy_device *phydev);
|
|
int genphy_read_status(struct phy_device *phydev);
|
|
int genphy_suspend(struct phy_device *phydev);
|
|
int genphy_resume(struct phy_device *phydev);
|
|
int genphy_soft_reset(struct phy_device *phydev);
|
|
void phy_driver_unregister(struct phy_driver *drv);
|
|
void phy_drivers_unregister(struct phy_driver *drv, int n);
|
|
int phy_driver_register(struct phy_driver *new_driver);
|
|
int phy_drivers_register(struct phy_driver *new_driver, int n);
|
|
void phy_state_machine(struct work_struct *work);
|
|
void phy_change(struct work_struct *work);
|
|
void phy_mac_interrupt(struct phy_device *phydev, int new_link);
|
|
void phy_start_machine(struct phy_device *phydev);
|
|
void phy_stop_machine(struct phy_device *phydev);
|
|
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
|
|
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
|
|
int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
|
|
int phy_start_interrupts(struct phy_device *phydev);
|
|
void phy_print_status(struct phy_device *phydev);
|
|
void phy_device_free(struct phy_device *phydev);
|
|
|
|
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
|
|
int (*run)(struct phy_device *));
|
|
int phy_register_fixup_for_id(const char *bus_id,
|
|
int (*run)(struct phy_device *));
|
|
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
|
|
int (*run)(struct phy_device *));
|
|
|
|
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
|
|
int phy_get_eee_err(struct phy_device *phydev);
|
|
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
|
|
int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
|
|
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
|
|
void phy_ethtool_get_wol(struct phy_device *phydev,
|
|
struct ethtool_wolinfo *wol);
|
|
|
|
int __init mdio_bus_init(void);
|
|
void mdio_bus_exit(void);
|
|
|
|
extern struct bus_type mdio_bus_type;
|
|
|
|
/**
|
|
* module_phy_driver() - Helper macro for registering PHY drivers
|
|
* @__phy_drivers: array of PHY drivers to register
|
|
*
|
|
* Helper macro for PHY drivers which do not do anything special in module
|
|
* init/exit. Each module may only use this macro once, and calling it
|
|
* replaces module_init() and module_exit().
|
|
*/
|
|
#define phy_module_driver(__phy_drivers, __count) \
|
|
static int __init phy_module_init(void) \
|
|
{ \
|
|
return phy_drivers_register(__phy_drivers, __count); \
|
|
} \
|
|
module_init(phy_module_init); \
|
|
static void __exit phy_module_exit(void) \
|
|
{ \
|
|
phy_drivers_unregister(__phy_drivers, __count); \
|
|
} \
|
|
module_exit(phy_module_exit)
|
|
|
|
#define module_phy_driver(__phy_drivers) \
|
|
phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers))
|
|
|
|
#endif /* __PHY_H */
|