mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 17:30:02 +00:00
![André Apitzsch](/assets/img/avatar_default.png)
Explicity specify array indices to fix mapping between
asahi_compass_chipset and ak_def_array.
While at it, remove unneeded AKXXXX.
Fixes: 4f9ea93afd
("iio: magnetometer: ak8975: Convert enum->pointer for data in the match tables")
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231001-ak_magnetometer-v1-1-09bf3b8798a3@apitzsch.eu
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
1104 lines
27 KiB
C
1104 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* A sensor driver for the magnetometer AK8975.
|
|
*
|
|
* Magnetic compass sensor driver for monitoring magnetic flux information.
|
|
*
|
|
* Copyright (c) 2010, NVIDIA Corporation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/pm_runtime.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
|
|
/*
|
|
* Register definitions, as well as various shifts and masks to get at the
|
|
* individual fields of the registers.
|
|
*/
|
|
#define AK8975_REG_WIA 0x00
|
|
#define AK8975_DEVICE_ID 0x48
|
|
|
|
#define AK8975_REG_INFO 0x01
|
|
|
|
#define AK8975_REG_ST1 0x02
|
|
#define AK8975_REG_ST1_DRDY_SHIFT 0
|
|
#define AK8975_REG_ST1_DRDY_MASK (1 << AK8975_REG_ST1_DRDY_SHIFT)
|
|
|
|
#define AK8975_REG_HXL 0x03
|
|
#define AK8975_REG_HXH 0x04
|
|
#define AK8975_REG_HYL 0x05
|
|
#define AK8975_REG_HYH 0x06
|
|
#define AK8975_REG_HZL 0x07
|
|
#define AK8975_REG_HZH 0x08
|
|
#define AK8975_REG_ST2 0x09
|
|
#define AK8975_REG_ST2_DERR_SHIFT 2
|
|
#define AK8975_REG_ST2_DERR_MASK (1 << AK8975_REG_ST2_DERR_SHIFT)
|
|
|
|
#define AK8975_REG_ST2_HOFL_SHIFT 3
|
|
#define AK8975_REG_ST2_HOFL_MASK (1 << AK8975_REG_ST2_HOFL_SHIFT)
|
|
|
|
#define AK8975_REG_CNTL 0x0A
|
|
#define AK8975_REG_CNTL_MODE_SHIFT 0
|
|
#define AK8975_REG_CNTL_MODE_MASK (0xF << AK8975_REG_CNTL_MODE_SHIFT)
|
|
#define AK8975_REG_CNTL_MODE_POWER_DOWN 0x00
|
|
#define AK8975_REG_CNTL_MODE_ONCE 0x01
|
|
#define AK8975_REG_CNTL_MODE_SELF_TEST 0x08
|
|
#define AK8975_REG_CNTL_MODE_FUSE_ROM 0x0F
|
|
|
|
#define AK8975_REG_RSVC 0x0B
|
|
#define AK8975_REG_ASTC 0x0C
|
|
#define AK8975_REG_TS1 0x0D
|
|
#define AK8975_REG_TS2 0x0E
|
|
#define AK8975_REG_I2CDIS 0x0F
|
|
#define AK8975_REG_ASAX 0x10
|
|
#define AK8975_REG_ASAY 0x11
|
|
#define AK8975_REG_ASAZ 0x12
|
|
|
|
#define AK8975_MAX_REGS AK8975_REG_ASAZ
|
|
|
|
/*
|
|
* AK09912 Register definitions
|
|
*/
|
|
#define AK09912_REG_WIA1 0x00
|
|
#define AK09912_REG_WIA2 0x01
|
|
#define AK09916_DEVICE_ID 0x09
|
|
#define AK09912_DEVICE_ID 0x04
|
|
#define AK09911_DEVICE_ID 0x05
|
|
|
|
#define AK09911_REG_INFO1 0x02
|
|
#define AK09911_REG_INFO2 0x03
|
|
|
|
#define AK09912_REG_ST1 0x10
|
|
|
|
#define AK09912_REG_ST1_DRDY_SHIFT 0
|
|
#define AK09912_REG_ST1_DRDY_MASK (1 << AK09912_REG_ST1_DRDY_SHIFT)
|
|
|
|
#define AK09912_REG_HXL 0x11
|
|
#define AK09912_REG_HXH 0x12
|
|
#define AK09912_REG_HYL 0x13
|
|
#define AK09912_REG_HYH 0x14
|
|
#define AK09912_REG_HZL 0x15
|
|
#define AK09912_REG_HZH 0x16
|
|
#define AK09912_REG_TMPS 0x17
|
|
|
|
#define AK09912_REG_ST2 0x18
|
|
#define AK09912_REG_ST2_HOFL_SHIFT 3
|
|
#define AK09912_REG_ST2_HOFL_MASK (1 << AK09912_REG_ST2_HOFL_SHIFT)
|
|
|
|
#define AK09912_REG_CNTL1 0x30
|
|
|
|
#define AK09912_REG_CNTL2 0x31
|
|
#define AK09912_REG_CNTL_MODE_POWER_DOWN 0x00
|
|
#define AK09912_REG_CNTL_MODE_ONCE 0x01
|
|
#define AK09912_REG_CNTL_MODE_SELF_TEST 0x10
|
|
#define AK09912_REG_CNTL_MODE_FUSE_ROM 0x1F
|
|
#define AK09912_REG_CNTL2_MODE_SHIFT 0
|
|
#define AK09912_REG_CNTL2_MODE_MASK (0x1F << AK09912_REG_CNTL2_MODE_SHIFT)
|
|
|
|
#define AK09912_REG_CNTL3 0x32
|
|
|
|
#define AK09912_REG_TS1 0x33
|
|
#define AK09912_REG_TS2 0x34
|
|
#define AK09912_REG_TS3 0x35
|
|
#define AK09912_REG_I2CDIS 0x36
|
|
#define AK09912_REG_TS4 0x37
|
|
|
|
#define AK09912_REG_ASAX 0x60
|
|
#define AK09912_REG_ASAY 0x61
|
|
#define AK09912_REG_ASAZ 0x62
|
|
|
|
#define AK09912_MAX_REGS AK09912_REG_ASAZ
|
|
|
|
/*
|
|
* Miscellaneous values.
|
|
*/
|
|
#define AK8975_MAX_CONVERSION_TIMEOUT 500
|
|
#define AK8975_CONVERSION_DONE_POLL_TIME 10
|
|
#define AK8975_DATA_READY_TIMEOUT ((100*HZ)/1000)
|
|
|
|
/*
|
|
* Precalculate scale factor (in Gauss units) for each axis and
|
|
* store in the device data.
|
|
*
|
|
* This scale factor is axis-dependent, and is derived from 3 calibration
|
|
* factors ASA(x), ASA(y), and ASA(z).
|
|
*
|
|
* These ASA values are read from the sensor device at start of day, and
|
|
* cached in the device context struct.
|
|
*
|
|
* Adjusting the flux value with the sensitivity adjustment value should be
|
|
* done via the following formula:
|
|
*
|
|
* Hadj = H * ( ( ( (ASA-128)*0.5 ) / 128 ) + 1 )
|
|
* where H is the raw value, ASA is the sensitivity adjustment, and Hadj
|
|
* is the resultant adjusted value.
|
|
*
|
|
* We reduce the formula to:
|
|
*
|
|
* Hadj = H * (ASA + 128) / 256
|
|
*
|
|
* H is in the range of -4096 to 4095. The magnetometer has a range of
|
|
* +-1229uT. To go from the raw value to uT is:
|
|
*
|
|
* HuT = H * 1229/4096, or roughly, 3/10.
|
|
*
|
|
* Since 1uT = 0.01 gauss, our final scale factor becomes:
|
|
*
|
|
* Hadj = H * ((ASA + 128) / 256) * 3/10 * 1/100
|
|
* Hadj = H * ((ASA + 128) * 0.003) / 256
|
|
*
|
|
* Since ASA doesn't change, we cache the resultant scale factor into the
|
|
* device context in ak8975_setup().
|
|
*
|
|
* Given we use IIO_VAL_INT_PLUS_MICRO bit when displaying the scale, we
|
|
* multiply the stored scale value by 1e6.
|
|
*/
|
|
static long ak8975_raw_to_gauss(u16 data)
|
|
{
|
|
return (((long)data + 128) * 3000) / 256;
|
|
}
|
|
|
|
/*
|
|
* For AK8963 and AK09911, same calculation, but the device is less sensitive:
|
|
*
|
|
* H is in the range of +-8190. The magnetometer has a range of
|
|
* +-4912uT. To go from the raw value to uT is:
|
|
*
|
|
* HuT = H * 4912/8190, or roughly, 6/10, instead of 3/10.
|
|
*/
|
|
|
|
static long ak8963_09911_raw_to_gauss(u16 data)
|
|
{
|
|
return (((long)data + 128) * 6000) / 256;
|
|
}
|
|
|
|
/*
|
|
* For AK09912, same calculation, except the device is more sensitive:
|
|
*
|
|
* H is in the range of -32752 to 32752. The magnetometer has a range of
|
|
* +-4912uT. To go from the raw value to uT is:
|
|
*
|
|
* HuT = H * 4912/32752, or roughly, 3/20, instead of 3/10.
|
|
*/
|
|
static long ak09912_raw_to_gauss(u16 data)
|
|
{
|
|
return (((long)data + 128) * 1500) / 256;
|
|
}
|
|
|
|
/* Compatible Asahi Kasei Compass parts */
|
|
enum asahi_compass_chipset {
|
|
AK8975,
|
|
AK8963,
|
|
AK09911,
|
|
AK09912,
|
|
AK09916,
|
|
};
|
|
|
|
enum ak_ctrl_reg_addr {
|
|
ST1,
|
|
ST2,
|
|
CNTL,
|
|
ASA_BASE,
|
|
MAX_REGS,
|
|
REGS_END,
|
|
};
|
|
|
|
enum ak_ctrl_reg_mask {
|
|
ST1_DRDY,
|
|
ST2_HOFL,
|
|
ST2_DERR,
|
|
CNTL_MODE,
|
|
MASK_END,
|
|
};
|
|
|
|
enum ak_ctrl_mode {
|
|
POWER_DOWN,
|
|
MODE_ONCE,
|
|
SELF_TEST,
|
|
FUSE_ROM,
|
|
MODE_END,
|
|
};
|
|
|
|
struct ak_def {
|
|
enum asahi_compass_chipset type;
|
|
long (*raw_to_gauss)(u16 data);
|
|
u16 range;
|
|
u8 ctrl_regs[REGS_END];
|
|
u8 ctrl_masks[MASK_END];
|
|
u8 ctrl_modes[MODE_END];
|
|
u8 data_regs[3];
|
|
};
|
|
|
|
static const struct ak_def ak_def_array[] = {
|
|
[AK8975] = {
|
|
.type = AK8975,
|
|
.raw_to_gauss = ak8975_raw_to_gauss,
|
|
.range = 4096,
|
|
.ctrl_regs = {
|
|
AK8975_REG_ST1,
|
|
AK8975_REG_ST2,
|
|
AK8975_REG_CNTL,
|
|
AK8975_REG_ASAX,
|
|
AK8975_MAX_REGS},
|
|
.ctrl_masks = {
|
|
AK8975_REG_ST1_DRDY_MASK,
|
|
AK8975_REG_ST2_HOFL_MASK,
|
|
AK8975_REG_ST2_DERR_MASK,
|
|
AK8975_REG_CNTL_MODE_MASK},
|
|
.ctrl_modes = {
|
|
AK8975_REG_CNTL_MODE_POWER_DOWN,
|
|
AK8975_REG_CNTL_MODE_ONCE,
|
|
AK8975_REG_CNTL_MODE_SELF_TEST,
|
|
AK8975_REG_CNTL_MODE_FUSE_ROM},
|
|
.data_regs = {
|
|
AK8975_REG_HXL,
|
|
AK8975_REG_HYL,
|
|
AK8975_REG_HZL},
|
|
},
|
|
[AK8963] = {
|
|
.type = AK8963,
|
|
.raw_to_gauss = ak8963_09911_raw_to_gauss,
|
|
.range = 8190,
|
|
.ctrl_regs = {
|
|
AK8975_REG_ST1,
|
|
AK8975_REG_ST2,
|
|
AK8975_REG_CNTL,
|
|
AK8975_REG_ASAX,
|
|
AK8975_MAX_REGS},
|
|
.ctrl_masks = {
|
|
AK8975_REG_ST1_DRDY_MASK,
|
|
AK8975_REG_ST2_HOFL_MASK,
|
|
0,
|
|
AK8975_REG_CNTL_MODE_MASK},
|
|
.ctrl_modes = {
|
|
AK8975_REG_CNTL_MODE_POWER_DOWN,
|
|
AK8975_REG_CNTL_MODE_ONCE,
|
|
AK8975_REG_CNTL_MODE_SELF_TEST,
|
|
AK8975_REG_CNTL_MODE_FUSE_ROM},
|
|
.data_regs = {
|
|
AK8975_REG_HXL,
|
|
AK8975_REG_HYL,
|
|
AK8975_REG_HZL},
|
|
},
|
|
[AK09911] = {
|
|
.type = AK09911,
|
|
.raw_to_gauss = ak8963_09911_raw_to_gauss,
|
|
.range = 8192,
|
|
.ctrl_regs = {
|
|
AK09912_REG_ST1,
|
|
AK09912_REG_ST2,
|
|
AK09912_REG_CNTL2,
|
|
AK09912_REG_ASAX,
|
|
AK09912_MAX_REGS},
|
|
.ctrl_masks = {
|
|
AK09912_REG_ST1_DRDY_MASK,
|
|
AK09912_REG_ST2_HOFL_MASK,
|
|
0,
|
|
AK09912_REG_CNTL2_MODE_MASK},
|
|
.ctrl_modes = {
|
|
AK09912_REG_CNTL_MODE_POWER_DOWN,
|
|
AK09912_REG_CNTL_MODE_ONCE,
|
|
AK09912_REG_CNTL_MODE_SELF_TEST,
|
|
AK09912_REG_CNTL_MODE_FUSE_ROM},
|
|
.data_regs = {
|
|
AK09912_REG_HXL,
|
|
AK09912_REG_HYL,
|
|
AK09912_REG_HZL},
|
|
},
|
|
[AK09912] = {
|
|
.type = AK09912,
|
|
.raw_to_gauss = ak09912_raw_to_gauss,
|
|
.range = 32752,
|
|
.ctrl_regs = {
|
|
AK09912_REG_ST1,
|
|
AK09912_REG_ST2,
|
|
AK09912_REG_CNTL2,
|
|
AK09912_REG_ASAX,
|
|
AK09912_MAX_REGS},
|
|
.ctrl_masks = {
|
|
AK09912_REG_ST1_DRDY_MASK,
|
|
AK09912_REG_ST2_HOFL_MASK,
|
|
0,
|
|
AK09912_REG_CNTL2_MODE_MASK},
|
|
.ctrl_modes = {
|
|
AK09912_REG_CNTL_MODE_POWER_DOWN,
|
|
AK09912_REG_CNTL_MODE_ONCE,
|
|
AK09912_REG_CNTL_MODE_SELF_TEST,
|
|
AK09912_REG_CNTL_MODE_FUSE_ROM},
|
|
.data_regs = {
|
|
AK09912_REG_HXL,
|
|
AK09912_REG_HYL,
|
|
AK09912_REG_HZL},
|
|
},
|
|
[AK09916] = {
|
|
.type = AK09916,
|
|
.raw_to_gauss = ak09912_raw_to_gauss,
|
|
.range = 32752,
|
|
.ctrl_regs = {
|
|
AK09912_REG_ST1,
|
|
AK09912_REG_ST2,
|
|
AK09912_REG_CNTL2,
|
|
AK09912_REG_ASAX,
|
|
AK09912_MAX_REGS},
|
|
.ctrl_masks = {
|
|
AK09912_REG_ST1_DRDY_MASK,
|
|
AK09912_REG_ST2_HOFL_MASK,
|
|
0,
|
|
AK09912_REG_CNTL2_MODE_MASK},
|
|
.ctrl_modes = {
|
|
AK09912_REG_CNTL_MODE_POWER_DOWN,
|
|
AK09912_REG_CNTL_MODE_ONCE,
|
|
AK09912_REG_CNTL_MODE_SELF_TEST,
|
|
AK09912_REG_CNTL_MODE_FUSE_ROM},
|
|
.data_regs = {
|
|
AK09912_REG_HXL,
|
|
AK09912_REG_HYL,
|
|
AK09912_REG_HZL},
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Per-instance context data for the device.
|
|
*/
|
|
struct ak8975_data {
|
|
struct i2c_client *client;
|
|
const struct ak_def *def;
|
|
struct mutex lock;
|
|
u8 asa[3];
|
|
long raw_to_gauss[3];
|
|
struct gpio_desc *eoc_gpiod;
|
|
struct gpio_desc *reset_gpiod;
|
|
int eoc_irq;
|
|
wait_queue_head_t data_ready_queue;
|
|
unsigned long flags;
|
|
u8 cntl_cache;
|
|
struct iio_mount_matrix orientation;
|
|
struct regulator *vdd;
|
|
struct regulator *vid;
|
|
|
|
/* Ensure natural alignment of timestamp */
|
|
struct {
|
|
s16 channels[3];
|
|
s64 ts __aligned(8);
|
|
} scan;
|
|
};
|
|
|
|
/* Enable attached power regulator if any. */
|
|
static int ak8975_power_on(const struct ak8975_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = regulator_enable(data->vdd);
|
|
if (ret) {
|
|
dev_warn(&data->client->dev,
|
|
"Failed to enable specified Vdd supply\n");
|
|
return ret;
|
|
}
|
|
ret = regulator_enable(data->vid);
|
|
if (ret) {
|
|
dev_warn(&data->client->dev,
|
|
"Failed to enable specified Vid supply\n");
|
|
regulator_disable(data->vdd);
|
|
return ret;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(data->reset_gpiod, 0);
|
|
|
|
/*
|
|
* According to the datasheet the power supply rise time is 200us
|
|
* and the minimum wait time before mode setting is 100us, in
|
|
* total 300us. Add some margin and say minimum 500us here.
|
|
*/
|
|
usleep_range(500, 1000);
|
|
return 0;
|
|
}
|
|
|
|
/* Disable attached power regulator if any. */
|
|
static void ak8975_power_off(const struct ak8975_data *data)
|
|
{
|
|
gpiod_set_value_cansleep(data->reset_gpiod, 1);
|
|
|
|
regulator_disable(data->vid);
|
|
regulator_disable(data->vdd);
|
|
}
|
|
|
|
/*
|
|
* Return 0 if the i2c device is the one we expect.
|
|
* return a negative error number otherwise
|
|
*/
|
|
static int ak8975_who_i_am(struct i2c_client *client,
|
|
enum asahi_compass_chipset type)
|
|
{
|
|
u8 wia_val[2];
|
|
int ret;
|
|
|
|
/*
|
|
* Signature for each device:
|
|
* Device | WIA1 | WIA2
|
|
* AK09916 | DEVICE_ID_| AK09916_DEVICE_ID
|
|
* AK09912 | DEVICE_ID | AK09912_DEVICE_ID
|
|
* AK09911 | DEVICE_ID | AK09911_DEVICE_ID
|
|
* AK8975 | DEVICE_ID | NA
|
|
* AK8963 | DEVICE_ID | NA
|
|
*/
|
|
ret = i2c_smbus_read_i2c_block_data_or_emulated(
|
|
client, AK09912_REG_WIA1, 2, wia_val);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error reading WIA\n");
|
|
return ret;
|
|
}
|
|
|
|
if (wia_val[0] != AK8975_DEVICE_ID)
|
|
return -ENODEV;
|
|
|
|
switch (type) {
|
|
case AK8975:
|
|
case AK8963:
|
|
return 0;
|
|
case AK09911:
|
|
if (wia_val[1] == AK09911_DEVICE_ID)
|
|
return 0;
|
|
break;
|
|
case AK09912:
|
|
if (wia_val[1] == AK09912_DEVICE_ID)
|
|
return 0;
|
|
break;
|
|
case AK09916:
|
|
if (wia_val[1] == AK09916_DEVICE_ID)
|
|
return 0;
|
|
break;
|
|
default:
|
|
dev_err(&client->dev, "Type %d unknown\n", type);
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* Helper function to write to CNTL register.
|
|
*/
|
|
static int ak8975_set_mode(struct ak8975_data *data, enum ak_ctrl_mode mode)
|
|
{
|
|
u8 regval;
|
|
int ret;
|
|
|
|
regval = (data->cntl_cache & ~data->def->ctrl_masks[CNTL_MODE]) |
|
|
data->def->ctrl_modes[mode];
|
|
ret = i2c_smbus_write_byte_data(data->client,
|
|
data->def->ctrl_regs[CNTL], regval);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
data->cntl_cache = regval;
|
|
/* After mode change wait atleast 100us */
|
|
usleep_range(100, 500);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Handle data ready irq
|
|
*/
|
|
static irqreturn_t ak8975_irq_handler(int irq, void *data)
|
|
{
|
|
struct ak8975_data *ak8975 = data;
|
|
|
|
set_bit(0, &ak8975->flags);
|
|
wake_up(&ak8975->data_ready_queue);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*
|
|
* Install data ready interrupt handler
|
|
*/
|
|
static int ak8975_setup_irq(struct ak8975_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int rc;
|
|
int irq;
|
|
|
|
init_waitqueue_head(&data->data_ready_queue);
|
|
clear_bit(0, &data->flags);
|
|
if (client->irq)
|
|
irq = client->irq;
|
|
else
|
|
irq = gpiod_to_irq(data->eoc_gpiod);
|
|
|
|
rc = devm_request_irq(&client->dev, irq, ak8975_irq_handler,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
dev_name(&client->dev), data);
|
|
if (rc < 0) {
|
|
dev_err(&client->dev, "irq %d request failed: %d\n", irq, rc);
|
|
return rc;
|
|
}
|
|
|
|
data->eoc_irq = irq;
|
|
|
|
return rc;
|
|
}
|
|
|
|
|
|
/*
|
|
* Perform some start-of-day setup, including reading the asa calibration
|
|
* values and caching them.
|
|
*/
|
|
static int ak8975_setup(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
/* Write the fused rom access mode. */
|
|
ret = ak8975_set_mode(data, FUSE_ROM);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error in setting fuse access mode\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Get asa data and store in the device data. */
|
|
ret = i2c_smbus_read_i2c_block_data_or_emulated(
|
|
client, data->def->ctrl_regs[ASA_BASE],
|
|
3, data->asa);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Not able to read asa data\n");
|
|
return ret;
|
|
}
|
|
|
|
/* After reading fuse ROM data set power-down mode */
|
|
ret = ak8975_set_mode(data, POWER_DOWN);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error in setting power-down mode\n");
|
|
return ret;
|
|
}
|
|
|
|
if (data->eoc_gpiod || client->irq > 0) {
|
|
ret = ak8975_setup_irq(data);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev,
|
|
"Error setting data ready interrupt\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
data->raw_to_gauss[0] = data->def->raw_to_gauss(data->asa[0]);
|
|
data->raw_to_gauss[1] = data->def->raw_to_gauss(data->asa[1]);
|
|
data->raw_to_gauss[2] = data->def->raw_to_gauss(data->asa[2]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_conversion_complete_gpio(struct ak8975_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
u32 timeout_ms = AK8975_MAX_CONVERSION_TIMEOUT;
|
|
int ret;
|
|
|
|
/* Wait for the conversion to complete. */
|
|
while (timeout_ms) {
|
|
msleep(AK8975_CONVERSION_DONE_POLL_TIME);
|
|
if (gpiod_get_value(data->eoc_gpiod))
|
|
break;
|
|
timeout_ms -= AK8975_CONVERSION_DONE_POLL_TIME;
|
|
}
|
|
if (!timeout_ms) {
|
|
dev_err(&client->dev, "Conversion timeout happened\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = i2c_smbus_read_byte_data(client, data->def->ctrl_regs[ST1]);
|
|
if (ret < 0)
|
|
dev_err(&client->dev, "Error in reading ST1\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wait_conversion_complete_polled(struct ak8975_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
u8 read_status;
|
|
u32 timeout_ms = AK8975_MAX_CONVERSION_TIMEOUT;
|
|
int ret;
|
|
|
|
/* Wait for the conversion to complete. */
|
|
while (timeout_ms) {
|
|
msleep(AK8975_CONVERSION_DONE_POLL_TIME);
|
|
ret = i2c_smbus_read_byte_data(client,
|
|
data->def->ctrl_regs[ST1]);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error in reading ST1\n");
|
|
return ret;
|
|
}
|
|
read_status = ret;
|
|
if (read_status)
|
|
break;
|
|
timeout_ms -= AK8975_CONVERSION_DONE_POLL_TIME;
|
|
}
|
|
if (!timeout_ms) {
|
|
dev_err(&client->dev, "Conversion timeout happened\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return read_status;
|
|
}
|
|
|
|
/* Returns 0 if the end of conversion interrupt occured or -ETIME otherwise */
|
|
static int wait_conversion_complete_interrupt(struct ak8975_data *data)
|
|
{
|
|
int ret;
|
|
|
|
ret = wait_event_timeout(data->data_ready_queue,
|
|
test_bit(0, &data->flags),
|
|
AK8975_DATA_READY_TIMEOUT);
|
|
clear_bit(0, &data->flags);
|
|
|
|
return ret > 0 ? 0 : -ETIME;
|
|
}
|
|
|
|
static int ak8975_start_read_axis(struct ak8975_data *data,
|
|
const struct i2c_client *client)
|
|
{
|
|
/* Set up the device for taking a sample. */
|
|
int ret = ak8975_set_mode(data, MODE_ONCE);
|
|
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error in setting operating mode\n");
|
|
return ret;
|
|
}
|
|
|
|
/* Wait for the conversion to complete. */
|
|
if (data->eoc_irq)
|
|
ret = wait_conversion_complete_interrupt(data);
|
|
else if (data->eoc_gpiod)
|
|
ret = wait_conversion_complete_gpio(data);
|
|
else
|
|
ret = wait_conversion_complete_polled(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* This will be executed only for non-interrupt based waiting case */
|
|
if (ret & data->def->ctrl_masks[ST1_DRDY]) {
|
|
ret = i2c_smbus_read_byte_data(client,
|
|
data->def->ctrl_regs[ST2]);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error in reading ST2\n");
|
|
return ret;
|
|
}
|
|
if (ret & (data->def->ctrl_masks[ST2_DERR] |
|
|
data->def->ctrl_masks[ST2_HOFL])) {
|
|
dev_err(&client->dev, "ST2 status error 0x%x\n", ret);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Retrieve raw flux value for one of the x, y, or z axis. */
|
|
static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val)
|
|
{
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
const struct i2c_client *client = data->client;
|
|
const struct ak_def *def = data->def;
|
|
__le16 rval;
|
|
u16 buff;
|
|
int ret;
|
|
|
|
pm_runtime_get_sync(&data->client->dev);
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
ret = ak8975_start_read_axis(data, client);
|
|
if (ret)
|
|
goto exit;
|
|
|
|
ret = i2c_smbus_read_i2c_block_data_or_emulated(
|
|
client, def->data_regs[index],
|
|
sizeof(rval), (u8*)&rval);
|
|
if (ret < 0)
|
|
goto exit;
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
pm_runtime_mark_last_busy(&data->client->dev);
|
|
pm_runtime_put_autosuspend(&data->client->dev);
|
|
|
|
/* Swap bytes and convert to valid range. */
|
|
buff = le16_to_cpu(rval);
|
|
*val = clamp_t(s16, buff, -def->range, def->range);
|
|
return IIO_VAL_INT;
|
|
|
|
exit:
|
|
mutex_unlock(&data->lock);
|
|
dev_err(&client->dev, "Error in reading axis\n");
|
|
return ret;
|
|
}
|
|
|
|
static int ak8975_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2,
|
|
long mask)
|
|
{
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
return ak8975_read_axis(indio_dev, chan->address, val);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = 0;
|
|
*val2 = data->raw_to_gauss[chan->address];
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_mount_matrix *
|
|
ak8975_get_mount_matrix(const struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
|
|
return &data->orientation;
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info ak8975_ext_info[] = {
|
|
IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, ak8975_get_mount_matrix),
|
|
{ }
|
|
};
|
|
|
|
#define AK8975_CHANNEL(axis, index) \
|
|
{ \
|
|
.type = IIO_MAGN, \
|
|
.modified = 1, \
|
|
.channel2 = IIO_MOD_##axis, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
.address = index, \
|
|
.scan_index = index, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_CPU \
|
|
}, \
|
|
.ext_info = ak8975_ext_info, \
|
|
}
|
|
|
|
static const struct iio_chan_spec ak8975_channels[] = {
|
|
AK8975_CHANNEL(X, 0), AK8975_CHANNEL(Y, 1), AK8975_CHANNEL(Z, 2),
|
|
IIO_CHAN_SOFT_TIMESTAMP(3),
|
|
};
|
|
|
|
static const unsigned long ak8975_scan_masks[] = { 0x7, 0 };
|
|
|
|
static const struct iio_info ak8975_info = {
|
|
.read_raw = &ak8975_read_raw,
|
|
};
|
|
|
|
static void ak8975_fill_buffer(struct iio_dev *indio_dev)
|
|
{
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
const struct i2c_client *client = data->client;
|
|
const struct ak_def *def = data->def;
|
|
int ret;
|
|
__le16 fval[3];
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
ret = ak8975_start_read_axis(data, client);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
/*
|
|
* For each axis, read the flux value from the appropriate register
|
|
* (the register is specified in the iio device attributes).
|
|
*/
|
|
ret = i2c_smbus_read_i2c_block_data_or_emulated(client,
|
|
def->data_regs[0],
|
|
3 * sizeof(fval[0]),
|
|
(u8 *)fval);
|
|
if (ret < 0)
|
|
goto unlock;
|
|
|
|
mutex_unlock(&data->lock);
|
|
|
|
/* Clamp to valid range. */
|
|
data->scan.channels[0] = clamp_t(s16, le16_to_cpu(fval[0]), -def->range, def->range);
|
|
data->scan.channels[1] = clamp_t(s16, le16_to_cpu(fval[1]), -def->range, def->range);
|
|
data->scan.channels[2] = clamp_t(s16, le16_to_cpu(fval[2]), -def->range, def->range);
|
|
|
|
iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
|
|
iio_get_time_ns(indio_dev));
|
|
|
|
return;
|
|
|
|
unlock:
|
|
mutex_unlock(&data->lock);
|
|
dev_err(&client->dev, "Error in reading axes block\n");
|
|
}
|
|
|
|
static irqreturn_t ak8975_handle_trigger(int irq, void *p)
|
|
{
|
|
const struct iio_poll_func *pf = p;
|
|
struct iio_dev *indio_dev = pf->indio_dev;
|
|
|
|
ak8975_fill_buffer(indio_dev);
|
|
iio_trigger_notify_done(indio_dev->trig);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int ak8975_probe(struct i2c_client *client)
|
|
{
|
|
const struct i2c_device_id *id = i2c_client_get_device_id(client);
|
|
struct ak8975_data *data;
|
|
struct iio_dev *indio_dev;
|
|
struct gpio_desc *eoc_gpiod;
|
|
struct gpio_desc *reset_gpiod;
|
|
int err;
|
|
const char *name = NULL;
|
|
|
|
/*
|
|
* Grab and set up the supplied GPIO.
|
|
* We may not have a GPIO based IRQ to scan, that is fine, we will
|
|
* poll if so.
|
|
*/
|
|
eoc_gpiod = devm_gpiod_get_optional(&client->dev, NULL, GPIOD_IN);
|
|
if (IS_ERR(eoc_gpiod))
|
|
return PTR_ERR(eoc_gpiod);
|
|
if (eoc_gpiod)
|
|
gpiod_set_consumer_name(eoc_gpiod, "ak_8975");
|
|
|
|
/*
|
|
* According to AK09911 datasheet, if reset GPIO is provided then
|
|
* deassert reset on ak8975_power_on() and assert reset on
|
|
* ak8975_power_off().
|
|
*/
|
|
reset_gpiod = devm_gpiod_get_optional(&client->dev,
|
|
"reset", GPIOD_OUT_HIGH);
|
|
if (IS_ERR(reset_gpiod))
|
|
return PTR_ERR(reset_gpiod);
|
|
|
|
/* Register with IIO */
|
|
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
data = iio_priv(indio_dev);
|
|
i2c_set_clientdata(client, indio_dev);
|
|
|
|
data->client = client;
|
|
data->eoc_gpiod = eoc_gpiod;
|
|
data->reset_gpiod = reset_gpiod;
|
|
data->eoc_irq = 0;
|
|
|
|
err = iio_read_mount_matrix(&client->dev, &data->orientation);
|
|
if (err)
|
|
return err;
|
|
|
|
/* id will be NULL when enumerated via ACPI */
|
|
data->def = i2c_get_match_data(client);
|
|
if (!data->def)
|
|
return -ENODEV;
|
|
|
|
/* If enumerated via firmware node, fix the ABI */
|
|
if (dev_fwnode(&client->dev))
|
|
name = dev_name(&client->dev);
|
|
else
|
|
name = id->name;
|
|
|
|
/* Fetch the regulators */
|
|
data->vdd = devm_regulator_get(&client->dev, "vdd");
|
|
if (IS_ERR(data->vdd))
|
|
return PTR_ERR(data->vdd);
|
|
data->vid = devm_regulator_get(&client->dev, "vid");
|
|
if (IS_ERR(data->vid))
|
|
return PTR_ERR(data->vid);
|
|
|
|
err = ak8975_power_on(data);
|
|
if (err)
|
|
return err;
|
|
|
|
err = ak8975_who_i_am(client, data->def->type);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "Unexpected device\n");
|
|
goto power_off;
|
|
}
|
|
dev_dbg(&client->dev, "Asahi compass chip %s\n", name);
|
|
|
|
/* Perform some basic start-of-day setup of the device. */
|
|
err = ak8975_setup(client);
|
|
if (err < 0) {
|
|
dev_err(&client->dev, "%s initialization fails\n", name);
|
|
goto power_off;
|
|
}
|
|
|
|
mutex_init(&data->lock);
|
|
indio_dev->channels = ak8975_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(ak8975_channels);
|
|
indio_dev->info = &ak8975_info;
|
|
indio_dev->available_scan_masks = ak8975_scan_masks;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->name = name;
|
|
|
|
err = iio_triggered_buffer_setup(indio_dev, NULL, ak8975_handle_trigger,
|
|
NULL);
|
|
if (err) {
|
|
dev_err(&client->dev, "triggered buffer setup failed\n");
|
|
goto power_off;
|
|
}
|
|
|
|
err = iio_device_register(indio_dev);
|
|
if (err) {
|
|
dev_err(&client->dev, "device register failed\n");
|
|
goto cleanup_buffer;
|
|
}
|
|
|
|
/* Enable runtime PM */
|
|
pm_runtime_get_noresume(&client->dev);
|
|
pm_runtime_set_active(&client->dev);
|
|
pm_runtime_enable(&client->dev);
|
|
/*
|
|
* The device comes online in 500us, so add two orders of magnitude
|
|
* of delay before autosuspending: 50 ms.
|
|
*/
|
|
pm_runtime_set_autosuspend_delay(&client->dev, 50);
|
|
pm_runtime_use_autosuspend(&client->dev);
|
|
pm_runtime_put(&client->dev);
|
|
|
|
return 0;
|
|
|
|
cleanup_buffer:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
power_off:
|
|
ak8975_power_off(data);
|
|
return err;
|
|
}
|
|
|
|
static void ak8975_remove(struct i2c_client *client)
|
|
{
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
|
|
pm_runtime_get_sync(&client->dev);
|
|
pm_runtime_put_noidle(&client->dev);
|
|
pm_runtime_disable(&client->dev);
|
|
iio_device_unregister(indio_dev);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
ak8975_set_mode(data, POWER_DOWN);
|
|
ak8975_power_off(data);
|
|
}
|
|
|
|
static int ak8975_runtime_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
/* Set the device in power down if it wasn't already */
|
|
ret = ak8975_set_mode(data, POWER_DOWN);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error in setting power-down mode\n");
|
|
return ret;
|
|
}
|
|
/* Next cut the regulators */
|
|
ak8975_power_off(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ak8975_runtime_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct iio_dev *indio_dev = i2c_get_clientdata(client);
|
|
struct ak8975_data *data = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
/* Take up the regulators */
|
|
ak8975_power_on(data);
|
|
/*
|
|
* We come up in powered down mode, the reading routines will
|
|
* put us in the mode to read values later.
|
|
*/
|
|
ret = ak8975_set_mode(data, POWER_DOWN);
|
|
if (ret < 0) {
|
|
dev_err(&client->dev, "Error in setting power-down mode\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEFINE_RUNTIME_DEV_PM_OPS(ak8975_dev_pm_ops, ak8975_runtime_suspend,
|
|
ak8975_runtime_resume, NULL);
|
|
|
|
static const struct acpi_device_id ak_acpi_match[] = {
|
|
{"AK8963", (kernel_ulong_t)&ak_def_array[AK8963] },
|
|
{"AK8975", (kernel_ulong_t)&ak_def_array[AK8975] },
|
|
{"AK009911", (kernel_ulong_t)&ak_def_array[AK09911] },
|
|
{"AK09911", (kernel_ulong_t)&ak_def_array[AK09911] },
|
|
{"AK09912", (kernel_ulong_t)&ak_def_array[AK09912] },
|
|
{"AKM9911", (kernel_ulong_t)&ak_def_array[AK09911] },
|
|
{"INVN6500", (kernel_ulong_t)&ak_def_array[AK8963] },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, ak_acpi_match);
|
|
|
|
static const struct i2c_device_id ak8975_id[] = {
|
|
{"AK8963", (kernel_ulong_t)&ak_def_array[AK8963] },
|
|
{"ak8963", (kernel_ulong_t)&ak_def_array[AK8963] },
|
|
{"ak8975", (kernel_ulong_t)&ak_def_array[AK8975] },
|
|
{"ak09911", (kernel_ulong_t)&ak_def_array[AK09911] },
|
|
{"ak09912", (kernel_ulong_t)&ak_def_array[AK09912] },
|
|
{"ak09916", (kernel_ulong_t)&ak_def_array[AK09916] },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ak8975_id);
|
|
|
|
static const struct of_device_id ak8975_of_match[] = {
|
|
{ .compatible = "asahi-kasei,ak8975", .data = &ak_def_array[AK8975] },
|
|
{ .compatible = "ak8975", .data = &ak_def_array[AK8975] },
|
|
{ .compatible = "asahi-kasei,ak8963", .data = &ak_def_array[AK8963] },
|
|
{ .compatible = "ak8963", .data = &ak_def_array[AK8963] },
|
|
{ .compatible = "asahi-kasei,ak09911", .data = &ak_def_array[AK09911] },
|
|
{ .compatible = "ak09911", .data = &ak_def_array[AK09911] },
|
|
{ .compatible = "asahi-kasei,ak09912", .data = &ak_def_array[AK09912] },
|
|
{ .compatible = "ak09912", .data = &ak_def_array[AK09912] },
|
|
{ .compatible = "asahi-kasei,ak09916", .data = &ak_def_array[AK09916] },
|
|
{ .compatible = "ak09916", .data = &ak_def_array[AK09916] },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ak8975_of_match);
|
|
|
|
static struct i2c_driver ak8975_driver = {
|
|
.driver = {
|
|
.name = "ak8975",
|
|
.pm = pm_ptr(&ak8975_dev_pm_ops),
|
|
.of_match_table = ak8975_of_match,
|
|
.acpi_match_table = ak_acpi_match,
|
|
},
|
|
.probe = ak8975_probe,
|
|
.remove = ak8975_remove,
|
|
.id_table = ak8975_id,
|
|
};
|
|
module_i2c_driver(ak8975_driver);
|
|
|
|
MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
|
|
MODULE_DESCRIPTION("AK8975 magnetometer driver");
|
|
MODULE_LICENSE("GPL");
|