mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
![Dave Chinner](/assets/img/avatar_default.png)
Dedicated small file workloads have been seeing significant free space fragmentation causing premature inode allocation failure when large inode sizes are in use. A particular test case showed that a workload that runs to a real ENOSPC on 256 byte inodes would fail inode allocation with ENOSPC about about 80% full with 512 byte inodes, and at about 50% full with 1024 byte inodes. The same workload, when run with -o allocsize=4096 on 1024 byte inodes would run to being 100% full before giving ENOSPC. That is, no freespace fragmentation at all. The issue was caused by the specific IO pattern the application had - the framework it was using did not support direct IO, and so it was emulating it by using fadvise(DONT_NEED). The result was that the data was getting written back before the speculative prealloc had been trimmed from memory by the close(), and so small single block files were being allocated with 2 blocks, and then having one truncated away. The result was lots of small 4k free space extents, and hence each new 8k allocation would take another 8k from contiguous free space and turn it into 4k of allocated space and 4k of free space. Hence inode allocation, which requires contiguous, aligned allocation of 16k (256 byte inodes), 32k (512 byte inodes) or 64k (1024 byte inodes) can fail to find sufficiently large freespace and hence fail while there is still lots of free space available. There's a simple fix for this, and one that has precendence in the allocator code already - don't do speculative allocation unless the size of the file is larger than a certain size. In this case, that size is the minimum default preallocation size: mp->m_writeio_blocks. And to keep with the concept of being nice to people when the files are still relatively small, cap the prealloc to mp->m_writeio_blocks until the file goes over a stripe unit is size, at which point we'll fall back to the current behaviour based on the last extent size. This will effectively turn off speculative prealloc for very small files, keep preallocation low for small files, and behave as it currently does for any file larger than a stripe unit. This completely avoids the freespace fragmentation problem this particular IO pattern was causing. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
936 lines
25 KiB
C
936 lines
25 KiB
C
/*
|
|
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
|
|
* All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it would be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write the Free Software Foundation,
|
|
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
#include "xfs.h"
|
|
#include "xfs_fs.h"
|
|
#include "xfs_log.h"
|
|
#include "xfs_trans.h"
|
|
#include "xfs_sb.h"
|
|
#include "xfs_ag.h"
|
|
#include "xfs_alloc.h"
|
|
#include "xfs_quota.h"
|
|
#include "xfs_mount.h"
|
|
#include "xfs_bmap_btree.h"
|
|
#include "xfs_alloc_btree.h"
|
|
#include "xfs_ialloc_btree.h"
|
|
#include "xfs_dinode.h"
|
|
#include "xfs_inode.h"
|
|
#include "xfs_inode_item.h"
|
|
#include "xfs_btree.h"
|
|
#include "xfs_bmap.h"
|
|
#include "xfs_rtalloc.h"
|
|
#include "xfs_error.h"
|
|
#include "xfs_itable.h"
|
|
#include "xfs_attr.h"
|
|
#include "xfs_buf_item.h"
|
|
#include "xfs_trans_space.h"
|
|
#include "xfs_utils.h"
|
|
#include "xfs_iomap.h"
|
|
#include "xfs_trace.h"
|
|
#include "xfs_icache.h"
|
|
#include "xfs_dquot_item.h"
|
|
#include "xfs_dquot.h"
|
|
|
|
|
|
#define XFS_WRITEIO_ALIGN(mp,off) (((off) >> mp->m_writeio_log) \
|
|
<< mp->m_writeio_log)
|
|
#define XFS_WRITE_IMAPS XFS_BMAP_MAX_NMAP
|
|
|
|
STATIC int
|
|
xfs_iomap_eof_align_last_fsb(
|
|
xfs_mount_t *mp,
|
|
xfs_inode_t *ip,
|
|
xfs_extlen_t extsize,
|
|
xfs_fileoff_t *last_fsb)
|
|
{
|
|
xfs_fileoff_t new_last_fsb = 0;
|
|
xfs_extlen_t align = 0;
|
|
int eof, error;
|
|
|
|
if (!XFS_IS_REALTIME_INODE(ip)) {
|
|
/*
|
|
* Round up the allocation request to a stripe unit
|
|
* (m_dalign) boundary if the file size is >= stripe unit
|
|
* size, and we are allocating past the allocation eof.
|
|
*
|
|
* If mounted with the "-o swalloc" option the alignment is
|
|
* increased from the strip unit size to the stripe width.
|
|
*/
|
|
if (mp->m_swidth && (mp->m_flags & XFS_MOUNT_SWALLOC))
|
|
align = mp->m_swidth;
|
|
else if (mp->m_dalign)
|
|
align = mp->m_dalign;
|
|
|
|
if (align && XFS_ISIZE(ip) >= XFS_FSB_TO_B(mp, align))
|
|
new_last_fsb = roundup_64(*last_fsb, align);
|
|
}
|
|
|
|
/*
|
|
* Always round up the allocation request to an extent boundary
|
|
* (when file on a real-time subvolume or has di_extsize hint).
|
|
*/
|
|
if (extsize) {
|
|
if (new_last_fsb)
|
|
align = roundup_64(new_last_fsb, extsize);
|
|
else
|
|
align = extsize;
|
|
new_last_fsb = roundup_64(*last_fsb, align);
|
|
}
|
|
|
|
if (new_last_fsb) {
|
|
error = xfs_bmap_eof(ip, new_last_fsb, XFS_DATA_FORK, &eof);
|
|
if (error)
|
|
return error;
|
|
if (eof)
|
|
*last_fsb = new_last_fsb;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
STATIC int
|
|
xfs_alert_fsblock_zero(
|
|
xfs_inode_t *ip,
|
|
xfs_bmbt_irec_t *imap)
|
|
{
|
|
xfs_alert_tag(ip->i_mount, XFS_PTAG_FSBLOCK_ZERO,
|
|
"Access to block zero in inode %llu "
|
|
"start_block: %llx start_off: %llx "
|
|
"blkcnt: %llx extent-state: %x\n",
|
|
(unsigned long long)ip->i_ino,
|
|
(unsigned long long)imap->br_startblock,
|
|
(unsigned long long)imap->br_startoff,
|
|
(unsigned long long)imap->br_blockcount,
|
|
imap->br_state);
|
|
return EFSCORRUPTED;
|
|
}
|
|
|
|
int
|
|
xfs_iomap_write_direct(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *imap,
|
|
int nmaps)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb;
|
|
xfs_fileoff_t last_fsb;
|
|
xfs_filblks_t count_fsb, resaligned;
|
|
xfs_fsblock_t firstfsb;
|
|
xfs_extlen_t extsz, temp;
|
|
int nimaps;
|
|
int bmapi_flag;
|
|
int quota_flag;
|
|
int rt;
|
|
xfs_trans_t *tp;
|
|
xfs_bmap_free_t free_list;
|
|
uint qblocks, resblks, resrtextents;
|
|
int committed;
|
|
int error;
|
|
|
|
error = xfs_qm_dqattach(ip, 0);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
rt = XFS_IS_REALTIME_INODE(ip);
|
|
extsz = xfs_get_extsz_hint(ip);
|
|
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
last_fsb = XFS_B_TO_FSB(mp, ((xfs_ufsize_t)(offset + count)));
|
|
if ((offset + count) > XFS_ISIZE(ip)) {
|
|
error = xfs_iomap_eof_align_last_fsb(mp, ip, extsz, &last_fsb);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
} else {
|
|
if (nmaps && (imap->br_startblock == HOLESTARTBLOCK))
|
|
last_fsb = MIN(last_fsb, (xfs_fileoff_t)
|
|
imap->br_blockcount +
|
|
imap->br_startoff);
|
|
}
|
|
count_fsb = last_fsb - offset_fsb;
|
|
ASSERT(count_fsb > 0);
|
|
|
|
resaligned = count_fsb;
|
|
if (unlikely(extsz)) {
|
|
if ((temp = do_mod(offset_fsb, extsz)))
|
|
resaligned += temp;
|
|
if ((temp = do_mod(resaligned, extsz)))
|
|
resaligned += extsz - temp;
|
|
}
|
|
|
|
if (unlikely(rt)) {
|
|
resrtextents = qblocks = resaligned;
|
|
resrtextents /= mp->m_sb.sb_rextsize;
|
|
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
|
|
quota_flag = XFS_QMOPT_RES_RTBLKS;
|
|
} else {
|
|
resrtextents = 0;
|
|
resblks = qblocks = XFS_DIOSTRAT_SPACE_RES(mp, resaligned);
|
|
quota_flag = XFS_QMOPT_RES_REGBLKS;
|
|
}
|
|
|
|
/*
|
|
* Allocate and setup the transaction
|
|
*/
|
|
tp = xfs_trans_alloc(mp, XFS_TRANS_DIOSTRAT);
|
|
error = xfs_trans_reserve(tp, resblks,
|
|
XFS_WRITE_LOG_RES(mp), resrtextents,
|
|
XFS_TRANS_PERM_LOG_RES,
|
|
XFS_WRITE_LOG_COUNT);
|
|
/*
|
|
* Check for running out of space, note: need lock to return
|
|
*/
|
|
if (error) {
|
|
xfs_trans_cancel(tp, 0);
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
xfs_ilock(ip, XFS_ILOCK_EXCL);
|
|
|
|
error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
|
|
if (error)
|
|
goto out_trans_cancel;
|
|
|
|
xfs_trans_ijoin(tp, ip, 0);
|
|
|
|
bmapi_flag = 0;
|
|
if (offset < XFS_ISIZE(ip) || extsz)
|
|
bmapi_flag |= XFS_BMAPI_PREALLOC;
|
|
|
|
/*
|
|
* From this point onwards we overwrite the imap pointer that the
|
|
* caller gave to us.
|
|
*/
|
|
xfs_bmap_init(&free_list, &firstfsb);
|
|
nimaps = 1;
|
|
error = xfs_bmapi_write(tp, ip, offset_fsb, count_fsb, bmapi_flag,
|
|
&firstfsb, 0, imap, &nimaps, &free_list);
|
|
if (error)
|
|
goto out_bmap_cancel;
|
|
|
|
/*
|
|
* Complete the transaction
|
|
*/
|
|
error = xfs_bmap_finish(&tp, &free_list, &committed);
|
|
if (error)
|
|
goto out_bmap_cancel;
|
|
error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
|
|
if (error)
|
|
goto out_unlock;
|
|
|
|
/*
|
|
* Copy any maps to caller's array and return any error.
|
|
*/
|
|
if (nimaps == 0) {
|
|
error = XFS_ERROR(ENOSPC);
|
|
goto out_unlock;
|
|
}
|
|
|
|
if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip)))
|
|
error = xfs_alert_fsblock_zero(ip, imap);
|
|
|
|
out_unlock:
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
return error;
|
|
|
|
out_bmap_cancel:
|
|
xfs_bmap_cancel(&free_list);
|
|
xfs_trans_unreserve_quota_nblks(tp, ip, (long)qblocks, 0, quota_flag);
|
|
out_trans_cancel:
|
|
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
|
|
goto out_unlock;
|
|
}
|
|
|
|
/*
|
|
* If the caller is doing a write at the end of the file, then extend the
|
|
* allocation out to the file system's write iosize. We clean up any extra
|
|
* space left over when the file is closed in xfs_inactive().
|
|
*
|
|
* If we find we already have delalloc preallocation beyond EOF, don't do more
|
|
* preallocation as it it not needed.
|
|
*/
|
|
STATIC int
|
|
xfs_iomap_eof_want_preallocate(
|
|
xfs_mount_t *mp,
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *imap,
|
|
int nimaps,
|
|
int *prealloc)
|
|
{
|
|
xfs_fileoff_t start_fsb;
|
|
xfs_filblks_t count_fsb;
|
|
xfs_fsblock_t firstblock;
|
|
int n, error, imaps;
|
|
int found_delalloc = 0;
|
|
|
|
*prealloc = 0;
|
|
if (offset + count <= XFS_ISIZE(ip))
|
|
return 0;
|
|
|
|
/*
|
|
* If the file is smaller than the minimum prealloc and we are using
|
|
* dynamic preallocation, don't do any preallocation at all as it is
|
|
* likely this is the only write to the file that is going to be done.
|
|
*/
|
|
if (!(mp->m_flags & XFS_MOUNT_DFLT_IOSIZE) &&
|
|
XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_writeio_blocks))
|
|
return 0;
|
|
|
|
/*
|
|
* If there are any real blocks past eof, then don't
|
|
* do any speculative allocation.
|
|
*/
|
|
start_fsb = XFS_B_TO_FSBT(mp, ((xfs_ufsize_t)(offset + count - 1)));
|
|
count_fsb = XFS_B_TO_FSB(mp, mp->m_super->s_maxbytes);
|
|
while (count_fsb > 0) {
|
|
imaps = nimaps;
|
|
firstblock = NULLFSBLOCK;
|
|
error = xfs_bmapi_read(ip, start_fsb, count_fsb, imap, &imaps,
|
|
0);
|
|
if (error)
|
|
return error;
|
|
for (n = 0; n < imaps; n++) {
|
|
if ((imap[n].br_startblock != HOLESTARTBLOCK) &&
|
|
(imap[n].br_startblock != DELAYSTARTBLOCK))
|
|
return 0;
|
|
start_fsb += imap[n].br_blockcount;
|
|
count_fsb -= imap[n].br_blockcount;
|
|
|
|
if (imap[n].br_startblock == DELAYSTARTBLOCK)
|
|
found_delalloc = 1;
|
|
}
|
|
}
|
|
if (!found_delalloc)
|
|
*prealloc = 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Determine the initial size of the preallocation. We are beyond the current
|
|
* EOF here, but we need to take into account whether this is a sparse write or
|
|
* an extending write when determining the preallocation size. Hence we need to
|
|
* look up the extent that ends at the current write offset and use the result
|
|
* to determine the preallocation size.
|
|
*
|
|
* If the extent is a hole, then preallocation is essentially disabled.
|
|
* Otherwise we take the size of the preceeding data extent as the basis for the
|
|
* preallocation size. If the size of the extent is greater than half the
|
|
* maximum extent length, then use the current offset as the basis. This ensures
|
|
* that for large files the preallocation size always extends to MAXEXTLEN
|
|
* rather than falling short due to things like stripe unit/width alignment of
|
|
* real extents.
|
|
*/
|
|
STATIC xfs_fsblock_t
|
|
xfs_iomap_eof_prealloc_initial_size(
|
|
struct xfs_mount *mp,
|
|
struct xfs_inode *ip,
|
|
xfs_off_t offset,
|
|
xfs_bmbt_irec_t *imap,
|
|
int nimaps)
|
|
{
|
|
xfs_fileoff_t start_fsb;
|
|
int imaps = 1;
|
|
int error;
|
|
|
|
ASSERT(nimaps >= imaps);
|
|
|
|
/* if we are using a specific prealloc size, return now */
|
|
if (mp->m_flags & XFS_MOUNT_DFLT_IOSIZE)
|
|
return 0;
|
|
|
|
/* If the file is small, then use the minimum prealloc */
|
|
if (XFS_ISIZE(ip) < XFS_FSB_TO_B(mp, mp->m_dalign))
|
|
return 0;
|
|
|
|
/*
|
|
* As we write multiple pages, the offset will always align to the
|
|
* start of a page and hence point to a hole at EOF. i.e. if the size is
|
|
* 4096 bytes, we only have one block at FSB 0, but XFS_B_TO_FSB(4096)
|
|
* will return FSB 1. Hence if there are blocks in the file, we want to
|
|
* point to the block prior to the EOF block and not the hole that maps
|
|
* directly at @offset.
|
|
*/
|
|
start_fsb = XFS_B_TO_FSB(mp, offset);
|
|
if (start_fsb)
|
|
start_fsb--;
|
|
error = xfs_bmapi_read(ip, start_fsb, 1, imap, &imaps, XFS_BMAPI_ENTIRE);
|
|
if (error)
|
|
return 0;
|
|
|
|
ASSERT(imaps == 1);
|
|
if (imap[0].br_startblock == HOLESTARTBLOCK)
|
|
return 0;
|
|
if (imap[0].br_blockcount <= (MAXEXTLEN >> 1))
|
|
return imap[0].br_blockcount << 1;
|
|
return XFS_B_TO_FSB(mp, offset);
|
|
}
|
|
|
|
STATIC bool
|
|
xfs_quota_need_throttle(
|
|
struct xfs_inode *ip,
|
|
int type,
|
|
xfs_fsblock_t alloc_blocks)
|
|
{
|
|
struct xfs_dquot *dq = xfs_inode_dquot(ip, type);
|
|
|
|
if (!dq || !xfs_this_quota_on(ip->i_mount, type))
|
|
return false;
|
|
|
|
/* no hi watermark, no throttle */
|
|
if (!dq->q_prealloc_hi_wmark)
|
|
return false;
|
|
|
|
/* under the lo watermark, no throttle */
|
|
if (dq->q_res_bcount + alloc_blocks < dq->q_prealloc_lo_wmark)
|
|
return false;
|
|
|
|
return true;
|
|
}
|
|
|
|
STATIC void
|
|
xfs_quota_calc_throttle(
|
|
struct xfs_inode *ip,
|
|
int type,
|
|
xfs_fsblock_t *qblocks,
|
|
int *qshift)
|
|
{
|
|
int64_t freesp;
|
|
int shift = 0;
|
|
struct xfs_dquot *dq = xfs_inode_dquot(ip, type);
|
|
|
|
/* over hi wmark, squash the prealloc completely */
|
|
if (dq->q_res_bcount >= dq->q_prealloc_hi_wmark) {
|
|
*qblocks = 0;
|
|
return;
|
|
}
|
|
|
|
freesp = dq->q_prealloc_hi_wmark - dq->q_res_bcount;
|
|
if (freesp < dq->q_low_space[XFS_QLOWSP_5_PCNT]) {
|
|
shift = 2;
|
|
if (freesp < dq->q_low_space[XFS_QLOWSP_3_PCNT])
|
|
shift += 2;
|
|
if (freesp < dq->q_low_space[XFS_QLOWSP_1_PCNT])
|
|
shift += 2;
|
|
}
|
|
|
|
/* only overwrite the throttle values if we are more aggressive */
|
|
if ((freesp >> shift) < (*qblocks >> *qshift)) {
|
|
*qblocks = freesp;
|
|
*qshift = shift;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* If we don't have a user specified preallocation size, dynamically increase
|
|
* the preallocation size as the size of the file grows. Cap the maximum size
|
|
* at a single extent or less if the filesystem is near full. The closer the
|
|
* filesystem is to full, the smaller the maximum prealocation.
|
|
*/
|
|
STATIC xfs_fsblock_t
|
|
xfs_iomap_prealloc_size(
|
|
struct xfs_mount *mp,
|
|
struct xfs_inode *ip,
|
|
xfs_off_t offset,
|
|
struct xfs_bmbt_irec *imap,
|
|
int nimaps)
|
|
{
|
|
xfs_fsblock_t alloc_blocks = 0;
|
|
int shift = 0;
|
|
int64_t freesp;
|
|
xfs_fsblock_t qblocks;
|
|
int qshift = 0;
|
|
|
|
alloc_blocks = xfs_iomap_eof_prealloc_initial_size(mp, ip, offset,
|
|
imap, nimaps);
|
|
if (!alloc_blocks)
|
|
goto check_writeio;
|
|
qblocks = alloc_blocks;
|
|
|
|
/*
|
|
* MAXEXTLEN is not a power of two value but we round the prealloc down
|
|
* to the nearest power of two value after throttling. To prevent the
|
|
* round down from unconditionally reducing the maximum supported prealloc
|
|
* size, we round up first, apply appropriate throttling, round down and
|
|
* cap the value to MAXEXTLEN.
|
|
*/
|
|
alloc_blocks = XFS_FILEOFF_MIN(roundup_pow_of_two(MAXEXTLEN),
|
|
alloc_blocks);
|
|
|
|
xfs_icsb_sync_counters(mp, XFS_ICSB_LAZY_COUNT);
|
|
freesp = mp->m_sb.sb_fdblocks;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_5_PCNT]) {
|
|
shift = 2;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_4_PCNT])
|
|
shift++;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_3_PCNT])
|
|
shift++;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_2_PCNT])
|
|
shift++;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_1_PCNT])
|
|
shift++;
|
|
}
|
|
|
|
/*
|
|
* Check each quota to cap the prealloc size and provide a shift
|
|
* value to throttle with.
|
|
*/
|
|
if (xfs_quota_need_throttle(ip, XFS_DQ_USER, alloc_blocks))
|
|
xfs_quota_calc_throttle(ip, XFS_DQ_USER, &qblocks, &qshift);
|
|
if (xfs_quota_need_throttle(ip, XFS_DQ_GROUP, alloc_blocks))
|
|
xfs_quota_calc_throttle(ip, XFS_DQ_GROUP, &qblocks, &qshift);
|
|
if (xfs_quota_need_throttle(ip, XFS_DQ_PROJ, alloc_blocks))
|
|
xfs_quota_calc_throttle(ip, XFS_DQ_PROJ, &qblocks, &qshift);
|
|
|
|
/*
|
|
* The final prealloc size is set to the minimum of free space available
|
|
* in each of the quotas and the overall filesystem.
|
|
*
|
|
* The shift throttle value is set to the maximum value as determined by
|
|
* the global low free space values and per-quota low free space values.
|
|
*/
|
|
alloc_blocks = MIN(alloc_blocks, qblocks);
|
|
shift = MAX(shift, qshift);
|
|
|
|
if (shift)
|
|
alloc_blocks >>= shift;
|
|
/*
|
|
* rounddown_pow_of_two() returns an undefined result if we pass in
|
|
* alloc_blocks = 0.
|
|
*/
|
|
if (alloc_blocks)
|
|
alloc_blocks = rounddown_pow_of_two(alloc_blocks);
|
|
if (alloc_blocks > MAXEXTLEN)
|
|
alloc_blocks = MAXEXTLEN;
|
|
|
|
/*
|
|
* If we are still trying to allocate more space than is
|
|
* available, squash the prealloc hard. This can happen if we
|
|
* have a large file on a small filesystem and the above
|
|
* lowspace thresholds are smaller than MAXEXTLEN.
|
|
*/
|
|
while (alloc_blocks && alloc_blocks >= freesp)
|
|
alloc_blocks >>= 4;
|
|
|
|
check_writeio:
|
|
if (alloc_blocks < mp->m_writeio_blocks)
|
|
alloc_blocks = mp->m_writeio_blocks;
|
|
|
|
trace_xfs_iomap_prealloc_size(ip, alloc_blocks, shift,
|
|
mp->m_writeio_blocks);
|
|
|
|
return alloc_blocks;
|
|
}
|
|
|
|
int
|
|
xfs_iomap_write_delay(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *ret_imap)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb;
|
|
xfs_fileoff_t last_fsb;
|
|
xfs_off_t aligned_offset;
|
|
xfs_fileoff_t ioalign;
|
|
xfs_extlen_t extsz;
|
|
int nimaps;
|
|
xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
|
|
int prealloc;
|
|
int error;
|
|
|
|
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
|
|
|
|
/*
|
|
* Make sure that the dquots are there. This doesn't hold
|
|
* the ilock across a disk read.
|
|
*/
|
|
error = xfs_qm_dqattach_locked(ip, 0);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
extsz = xfs_get_extsz_hint(ip);
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
|
|
error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count,
|
|
imap, XFS_WRITE_IMAPS, &prealloc);
|
|
if (error)
|
|
return error;
|
|
|
|
retry:
|
|
if (prealloc) {
|
|
xfs_fsblock_t alloc_blocks;
|
|
|
|
alloc_blocks = xfs_iomap_prealloc_size(mp, ip, offset, imap,
|
|
XFS_WRITE_IMAPS);
|
|
|
|
aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1));
|
|
ioalign = XFS_B_TO_FSBT(mp, aligned_offset);
|
|
last_fsb = ioalign + alloc_blocks;
|
|
} else {
|
|
last_fsb = XFS_B_TO_FSB(mp, ((xfs_ufsize_t)(offset + count)));
|
|
}
|
|
|
|
if (prealloc || extsz) {
|
|
error = xfs_iomap_eof_align_last_fsb(mp, ip, extsz, &last_fsb);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Make sure preallocation does not create extents beyond the range we
|
|
* actually support in this filesystem.
|
|
*/
|
|
if (last_fsb > XFS_B_TO_FSB(mp, mp->m_super->s_maxbytes))
|
|
last_fsb = XFS_B_TO_FSB(mp, mp->m_super->s_maxbytes);
|
|
|
|
ASSERT(last_fsb > offset_fsb);
|
|
|
|
nimaps = XFS_WRITE_IMAPS;
|
|
error = xfs_bmapi_delay(ip, offset_fsb, last_fsb - offset_fsb,
|
|
imap, &nimaps, XFS_BMAPI_ENTIRE);
|
|
switch (error) {
|
|
case 0:
|
|
case ENOSPC:
|
|
case EDQUOT:
|
|
break;
|
|
default:
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
/*
|
|
* If bmapi returned us nothing, we got either ENOSPC or EDQUOT. Retry
|
|
* without EOF preallocation.
|
|
*/
|
|
if (nimaps == 0) {
|
|
trace_xfs_delalloc_enospc(ip, offset, count);
|
|
if (prealloc) {
|
|
prealloc = 0;
|
|
error = 0;
|
|
goto retry;
|
|
}
|
|
return XFS_ERROR(error ? error : ENOSPC);
|
|
}
|
|
|
|
if (!(imap[0].br_startblock || XFS_IS_REALTIME_INODE(ip)))
|
|
return xfs_alert_fsblock_zero(ip, &imap[0]);
|
|
|
|
/*
|
|
* Tag the inode as speculatively preallocated so we can reclaim this
|
|
* space on demand, if necessary.
|
|
*/
|
|
if (prealloc)
|
|
xfs_inode_set_eofblocks_tag(ip);
|
|
|
|
*ret_imap = imap[0];
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Pass in a delayed allocate extent, convert it to real extents;
|
|
* return to the caller the extent we create which maps on top of
|
|
* the originating callers request.
|
|
*
|
|
* Called without a lock on the inode.
|
|
*
|
|
* We no longer bother to look at the incoming map - all we have to
|
|
* guarantee is that whatever we allocate fills the required range.
|
|
*/
|
|
int
|
|
xfs_iomap_write_allocate(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *imap)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb, last_block;
|
|
xfs_fileoff_t end_fsb, map_start_fsb;
|
|
xfs_fsblock_t first_block;
|
|
xfs_bmap_free_t free_list;
|
|
xfs_filblks_t count_fsb;
|
|
xfs_trans_t *tp;
|
|
int nimaps, committed;
|
|
int error = 0;
|
|
int nres;
|
|
|
|
/*
|
|
* Make sure that the dquots are there.
|
|
*/
|
|
error = xfs_qm_dqattach(ip, 0);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
count_fsb = imap->br_blockcount;
|
|
map_start_fsb = imap->br_startoff;
|
|
|
|
XFS_STATS_ADD(xs_xstrat_bytes, XFS_FSB_TO_B(mp, count_fsb));
|
|
|
|
while (count_fsb != 0) {
|
|
/*
|
|
* Set up a transaction with which to allocate the
|
|
* backing store for the file. Do allocations in a
|
|
* loop until we get some space in the range we are
|
|
* interested in. The other space that might be allocated
|
|
* is in the delayed allocation extent on which we sit
|
|
* but before our buffer starts.
|
|
*/
|
|
|
|
nimaps = 0;
|
|
while (nimaps == 0) {
|
|
tp = xfs_trans_alloc(mp, XFS_TRANS_STRAT_WRITE);
|
|
tp->t_flags |= XFS_TRANS_RESERVE;
|
|
nres = XFS_EXTENTADD_SPACE_RES(mp, XFS_DATA_FORK);
|
|
error = xfs_trans_reserve(tp, nres,
|
|
XFS_WRITE_LOG_RES(mp),
|
|
0, XFS_TRANS_PERM_LOG_RES,
|
|
XFS_WRITE_LOG_COUNT);
|
|
if (error) {
|
|
xfs_trans_cancel(tp, 0);
|
|
return XFS_ERROR(error);
|
|
}
|
|
xfs_ilock(ip, XFS_ILOCK_EXCL);
|
|
xfs_trans_ijoin(tp, ip, 0);
|
|
|
|
xfs_bmap_init(&free_list, &first_block);
|
|
|
|
/*
|
|
* it is possible that the extents have changed since
|
|
* we did the read call as we dropped the ilock for a
|
|
* while. We have to be careful about truncates or hole
|
|
* punchs here - we are not allowed to allocate
|
|
* non-delalloc blocks here.
|
|
*
|
|
* The only protection against truncation is the pages
|
|
* for the range we are being asked to convert are
|
|
* locked and hence a truncate will block on them
|
|
* first.
|
|
*
|
|
* As a result, if we go beyond the range we really
|
|
* need and hit an delalloc extent boundary followed by
|
|
* a hole while we have excess blocks in the map, we
|
|
* will fill the hole incorrectly and overrun the
|
|
* transaction reservation.
|
|
*
|
|
* Using a single map prevents this as we are forced to
|
|
* check each map we look for overlap with the desired
|
|
* range and abort as soon as we find it. Also, given
|
|
* that we only return a single map, having one beyond
|
|
* what we can return is probably a bit silly.
|
|
*
|
|
* We also need to check that we don't go beyond EOF;
|
|
* this is a truncate optimisation as a truncate sets
|
|
* the new file size before block on the pages we
|
|
* currently have locked under writeback. Because they
|
|
* are about to be tossed, we don't need to write them
|
|
* back....
|
|
*/
|
|
nimaps = 1;
|
|
end_fsb = XFS_B_TO_FSB(mp, XFS_ISIZE(ip));
|
|
error = xfs_bmap_last_offset(NULL, ip, &last_block,
|
|
XFS_DATA_FORK);
|
|
if (error)
|
|
goto trans_cancel;
|
|
|
|
last_block = XFS_FILEOFF_MAX(last_block, end_fsb);
|
|
if ((map_start_fsb + count_fsb) > last_block) {
|
|
count_fsb = last_block - map_start_fsb;
|
|
if (count_fsb == 0) {
|
|
error = EAGAIN;
|
|
goto trans_cancel;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* From this point onwards we overwrite the imap
|
|
* pointer that the caller gave to us.
|
|
*/
|
|
error = xfs_bmapi_write(tp, ip, map_start_fsb,
|
|
count_fsb,
|
|
XFS_BMAPI_STACK_SWITCH,
|
|
&first_block, 1,
|
|
imap, &nimaps, &free_list);
|
|
if (error)
|
|
goto trans_cancel;
|
|
|
|
error = xfs_bmap_finish(&tp, &free_list, &committed);
|
|
if (error)
|
|
goto trans_cancel;
|
|
|
|
error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
|
|
if (error)
|
|
goto error0;
|
|
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
}
|
|
|
|
/*
|
|
* See if we were able to allocate an extent that
|
|
* covers at least part of the callers request
|
|
*/
|
|
if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip)))
|
|
return xfs_alert_fsblock_zero(ip, imap);
|
|
|
|
if ((offset_fsb >= imap->br_startoff) &&
|
|
(offset_fsb < (imap->br_startoff +
|
|
imap->br_blockcount))) {
|
|
XFS_STATS_INC(xs_xstrat_quick);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* So far we have not mapped the requested part of the
|
|
* file, just surrounding data, try again.
|
|
*/
|
|
count_fsb -= imap->br_blockcount;
|
|
map_start_fsb = imap->br_startoff + imap->br_blockcount;
|
|
}
|
|
|
|
trans_cancel:
|
|
xfs_bmap_cancel(&free_list);
|
|
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
|
|
error0:
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
int
|
|
xfs_iomap_write_unwritten(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb;
|
|
xfs_filblks_t count_fsb;
|
|
xfs_filblks_t numblks_fsb;
|
|
xfs_fsblock_t firstfsb;
|
|
int nimaps;
|
|
xfs_trans_t *tp;
|
|
xfs_bmbt_irec_t imap;
|
|
xfs_bmap_free_t free_list;
|
|
xfs_fsize_t i_size;
|
|
uint resblks;
|
|
int committed;
|
|
int error;
|
|
|
|
trace_xfs_unwritten_convert(ip, offset, count);
|
|
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count);
|
|
count_fsb = (xfs_filblks_t)(count_fsb - offset_fsb);
|
|
|
|
/*
|
|
* Reserve enough blocks in this transaction for two complete extent
|
|
* btree splits. We may be converting the middle part of an unwritten
|
|
* extent and in this case we will insert two new extents in the btree
|
|
* each of which could cause a full split.
|
|
*
|
|
* This reservation amount will be used in the first call to
|
|
* xfs_bmbt_split() to select an AG with enough space to satisfy the
|
|
* rest of the operation.
|
|
*/
|
|
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1;
|
|
|
|
do {
|
|
/*
|
|
* set up a transaction to convert the range of extents
|
|
* from unwritten to real. Do allocations in a loop until
|
|
* we have covered the range passed in.
|
|
*
|
|
* Note that we open code the transaction allocation here
|
|
* to pass KM_NOFS--we can't risk to recursing back into
|
|
* the filesystem here as we might be asked to write out
|
|
* the same inode that we complete here and might deadlock
|
|
* on the iolock.
|
|
*/
|
|
sb_start_intwrite(mp->m_super);
|
|
tp = _xfs_trans_alloc(mp, XFS_TRANS_STRAT_WRITE, KM_NOFS);
|
|
tp->t_flags |= XFS_TRANS_RESERVE | XFS_TRANS_FREEZE_PROT;
|
|
error = xfs_trans_reserve(tp, resblks,
|
|
XFS_WRITE_LOG_RES(mp), 0,
|
|
XFS_TRANS_PERM_LOG_RES,
|
|
XFS_WRITE_LOG_COUNT);
|
|
if (error) {
|
|
xfs_trans_cancel(tp, 0);
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
xfs_ilock(ip, XFS_ILOCK_EXCL);
|
|
xfs_trans_ijoin(tp, ip, 0);
|
|
|
|
/*
|
|
* Modify the unwritten extent state of the buffer.
|
|
*/
|
|
xfs_bmap_init(&free_list, &firstfsb);
|
|
nimaps = 1;
|
|
error = xfs_bmapi_write(tp, ip, offset_fsb, count_fsb,
|
|
XFS_BMAPI_CONVERT, &firstfsb,
|
|
1, &imap, &nimaps, &free_list);
|
|
if (error)
|
|
goto error_on_bmapi_transaction;
|
|
|
|
/*
|
|
* Log the updated inode size as we go. We have to be careful
|
|
* to only log it up to the actual write offset if it is
|
|
* halfway into a block.
|
|
*/
|
|
i_size = XFS_FSB_TO_B(mp, offset_fsb + count_fsb);
|
|
if (i_size > offset + count)
|
|
i_size = offset + count;
|
|
|
|
i_size = xfs_new_eof(ip, i_size);
|
|
if (i_size) {
|
|
ip->i_d.di_size = i_size;
|
|
xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
|
|
}
|
|
|
|
error = xfs_bmap_finish(&tp, &free_list, &committed);
|
|
if (error)
|
|
goto error_on_bmapi_transaction;
|
|
|
|
error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
if (!(imap.br_startblock || XFS_IS_REALTIME_INODE(ip)))
|
|
return xfs_alert_fsblock_zero(ip, &imap);
|
|
|
|
if ((numblks_fsb = imap.br_blockcount) == 0) {
|
|
/*
|
|
* The numblks_fsb value should always get
|
|
* smaller, otherwise the loop is stuck.
|
|
*/
|
|
ASSERT(imap.br_blockcount);
|
|
break;
|
|
}
|
|
offset_fsb += numblks_fsb;
|
|
count_fsb -= numblks_fsb;
|
|
} while (count_fsb > 0);
|
|
|
|
return 0;
|
|
|
|
error_on_bmapi_transaction:
|
|
xfs_bmap_cancel(&free_list);
|
|
xfs_trans_cancel(tp, (XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT));
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
return XFS_ERROR(error);
|
|
}
|