mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-23 09:19:51 +00:00
![Greg Kroah-Hartman](/assets/img/avatar_default.png)
Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
468 lines
18 KiB
C
468 lines
18 KiB
C
/*
|
|
* Definitions for MCT (Magic Control Technology) USB-RS232 Converter Driver
|
|
*
|
|
* Copyright (C) 2000 Wolfgang Grandegger (wolfgang@ces.ch)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This driver is for the device MCT USB-RS232 Converter (25 pin, Model No.
|
|
* U232-P25) from Magic Control Technology Corp. (there is also a 9 pin
|
|
* Model No. U232-P9). See http://www.mct.com.tw/p_u232.html for further
|
|
* information. The properties of this device are listed at the end of this
|
|
* file. This device is available from various distributors. I know Hana,
|
|
* http://www.hana.de and D-Link, http://www.dlink.com/products/usb/dsbs25.
|
|
*
|
|
* All of the information about the device was acquired by using SniffUSB
|
|
* on Windows98. The technical details of the reverse engineering are
|
|
* summarized at the end of this file.
|
|
*/
|
|
|
|
#ifndef __LINUX_USB_SERIAL_MCT_U232_H
|
|
#define __LINUX_USB_SERIAL_MCT_U232_H
|
|
|
|
#define MCT_U232_VID 0x0711 /* Vendor Id */
|
|
#define MCT_U232_PID 0x0210 /* Original MCT Product Id */
|
|
|
|
/* U232-P25, Sitecom */
|
|
#define MCT_U232_SITECOM_PID 0x0230 /* Sitecom Product Id */
|
|
|
|
/* DU-H3SP USB BAY hub */
|
|
#define MCT_U232_DU_H3SP_PID 0x0200 /* D-Link DU-H3SP USB BAY */
|
|
|
|
/* Belkin badge the MCT U232-P9 as the F5U109 */
|
|
#define MCT_U232_BELKIN_F5U109_VID 0x050d /* Vendor Id */
|
|
#define MCT_U232_BELKIN_F5U109_PID 0x0109 /* Product Id */
|
|
|
|
/*
|
|
* Vendor Request Interface
|
|
*/
|
|
#define MCT_U232_SET_REQUEST_TYPE 0x40
|
|
#define MCT_U232_GET_REQUEST_TYPE 0xc0
|
|
|
|
/* Get Modem Status Register (MSR) */
|
|
#define MCT_U232_GET_MODEM_STAT_REQUEST 2
|
|
#define MCT_U232_GET_MODEM_STAT_SIZE 1
|
|
|
|
/* Get Line Control Register (LCR) */
|
|
/* ... not used by this driver */
|
|
#define MCT_U232_GET_LINE_CTRL_REQUEST 6
|
|
#define MCT_U232_GET_LINE_CTRL_SIZE 1
|
|
|
|
/* Set Baud Rate Divisor */
|
|
#define MCT_U232_SET_BAUD_RATE_REQUEST 5
|
|
#define MCT_U232_SET_BAUD_RATE_SIZE 4
|
|
|
|
/* Set Line Control Register (LCR) */
|
|
#define MCT_U232_SET_LINE_CTRL_REQUEST 7
|
|
#define MCT_U232_SET_LINE_CTRL_SIZE 1
|
|
|
|
/* Set Modem Control Register (MCR) */
|
|
#define MCT_U232_SET_MODEM_CTRL_REQUEST 10
|
|
#define MCT_U232_SET_MODEM_CTRL_SIZE 1
|
|
|
|
/*
|
|
* This USB device request code is not well understood. It is transmitted by
|
|
* the MCT-supplied Windows driver whenever the baud rate changes.
|
|
*/
|
|
#define MCT_U232_SET_UNKNOWN1_REQUEST 11 /* Unknown functionality */
|
|
#define MCT_U232_SET_UNKNOWN1_SIZE 1
|
|
|
|
/*
|
|
* This USB device request code appears to control whether CTS is required
|
|
* during transmission.
|
|
*
|
|
* Sending a zero byte allows data transmission to a device which is not
|
|
* asserting CTS. Sending a '1' byte will cause transmission to be deferred
|
|
* until the device asserts CTS.
|
|
*/
|
|
#define MCT_U232_SET_CTS_REQUEST 12
|
|
#define MCT_U232_SET_CTS_SIZE 1
|
|
|
|
#define MCT_U232_MAX_SIZE 4 /* of MCT_XXX_SIZE */
|
|
|
|
/*
|
|
* Baud rate (divisor)
|
|
* Actually, there are two of them, MCT website calls them "Philips solution"
|
|
* and "Intel solution". They are the regular MCT and "Sitecom" for us.
|
|
* This is pointless to document in the header, see the code for the bits.
|
|
*/
|
|
static int mct_u232_calculate_baud_rate(struct usb_serial *serial,
|
|
speed_t value, speed_t *result);
|
|
|
|
/*
|
|
* Line Control Register (LCR)
|
|
*/
|
|
#define MCT_U232_SET_BREAK 0x40
|
|
|
|
#define MCT_U232_PARITY_SPACE 0x38
|
|
#define MCT_U232_PARITY_MARK 0x28
|
|
#define MCT_U232_PARITY_EVEN 0x18
|
|
#define MCT_U232_PARITY_ODD 0x08
|
|
#define MCT_U232_PARITY_NONE 0x00
|
|
|
|
#define MCT_U232_DATA_BITS_5 0x00
|
|
#define MCT_U232_DATA_BITS_6 0x01
|
|
#define MCT_U232_DATA_BITS_7 0x02
|
|
#define MCT_U232_DATA_BITS_8 0x03
|
|
|
|
#define MCT_U232_STOP_BITS_2 0x04
|
|
#define MCT_U232_STOP_BITS_1 0x00
|
|
|
|
/*
|
|
* Modem Control Register (MCR)
|
|
*/
|
|
#define MCT_U232_MCR_NONE 0x8 /* Deactivate DTR and RTS */
|
|
#define MCT_U232_MCR_RTS 0xa /* Activate RTS */
|
|
#define MCT_U232_MCR_DTR 0x9 /* Activate DTR */
|
|
|
|
/*
|
|
* Modem Status Register (MSR)
|
|
*/
|
|
#define MCT_U232_MSR_INDEX 0x0 /* data[index] */
|
|
#define MCT_U232_MSR_CD 0x80 /* Current CD */
|
|
#define MCT_U232_MSR_RI 0x40 /* Current RI */
|
|
#define MCT_U232_MSR_DSR 0x20 /* Current DSR */
|
|
#define MCT_U232_MSR_CTS 0x10 /* Current CTS */
|
|
#define MCT_U232_MSR_DCD 0x08 /* Delta CD */
|
|
#define MCT_U232_MSR_DRI 0x04 /* Delta RI */
|
|
#define MCT_U232_MSR_DDSR 0x02 /* Delta DSR */
|
|
#define MCT_U232_MSR_DCTS 0x01 /* Delta CTS */
|
|
|
|
/*
|
|
* Line Status Register (LSR)
|
|
*/
|
|
#define MCT_U232_LSR_INDEX 1 /* data[index] */
|
|
#define MCT_U232_LSR_ERR 0x80 /* OE | PE | FE | BI */
|
|
#define MCT_U232_LSR_TEMT 0x40 /* transmit register empty */
|
|
#define MCT_U232_LSR_THRE 0x20 /* transmit holding register empty */
|
|
#define MCT_U232_LSR_BI 0x10 /* break indicator */
|
|
#define MCT_U232_LSR_FE 0x08 /* framing error */
|
|
#define MCT_U232_LSR_OE 0x02 /* overrun error */
|
|
#define MCT_U232_LSR_PE 0x04 /* parity error */
|
|
#define MCT_U232_LSR_OE 0x02 /* overrun error */
|
|
#define MCT_U232_LSR_DR 0x01 /* receive data ready */
|
|
|
|
|
|
/* -----------------------------------------------------------------------------
|
|
* Technical Specification reverse engineered with SniffUSB on Windows98
|
|
* =====================================================================
|
|
*
|
|
* The technical details of the device have been acquired be using "SniffUSB"
|
|
* and the vendor-supplied device driver (version 2.3A) under Windows98. To
|
|
* identify the USB vendor-specific requests and to assign them to terminal
|
|
* settings (flow control, baud rate, etc.) the program "SerialSettings" from
|
|
* William G. Greathouse has been proven to be very useful. I also used the
|
|
* Win98 "HyperTerminal" and "usb-robot" on Linux for testing. The results and
|
|
* observations are summarized below:
|
|
*
|
|
* The USB requests seem to be directly mapped to the registers of a 8250,
|
|
* 16450 or 16550 UART. The FreeBSD handbook (appendix F.4 "Input/Output
|
|
* devices") contains a comprehensive description of UARTs and its registers.
|
|
* The bit descriptions are actually taken from there.
|
|
*
|
|
*
|
|
* Baud rate (divisor)
|
|
* -------------------
|
|
*
|
|
* BmRequestType: 0x40 (0100 0000B)
|
|
* bRequest: 0x05
|
|
* wValue: 0x0000
|
|
* wIndex: 0x0000
|
|
* wLength: 0x0004
|
|
* Data: divisor = 115200 / baud_rate
|
|
*
|
|
* SniffUSB observations (Nov 2003): Contrary to the 'wLength' value of 4
|
|
* shown above, observations with a Belkin F5U109 adapter, using the
|
|
* MCT-supplied Windows98 driver (U2SPORT.VXD, "File version: 1.21P.0104 for
|
|
* Win98/Me"), show this request has a length of 1 byte, presumably because
|
|
* of the fact that the Belkin adapter and the 'Sitecom U232-P25' adapter
|
|
* use a baud-rate code instead of a conventional RS-232 baud rate divisor.
|
|
* The current source code for this driver does not reflect this fact, but
|
|
* the driver works fine with this adapter/driver combination nonetheless.
|
|
*
|
|
*
|
|
* Line Control Register (LCR)
|
|
* ---------------------------
|
|
*
|
|
* BmRequestType: 0x40 (0100 0000B) 0xc0 (1100 0000B)
|
|
* bRequest: 0x07 0x06
|
|
* wValue: 0x0000
|
|
* wIndex: 0x0000
|
|
* wLength: 0x0001
|
|
* Data: LCR (see below)
|
|
*
|
|
* Bit 7: Divisor Latch Access Bit (DLAB). When set, access to the data
|
|
* transmit/receive register (THR/RBR) and the Interrupt Enable Register
|
|
* (IER) is disabled. Any access to these ports is now redirected to the
|
|
* Divisor Latch Registers. Setting this bit, loading the Divisor
|
|
* Registers, and clearing DLAB should be done with interrupts disabled.
|
|
* Bit 6: Set Break. When set to "1", the transmitter begins to transmit
|
|
* continuous Spacing until this bit is set to "0". This overrides any
|
|
* bits of characters that are being transmitted.
|
|
* Bit 5: Stick Parity. When parity is enabled, setting this bit causes parity
|
|
* to always be "1" or "0", based on the value of Bit 4.
|
|
* Bit 4: Even Parity Select (EPS). When parity is enabled and Bit 5 is "0",
|
|
* setting this bit causes even parity to be transmitted and expected.
|
|
* Otherwise, odd parity is used.
|
|
* Bit 3: Parity Enable (PEN). When set to "1", a parity bit is inserted
|
|
* between the last bit of the data and the Stop Bit. The UART will also
|
|
* expect parity to be present in the received data.
|
|
* Bit 2: Number of Stop Bits (STB). If set to "1" and using 5-bit data words,
|
|
* 1.5 Stop Bits are transmitted and expected in each data word. For
|
|
* 6, 7 and 8-bit data words, 2 Stop Bits are transmitted and expected.
|
|
* When this bit is set to "0", one Stop Bit is used on each data word.
|
|
* Bit 1: Word Length Select Bit #1 (WLSB1)
|
|
* Bit 0: Word Length Select Bit #0 (WLSB0)
|
|
* Together these bits specify the number of bits in each data word.
|
|
* 1 0 Word Length
|
|
* 0 0 5 Data Bits
|
|
* 0 1 6 Data Bits
|
|
* 1 0 7 Data Bits
|
|
* 1 1 8 Data Bits
|
|
*
|
|
* SniffUSB observations: Bit 7 seems not to be used. There seem to be two bugs
|
|
* in the Win98 driver: the break does not work (bit 6 is not asserted) and the
|
|
* stick parity bit is not cleared when set once. The LCR can also be read
|
|
* back with USB request 6 but this has never been observed with SniffUSB.
|
|
*
|
|
*
|
|
* Modem Control Register (MCR)
|
|
* ----------------------------
|
|
*
|
|
* BmRequestType: 0x40 (0100 0000B)
|
|
* bRequest: 0x0a
|
|
* wValue: 0x0000
|
|
* wIndex: 0x0000
|
|
* wLength: 0x0001
|
|
* Data: MCR (Bit 4..7, see below)
|
|
*
|
|
* Bit 7: Reserved, always 0.
|
|
* Bit 6: Reserved, always 0.
|
|
* Bit 5: Reserved, always 0.
|
|
* Bit 4: Loop-Back Enable. When set to "1", the UART transmitter and receiver
|
|
* are internally connected together to allow diagnostic operations. In
|
|
* addition, the UART modem control outputs are connected to the UART
|
|
* modem control inputs. CTS is connected to RTS, DTR is connected to
|
|
* DSR, OUT1 is connected to RI, and OUT 2 is connected to DCD.
|
|
* Bit 3: OUT 2. An auxiliary output that the host processor may set high or
|
|
* low. In the IBM PC serial adapter (and most clones), OUT 2 is used
|
|
* to tri-state (disable) the interrupt signal from the
|
|
* 8250/16450/16550 UART.
|
|
* Bit 2: OUT 1. An auxiliary output that the host processor may set high or
|
|
* low. This output is not used on the IBM PC serial adapter.
|
|
* Bit 1: Request to Send (RTS). When set to "1", the output of the UART -RTS
|
|
* line is Low (Active).
|
|
* Bit 0: Data Terminal Ready (DTR). When set to "1", the output of the UART
|
|
* -DTR line is Low (Active).
|
|
*
|
|
* SniffUSB observations: Bit 2 and 4 seem not to be used but bit 3 has been
|
|
* seen _always_ set.
|
|
*
|
|
*
|
|
* Modem Status Register (MSR)
|
|
* ---------------------------
|
|
*
|
|
* BmRequestType: 0xc0 (1100 0000B)
|
|
* bRequest: 0x02
|
|
* wValue: 0x0000
|
|
* wIndex: 0x0000
|
|
* wLength: 0x0001
|
|
* Data: MSR (see below)
|
|
*
|
|
* Bit 7: Data Carrier Detect (CD). Reflects the state of the DCD line on the
|
|
* UART.
|
|
* Bit 6: Ring Indicator (RI). Reflects the state of the RI line on the UART.
|
|
* Bit 5: Data Set Ready (DSR). Reflects the state of the DSR line on the UART.
|
|
* Bit 4: Clear To Send (CTS). Reflects the state of the CTS line on the UART.
|
|
* Bit 3: Delta Data Carrier Detect (DDCD). Set to "1" if the -DCD line has
|
|
* changed state one more more times since the last time the MSR was
|
|
* read by the host.
|
|
* Bit 2: Trailing Edge Ring Indicator (TERI). Set to "1" if the -RI line has
|
|
* had a low to high transition since the last time the MSR was read by
|
|
* the host.
|
|
* Bit 1: Delta Data Set Ready (DDSR). Set to "1" if the -DSR line has changed
|
|
* state one more more times since the last time the MSR was read by the
|
|
* host.
|
|
* Bit 0: Delta Clear To Send (DCTS). Set to "1" if the -CTS line has changed
|
|
* state one more times since the last time the MSR was read by the
|
|
* host.
|
|
*
|
|
* SniffUSB observations: the MSR is also returned as first byte on the
|
|
* interrupt-in endpoint 0x83 to signal changes of modem status lines. The USB
|
|
* request to read MSR cannot be applied during normal device operation.
|
|
*
|
|
*
|
|
* Line Status Register (LSR)
|
|
* --------------------------
|
|
*
|
|
* Bit 7 Error in Receiver FIFO. On the 8250/16450 UART, this bit is zero.
|
|
* This bit is set to "1" when any of the bytes in the FIFO have one
|
|
* or more of the following error conditions: PE, FE, or BI.
|
|
* Bit 6 Transmitter Empty (TEMT). When set to "1", there are no words
|
|
* remaining in the transmit FIFO or the transmit shift register. The
|
|
* transmitter is completely idle.
|
|
* Bit 5 Transmitter Holding Register Empty (THRE). When set to "1", the
|
|
* FIFO (or holding register) now has room for at least one additional
|
|
* word to transmit. The transmitter may still be transmitting when
|
|
* this bit is set to "1".
|
|
* Bit 4 Break Interrupt (BI). The receiver has detected a Break signal.
|
|
* Bit 3 Framing Error (FE). A Start Bit was detected but the Stop Bit did
|
|
* not appear at the expected time. The received word is probably
|
|
* garbled.
|
|
* Bit 2 Parity Error (PE). The parity bit was incorrect for the word
|
|
* received.
|
|
* Bit 1 Overrun Error (OE). A new word was received and there was no room
|
|
* in the receive buffer. The newly-arrived word in the shift register
|
|
* is discarded. On 8250/16450 UARTs, the word in the holding register
|
|
* is discarded and the newly- arrived word is put in the holding
|
|
* register.
|
|
* Bit 0 Data Ready (DR). One or more words are in the receive FIFO that the
|
|
* host may read. A word must be completely received and moved from
|
|
* the shift register into the FIFO (or holding register for
|
|
* 8250/16450 designs) before this bit is set.
|
|
*
|
|
* SniffUSB observations: the LSR is returned as second byte on the
|
|
* interrupt-in endpoint 0x83 to signal error conditions. Such errors have
|
|
* been seen with minicom/zmodem transfers (CRC errors).
|
|
*
|
|
*
|
|
* Unknown #1
|
|
* -------------------
|
|
*
|
|
* BmRequestType: 0x40 (0100 0000B)
|
|
* bRequest: 0x0b
|
|
* wValue: 0x0000
|
|
* wIndex: 0x0000
|
|
* wLength: 0x0001
|
|
* Data: 0x00
|
|
*
|
|
* SniffUSB observations (Nov 2003): With the MCT-supplied Windows98 driver
|
|
* (U2SPORT.VXD, "File version: 1.21P.0104 for Win98/Me"), this request
|
|
* occurs immediately after a "Baud rate (divisor)" message. It was not
|
|
* observed at any other time. It is unclear what purpose this message
|
|
* serves.
|
|
*
|
|
*
|
|
* Unknown #2
|
|
* -------------------
|
|
*
|
|
* BmRequestType: 0x40 (0100 0000B)
|
|
* bRequest: 0x0c
|
|
* wValue: 0x0000
|
|
* wIndex: 0x0000
|
|
* wLength: 0x0001
|
|
* Data: 0x00
|
|
*
|
|
* SniffUSB observations (Nov 2003): With the MCT-supplied Windows98 driver
|
|
* (U2SPORT.VXD, "File version: 1.21P.0104 for Win98/Me"), this request
|
|
* occurs immediately after the 'Unknown #1' message (see above). It was
|
|
* not observed at any other time. It is unclear what other purpose (if
|
|
* any) this message might serve, but without it, the USB/RS-232 adapter
|
|
* will not write to RS-232 devices which do not assert the 'CTS' signal.
|
|
*
|
|
*
|
|
* Flow control
|
|
* ------------
|
|
*
|
|
* SniffUSB observations: no flow control specific requests have been realized
|
|
* apart from DTR/RTS settings. Both signals are dropped for no flow control
|
|
* but asserted for hardware or software flow control.
|
|
*
|
|
*
|
|
* Endpoint usage
|
|
* --------------
|
|
*
|
|
* SniffUSB observations: the bulk-out endpoint 0x1 and interrupt-in endpoint
|
|
* 0x81 is used to transmit and receive characters. The second interrupt-in
|
|
* endpoint 0x83 signals exceptional conditions like modem line changes and
|
|
* errors. The first byte returned is the MSR and the second byte the LSR.
|
|
*
|
|
*
|
|
* Other observations
|
|
* ------------------
|
|
*
|
|
* Queued bulk transfers like used in visor.c did not work.
|
|
*
|
|
*
|
|
* Properties of the USB device used (as found in /var/log/messages)
|
|
* -----------------------------------------------------------------
|
|
*
|
|
* Manufacturer: MCT Corporation.
|
|
* Product: USB-232 Interfact Controller
|
|
* SerialNumber: U2S22050
|
|
*
|
|
* Length = 18
|
|
* DescriptorType = 01
|
|
* USB version = 1.00
|
|
* Vendor:Product = 0711:0210
|
|
* MaxPacketSize0 = 8
|
|
* NumConfigurations = 1
|
|
* Device version = 1.02
|
|
* Device Class:SubClass:Protocol = 00:00:00
|
|
* Per-interface classes
|
|
* Configuration:
|
|
* bLength = 9
|
|
* bDescriptorType = 02
|
|
* wTotalLength = 0027
|
|
* bNumInterfaces = 01
|
|
* bConfigurationValue = 01
|
|
* iConfiguration = 00
|
|
* bmAttributes = c0
|
|
* MaxPower = 100mA
|
|
*
|
|
* Interface: 0
|
|
* Alternate Setting: 0
|
|
* bLength = 9
|
|
* bDescriptorType = 04
|
|
* bInterfaceNumber = 00
|
|
* bAlternateSetting = 00
|
|
* bNumEndpoints = 03
|
|
* bInterface Class:SubClass:Protocol = 00:00:00
|
|
* iInterface = 00
|
|
* Endpoint:
|
|
* bLength = 7
|
|
* bDescriptorType = 05
|
|
* bEndpointAddress = 81 (in)
|
|
* bmAttributes = 03 (Interrupt)
|
|
* wMaxPacketSize = 0040
|
|
* bInterval = 02
|
|
* Endpoint:
|
|
* bLength = 7
|
|
* bDescriptorType = 05
|
|
* bEndpointAddress = 01 (out)
|
|
* bmAttributes = 02 (Bulk)
|
|
* wMaxPacketSize = 0040
|
|
* bInterval = 00
|
|
* Endpoint:
|
|
* bLength = 7
|
|
* bDescriptorType = 05
|
|
* bEndpointAddress = 83 (in)
|
|
* bmAttributes = 03 (Interrupt)
|
|
* wMaxPacketSize = 0002
|
|
* bInterval = 02
|
|
*
|
|
*
|
|
* Hardware details (added by Martin Hamilton, 2001/12/06)
|
|
* -----------------------------------------------------------------
|
|
*
|
|
* This info was gleaned from opening a Belkin F5U109 DB9 USB serial
|
|
* adaptor, which turns out to simply be a re-badged U232-P9. We
|
|
* know this because there is a sticky label on the circuit board
|
|
* which says "U232-P9" ;-)
|
|
*
|
|
* The circuit board inside the adaptor contains a Philips PDIUSBD12
|
|
* USB endpoint chip and a Philips P87C52UBAA microcontroller with
|
|
* embedded UART. Exhaustive documentation for these is available at:
|
|
*
|
|
* http://www.semiconductors.philips.com/pip/p87c52ubaa
|
|
* http://www.semiconductors.philips.com/pip/pdiusbd12
|
|
*
|
|
* Thanks to Julian Highfield for the pointer to the Philips database.
|
|
*
|
|
*/
|
|
|
|
#endif /* __LINUX_USB_SERIAL_MCT_U232_H */
|
|
|