Magnus Damm 1ce4da7a50 sh: MSIOF/mmc_spi platform data for the Ecovec24 board ... This patch adds MSIOF and mmc_spi platform data for the CN11 port on the SuperH Ecovec24 board. No card detect interrupt is available so the MMC code is configured to poll. The WP signal is implemented together with CD and power control. The board only supports 3.3V power. The platform data is wrapped in SDHI #ifdefs to allow both the SDHI and the MSIOF to coexist. Only one configuration is allowed at a time. The pin routing is selected by a dip switch but we can unfortunately not detect this setting at run time. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>		2009-12-15 12:10:44 +09:00
..
mach-ap325rxa	sh: mach-ap325rxa: Add SOCAM_DATA_ACTIVE_HIGH flags for soc-camera	2009-12-09 12:40:47 +09:00
mach-cayman	sh: Move out cayman-specific panic handler code to its own file.	2009-05-08 17:41:59 +09:00
mach-dreamcast	sh: magicpanelr2 and dreamcast can use the generic I/O base.	2009-09-28 15:22:10 +09:00
mach-ecovec24	sh: MSIOF/mmc_spi platform data for the Ecovec24 board	2009-12-15 12:10:44 +09:00
mach-edosk7705	sh: mach-edosk7705: Fix up edosk7705 so it all builds again.	2008-12-22 18:44:45 +09:00
mach-highlander	sh: Make sure indexes are positive	2009-11-04 11:48:07 +09:00
mach-hp6xx	ALSA: sh: add SuperH DAC audio driver for ALSA V4	2009-11-04 09:17:40 +01:00
mach-kfr2r09	sh: LCDC start_transfer() for the KFR2R09 board	2009-12-09 12:40:45 +09:00
mach-landisk	sh: Remove BKL from landisk gio.	2009-10-16 14:42:33 +09:00
mach-lboxre2	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-microdev	sh: mach-microdev: Split out the fdc37c93xapm initialization code.	2008-12-22 18:44:45 +09:00
mach-migor	sh: Move KEYSC header file	2009-11-30 12:02:51 +09:00
mach-r2d	sh: Make sure indexes are positive	2009-11-04 11:48:07 +09:00
mach-rsk	sh: rsk7203 CONFIG_MTD=n fix	2009-10-26 19:46:24 +09:00
mach-sdk7780	sh: Migrate common board headers to mach-common/.	2008-10-20 13:02:48 +09:00
mach-se	sh: ms7724se: Add ak4642 support	2009-12-15 12:07:37 +09:00
mach-sh03	sh: mach-sh03: Give the sh03 rtc its own spinlock.	2009-05-08 16:57:35 +09:00
mach-sh7763rdp	sh: sh7763rdp: Change IRQ number for sh_eth of sh7763rdp	2009-03-17 15:20:59 +09:00
mach-snapgear	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-systemh	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-titan	sh: pci: Kill off dead references to is_pci_ioaddr and friends.	2009-04-20 19:39:57 +09:00
mach-x3proto	usb: m66592-udc platform data on_chip support	2009-07-23 13:04:15 +09:00
board-edosk7760.c	sh: edosk7760: Correct size of bootloader flash partition.	2008-09-21 10:32:29 +09:00
board-espt.c	sh: espt-giga board support	2009-03-17 15:18:52 +09:00
board-magicpanelr2.c	sh: magicpanelr2 and dreamcast can use the generic I/O base.	2009-09-28 15:22:10 +09:00
board-polaris.c	sh: add support for SMSC Polaris platform	2009-03-21 01:26:33 +09:00
board-sh7785lcr.c	sh: Fix up build warning for SH7785LCR proto board.	2009-09-01 22:38:27 +09:00
board-shmin.c	sh: board-shmin: Convert shmin to use __set_io_port_base().	2008-12-22 18:44:45 +09:00
board-urquell.c	sh: urquell: Add system FPGA mode pin support.	2009-06-15 19:02:37 +09:00
Kconfig	sh: disable trapped I/O on SH7785LCR.	2009-09-01 22:37:10 +09:00
Makefile	sh: Move ap325rxa board code into separate directory	2009-10-30 14:33:43 +09:00