mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 03:10:12 +00:00
![Tom Rix](/assets/img/avatar_default.png)
Run the fpga subsystem through aspell. Signed-off-by: Tom Rix <trix@redhat.com> Reviewed-by: Fernando Pacheco <fpacheco@redhat.com> Signed-off-by: Moritz Fischer <mdf@kernel.org>
588 lines
18 KiB
C
588 lines
18 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* DFL device driver for Nios private feature on Intel PAC (Programmable
|
|
* Acceleration Card) N3000
|
|
*
|
|
* Copyright (C) 2019-2020 Intel Corporation, Inc.
|
|
*
|
|
* Authors:
|
|
* Wu Hao <hao.wu@intel.com>
|
|
* Xu Yilun <yilun.xu@intel.com>
|
|
*/
|
|
#include <linux/bitfield.h>
|
|
#include <linux/dfl.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/io.h>
|
|
#include <linux/io-64-nonatomic-lo-hi.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/spi/altera.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/types.h>
|
|
|
|
/*
|
|
* N3000 Nios private feature registers, named as NIOS_SPI_XX on spec.
|
|
* NS is the abbreviation of NIOS_SPI.
|
|
*/
|
|
#define N3000_NS_PARAM 0x8
|
|
#define N3000_NS_PARAM_SHIFT_MODE_MSK BIT_ULL(1)
|
|
#define N3000_NS_PARAM_SHIFT_MODE_MSB 0
|
|
#define N3000_NS_PARAM_SHIFT_MODE_LSB 1
|
|
#define N3000_NS_PARAM_DATA_WIDTH GENMASK_ULL(7, 2)
|
|
#define N3000_NS_PARAM_NUM_CS GENMASK_ULL(13, 8)
|
|
#define N3000_NS_PARAM_CLK_POL BIT_ULL(14)
|
|
#define N3000_NS_PARAM_CLK_PHASE BIT_ULL(15)
|
|
#define N3000_NS_PARAM_PERIPHERAL_ID GENMASK_ULL(47, 32)
|
|
|
|
#define N3000_NS_CTRL 0x10
|
|
#define N3000_NS_CTRL_WR_DATA GENMASK_ULL(31, 0)
|
|
#define N3000_NS_CTRL_ADDR GENMASK_ULL(44, 32)
|
|
#define N3000_NS_CTRL_CMD_MSK GENMASK_ULL(63, 62)
|
|
#define N3000_NS_CTRL_CMD_NOP 0
|
|
#define N3000_NS_CTRL_CMD_RD 1
|
|
#define N3000_NS_CTRL_CMD_WR 2
|
|
|
|
#define N3000_NS_STAT 0x18
|
|
#define N3000_NS_STAT_RD_DATA GENMASK_ULL(31, 0)
|
|
#define N3000_NS_STAT_RW_VAL BIT_ULL(32)
|
|
|
|
/* Nios handshake registers, indirect access */
|
|
#define N3000_NIOS_INIT 0x1000
|
|
#define N3000_NIOS_INIT_DONE BIT(0)
|
|
#define N3000_NIOS_INIT_START BIT(1)
|
|
/* Mode for retimer A, link 0, the same below */
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK GENMASK(9, 8)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK GENMASK(11, 10)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK GENMASK(13, 12)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK GENMASK(15, 14)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK GENMASK(17, 16)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK GENMASK(19, 18)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK GENMASK(21, 20)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK GENMASK(23, 22)
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_NO 0x0
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_KR 0x1
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_RS 0x2
|
|
|
|
#define N3000_NIOS_FW_VERSION 0x1004
|
|
#define N3000_NIOS_FW_VERSION_PATCH GENMASK(23, 20)
|
|
#define N3000_NIOS_FW_VERSION_MINOR GENMASK(27, 24)
|
|
#define N3000_NIOS_FW_VERSION_MAJOR GENMASK(31, 28)
|
|
|
|
/* The retimers we use on Intel PAC N3000 is Parkvale, abbreviated to PKVL */
|
|
#define N3000_NIOS_PKVL_A_MODE_STS 0x1020
|
|
#define N3000_NIOS_PKVL_B_MODE_STS 0x1024
|
|
#define N3000_NIOS_PKVL_MODE_STS_GROUP_MSK GENMASK(15, 8)
|
|
#define N3000_NIOS_PKVL_MODE_STS_GROUP_OK 0x0
|
|
#define N3000_NIOS_PKVL_MODE_STS_ID_MSK GENMASK(7, 0)
|
|
/* When GROUP MASK field == GROUP_OK */
|
|
#define N3000_NIOS_PKVL_MODE_ID_RESET 0x0
|
|
#define N3000_NIOS_PKVL_MODE_ID_4X10G 0x1
|
|
#define N3000_NIOS_PKVL_MODE_ID_4X25G 0x2
|
|
#define N3000_NIOS_PKVL_MODE_ID_2X25G 0x3
|
|
#define N3000_NIOS_PKVL_MODE_ID_2X25G_2X10G 0x4
|
|
#define N3000_NIOS_PKVL_MODE_ID_1X25G 0x5
|
|
|
|
#define N3000_NIOS_REGBUS_RETRY_COUNT 10000 /* loop count */
|
|
|
|
#define N3000_NIOS_INIT_TIMEOUT 10000000 /* usec */
|
|
#define N3000_NIOS_INIT_TIME_INTV 100000 /* usec */
|
|
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL \
|
|
(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK | \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK | \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK | \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK | \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK | \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK | \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK | \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK)
|
|
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL \
|
|
(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_NO))
|
|
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL \
|
|
(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_KR))
|
|
|
|
#define N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL \
|
|
(FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \
|
|
FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \
|
|
N3000_NIOS_INIT_REQ_FEC_MODE_RS))
|
|
|
|
struct n3000_nios {
|
|
void __iomem *base;
|
|
struct regmap *regmap;
|
|
struct device *dev;
|
|
struct platform_device *altera_spi;
|
|
};
|
|
|
|
static ssize_t nios_fw_version_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct n3000_nios *nn = dev_get_drvdata(dev);
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sysfs_emit(buf, "%x.%x.%x\n",
|
|
(u8)FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val),
|
|
(u8)FIELD_GET(N3000_NIOS_FW_VERSION_MINOR, val),
|
|
(u8)FIELD_GET(N3000_NIOS_FW_VERSION_PATCH, val));
|
|
}
|
|
static DEVICE_ATTR_RO(nios_fw_version);
|
|
|
|
#define IS_MODE_STATUS_OK(mode_stat) \
|
|
(FIELD_GET(N3000_NIOS_PKVL_MODE_STS_GROUP_MSK, (mode_stat)) == \
|
|
N3000_NIOS_PKVL_MODE_STS_GROUP_OK)
|
|
|
|
#define IS_RETIMER_FEC_SUPPORTED(retimer_mode) \
|
|
((retimer_mode) != N3000_NIOS_PKVL_MODE_ID_RESET && \
|
|
(retimer_mode) != N3000_NIOS_PKVL_MODE_ID_4X10G)
|
|
|
|
static int get_retimer_mode(struct n3000_nios *nn, unsigned int mode_stat_reg,
|
|
unsigned int *retimer_mode)
|
|
{
|
|
unsigned int val;
|
|
int ret;
|
|
|
|
ret = regmap_read(nn->regmap, mode_stat_reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!IS_MODE_STATUS_OK(val))
|
|
return -EFAULT;
|
|
|
|
*retimer_mode = FIELD_GET(N3000_NIOS_PKVL_MODE_STS_ID_MSK, val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t retimer_A_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct n3000_nios *nn = dev_get_drvdata(dev);
|
|
unsigned int mode;
|
|
int ret;
|
|
|
|
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sysfs_emit(buf, "0x%x\n", mode);
|
|
}
|
|
static DEVICE_ATTR_RO(retimer_A_mode);
|
|
|
|
static ssize_t retimer_B_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
struct n3000_nios *nn = dev_get_drvdata(dev);
|
|
unsigned int mode;
|
|
int ret;
|
|
|
|
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return sysfs_emit(buf, "0x%x\n", mode);
|
|
}
|
|
static DEVICE_ATTR_RO(retimer_B_mode);
|
|
|
|
static ssize_t fec_mode_show(struct device *dev,
|
|
struct device_attribute *attr, char *buf)
|
|
{
|
|
unsigned int val, retimer_a_mode, retimer_b_mode, fec_modes;
|
|
struct n3000_nios *nn = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
/* FEC mode setting is not supported in early FW versions */
|
|
ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) < 3)
|
|
return sysfs_emit(buf, "not supported\n");
|
|
|
|
/* If no 25G links, FEC mode setting is not supported either */
|
|
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &retimer_a_mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &retimer_b_mode);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!IS_RETIMER_FEC_SUPPORTED(retimer_a_mode) &&
|
|
!IS_RETIMER_FEC_SUPPORTED(retimer_b_mode))
|
|
return sysfs_emit(buf, "not supported\n");
|
|
|
|
/* get the valid FEC mode for 25G links */
|
|
ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* FEC mode should always be the same for all links, as we set them
|
|
* in this way.
|
|
*/
|
|
fec_modes = (val & N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL);
|
|
if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL)
|
|
return sysfs_emit(buf, "no\n");
|
|
else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL)
|
|
return sysfs_emit(buf, "kr\n");
|
|
else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL)
|
|
return sysfs_emit(buf, "rs\n");
|
|
|
|
return -EFAULT;
|
|
}
|
|
static DEVICE_ATTR_RO(fec_mode);
|
|
|
|
static struct attribute *n3000_nios_attrs[] = {
|
|
&dev_attr_nios_fw_version.attr,
|
|
&dev_attr_retimer_A_mode.attr,
|
|
&dev_attr_retimer_B_mode.attr,
|
|
&dev_attr_fec_mode.attr,
|
|
NULL,
|
|
};
|
|
ATTRIBUTE_GROUPS(n3000_nios);
|
|
|
|
static int n3000_nios_init_done_check(struct n3000_nios *nn)
|
|
{
|
|
unsigned int val, state_a, state_b;
|
|
struct device *dev = nn->dev;
|
|
int ret, ret2;
|
|
|
|
/*
|
|
* The SPI is shared by the Nios core inside the FPGA, Nios will use
|
|
* this SPI master to do some one time initialization after power up,
|
|
* and then release the control to OS. The driver needs to poll on
|
|
* INIT_DONE to see when driver could take the control.
|
|
*
|
|
* Please note that after Nios firmware version 3.0.0, INIT_START is
|
|
* introduced, so driver needs to trigger START firstly and then check
|
|
* INIT_DONE.
|
|
*/
|
|
|
|
ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* If Nios version register is totally uninitialized(== 0x0), then the
|
|
* Nios firmware is missing. So host could take control of SPI master
|
|
* safely, but initialization work for Nios is not done. To restore the
|
|
* card, we need to reprogram a new Nios firmware via the BMC chip on
|
|
* SPI bus. So the driver doesn't error out, it continues to create the
|
|
* spi controller device and spi_board_info for BMC.
|
|
*/
|
|
if (val == 0) {
|
|
dev_err(dev, "Nios version reg = 0x%x, skip INIT_DONE check, but the retimer may be uninitialized\n",
|
|
val);
|
|
return 0;
|
|
}
|
|
|
|
if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) >= 3) {
|
|
/* read NIOS_INIT to check if retimer initialization is done */
|
|
ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* check if retimers are initialized already */
|
|
if (val & (N3000_NIOS_INIT_DONE | N3000_NIOS_INIT_START))
|
|
goto nios_init_done;
|
|
|
|
/* configure FEC mode per module param */
|
|
val = N3000_NIOS_INIT_START;
|
|
|
|
/*
|
|
* When the retimer is to be set to 10G mode, there is no FEC
|
|
* mode setting, so the REQ_FEC_MODE field will be ignored by
|
|
* Nios firmware in this case. But we should still fill the FEC
|
|
* mode field cause host could not get the retimer working mode
|
|
* until the Nios init is done.
|
|
*
|
|
* For now the driver doesn't support the retimer FEC mode
|
|
* switching per user's request. It is always set to Reed
|
|
* Solomon FEC.
|
|
*
|
|
* The driver will set the same FEC mode for all links.
|
|
*/
|
|
val |= N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL;
|
|
|
|
ret = regmap_write(nn->regmap, N3000_NIOS_INIT, val);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
nios_init_done:
|
|
/* polls on NIOS_INIT_DONE */
|
|
ret = regmap_read_poll_timeout(nn->regmap, N3000_NIOS_INIT, val,
|
|
val & N3000_NIOS_INIT_DONE,
|
|
N3000_NIOS_INIT_TIME_INTV,
|
|
N3000_NIOS_INIT_TIMEOUT);
|
|
if (ret)
|
|
dev_err(dev, "NIOS_INIT_DONE %s\n",
|
|
(ret == -ETIMEDOUT) ? "timed out" : "check error");
|
|
|
|
ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_A_MODE_STS, &state_a);
|
|
if (ret2)
|
|
return ret2;
|
|
|
|
ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_B_MODE_STS, &state_b);
|
|
if (ret2)
|
|
return ret2;
|
|
|
|
if (!ret) {
|
|
/*
|
|
* After INIT_DONE is detected, it still needs to check if the
|
|
* Nios firmware reports any error during the retimer
|
|
* configuration.
|
|
*/
|
|
if (IS_MODE_STATUS_OK(state_a) && IS_MODE_STATUS_OK(state_b))
|
|
return 0;
|
|
|
|
/*
|
|
* If the retimer configuration is failed, the Nios firmware
|
|
* will still release the spi controller for host to
|
|
* communicate with the BMC. It makes possible for people to
|
|
* reprogram a new Nios firmware and restore the card. So the
|
|
* driver doesn't error out, it continues to create the spi
|
|
* controller device and spi_board_info for BMC.
|
|
*/
|
|
dev_err(dev, "NIOS_INIT_DONE OK, but err on retimer init\n");
|
|
}
|
|
|
|
dev_err(nn->dev, "PKVL_A_MODE_STS 0x%x\n", state_a);
|
|
dev_err(nn->dev, "PKVL_B_MODE_STS 0x%x\n", state_b);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct spi_board_info m10_n3000_info = {
|
|
.modalias = "m10-n3000",
|
|
.max_speed_hz = 12500000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
};
|
|
|
|
static int create_altera_spi_controller(struct n3000_nios *nn)
|
|
{
|
|
struct altera_spi_platform_data pdata = { 0 };
|
|
struct platform_device_info pdevinfo = { 0 };
|
|
void __iomem *base = nn->base;
|
|
u64 v;
|
|
|
|
v = readq(base + N3000_NS_PARAM);
|
|
|
|
pdata.mode_bits = SPI_CS_HIGH;
|
|
if (FIELD_GET(N3000_NS_PARAM_CLK_POL, v))
|
|
pdata.mode_bits |= SPI_CPOL;
|
|
if (FIELD_GET(N3000_NS_PARAM_CLK_PHASE, v))
|
|
pdata.mode_bits |= SPI_CPHA;
|
|
|
|
pdata.num_chipselect = FIELD_GET(N3000_NS_PARAM_NUM_CS, v);
|
|
pdata.bits_per_word_mask =
|
|
SPI_BPW_RANGE_MASK(1, FIELD_GET(N3000_NS_PARAM_DATA_WIDTH, v));
|
|
|
|
pdata.num_devices = 1;
|
|
pdata.devices = &m10_n3000_info;
|
|
|
|
dev_dbg(nn->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__,
|
|
pdata.num_chipselect, pdata.bits_per_word_mask,
|
|
pdata.mode_bits);
|
|
|
|
pdevinfo.name = "subdev_spi_altera";
|
|
pdevinfo.id = PLATFORM_DEVID_AUTO;
|
|
pdevinfo.parent = nn->dev;
|
|
pdevinfo.data = &pdata;
|
|
pdevinfo.size_data = sizeof(pdata);
|
|
|
|
nn->altera_spi = platform_device_register_full(&pdevinfo);
|
|
return PTR_ERR_OR_ZERO(nn->altera_spi);
|
|
}
|
|
|
|
static void destroy_altera_spi_controller(struct n3000_nios *nn)
|
|
{
|
|
platform_device_unregister(nn->altera_spi);
|
|
}
|
|
|
|
static int n3000_nios_poll_stat_timeout(void __iomem *base, u64 *v)
|
|
{
|
|
int loops;
|
|
|
|
/*
|
|
* We don't use the time based timeout here for performance.
|
|
*
|
|
* The regbus read/write is on the critical path of Intel PAC N3000
|
|
* image programming. The time based timeout checking will add too much
|
|
* overhead on it. Usually the state changes in 1 or 2 loops on the
|
|
* test server, and we set 10000 times loop here for safety.
|
|
*/
|
|
for (loops = N3000_NIOS_REGBUS_RETRY_COUNT; loops > 0 ; loops--) {
|
|
*v = readq(base + N3000_NS_STAT);
|
|
if (*v & N3000_NS_STAT_RW_VAL)
|
|
break;
|
|
cpu_relax();
|
|
}
|
|
|
|
return (loops > 0) ? 0 : -ETIMEDOUT;
|
|
}
|
|
|
|
static int n3000_nios_reg_write(void *context, unsigned int reg, unsigned int val)
|
|
{
|
|
struct n3000_nios *nn = context;
|
|
u64 v;
|
|
int ret;
|
|
|
|
v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_WR) |
|
|
FIELD_PREP(N3000_NS_CTRL_ADDR, reg) |
|
|
FIELD_PREP(N3000_NS_CTRL_WR_DATA, val);
|
|
writeq(v, nn->base + N3000_NS_CTRL);
|
|
|
|
ret = n3000_nios_poll_stat_timeout(nn->base, &v);
|
|
if (ret)
|
|
dev_err(nn->dev, "fail to write reg 0x%x val 0x%x: %d\n",
|
|
reg, val, ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int n3000_nios_reg_read(void *context, unsigned int reg, unsigned int *val)
|
|
{
|
|
struct n3000_nios *nn = context;
|
|
u64 v;
|
|
int ret;
|
|
|
|
v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_RD) |
|
|
FIELD_PREP(N3000_NS_CTRL_ADDR, reg);
|
|
writeq(v, nn->base + N3000_NS_CTRL);
|
|
|
|
ret = n3000_nios_poll_stat_timeout(nn->base, &v);
|
|
if (ret)
|
|
dev_err(nn->dev, "fail to read reg 0x%x: %d\n", reg, ret);
|
|
else
|
|
*val = FIELD_GET(N3000_NS_STAT_RD_DATA, v);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct regmap_config n3000_nios_regbus_cfg = {
|
|
.reg_bits = 32,
|
|
.reg_stride = 4,
|
|
.val_bits = 32,
|
|
.fast_io = true,
|
|
|
|
.reg_write = n3000_nios_reg_write,
|
|
.reg_read = n3000_nios_reg_read,
|
|
};
|
|
|
|
static int n3000_nios_probe(struct dfl_device *ddev)
|
|
{
|
|
struct device *dev = &ddev->dev;
|
|
struct n3000_nios *nn;
|
|
int ret;
|
|
|
|
nn = devm_kzalloc(dev, sizeof(*nn), GFP_KERNEL);
|
|
if (!nn)
|
|
return -ENOMEM;
|
|
|
|
dev_set_drvdata(&ddev->dev, nn);
|
|
|
|
nn->dev = dev;
|
|
|
|
nn->base = devm_ioremap_resource(&ddev->dev, &ddev->mmio_res);
|
|
if (IS_ERR(nn->base))
|
|
return PTR_ERR(nn->base);
|
|
|
|
nn->regmap = devm_regmap_init(dev, NULL, nn, &n3000_nios_regbus_cfg);
|
|
if (IS_ERR(nn->regmap))
|
|
return PTR_ERR(nn->regmap);
|
|
|
|
ret = n3000_nios_init_done_check(nn);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = create_altera_spi_controller(nn);
|
|
if (ret)
|
|
dev_err(dev, "altera spi controller create failed: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void n3000_nios_remove(struct dfl_device *ddev)
|
|
{
|
|
struct n3000_nios *nn = dev_get_drvdata(&ddev->dev);
|
|
|
|
destroy_altera_spi_controller(nn);
|
|
}
|
|
|
|
#define FME_FEATURE_ID_N3000_NIOS 0xd
|
|
|
|
static const struct dfl_device_id n3000_nios_ids[] = {
|
|
{ FME_ID, FME_FEATURE_ID_N3000_NIOS },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(dfl, n3000_nios_ids);
|
|
|
|
static struct dfl_driver n3000_nios_driver = {
|
|
.drv = {
|
|
.name = "dfl-n3000-nios",
|
|
.dev_groups = n3000_nios_groups,
|
|
},
|
|
.id_table = n3000_nios_ids,
|
|
.probe = n3000_nios_probe,
|
|
.remove = n3000_nios_remove,
|
|
};
|
|
|
|
module_dfl_driver(n3000_nios_driver);
|
|
|
|
MODULE_DESCRIPTION("Driver for Nios private feature on Intel PAC N3000");
|
|
MODULE_AUTHOR("Intel Corporation");
|
|
MODULE_LICENSE("GPL v2");
|