mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![]() New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. -----BEGIN PGP SIGNATURE----- iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAmSF83ARHGppYzIzQGtl cm5lbC5vcmcACgkQVIU0mcT0Foi+NRAAi8E2NRkzxteTuiFRsAokm/8HbAc/9rDq 2Xyj8zT5B6jmqpbNKPtIbxxAxLV/JY+3HBIorvDNcOVfmOfshMpT31eaKpehxPJ3 A00WaJ6bi7CTp0h/7QOZnZ27yr3tuJ2jpCiGKWERmTZ60kn3S/5JRrXWbfKVccyU DR1SrsiVSbtDhD9w6kA7HBRsL0EmTQOP/ARlUcO4SB5BOC7rj9akaN6Q6LYSafOa BFfTd2suekRA94mB/ugm25xAWLsl4Rdr1iNkHyaGcXaMOJZ/zWXq14y1eLbqIJIc am8Wu2zvo+umNzuG5DMi3gxP2B57Zhcieh6sJ5egdbxB4kh5z3jrsAFiw/MLTEME 4Tc7uHBPFuXDdb8saxtmV2FVbC43+31FgCLivD0BGHtv0DndP7i//KCdp2aztmHo juyxRCw40xiul5Ihzh3NjukM0pb1inuhgblcEZVKOyaCjhur8NXoTEEcSqXczDVU BLHBmhQY2cKwqKWt1hbLXDs9iGlJBg0+P+P0VBsvy7WWOlvc9Hw8SryYwyBRJMYH LW/Wh85eIcyKaaGGEd+HQAyXwGSlrhycUSJzwdcc1IrK8TrIxn5k4BpQpeToQPjJ wBRRDigeciIN0K7L09N4hg+qTxtpLwFY945meAS0N60o5hZM4P40hnzL8m/Co0pH gx8SugY1NGk= =0gJ9 -----END PGP SIGNATURE----- Merge tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for the 6.5 cycle. New device support - honeywell,mprls0025pa * New driver and dt-bindings for this series of pressure sensors. - invensense,mpu6050 * Add support for ICM 20600 IMU (ID, bindings and device data). - melexis,mlx90614 * Add support for mlx90615 Infra Red Thermometer after driver cleanup and refactoring to support the differences in this device. - renesas,x9250 * New driver and bindings for this quad potentiometer. - rockchip,saradc * Add support for RK3588. Also included is a bunch of refactoring and cleanup for that driver. - rohm,bu27008 * New driver bindings etc for this 5 photodiode color sensor. - st,lsm9ds0/st,st-sensors * ID added for LSM303D accelerometer and magnetometer including ACPI binding. - ti,opt4001 * New driver and bindings for this ambient light sensor. Features - core * Introduce iio_validate_own_trigger() for cases where a driver can only consumer a trigger it registered (detected via same parent device). Use it in the kionix,kx022a driver and new rohm,by27008 driver. - dynaimage,al3320a * ACPI binding CALS0001 seen on Lenovo Yoga Table 2 devices. - kionix,kx002a * Enable asynchronous probe. - rohm,bu27034 * Enable asynchronous probe. - ti,tmp006 * Explicit support for DT including binding documentation. Cleanups, minor fixes and misc improvements. - treewide * Switch I2C drivers from probe_new() back to probe() - part of the long process of getting rid of a parameter from probe() * Various whitespace and typo fixes not otherwise called out. - core * industrialio-buffer,Style cleanup. * Add documentation to extend_name field of struct iio_chan_spec to direct people using it towards the label infrastructure instead. extend_name was a design mistake a long time back so directly people away from it may be useful. - adi,ad7606 * Add HAS_IOPORT dependency to prepare for some Kconfig changes. - bosch,bma400 * Drop pointless print of ret in a dev_err_probe() message. - invensense,icm42600 * Rework timestamp handling to reduce jitter. - mediatek,mt7986-auxdac * Add DT binding for this part. - qcom,spmi-vadc * Allow for 1/16th prescaling used on a few devices. * Various changes to channel labeling and naming, including dropping use of fwnode_name which generates odd channel names. Small ABI change as a result, but not thought to be a problem for users of this platform. - st,lsm6dsx * dt-binding: Use common schema for mount-matrix via a reference. - st,stm32 * Add a debug print for when legacy channel config is used. - ti,palmas-adc * Drop unused i2c.h include. * tag 'iio-for-6.5a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (59 commits) dt-bindings: iio: rockchip: Fix 'oneOf' condition failed warning dt-bindings: iio: afe: voltage-divider: Spelling s/curcuit/circuit/ dt-bindings: iio: adc: Add rockchip,rk3588-saradc string iio: adc: rockchip_saradc: Use dev_err_probe iio: adc: rockchip_saradc: Match alignment with open parenthesis iio: adc: rockchip_saradc: Use of_device_get_match_data iio: adc: rockchip_saradc: Make use of devm_clk_get_enabled iio: adc: rockchip_saradc: Add support for RK3588 iio: adc: rockchip_saradc: Add callback functions iio: temperature: tmp006: Add OF device matching support dt-bindings: iio: temperature: Add support for tmp006 staging: iio: Switch i2c drivers back to use .probe() iio: amplifiers: ad8366 Fix whitespace issue iio: imu: inv_icm42600: avoid frequent timestamp jitter MAINTAINERS: Add ROHM BU27008 iio: light: ROHM BU27008 color sensor iio: kx022a: Use new iio_validate_own_trigger() iio: trigger: Add simple trigger_validation helper dt-bindings: iio: light: ROHM BU27008 iio: mlx90614: Add MLX90615 support ... |
||
---|---|---|
.. | ||
ak8974.c | ||
ak8975.c | ||
bmc150_magn.c | ||
bmc150_magn.h | ||
bmc150_magn_i2c.c | ||
bmc150_magn_spi.c | ||
hid-sensor-magn-3d.c | ||
hmc5843.h | ||
hmc5843_core.c | ||
hmc5843_i2c.c | ||
hmc5843_spi.c | ||
Kconfig | ||
mag3110.c | ||
Makefile | ||
mmc35240.c | ||
rm3100-core.c | ||
rm3100-i2c.c | ||
rm3100-spi.c | ||
rm3100.h | ||
st_magn.h | ||
st_magn_buffer.c | ||
st_magn_core.c | ||
st_magn_i2c.c | ||
st_magn_spi.c | ||
tmag5273.c | ||
yamaha-yas530.c |