mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-26 19:00:25 +00:00
![Krzysztof Kozlowski](/assets/img/avatar_default.png)
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes the following compile error: drivers/pwm/pwm-stm32-lp.c:245:34: error: ‘stm32_pwm_lp_of_match’ defined but not used [-Werror=unused-const-variable=] for builds with CONFIG_OF=n, CONFIG_PWM_STM32_LP=y and W=1. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
263 lines
6.4 KiB
C
263 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* STM32 Low-Power Timer PWM driver
|
|
*
|
|
* Copyright (C) STMicroelectronics 2017
|
|
*
|
|
* Author: Gerald Baeza <gerald.baeza@st.com>
|
|
*
|
|
* Inspired by Gerald Baeza's pwm-stm32 driver
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/mfd/stm32-lptimer.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pwm.h>
|
|
|
|
struct stm32_pwm_lp {
|
|
struct pwm_chip chip;
|
|
struct clk *clk;
|
|
struct regmap *regmap;
|
|
};
|
|
|
|
static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
|
|
{
|
|
return container_of(chip, struct stm32_pwm_lp, chip);
|
|
}
|
|
|
|
/* STM32 Low-Power Timer is preceded by a configurable power-of-2 prescaler */
|
|
#define STM32_LPTIM_MAX_PRESCALER 128
|
|
|
|
static int stm32_pwm_lp_apply(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
const struct pwm_state *state)
|
|
{
|
|
struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
|
|
unsigned long long prd, div, dty;
|
|
struct pwm_state cstate;
|
|
u32 val, mask, cfgr, presc = 0;
|
|
bool reenable;
|
|
int ret;
|
|
|
|
pwm_get_state(pwm, &cstate);
|
|
reenable = !cstate.enabled;
|
|
|
|
if (!state->enabled) {
|
|
if (cstate.enabled) {
|
|
/* Disable LP timer */
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
|
|
if (ret)
|
|
return ret;
|
|
/* disable clock to PWM counter */
|
|
clk_disable(priv->clk);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Calculate the period and prescaler value */
|
|
div = (unsigned long long)clk_get_rate(priv->clk) * state->period;
|
|
do_div(div, NSEC_PER_SEC);
|
|
if (!div) {
|
|
/* Clock is too slow to achieve requested period. */
|
|
dev_dbg(priv->chip.dev, "Can't reach %llu ns\n", state->period);
|
|
return -EINVAL;
|
|
}
|
|
|
|
prd = div;
|
|
while (div > STM32_LPTIM_MAX_ARR) {
|
|
presc++;
|
|
if ((1 << presc) > STM32_LPTIM_MAX_PRESCALER) {
|
|
dev_err(priv->chip.dev, "max prescaler exceeded\n");
|
|
return -EINVAL;
|
|
}
|
|
div = prd >> presc;
|
|
}
|
|
prd = div;
|
|
|
|
/* Calculate the duty cycle */
|
|
dty = prd * state->duty_cycle;
|
|
do_div(dty, state->period);
|
|
|
|
if (!cstate.enabled) {
|
|
/* enable clock to drive PWM counter */
|
|
ret = clk_enable(priv->clk);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = regmap_read(priv->regmap, STM32_LPTIM_CFGR, &cfgr);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if ((FIELD_GET(STM32_LPTIM_PRESC, cfgr) != presc) ||
|
|
(FIELD_GET(STM32_LPTIM_WAVPOL, cfgr) != state->polarity)) {
|
|
val = FIELD_PREP(STM32_LPTIM_PRESC, presc);
|
|
val |= FIELD_PREP(STM32_LPTIM_WAVPOL, state->polarity);
|
|
mask = STM32_LPTIM_PRESC | STM32_LPTIM_WAVPOL;
|
|
|
|
/* Must disable LP timer to modify CFGR */
|
|
reenable = true;
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_update_bits(priv->regmap, STM32_LPTIM_CFGR, mask,
|
|
val);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
if (reenable) {
|
|
/* Must (re)enable LP timer to modify CMP & ARR */
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_CR,
|
|
STM32_LPTIM_ENABLE);
|
|
if (ret)
|
|
goto err;
|
|
}
|
|
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, prd - 1);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, prd - (1 + dty));
|
|
if (ret)
|
|
goto err;
|
|
|
|
/* ensure CMP & ARR registers are properly written */
|
|
ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
|
|
(val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
|
|
100, 1000);
|
|
if (ret) {
|
|
dev_err(priv->chip.dev, "ARR/CMP registers write issue\n");
|
|
goto err;
|
|
}
|
|
ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
|
|
STM32_LPTIM_CMPOKCF_ARROKCF);
|
|
if (ret)
|
|
goto err;
|
|
|
|
if (reenable) {
|
|
/* Start LP timer in continuous mode */
|
|
ret = regmap_set_bits(priv->regmap, STM32_LPTIM_CR,
|
|
STM32_LPTIM_CNTSTRT);
|
|
if (ret) {
|
|
regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
if (!cstate.enabled)
|
|
clk_disable(priv->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int stm32_pwm_lp_get_state(struct pwm_chip *chip,
|
|
struct pwm_device *pwm,
|
|
struct pwm_state *state)
|
|
{
|
|
struct stm32_pwm_lp *priv = to_stm32_pwm_lp(chip);
|
|
unsigned long rate = clk_get_rate(priv->clk);
|
|
u32 val, presc, prd;
|
|
u64 tmp;
|
|
|
|
regmap_read(priv->regmap, STM32_LPTIM_CR, &val);
|
|
state->enabled = !!FIELD_GET(STM32_LPTIM_ENABLE, val);
|
|
/* Keep PWM counter clock refcount in sync with PWM initial state */
|
|
if (state->enabled)
|
|
clk_enable(priv->clk);
|
|
|
|
regmap_read(priv->regmap, STM32_LPTIM_CFGR, &val);
|
|
presc = FIELD_GET(STM32_LPTIM_PRESC, val);
|
|
state->polarity = FIELD_GET(STM32_LPTIM_WAVPOL, val);
|
|
|
|
regmap_read(priv->regmap, STM32_LPTIM_ARR, &prd);
|
|
tmp = prd + 1;
|
|
tmp = (tmp << presc) * NSEC_PER_SEC;
|
|
state->period = DIV_ROUND_CLOSEST_ULL(tmp, rate);
|
|
|
|
regmap_read(priv->regmap, STM32_LPTIM_CMP, &val);
|
|
tmp = prd - val;
|
|
tmp = (tmp << presc) * NSEC_PER_SEC;
|
|
state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, rate);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct pwm_ops stm32_pwm_lp_ops = {
|
|
.owner = THIS_MODULE,
|
|
.apply = stm32_pwm_lp_apply,
|
|
.get_state = stm32_pwm_lp_get_state,
|
|
};
|
|
|
|
static int stm32_pwm_lp_probe(struct platform_device *pdev)
|
|
{
|
|
struct stm32_lptimer *ddata = dev_get_drvdata(pdev->dev.parent);
|
|
struct stm32_pwm_lp *priv;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->regmap = ddata->regmap;
|
|
priv->clk = ddata->clk;
|
|
priv->chip.dev = &pdev->dev;
|
|
priv->chip.ops = &stm32_pwm_lp_ops;
|
|
priv->chip.npwm = 1;
|
|
|
|
ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
|
|
{
|
|
struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
|
|
struct pwm_state state;
|
|
|
|
pwm_get_state(&priv->chip.pwms[0], &state);
|
|
if (state.enabled) {
|
|
dev_err(dev, "The consumer didn't stop us (%s)\n",
|
|
priv->chip.pwms[0].label);
|
|
return -EBUSY;
|
|
}
|
|
|
|
return pinctrl_pm_select_sleep_state(dev);
|
|
}
|
|
|
|
static int __maybe_unused stm32_pwm_lp_resume(struct device *dev)
|
|
{
|
|
return pinctrl_pm_select_default_state(dev);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
|
|
stm32_pwm_lp_resume);
|
|
|
|
static const struct of_device_id stm32_pwm_lp_of_match[] = {
|
|
{ .compatible = "st,stm32-pwm-lp", },
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);
|
|
|
|
static struct platform_driver stm32_pwm_lp_driver = {
|
|
.probe = stm32_pwm_lp_probe,
|
|
.driver = {
|
|
.name = "stm32-pwm-lp",
|
|
.of_match_table = stm32_pwm_lp_of_match,
|
|
.pm = &stm32_pwm_lp_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(stm32_pwm_lp_driver);
|
|
|
|
MODULE_ALIAS("platform:stm32-pwm-lp");
|
|
MODULE_DESCRIPTION("STMicroelectronics STM32 PWM LP driver");
|
|
MODULE_LICENSE("GPL v2");
|