mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 11:19:37 +00:00
![Ondrej Zary](/assets/img/avatar_default.png)
VT6420 seems to have the same hotplug capability as VT6421. However, enabling hotplug needs to expose SCR registers which can cause problems. It works for me but might break elsewhere. So add a module parameter vt6420_hotplug to enable this feature. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Tejun Heo <tj@kernel.org>
783 lines
21 KiB
C
783 lines
21 KiB
C
/*
|
|
* sata_via.c - VIA Serial ATA controllers
|
|
*
|
|
* Maintained by: Tejun Heo <tj@kernel.org>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc. All rights reserved.
|
|
* Copyright 2003-2004 Jeff Garzik
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/driver-api/libata.rst
|
|
*
|
|
* Hardware documentation available under NDA.
|
|
*
|
|
*
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "sata_via"
|
|
#define DRV_VERSION "2.6"
|
|
|
|
/*
|
|
* vt8251 is different from other sata controllers of VIA. It has two
|
|
* channels, each channel has both Master and Slave slot.
|
|
*/
|
|
enum board_ids_enum {
|
|
vt6420,
|
|
vt6421,
|
|
vt8251,
|
|
};
|
|
|
|
enum {
|
|
SATA_CHAN_ENAB = 0x40, /* SATA channel enable */
|
|
SATA_INT_GATE = 0x41, /* SATA interrupt gating */
|
|
SATA_NATIVE_MODE = 0x42, /* Native mode enable */
|
|
SVIA_MISC_3 = 0x46, /* Miscellaneous Control III */
|
|
PATA_UDMA_TIMING = 0xB3, /* PATA timing for DMA/ cable detect */
|
|
PATA_PIO_TIMING = 0xAB, /* PATA timing register */
|
|
|
|
PORT0 = (1 << 1),
|
|
PORT1 = (1 << 0),
|
|
ALL_PORTS = PORT0 | PORT1,
|
|
|
|
NATIVE_MODE_ALL = (1 << 7) | (1 << 6) | (1 << 5) | (1 << 4),
|
|
|
|
SATA_EXT_PHY = (1 << 6), /* 0==use PATA, 1==ext phy */
|
|
|
|
SATA_HOTPLUG = (1 << 5), /* enable IRQ on hotplug */
|
|
};
|
|
|
|
struct svia_priv {
|
|
bool wd_workaround;
|
|
};
|
|
|
|
static int vt6420_hotplug;
|
|
module_param_named(vt6420_hotplug, vt6420_hotplug, int, 0644);
|
|
MODULE_PARM_DESC(vt6420_hotplug, "Enable hot-plug support for VT6420 (0=Don't support, 1=support)");
|
|
|
|
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int svia_pci_device_resume(struct pci_dev *pdev);
|
|
#endif
|
|
static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
|
|
static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
|
|
static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val);
|
|
static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val);
|
|
static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
static void svia_noop_freeze(struct ata_port *ap);
|
|
static int vt6420_prereset(struct ata_link *link, unsigned long deadline);
|
|
static void vt6420_bmdma_start(struct ata_queued_cmd *qc);
|
|
static int vt6421_pata_cable_detect(struct ata_port *ap);
|
|
static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev);
|
|
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev);
|
|
static void vt6421_error_handler(struct ata_port *ap);
|
|
|
|
static const struct pci_device_id svia_pci_tbl[] = {
|
|
{ PCI_VDEVICE(VIA, 0x5337), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x0591), vt6420 }, /* 2 sata chnls (Master) */
|
|
{ PCI_VDEVICE(VIA, 0x3149), vt6420 }, /* 2 sata chnls (Master) */
|
|
{ PCI_VDEVICE(VIA, 0x3249), vt6421 }, /* 2 sata chnls, 1 pata chnl */
|
|
{ PCI_VDEVICE(VIA, 0x5372), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x7372), vt6420 },
|
|
{ PCI_VDEVICE(VIA, 0x5287), vt8251 }, /* 2 sata chnls (Master/Slave) */
|
|
{ PCI_VDEVICE(VIA, 0x9000), vt8251 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver svia_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = svia_pci_tbl,
|
|
.probe = svia_init_one,
|
|
#ifdef CONFIG_PM_SLEEP
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = svia_pci_device_resume,
|
|
#endif
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static struct scsi_host_template svia_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static struct ata_port_operations svia_base_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.sff_tf_load = svia_tf_load,
|
|
};
|
|
|
|
static struct ata_port_operations vt6420_sata_ops = {
|
|
.inherits = &svia_base_ops,
|
|
.freeze = svia_noop_freeze,
|
|
.prereset = vt6420_prereset,
|
|
.bmdma_start = vt6420_bmdma_start,
|
|
};
|
|
|
|
static struct ata_port_operations vt6421_pata_ops = {
|
|
.inherits = &svia_base_ops,
|
|
.cable_detect = vt6421_pata_cable_detect,
|
|
.set_piomode = vt6421_set_pio_mode,
|
|
.set_dmamode = vt6421_set_dma_mode,
|
|
};
|
|
|
|
static struct ata_port_operations vt6421_sata_ops = {
|
|
.inherits = &svia_base_ops,
|
|
.scr_read = svia_scr_read,
|
|
.scr_write = svia_scr_write,
|
|
.error_handler = vt6421_error_handler,
|
|
};
|
|
|
|
static struct ata_port_operations vt8251_ops = {
|
|
.inherits = &svia_base_ops,
|
|
.hardreset = sata_std_hardreset,
|
|
.scr_read = vt8251_scr_read,
|
|
.scr_write = vt8251_scr_write,
|
|
};
|
|
|
|
static const struct ata_port_info vt6420_port_info = {
|
|
.flags = ATA_FLAG_SATA,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &vt6420_sata_ops,
|
|
};
|
|
|
|
static const struct ata_port_info vt6421_sport_info = {
|
|
.flags = ATA_FLAG_SATA,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &vt6421_sata_ops,
|
|
};
|
|
|
|
static const struct ata_port_info vt6421_pport_info = {
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
/* No MWDMA */
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &vt6421_pata_ops,
|
|
};
|
|
|
|
static const struct ata_port_info vt8251_port_info = {
|
|
.flags = ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &vt8251_ops,
|
|
};
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for VIA SATA controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, svia_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
*val = ioread32(link->ap->ioaddr.scr_addr + (4 * sc_reg));
|
|
return 0;
|
|
}
|
|
|
|
static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
iowrite32(val, link->ap->ioaddr.scr_addr + (4 * sc_reg));
|
|
return 0;
|
|
}
|
|
|
|
static int vt8251_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
|
|
{
|
|
static const u8 ipm_tbl[] = { 1, 2, 6, 0 };
|
|
struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
|
|
int slot = 2 * link->ap->port_no + link->pmp;
|
|
u32 v = 0;
|
|
u8 raw;
|
|
|
|
switch (scr) {
|
|
case SCR_STATUS:
|
|
pci_read_config_byte(pdev, 0xA0 + slot, &raw);
|
|
|
|
/* read the DET field, bit0 and 1 of the config byte */
|
|
v |= raw & 0x03;
|
|
|
|
/* read the SPD field, bit4 of the configure byte */
|
|
if (raw & (1 << 4))
|
|
v |= 0x02 << 4;
|
|
else
|
|
v |= 0x01 << 4;
|
|
|
|
/* read the IPM field, bit2 and 3 of the config byte */
|
|
v |= ipm_tbl[(raw >> 2) & 0x3];
|
|
break;
|
|
|
|
case SCR_ERROR:
|
|
/* devices other than 5287 uses 0xA8 as base */
|
|
WARN_ON(pdev->device != 0x5287);
|
|
pci_read_config_dword(pdev, 0xB0 + slot * 4, &v);
|
|
break;
|
|
|
|
case SCR_CONTROL:
|
|
pci_read_config_byte(pdev, 0xA4 + slot, &raw);
|
|
|
|
/* read the DET field, bit0 and bit1 */
|
|
v |= ((raw & 0x02) << 1) | (raw & 0x01);
|
|
|
|
/* read the IPM field, bit2 and bit3 */
|
|
v |= ((raw >> 2) & 0x03) << 8;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
*val = v;
|
|
return 0;
|
|
}
|
|
|
|
static int vt8251_scr_write(struct ata_link *link, unsigned int scr, u32 val)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(link->ap->host->dev);
|
|
int slot = 2 * link->ap->port_no + link->pmp;
|
|
u32 v = 0;
|
|
|
|
switch (scr) {
|
|
case SCR_ERROR:
|
|
/* devices other than 5287 uses 0xA8 as base */
|
|
WARN_ON(pdev->device != 0x5287);
|
|
pci_write_config_dword(pdev, 0xB0 + slot * 4, val);
|
|
return 0;
|
|
|
|
case SCR_CONTROL:
|
|
/* set the DET field */
|
|
v |= ((val & 0x4) >> 1) | (val & 0x1);
|
|
|
|
/* set the IPM field */
|
|
v |= ((val >> 8) & 0x3) << 2;
|
|
|
|
pci_write_config_byte(pdev, 0xA4 + slot, v);
|
|
return 0;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* svia_tf_load - send taskfile registers to host controller
|
|
* @ap: Port to which output is sent
|
|
* @tf: ATA taskfile register set
|
|
*
|
|
* Outputs ATA taskfile to standard ATA host controller.
|
|
*
|
|
* This is to fix the internal bug of via chipsets, which will
|
|
* reset the device register after changing the IEN bit on ctl
|
|
* register.
|
|
*/
|
|
static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
struct ata_taskfile ttf;
|
|
|
|
if (tf->ctl != ap->last_ctl) {
|
|
ttf = *tf;
|
|
ttf.flags |= ATA_TFLAG_DEVICE;
|
|
tf = &ttf;
|
|
}
|
|
ata_sff_tf_load(ap, tf);
|
|
}
|
|
|
|
static void svia_noop_freeze(struct ata_port *ap)
|
|
{
|
|
/* Some VIA controllers choke if ATA_NIEN is manipulated in
|
|
* certain way. Leave it alone and just clear pending IRQ.
|
|
*/
|
|
ap->ops->sff_check_status(ap);
|
|
ata_bmdma_irq_clear(ap);
|
|
}
|
|
|
|
/**
|
|
* vt6420_prereset - prereset for vt6420
|
|
* @link: target ATA link
|
|
* @deadline: deadline jiffies for the operation
|
|
*
|
|
* SCR registers on vt6420 are pieces of shit and may hang the
|
|
* whole machine completely if accessed with the wrong timing.
|
|
* To avoid such catastrophe, vt6420 doesn't provide generic SCR
|
|
* access operations, but uses SStatus and SControl only during
|
|
* boot probing in controlled way.
|
|
*
|
|
* As the old (pre EH update) probing code is proven to work, we
|
|
* strictly follow the access pattern.
|
|
*
|
|
* LOCKING:
|
|
* Kernel thread context (may sleep)
|
|
*
|
|
* RETURNS:
|
|
* 0 on success, -errno otherwise.
|
|
*/
|
|
static int vt6420_prereset(struct ata_link *link, unsigned long deadline)
|
|
{
|
|
struct ata_port *ap = link->ap;
|
|
struct ata_eh_context *ehc = &ap->link.eh_context;
|
|
unsigned long timeout = jiffies + (HZ * 5);
|
|
u32 sstatus, scontrol;
|
|
int online;
|
|
|
|
/* don't do any SCR stuff if we're not loading */
|
|
if (!(ap->pflags & ATA_PFLAG_LOADING))
|
|
goto skip_scr;
|
|
|
|
/* Resume phy. This is the old SATA resume sequence */
|
|
svia_scr_write(link, SCR_CONTROL, 0x300);
|
|
svia_scr_read(link, SCR_CONTROL, &scontrol); /* flush */
|
|
|
|
/* wait for phy to become ready, if necessary */
|
|
do {
|
|
ata_msleep(link->ap, 200);
|
|
svia_scr_read(link, SCR_STATUS, &sstatus);
|
|
if ((sstatus & 0xf) != 1)
|
|
break;
|
|
} while (time_before(jiffies, timeout));
|
|
|
|
/* open code sata_print_link_status() */
|
|
svia_scr_read(link, SCR_STATUS, &sstatus);
|
|
svia_scr_read(link, SCR_CONTROL, &scontrol);
|
|
|
|
online = (sstatus & 0xf) == 0x3;
|
|
|
|
ata_port_info(ap,
|
|
"SATA link %s 1.5 Gbps (SStatus %X SControl %X)\n",
|
|
online ? "up" : "down", sstatus, scontrol);
|
|
|
|
/* SStatus is read one more time */
|
|
svia_scr_read(link, SCR_STATUS, &sstatus);
|
|
|
|
if (!online) {
|
|
/* tell EH to bail */
|
|
ehc->i.action &= ~ATA_EH_RESET;
|
|
return 0;
|
|
}
|
|
|
|
skip_scr:
|
|
/* wait for !BSY */
|
|
ata_sff_wait_ready(link, deadline);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void vt6420_bmdma_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
if ((qc->tf.command == ATA_CMD_PACKET) &&
|
|
(qc->scsicmd->sc_data_direction == DMA_TO_DEVICE)) {
|
|
/* Prevents corruption on some ATAPI burners */
|
|
ata_sff_pause(ap);
|
|
}
|
|
ata_bmdma_start(qc);
|
|
}
|
|
|
|
static int vt6421_pata_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 tmp;
|
|
|
|
pci_read_config_byte(pdev, PATA_UDMA_TIMING, &tmp);
|
|
if (tmp & 0x10)
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
static void vt6421_set_pio_mode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static const u8 pio_bits[] = { 0xA8, 0x65, 0x65, 0x31, 0x20 };
|
|
pci_write_config_byte(pdev, PATA_PIO_TIMING - adev->devno,
|
|
pio_bits[adev->pio_mode - XFER_PIO_0]);
|
|
}
|
|
|
|
static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 };
|
|
pci_write_config_byte(pdev, PATA_UDMA_TIMING - adev->devno,
|
|
udma_bits[adev->dma_mode - XFER_UDMA_0]);
|
|
}
|
|
|
|
static const unsigned int svia_bar_sizes[] = {
|
|
8, 4, 8, 4, 16, 256
|
|
};
|
|
|
|
static const unsigned int vt6421_bar_sizes[] = {
|
|
16, 16, 16, 16, 32, 128
|
|
};
|
|
|
|
static void __iomem *svia_scr_addr(void __iomem *addr, unsigned int port)
|
|
{
|
|
return addr + (port * 128);
|
|
}
|
|
|
|
static void __iomem *vt6421_scr_addr(void __iomem *addr, unsigned int port)
|
|
{
|
|
return addr + (port * 64);
|
|
}
|
|
|
|
static void vt6421_init_addrs(struct ata_port *ap)
|
|
{
|
|
void __iomem * const * iomap = ap->host->iomap;
|
|
void __iomem *reg_addr = iomap[ap->port_no];
|
|
void __iomem *bmdma_addr = iomap[4] + (ap->port_no * 8);
|
|
struct ata_ioports *ioaddr = &ap->ioaddr;
|
|
|
|
ioaddr->cmd_addr = reg_addr;
|
|
ioaddr->altstatus_addr =
|
|
ioaddr->ctl_addr = (void __iomem *)
|
|
((unsigned long)(reg_addr + 8) | ATA_PCI_CTL_OFS);
|
|
ioaddr->bmdma_addr = bmdma_addr;
|
|
ioaddr->scr_addr = vt6421_scr_addr(iomap[5], ap->port_no);
|
|
|
|
ata_sff_std_ports(ioaddr);
|
|
|
|
ata_port_pbar_desc(ap, ap->port_no, -1, "port");
|
|
ata_port_pbar_desc(ap, 4, ap->port_no * 8, "bmdma");
|
|
}
|
|
|
|
static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
|
|
{
|
|
const struct ata_port_info *ppi[] = { &vt6420_port_info, NULL };
|
|
struct ata_host *host;
|
|
int rc;
|
|
|
|
if (vt6420_hotplug) {
|
|
ppi[0]->port_ops->scr_read = svia_scr_read;
|
|
ppi[0]->port_ops->scr_write = svia_scr_write;
|
|
}
|
|
|
|
rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
|
|
if (rc)
|
|
return rc;
|
|
*r_host = host;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n");
|
|
return rc;
|
|
}
|
|
|
|
host->ports[0]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 0);
|
|
host->ports[1]->ioaddr.scr_addr = svia_scr_addr(host->iomap[5], 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vt6421_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
|
|
{
|
|
const struct ata_port_info *ppi[] =
|
|
{ &vt6421_sport_info, &vt6421_sport_info, &vt6421_pport_info };
|
|
struct ata_host *host;
|
|
int i, rc;
|
|
|
|
*r_host = host = ata_host_alloc_pinfo(&pdev->dev, ppi, ARRAY_SIZE(ppi));
|
|
if (!host) {
|
|
dev_err(&pdev->dev, "failed to allocate host\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rc = pcim_iomap_regions(pdev, 0x3f, DRV_NAME);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed to request/iomap PCI BARs (errno=%d)\n",
|
|
rc);
|
|
return rc;
|
|
}
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
for (i = 0; i < host->n_ports; i++)
|
|
vt6421_init_addrs(host->ports[i]);
|
|
|
|
rc = dma_set_mask(&pdev->dev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = dma_set_coherent_mask(&pdev->dev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
|
|
{
|
|
const struct ata_port_info *ppi[] = { &vt8251_port_info, NULL };
|
|
struct ata_host *host;
|
|
int i, rc;
|
|
|
|
rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
|
|
if (rc)
|
|
return rc;
|
|
*r_host = host;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << 5, DRV_NAME);
|
|
if (rc) {
|
|
dev_err(&pdev->dev, "failed to iomap PCI BAR 5\n");
|
|
return rc;
|
|
}
|
|
|
|
/* 8251 hosts four sata ports as M/S of the two channels */
|
|
for (i = 0; i < host->n_ports; i++)
|
|
ata_slave_link_init(host->ports[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void svia_wd_fix(struct pci_dev *pdev)
|
|
{
|
|
u8 tmp8;
|
|
|
|
pci_read_config_byte(pdev, 0x52, &tmp8);
|
|
pci_write_config_byte(pdev, 0x52, tmp8 | BIT(2));
|
|
}
|
|
|
|
static irqreturn_t vt642x_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
irqreturn_t rc = ata_bmdma_interrupt(irq, dev_instance);
|
|
|
|
/* if the IRQ was not handled, it might be a hotplug IRQ */
|
|
if (rc != IRQ_HANDLED) {
|
|
u32 serror;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
/* check for hotplug on port 0 */
|
|
svia_scr_read(&host->ports[0]->link, SCR_ERROR, &serror);
|
|
if (serror & SERR_PHYRDY_CHG) {
|
|
ata_ehi_hotplugged(&host->ports[0]->link.eh_info);
|
|
ata_port_freeze(host->ports[0]);
|
|
rc = IRQ_HANDLED;
|
|
}
|
|
/* check for hotplug on port 1 */
|
|
svia_scr_read(&host->ports[1]->link, SCR_ERROR, &serror);
|
|
if (serror & SERR_PHYRDY_CHG) {
|
|
ata_ehi_hotplugged(&host->ports[1]->link.eh_info);
|
|
ata_port_freeze(host->ports[1]);
|
|
rc = IRQ_HANDLED;
|
|
}
|
|
spin_unlock_irqrestore(&host->lock, flags);
|
|
}
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void vt6421_error_handler(struct ata_port *ap)
|
|
{
|
|
struct svia_priv *hpriv = ap->host->private_data;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u32 serror;
|
|
|
|
/* see svia_configure() for description */
|
|
if (!hpriv->wd_workaround) {
|
|
svia_scr_read(&ap->link, SCR_ERROR, &serror);
|
|
if (serror == 0x1000500) {
|
|
ata_port_warn(ap, "Incompatible drive: enabling workaround. This slows down transfer rate to ~60 MB/s");
|
|
svia_wd_fix(pdev);
|
|
hpriv->wd_workaround = true;
|
|
ap->link.eh_context.i.flags |= ATA_EHI_QUIET;
|
|
}
|
|
}
|
|
|
|
ata_sff_error_handler(ap);
|
|
}
|
|
|
|
static void svia_configure(struct pci_dev *pdev, int board_id,
|
|
struct svia_priv *hpriv)
|
|
{
|
|
u8 tmp8;
|
|
|
|
pci_read_config_byte(pdev, PCI_INTERRUPT_LINE, &tmp8);
|
|
dev_info(&pdev->dev, "routed to hard irq line %d\n",
|
|
(int) (tmp8 & 0xf0) == 0xf0 ? 0 : tmp8 & 0x0f);
|
|
|
|
/* make sure SATA channels are enabled */
|
|
pci_read_config_byte(pdev, SATA_CHAN_ENAB, &tmp8);
|
|
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
|
|
dev_dbg(&pdev->dev, "enabling SATA channels (0x%x)\n",
|
|
(int)tmp8);
|
|
tmp8 |= ALL_PORTS;
|
|
pci_write_config_byte(pdev, SATA_CHAN_ENAB, tmp8);
|
|
}
|
|
|
|
/* make sure interrupts for each channel sent to us */
|
|
pci_read_config_byte(pdev, SATA_INT_GATE, &tmp8);
|
|
if ((tmp8 & ALL_PORTS) != ALL_PORTS) {
|
|
dev_dbg(&pdev->dev, "enabling SATA channel interrupts (0x%x)\n",
|
|
(int) tmp8);
|
|
tmp8 |= ALL_PORTS;
|
|
pci_write_config_byte(pdev, SATA_INT_GATE, tmp8);
|
|
}
|
|
|
|
/* make sure native mode is enabled */
|
|
pci_read_config_byte(pdev, SATA_NATIVE_MODE, &tmp8);
|
|
if ((tmp8 & NATIVE_MODE_ALL) != NATIVE_MODE_ALL) {
|
|
dev_dbg(&pdev->dev,
|
|
"enabling SATA channel native mode (0x%x)\n",
|
|
(int) tmp8);
|
|
tmp8 |= NATIVE_MODE_ALL;
|
|
pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
|
|
}
|
|
|
|
if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421) {
|
|
/* enable IRQ on hotplug */
|
|
pci_read_config_byte(pdev, SVIA_MISC_3, &tmp8);
|
|
if ((tmp8 & SATA_HOTPLUG) != SATA_HOTPLUG) {
|
|
dev_dbg(&pdev->dev,
|
|
"enabling SATA hotplug (0x%x)\n",
|
|
(int) tmp8);
|
|
tmp8 |= SATA_HOTPLUG;
|
|
pci_write_config_byte(pdev, SVIA_MISC_3, tmp8);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* vt6420/1 has problems talking to some drives. The following
|
|
* is the fix from Joseph Chan <JosephChan@via.com.tw>.
|
|
*
|
|
* When host issues HOLD, device may send up to 20DW of data
|
|
* before acknowledging it with HOLDA and the host should be
|
|
* able to buffer them in FIFO. Unfortunately, some WD drives
|
|
* send up to 40DW before acknowledging HOLD and, in the
|
|
* default configuration, this ends up overflowing vt6421's
|
|
* FIFO, making the controller abort the transaction with
|
|
* R_ERR.
|
|
*
|
|
* Rx52[2] is the internal 128DW FIFO Flow control watermark
|
|
* adjusting mechanism enable bit and the default value 0
|
|
* means host will issue HOLD to device when the left FIFO
|
|
* size goes below 32DW. Setting it to 1 makes the watermark
|
|
* 64DW.
|
|
*
|
|
* https://bugzilla.kernel.org/show_bug.cgi?id=15173
|
|
* http://article.gmane.org/gmane.linux.ide/46352
|
|
* http://thread.gmane.org/gmane.linux.kernel/1062139
|
|
*
|
|
* As the fix slows down data transfer, apply it only if the error
|
|
* actually appears - see vt6421_error_handler()
|
|
* Apply the fix always on vt6420 as we don't know if SCR_ERROR can be
|
|
* read safely.
|
|
*/
|
|
if (board_id == vt6420) {
|
|
svia_wd_fix(pdev);
|
|
hpriv->wd_workaround = true;
|
|
}
|
|
}
|
|
|
|
static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
unsigned int i;
|
|
int rc;
|
|
struct ata_host *host = NULL;
|
|
int board_id = (int) ent->driver_data;
|
|
const unsigned *bar_sizes;
|
|
struct svia_priv *hpriv;
|
|
|
|
ata_print_version_once(&pdev->dev, DRV_VERSION);
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (board_id == vt6421)
|
|
bar_sizes = &vt6421_bar_sizes[0];
|
|
else
|
|
bar_sizes = &svia_bar_sizes[0];
|
|
|
|
for (i = 0; i < ARRAY_SIZE(svia_bar_sizes); i++)
|
|
if ((pci_resource_start(pdev, i) == 0) ||
|
|
(pci_resource_len(pdev, i) < bar_sizes[i])) {
|
|
dev_err(&pdev->dev,
|
|
"invalid PCI BAR %u (sz 0x%llx, val 0x%llx)\n",
|
|
i,
|
|
(unsigned long long)pci_resource_start(pdev, i),
|
|
(unsigned long long)pci_resource_len(pdev, i));
|
|
return -ENODEV;
|
|
}
|
|
|
|
switch (board_id) {
|
|
case vt6420:
|
|
rc = vt6420_prepare_host(pdev, &host);
|
|
break;
|
|
case vt6421:
|
|
rc = vt6421_prepare_host(pdev, &host);
|
|
break;
|
|
case vt8251:
|
|
rc = vt8251_prepare_host(pdev, &host);
|
|
break;
|
|
default:
|
|
rc = -EINVAL;
|
|
}
|
|
if (rc)
|
|
return rc;
|
|
|
|
hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);
|
|
if (!hpriv)
|
|
return -ENOMEM;
|
|
host->private_data = hpriv;
|
|
|
|
svia_configure(pdev, board_id, hpriv);
|
|
|
|
pci_set_master(pdev);
|
|
if ((board_id == vt6420 && vt6420_hotplug) || board_id == vt6421)
|
|
return ata_host_activate(host, pdev->irq, vt642x_interrupt,
|
|
IRQF_SHARED, &svia_sht);
|
|
else
|
|
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
|
|
IRQF_SHARED, &svia_sht);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int svia_pci_device_resume(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = pci_get_drvdata(pdev);
|
|
struct svia_priv *hpriv = host->private_data;
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (hpriv->wd_workaround)
|
|
svia_wd_fix(pdev);
|
|
ata_host_resume(host);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
module_pci_driver(svia_pci_driver);
|