mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
![Julia Lawall](/assets/img/avatar_default.png)
Use DEVICE_ATTR_RO for read only attributes and DEVICE_ATTR_RW for read/write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. The conversion was done automatically using coccinelle. It was validated by compiling both the old and the new source code and comparing its text, data, and bss size. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> [groeck: Updated description] Signed-off-by: Guenter Roeck <linux@roeck-us.net>
582 lines
17 KiB
C
582 lines
17 KiB
C
/*
|
|
* adm1025.c
|
|
*
|
|
* Copyright (C) 2000 Chen-Yuan Wu <gwu@esoft.com>
|
|
* Copyright (C) 2003-2009 Jean Delvare <jdelvare@suse.de>
|
|
*
|
|
* The ADM1025 is a sensor chip made by Analog Devices. It reports up to 6
|
|
* voltages (including its own power source) and up to two temperatures
|
|
* (its own plus up to one external one). Voltages are scaled internally
|
|
* (which is not the common way) with ratios such that the nominal value
|
|
* of each voltage correspond to a register value of 192 (which means a
|
|
* resolution of about 0.5% of the nominal value). Temperature values are
|
|
* reported with a 1 deg resolution and a 3 deg accuracy. Complete
|
|
* datasheet can be obtained from Analog's website at:
|
|
* http://www.onsemi.com/PowerSolutions/product.do?id=ADM1025
|
|
*
|
|
* This driver also supports the ADM1025A, which differs from the ADM1025
|
|
* only in that it has "open-drain VID inputs while the ADM1025 has
|
|
* on-chip 100k pull-ups on the VID inputs". It doesn't make any
|
|
* difference for us.
|
|
*
|
|
* This driver also supports the NE1619, a sensor chip made by Philips.
|
|
* That chip is similar to the ADM1025A, with a few differences. The only
|
|
* difference that matters to us is that the NE1619 has only two possible
|
|
* addresses while the ADM1025A has a third one. Complete datasheet can be
|
|
* obtained from Philips's website at:
|
|
* http://www.semiconductors.philips.com/pip/NE1619DS.html
|
|
*
|
|
* Since the ADM1025 was the first chipset supported by this driver, most
|
|
* comments will refer to this chipset, but are actually general and
|
|
* concern all supported chipsets, unless mentioned otherwise.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/hwmon-vid.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
|
|
/*
|
|
* Addresses to scan
|
|
* ADM1025 and ADM1025A have three possible addresses: 0x2c, 0x2d and 0x2e.
|
|
* NE1619 has two possible addresses: 0x2c and 0x2d.
|
|
*/
|
|
|
|
static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
|
|
|
|
enum chips { adm1025, ne1619 };
|
|
|
|
/*
|
|
* The ADM1025 registers
|
|
*/
|
|
|
|
#define ADM1025_REG_MAN_ID 0x3E
|
|
#define ADM1025_REG_CHIP_ID 0x3F
|
|
#define ADM1025_REG_CONFIG 0x40
|
|
#define ADM1025_REG_STATUS1 0x41
|
|
#define ADM1025_REG_STATUS2 0x42
|
|
#define ADM1025_REG_IN(nr) (0x20 + (nr))
|
|
#define ADM1025_REG_IN_MAX(nr) (0x2B + (nr) * 2)
|
|
#define ADM1025_REG_IN_MIN(nr) (0x2C + (nr) * 2)
|
|
#define ADM1025_REG_TEMP(nr) (0x26 + (nr))
|
|
#define ADM1025_REG_TEMP_HIGH(nr) (0x37 + (nr) * 2)
|
|
#define ADM1025_REG_TEMP_LOW(nr) (0x38 + (nr) * 2)
|
|
#define ADM1025_REG_VID 0x47
|
|
#define ADM1025_REG_VID4 0x49
|
|
|
|
/*
|
|
* Conversions and various macros
|
|
* The ADM1025 uses signed 8-bit values for temperatures.
|
|
*/
|
|
|
|
static const int in_scale[6] = { 2500, 2250, 3300, 5000, 12000, 3300 };
|
|
|
|
#define IN_FROM_REG(reg, scale) (((reg) * (scale) + 96) / 192)
|
|
#define IN_TO_REG(val, scale) ((val) <= 0 ? 0 : \
|
|
(val) >= (scale) * 255 / 192 ? 255 : \
|
|
((val) * 192 + (scale) / 2) / (scale))
|
|
|
|
#define TEMP_FROM_REG(reg) ((reg) * 1000)
|
|
#define TEMP_TO_REG(val) ((val) <= -127500 ? -128 : \
|
|
(val) >= 126500 ? 127 : \
|
|
(((val) < 0 ? (val) - 500 : \
|
|
(val) + 500) / 1000))
|
|
|
|
/*
|
|
* Client data (each client gets its own)
|
|
*/
|
|
|
|
struct adm1025_data {
|
|
struct i2c_client *client;
|
|
const struct attribute_group *groups[3];
|
|
struct mutex update_lock;
|
|
char valid; /* zero until following fields are valid */
|
|
unsigned long last_updated; /* in jiffies */
|
|
|
|
u8 in[6]; /* register value */
|
|
u8 in_max[6]; /* register value */
|
|
u8 in_min[6]; /* register value */
|
|
s8 temp[2]; /* register value */
|
|
s8 temp_min[2]; /* register value */
|
|
s8 temp_max[2]; /* register value */
|
|
u16 alarms; /* register values, combined */
|
|
u8 vid; /* register values, combined */
|
|
u8 vrm;
|
|
};
|
|
|
|
static struct adm1025_data *adm1025_update_device(struct device *dev)
|
|
{
|
|
struct adm1025_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
|
|
int i;
|
|
|
|
dev_dbg(&client->dev, "Updating data.\n");
|
|
for (i = 0; i < 6; i++) {
|
|
data->in[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN(i));
|
|
data->in_min[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN_MIN(i));
|
|
data->in_max[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN_MAX(i));
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
data->temp[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP(i));
|
|
data->temp_min[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP_LOW(i));
|
|
data->temp_max[i] = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP_HIGH(i));
|
|
}
|
|
data->alarms = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_STATUS1)
|
|
| (i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_STATUS2) << 8);
|
|
data->vid = (i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_VID) & 0x0f)
|
|
| ((i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_VID4) & 0x01) << 4);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/*
|
|
* Sysfs stuff
|
|
*/
|
|
|
|
static ssize_t
|
|
show_in(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in[index],
|
|
in_scale[index]));
|
|
}
|
|
|
|
static ssize_t
|
|
show_in_min(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_min[index],
|
|
in_scale[index]));
|
|
}
|
|
|
|
static ssize_t
|
|
show_in_max(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", IN_FROM_REG(data->in_max[index],
|
|
in_scale[index]));
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[index]));
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp_min(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[index]));
|
|
}
|
|
|
|
static ssize_t
|
|
show_temp_max(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[index]));
|
|
}
|
|
|
|
static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_min[index] = IN_TO_REG(val, in_scale[index]);
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MIN(index),
|
|
data->in_min[index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_max[index] = IN_TO_REG(val, in_scale[index]);
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_IN_MAX(index),
|
|
data->in_max[index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
#define set_in(offset) \
|
|
static SENSOR_DEVICE_ATTR(in##offset##_input, S_IRUGO, \
|
|
show_in, NULL, offset); \
|
|
static SENSOR_DEVICE_ATTR(in##offset##_min, S_IWUSR | S_IRUGO, \
|
|
show_in_min, set_in_min, offset); \
|
|
static SENSOR_DEVICE_ATTR(in##offset##_max, S_IWUSR | S_IRUGO, \
|
|
show_in_max, set_in_max, offset)
|
|
set_in(0);
|
|
set_in(1);
|
|
set_in(2);
|
|
set_in(3);
|
|
set_in(4);
|
|
set_in(5);
|
|
|
|
static ssize_t set_temp_min(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_min[index] = TEMP_TO_REG(val);
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_LOW(index),
|
|
data->temp_min[index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
int index = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = dev_get_drvdata(dev);
|
|
struct i2c_client *client = data->client;
|
|
long val;
|
|
int err;
|
|
|
|
err = kstrtol(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_max[index] = TEMP_TO_REG(val);
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_TEMP_HIGH(index),
|
|
data->temp_max[index]);
|
|
mutex_unlock(&data->update_lock);
|
|
return count;
|
|
}
|
|
|
|
#define set_temp(offset) \
|
|
static SENSOR_DEVICE_ATTR(temp##offset##_input, S_IRUGO, \
|
|
show_temp, NULL, offset - 1); \
|
|
static SENSOR_DEVICE_ATTR(temp##offset##_min, S_IWUSR | S_IRUGO, \
|
|
show_temp_min, set_temp_min, offset - 1); \
|
|
static SENSOR_DEVICE_ATTR(temp##offset##_max, S_IWUSR | S_IRUGO, \
|
|
show_temp_max, set_temp_max, offset - 1)
|
|
set_temp(1);
|
|
set_temp(2);
|
|
|
|
static ssize_t
|
|
alarms_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", data->alarms);
|
|
}
|
|
static DEVICE_ATTR_RO(alarms);
|
|
|
|
static ssize_t
|
|
show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
int bitnr = to_sensor_dev_attr(attr)->index;
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", (data->alarms >> bitnr) & 1);
|
|
}
|
|
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 8);
|
|
static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 9);
|
|
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 5);
|
|
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 4);
|
|
static SENSOR_DEVICE_ATTR(temp1_fault, S_IRUGO, show_alarm, NULL, 14);
|
|
|
|
static ssize_t
|
|
cpu0_vid_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct adm1025_data *data = adm1025_update_device(dev);
|
|
return sprintf(buf, "%u\n", vid_from_reg(data->vid, data->vrm));
|
|
}
|
|
static DEVICE_ATTR_RO(cpu0_vid);
|
|
|
|
static ssize_t
|
|
vrm_show(struct device *dev, struct device_attribute *attr, char *buf)
|
|
{
|
|
struct adm1025_data *data = dev_get_drvdata(dev);
|
|
return sprintf(buf, "%u\n", data->vrm);
|
|
}
|
|
static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct adm1025_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int err;
|
|
|
|
err = kstrtoul(buf, 10, &val);
|
|
if (err)
|
|
return err;
|
|
|
|
if (val > 255)
|
|
return -EINVAL;
|
|
|
|
data->vrm = val;
|
|
return count;
|
|
}
|
|
static DEVICE_ATTR_RW(vrm);
|
|
|
|
/*
|
|
* Real code
|
|
*/
|
|
|
|
static struct attribute *adm1025_attributes[] = {
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
&sensor_dev_attr_in0_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min.dev_attr.attr,
|
|
&sensor_dev_attr_in3_min.dev_attr.attr,
|
|
&sensor_dev_attr_in5_min.dev_attr.attr,
|
|
&sensor_dev_attr_in0_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max.dev_attr.attr,
|
|
&sensor_dev_attr_in3_max.dev_attr.attr,
|
|
&sensor_dev_attr_in5_max.dev_attr.attr,
|
|
&sensor_dev_attr_in0_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in5_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_min.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_fault.dev_attr.attr,
|
|
&dev_attr_alarms.attr,
|
|
&dev_attr_cpu0_vid.attr,
|
|
&dev_attr_vrm.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group adm1025_group = {
|
|
.attrs = adm1025_attributes,
|
|
};
|
|
|
|
static struct attribute *adm1025_attributes_in4[] = {
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_min.dev_attr.attr,
|
|
&sensor_dev_attr_in4_max.dev_attr.attr,
|
|
&sensor_dev_attr_in4_alarm.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group adm1025_group_in4 = {
|
|
.attrs = adm1025_attributes_in4,
|
|
};
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int adm1025_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
const char *name;
|
|
u8 man_id, chip_id;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
|
|
return -ENODEV;
|
|
|
|
/* Check for unused bits */
|
|
if ((i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG) & 0x80)
|
|
|| (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS1) & 0xC0)
|
|
|| (i2c_smbus_read_byte_data(client, ADM1025_REG_STATUS2) & 0xBC)) {
|
|
dev_dbg(&adapter->dev, "ADM1025 detection failed at 0x%02x\n",
|
|
client->addr);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Identification */
|
|
chip_id = i2c_smbus_read_byte_data(client, ADM1025_REG_CHIP_ID);
|
|
if ((chip_id & 0xF0) != 0x20)
|
|
return -ENODEV;
|
|
|
|
man_id = i2c_smbus_read_byte_data(client, ADM1025_REG_MAN_ID);
|
|
if (man_id == 0x41)
|
|
name = "adm1025";
|
|
else if (man_id == 0xA1 && client->addr != 0x2E)
|
|
name = "ne1619";
|
|
else
|
|
return -ENODEV;
|
|
|
|
strlcpy(info->type, name, I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void adm1025_init_client(struct i2c_client *client)
|
|
{
|
|
u8 reg;
|
|
struct adm1025_data *data = i2c_get_clientdata(client);
|
|
int i;
|
|
|
|
data->vrm = vid_which_vrm();
|
|
|
|
/*
|
|
* Set high limits
|
|
* Usually we avoid setting limits on driver init, but it happens
|
|
* that the ADM1025 comes with stupid default limits (all registers
|
|
* set to 0). In case the chip has not gone through any limit
|
|
* setting yet, we better set the high limits to the max so that
|
|
* no alarm triggers.
|
|
*/
|
|
for (i = 0; i < 6; i++) {
|
|
reg = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_IN_MAX(i));
|
|
if (reg == 0)
|
|
i2c_smbus_write_byte_data(client,
|
|
ADM1025_REG_IN_MAX(i),
|
|
0xFF);
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
reg = i2c_smbus_read_byte_data(client,
|
|
ADM1025_REG_TEMP_HIGH(i));
|
|
if (reg == 0)
|
|
i2c_smbus_write_byte_data(client,
|
|
ADM1025_REG_TEMP_HIGH(i),
|
|
0x7F);
|
|
}
|
|
|
|
/*
|
|
* Start the conversions
|
|
*/
|
|
reg = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
|
|
if (!(reg & 0x01))
|
|
i2c_smbus_write_byte_data(client, ADM1025_REG_CONFIG,
|
|
(reg&0x7E)|0x01);
|
|
}
|
|
|
|
static int adm1025_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct adm1025_data *data;
|
|
u8 config;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct adm1025_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
i2c_set_clientdata(client, data);
|
|
data->client = client;
|
|
mutex_init(&data->update_lock);
|
|
|
|
/* Initialize the ADM1025 chip */
|
|
adm1025_init_client(client);
|
|
|
|
/* sysfs hooks */
|
|
data->groups[0] = &adm1025_group;
|
|
/* Pin 11 is either in4 (+12V) or VID4 */
|
|
config = i2c_smbus_read_byte_data(client, ADM1025_REG_CONFIG);
|
|
if (!(config & 0x20))
|
|
data->groups[1] = &adm1025_group_in4;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
|
|
data, data->groups);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id adm1025_id[] = {
|
|
{ "adm1025", adm1025 },
|
|
{ "ne1619", ne1619 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, adm1025_id);
|
|
|
|
static struct i2c_driver adm1025_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "adm1025",
|
|
},
|
|
.probe = adm1025_probe,
|
|
.id_table = adm1025_id,
|
|
.detect = adm1025_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(adm1025_driver);
|
|
|
|
MODULE_AUTHOR("Jean Delvare <jdelvare@suse.de>");
|
|
MODULE_DESCRIPTION("ADM1025 driver");
|
|
MODULE_LICENSE("GPL");
|