mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-27 19:29:37 +00:00
![Marek Szyprowski](/assets/img/avatar_default.png)
Initialize data->config_lock mutex before it is used by the driver code.
This fixes following warning on Odroid XU3 boards:
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc7-next-20180115-00001-gb75575dee3f2 #107
Hardware name: SAMSUNG EXYNOS (Flattened Device Tree)
[<c0111504>] (unwind_backtrace) from [<c010dbec>] (show_stack+0x10/0x14)
[<c010dbec>] (show_stack) from [<c09b3f74>] (dump_stack+0x90/0xc8)
[<c09b3f74>] (dump_stack) from [<c0179528>] (register_lock_class+0x1c0/0x59c)
[<c0179528>] (register_lock_class) from [<c017bd1c>] (__lock_acquire+0x78/0x1850)
[<c017bd1c>] (__lock_acquire) from [<c017de30>] (lock_acquire+0xc8/0x2b8)
[<c017de30>] (lock_acquire) from [<c09ca59c>] (__mutex_lock+0x60/0xa0c)
[<c09ca59c>] (__mutex_lock) from [<c09cafd0>] (mutex_lock_nested+0x1c/0x24)
[<c09cafd0>] (mutex_lock_nested) from [<c068b0d0>] (ina2xx_set_shunt+0x70/0xb0)
[<c068b0d0>] (ina2xx_set_shunt) from [<c068b218>] (ina2xx_probe+0x88/0x1b0)
[<c068b218>] (ina2xx_probe) from [<c0673d90>] (i2c_device_probe+0x1e0/0x2d0)
[<c0673d90>] (i2c_device_probe) from [<c053a268>] (driver_probe_device+0x2b8/0x4a0)
[<c053a268>] (driver_probe_device) from [<c053a54c>] (__driver_attach+0xfc/0x120)
[<c053a54c>] (__driver_attach) from [<c05384cc>] (bus_for_each_dev+0x58/0x7c)
[<c05384cc>] (bus_for_each_dev) from [<c0539590>] (bus_add_driver+0x174/0x250)
[<c0539590>] (bus_add_driver) from [<c053b5e0>] (driver_register+0x78/0xf4)
[<c053b5e0>] (driver_register) from [<c0675ef0>] (i2c_register_driver+0x38/0xa8)
[<c0675ef0>] (i2c_register_driver) from [<c0102b40>] (do_one_initcall+0x48/0x18c)
[<c0102b40>] (do_one_initcall) from [<c0e00df0>] (kernel_init_freeable+0x110/0x1d4)
[<c0e00df0>] (kernel_init_freeable) from [<c09c8120>] (kernel_init+0x8/0x114)
[<c09c8120>] (kernel_init) from [<c01010b4>] (ret_from_fork+0x14/0x20)
Fixes: 5d389b1251
("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
547 lines
13 KiB
C
547 lines
13 KiB
C
/*
|
|
* Driver for Texas Instruments INA219, INA226 power monitor chips
|
|
*
|
|
* INA219:
|
|
* Zero Drift Bi-Directional Current/Power Monitor with I2C Interface
|
|
* Datasheet: http://www.ti.com/product/ina219
|
|
*
|
|
* INA220:
|
|
* Bi-Directional Current/Power Monitor with I2C Interface
|
|
* Datasheet: http://www.ti.com/product/ina220
|
|
*
|
|
* INA226:
|
|
* Bi-Directional Current/Power Monitor with I2C Interface
|
|
* Datasheet: http://www.ti.com/product/ina226
|
|
*
|
|
* INA230:
|
|
* Bi-directional Current/Power Monitor with I2C Interface
|
|
* Datasheet: http://www.ti.com/product/ina230
|
|
*
|
|
* Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
|
|
* Thanks to Jan Volkering
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; version 2 of the License.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/err.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/util_macros.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include <linux/platform_data/ina2xx.h>
|
|
|
|
/* common register definitions */
|
|
#define INA2XX_CONFIG 0x00
|
|
#define INA2XX_SHUNT_VOLTAGE 0x01 /* readonly */
|
|
#define INA2XX_BUS_VOLTAGE 0x02 /* readonly */
|
|
#define INA2XX_POWER 0x03 /* readonly */
|
|
#define INA2XX_CURRENT 0x04 /* readonly */
|
|
#define INA2XX_CALIBRATION 0x05
|
|
|
|
/* INA226 register definitions */
|
|
#define INA226_MASK_ENABLE 0x06
|
|
#define INA226_ALERT_LIMIT 0x07
|
|
#define INA226_DIE_ID 0xFF
|
|
|
|
/* register count */
|
|
#define INA219_REGISTERS 6
|
|
#define INA226_REGISTERS 8
|
|
|
|
#define INA2XX_MAX_REGISTERS 8
|
|
|
|
/* settings - depend on use case */
|
|
#define INA219_CONFIG_DEFAULT 0x399F /* PGA=8 */
|
|
#define INA226_CONFIG_DEFAULT 0x4527 /* averages=16 */
|
|
|
|
/* worst case is 68.10 ms (~14.6Hz, ina219) */
|
|
#define INA2XX_CONVERSION_RATE 15
|
|
#define INA2XX_MAX_DELAY 69 /* worst case delay in ms */
|
|
|
|
#define INA2XX_RSHUNT_DEFAULT 10000
|
|
|
|
/* bit mask for reading the averaging setting in the configuration register */
|
|
#define INA226_AVG_RD_MASK 0x0E00
|
|
|
|
#define INA226_READ_AVG(reg) (((reg) & INA226_AVG_RD_MASK) >> 9)
|
|
#define INA226_SHIFT_AVG(val) ((val) << 9)
|
|
|
|
/* common attrs, ina226 attrs and NULL */
|
|
#define INA2XX_MAX_ATTRIBUTE_GROUPS 3
|
|
|
|
/*
|
|
* Both bus voltage and shunt voltage conversion times for ina226 are set
|
|
* to 0b0100 on POR, which translates to 2200 microseconds in total.
|
|
*/
|
|
#define INA226_TOTAL_CONV_TIME_DEFAULT 2200
|
|
|
|
static struct regmap_config ina2xx_regmap_config = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
};
|
|
|
|
enum ina2xx_ids { ina219, ina226 };
|
|
|
|
struct ina2xx_config {
|
|
u16 config_default;
|
|
int calibration_value;
|
|
int registers;
|
|
int shunt_div;
|
|
int bus_voltage_shift;
|
|
int bus_voltage_lsb; /* uV */
|
|
int power_lsb_factor;
|
|
};
|
|
|
|
struct ina2xx_data {
|
|
const struct ina2xx_config *config;
|
|
|
|
long rshunt;
|
|
long current_lsb_uA;
|
|
long power_lsb_uW;
|
|
struct mutex config_lock;
|
|
struct regmap *regmap;
|
|
|
|
const struct attribute_group *groups[INA2XX_MAX_ATTRIBUTE_GROUPS];
|
|
};
|
|
|
|
static const struct ina2xx_config ina2xx_config[] = {
|
|
[ina219] = {
|
|
.config_default = INA219_CONFIG_DEFAULT,
|
|
.calibration_value = 4096,
|
|
.registers = INA219_REGISTERS,
|
|
.shunt_div = 100,
|
|
.bus_voltage_shift = 3,
|
|
.bus_voltage_lsb = 4000,
|
|
.power_lsb_factor = 20,
|
|
},
|
|
[ina226] = {
|
|
.config_default = INA226_CONFIG_DEFAULT,
|
|
.calibration_value = 2048,
|
|
.registers = INA226_REGISTERS,
|
|
.shunt_div = 400,
|
|
.bus_voltage_shift = 0,
|
|
.bus_voltage_lsb = 1250,
|
|
.power_lsb_factor = 25,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* Available averaging rates for ina226. The indices correspond with
|
|
* the bit values expected by the chip (according to the ina226 datasheet,
|
|
* table 3 AVG bit settings, found at
|
|
* http://www.ti.com/lit/ds/symlink/ina226.pdf.
|
|
*/
|
|
static const int ina226_avg_tab[] = { 1, 4, 16, 64, 128, 256, 512, 1024 };
|
|
|
|
static int ina226_reg_to_interval(u16 config)
|
|
{
|
|
int avg = ina226_avg_tab[INA226_READ_AVG(config)];
|
|
|
|
/*
|
|
* Multiply the total conversion time by the number of averages.
|
|
* Return the result in milliseconds.
|
|
*/
|
|
return DIV_ROUND_CLOSEST(avg * INA226_TOTAL_CONV_TIME_DEFAULT, 1000);
|
|
}
|
|
|
|
/*
|
|
* Return the new, shifted AVG field value of CONFIG register,
|
|
* to use with regmap_update_bits
|
|
*/
|
|
static u16 ina226_interval_to_reg(int interval)
|
|
{
|
|
int avg, avg_bits;
|
|
|
|
avg = DIV_ROUND_CLOSEST(interval * 1000,
|
|
INA226_TOTAL_CONV_TIME_DEFAULT);
|
|
avg_bits = find_closest(avg, ina226_avg_tab,
|
|
ARRAY_SIZE(ina226_avg_tab));
|
|
|
|
return INA226_SHIFT_AVG(avg_bits);
|
|
}
|
|
|
|
/*
|
|
* Calibration register is set to the best value, which eliminates
|
|
* truncation errors on calculating current register in hardware.
|
|
* According to datasheet (eq. 3) the best values are 2048 for
|
|
* ina226 and 4096 for ina219. They are hardcoded as calibration_value.
|
|
*/
|
|
static int ina2xx_calibrate(struct ina2xx_data *data)
|
|
{
|
|
return regmap_write(data->regmap, INA2XX_CALIBRATION,
|
|
data->config->calibration_value);
|
|
}
|
|
|
|
/*
|
|
* Initialize the configuration and calibration registers.
|
|
*/
|
|
static int ina2xx_init(struct ina2xx_data *data)
|
|
{
|
|
int ret = regmap_write(data->regmap, INA2XX_CONFIG,
|
|
data->config->config_default);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return ina2xx_calibrate(data);
|
|
}
|
|
|
|
static int ina2xx_read_reg(struct device *dev, int reg, unsigned int *regval)
|
|
{
|
|
struct ina2xx_data *data = dev_get_drvdata(dev);
|
|
int ret, retry;
|
|
|
|
dev_dbg(dev, "Starting register %d read\n", reg);
|
|
|
|
for (retry = 5; retry; retry--) {
|
|
|
|
ret = regmap_read(data->regmap, reg, regval);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dev_dbg(dev, "read %d, val = 0x%04x\n", reg, *regval);
|
|
|
|
/*
|
|
* If the current value in the calibration register is 0, the
|
|
* power and current registers will also remain at 0. In case
|
|
* the chip has been reset let's check the calibration
|
|
* register and reinitialize if needed.
|
|
* We do that extra read of the calibration register if there
|
|
* is some hint of a chip reset.
|
|
*/
|
|
if (*regval == 0) {
|
|
unsigned int cal;
|
|
|
|
ret = regmap_read(data->regmap, INA2XX_CALIBRATION,
|
|
&cal);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (cal == 0) {
|
|
dev_warn(dev, "chip not calibrated, reinitializing\n");
|
|
|
|
ret = ina2xx_init(data);
|
|
if (ret < 0)
|
|
return ret;
|
|
/*
|
|
* Let's make sure the power and current
|
|
* registers have been updated before trying
|
|
* again.
|
|
*/
|
|
msleep(INA2XX_MAX_DELAY);
|
|
continue;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we're here then although all write operations succeeded, the
|
|
* chip still returns 0 in the calibration register. Nothing more we
|
|
* can do here.
|
|
*/
|
|
dev_err(dev, "unable to reinitialize the chip\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int ina2xx_get_value(struct ina2xx_data *data, u8 reg,
|
|
unsigned int regval)
|
|
{
|
|
int val;
|
|
|
|
switch (reg) {
|
|
case INA2XX_SHUNT_VOLTAGE:
|
|
/* signed register */
|
|
val = DIV_ROUND_CLOSEST((s16)regval, data->config->shunt_div);
|
|
break;
|
|
case INA2XX_BUS_VOLTAGE:
|
|
val = (regval >> data->config->bus_voltage_shift)
|
|
* data->config->bus_voltage_lsb;
|
|
val = DIV_ROUND_CLOSEST(val, 1000);
|
|
break;
|
|
case INA2XX_POWER:
|
|
val = regval * data->power_lsb_uW;
|
|
break;
|
|
case INA2XX_CURRENT:
|
|
/* signed register, result in mA */
|
|
val = regval * data->current_lsb_uA;
|
|
val = DIV_ROUND_CLOSEST(val, 1000);
|
|
break;
|
|
case INA2XX_CALIBRATION:
|
|
val = regval;
|
|
break;
|
|
default:
|
|
/* programmer goofed */
|
|
WARN_ON_ONCE(1);
|
|
val = 0;
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static ssize_t ina2xx_show_value(struct device *dev,
|
|
struct device_attribute *da, char *buf)
|
|
{
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
|
|
struct ina2xx_data *data = dev_get_drvdata(dev);
|
|
unsigned int regval;
|
|
|
|
int err = ina2xx_read_reg(dev, attr->index, ®val);
|
|
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n",
|
|
ina2xx_get_value(data, attr->index, regval));
|
|
}
|
|
|
|
/*
|
|
* In order to keep calibration register value fixed, the product
|
|
* of current_lsb and shunt_resistor should also be fixed and equal
|
|
* to shunt_voltage_lsb = 1 / shunt_div multiplied by 10^9 in order
|
|
* to keep the scale.
|
|
*/
|
|
static int ina2xx_set_shunt(struct ina2xx_data *data, long val)
|
|
{
|
|
unsigned int dividend = DIV_ROUND_CLOSEST(1000000000,
|
|
data->config->shunt_div);
|
|
if (val <= 0 || val > dividend)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->config_lock);
|
|
data->rshunt = val;
|
|
data->current_lsb_uA = DIV_ROUND_CLOSEST(dividend, val);
|
|
data->power_lsb_uW = data->config->power_lsb_factor *
|
|
data->current_lsb_uA;
|
|
mutex_unlock(&data->config_lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t ina2xx_store_shunt(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned long val;
|
|
int status;
|
|
struct ina2xx_data *data = dev_get_drvdata(dev);
|
|
|
|
status = kstrtoul(buf, 10, &val);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
status = ina2xx_set_shunt(data, val);
|
|
if (status < 0)
|
|
return status;
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ina226_set_interval(struct device *dev,
|
|
struct device_attribute *da,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct ina2xx_data *data = dev_get_drvdata(dev);
|
|
unsigned long val;
|
|
int status;
|
|
|
|
status = kstrtoul(buf, 10, &val);
|
|
if (status < 0)
|
|
return status;
|
|
|
|
if (val > INT_MAX || val == 0)
|
|
return -EINVAL;
|
|
|
|
status = regmap_update_bits(data->regmap, INA2XX_CONFIG,
|
|
INA226_AVG_RD_MASK,
|
|
ina226_interval_to_reg(val));
|
|
if (status < 0)
|
|
return status;
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t ina226_show_interval(struct device *dev,
|
|
struct device_attribute *da, char *buf)
|
|
{
|
|
struct ina2xx_data *data = dev_get_drvdata(dev);
|
|
int status;
|
|
unsigned int regval;
|
|
|
|
status = regmap_read(data->regmap, INA2XX_CONFIG, ®val);
|
|
if (status)
|
|
return status;
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", ina226_reg_to_interval(regval));
|
|
}
|
|
|
|
/* shunt voltage */
|
|
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, ina2xx_show_value, NULL,
|
|
INA2XX_SHUNT_VOLTAGE);
|
|
|
|
/* bus voltage */
|
|
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, ina2xx_show_value, NULL,
|
|
INA2XX_BUS_VOLTAGE);
|
|
|
|
/* calculated current */
|
|
static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, ina2xx_show_value, NULL,
|
|
INA2XX_CURRENT);
|
|
|
|
/* calculated power */
|
|
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, ina2xx_show_value, NULL,
|
|
INA2XX_POWER);
|
|
|
|
/* shunt resistance */
|
|
static SENSOR_DEVICE_ATTR(shunt_resistor, S_IRUGO | S_IWUSR,
|
|
ina2xx_show_value, ina2xx_store_shunt,
|
|
INA2XX_CALIBRATION);
|
|
|
|
/* update interval (ina226 only) */
|
|
static SENSOR_DEVICE_ATTR(update_interval, S_IRUGO | S_IWUSR,
|
|
ina226_show_interval, ina226_set_interval, 0);
|
|
|
|
/* pointers to created device attributes */
|
|
static struct attribute *ina2xx_attrs[] = {
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_curr1_input.dev_attr.attr,
|
|
&sensor_dev_attr_power1_input.dev_attr.attr,
|
|
&sensor_dev_attr_shunt_resistor.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group ina2xx_group = {
|
|
.attrs = ina2xx_attrs,
|
|
};
|
|
|
|
static struct attribute *ina226_attrs[] = {
|
|
&sensor_dev_attr_update_interval.dev_attr.attr,
|
|
NULL,
|
|
};
|
|
|
|
static const struct attribute_group ina226_group = {
|
|
.attrs = ina226_attrs,
|
|
};
|
|
|
|
static int ina2xx_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct ina2xx_data *data;
|
|
struct device *hwmon_dev;
|
|
u32 val;
|
|
int ret, group = 0;
|
|
enum ina2xx_ids chip;
|
|
|
|
if (client->dev.of_node)
|
|
chip = (enum ina2xx_ids)of_device_get_match_data(&client->dev);
|
|
else
|
|
chip = id->driver_data;
|
|
|
|
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
/* set the device type */
|
|
data->config = &ina2xx_config[chip];
|
|
mutex_init(&data->config_lock);
|
|
|
|
if (of_property_read_u32(dev->of_node, "shunt-resistor", &val) < 0) {
|
|
struct ina2xx_platform_data *pdata = dev_get_platdata(dev);
|
|
|
|
if (pdata)
|
|
val = pdata->shunt_uohms;
|
|
else
|
|
val = INA2XX_RSHUNT_DEFAULT;
|
|
}
|
|
|
|
ina2xx_set_shunt(data, val);
|
|
|
|
ina2xx_regmap_config.max_register = data->config->registers;
|
|
|
|
data->regmap = devm_regmap_init_i2c(client, &ina2xx_regmap_config);
|
|
if (IS_ERR(data->regmap)) {
|
|
dev_err(dev, "failed to allocate register map\n");
|
|
return PTR_ERR(data->regmap);
|
|
}
|
|
|
|
ret = ina2xx_init(data);
|
|
if (ret < 0) {
|
|
dev_err(dev, "error configuring the device: %d\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
data->groups[group++] = &ina2xx_group;
|
|
if (id->driver_data == ina226)
|
|
data->groups[group++] = &ina226_group;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
|
|
data, data->groups);
|
|
if (IS_ERR(hwmon_dev))
|
|
return PTR_ERR(hwmon_dev);
|
|
|
|
dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n",
|
|
id->name, data->rshunt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct i2c_device_id ina2xx_id[] = {
|
|
{ "ina219", ina219 },
|
|
{ "ina220", ina219 },
|
|
{ "ina226", ina226 },
|
|
{ "ina230", ina226 },
|
|
{ "ina231", ina226 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ina2xx_id);
|
|
|
|
static const struct of_device_id ina2xx_of_match[] = {
|
|
{
|
|
.compatible = "ti,ina219",
|
|
.data = (void *)ina219
|
|
},
|
|
{
|
|
.compatible = "ti,ina220",
|
|
.data = (void *)ina219
|
|
},
|
|
{
|
|
.compatible = "ti,ina226",
|
|
.data = (void *)ina226
|
|
},
|
|
{
|
|
.compatible = "ti,ina230",
|
|
.data = (void *)ina226
|
|
},
|
|
{
|
|
.compatible = "ti,ina231",
|
|
.data = (void *)ina226
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ina2xx_of_match);
|
|
|
|
static struct i2c_driver ina2xx_driver = {
|
|
.driver = {
|
|
.name = "ina2xx",
|
|
.of_match_table = of_match_ptr(ina2xx_of_match),
|
|
},
|
|
.probe = ina2xx_probe,
|
|
.id_table = ina2xx_id,
|
|
};
|
|
|
|
module_i2c_driver(ina2xx_driver);
|
|
|
|
MODULE_AUTHOR("Lothar Felten <l-felten@ti.com>");
|
|
MODULE_DESCRIPTION("ina2xx driver");
|
|
MODULE_LICENSE("GPL");
|