linux-stable/drivers/perf/Kconfig
Shuai Xue af9597adc2 drivers/perf: add DesignWare PCIe PMU driver
This commit adds the PCIe Performance Monitoring Unit (PMU) driver support
for T-Head Yitian SoC chip. Yitian is based on the Synopsys PCI Express
Core controller IP which provides statistics feature. The PMU is a PCIe
configuration space register block provided by each PCIe Root Port in a
Vendor-Specific Extended Capability named RAS D.E.S (Debug, Error
injection, and Statistics).

To facilitate collection of statistics the controller provides the
following two features for each Root Port:

- one 64-bit counter for Time Based Analysis (RX/TX data throughput and
  time spent in each low-power LTSSM state) and
- one 32-bit counter for Event Counting (error and non-error events for
  a specified lane)

Note: There is no interrupt for counter overflow.

This driver adds PMU devices for each PCIe Root Port. And the PMU device is
named based the BDF of Root Port. For example,

    30:03.0 PCI bridge: Device 1ded:8000 (rev 01)

the PMU device name for this Root Port is dwc_rootport_3018.

Example usage of counting PCIe RX TLP data payload (Units of bytes)::

    $# perf stat -a -e dwc_rootport_3018/Rx_PCIe_TLP_Data_Payload/

average RX bandwidth can be calculated like this:

    PCIe TX Bandwidth = Rx_PCIe_TLP_Data_Payload / Measure_Time_Window

Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-and-tested-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Link: https://lore.kernel.org/r/20231208025652.87192-5-xueshuai@linux.alibaba.com
[will: Fix sparse error due to use of uninitialised 'vsec' symbol in
 dwc_pcie_match_des_cap()]
Signed-off-by: Will Deacon <will@kernel.org>
2023-12-13 15:35:28 +00:00

244 lines
7.4 KiB
Text

# SPDX-License-Identifier: GPL-2.0-only
#
# Performance Monitor Drivers
#
menu "Performance monitor support"
depends on PERF_EVENTS
config ARM_CCI_PMU
tristate "ARM CCI PMU driver"
depends on (ARM && CPU_V7) || ARM64
select ARM_CCI
help
Support for PMU events monitoring on the ARM CCI (Cache Coherent
Interconnect) family of products.
If compiled as a module, it will be called arm-cci.
config ARM_CCI400_PMU
bool "support CCI-400"
default y
depends on ARM_CCI_PMU
select ARM_CCI400_COMMON
help
CCI-400 provides 4 independent event counters counting events related
to the connected slave/master interfaces, plus a cycle counter.
config ARM_CCI5xx_PMU
bool "support CCI-500/CCI-550"
default y
depends on ARM_CCI_PMU
help
CCI-500/CCI-550 both provide 8 independent event counters, which can
count events pertaining to the slave/master interfaces as well as the
internal events to the CCI.
config ARM_CCN
tristate "ARM CCN driver support"
depends on ARM || ARM64 || COMPILE_TEST
help
PMU (perf) driver supporting the ARM CCN (Cache Coherent Network)
interconnect.
config ARM_CMN
tristate "Arm CMN-600 PMU support"
depends on ARM64 || COMPILE_TEST
help
Support for PMU events monitoring on the Arm CMN-600 Coherent Mesh
Network interconnect.
config ARM_PMU
depends on ARM || ARM64
bool "ARM PMU framework"
default y
help
Say y if you want to use CPU performance monitors on ARM-based
systems.
config RISCV_PMU
depends on RISCV
bool "RISC-V PMU framework"
default y
help
Say y if you want to use CPU performance monitors on RISCV-based
systems. This provides the core PMU framework that abstracts common
PMU functionalities in a core library so that different PMU drivers
can reuse it.
config RISCV_PMU_LEGACY
depends on RISCV_PMU
bool "RISC-V legacy PMU implementation"
default y
help
Say y if you want to use the legacy CPU performance monitor
implementation on RISC-V based systems. This only allows counting
of cycle/instruction counter and doesn't support counter overflow,
or programmable counters. It will be removed in future.
config RISCV_PMU_SBI
depends on RISCV_PMU && RISCV_SBI
bool "RISC-V PMU based on SBI PMU extension"
default y
help
Say y if you want to use the CPU performance monitor
using SBI PMU extension on RISC-V based systems. This option provides
full perf feature support i.e. counter overflow, privilege mode
filtering, counter configuration.
config ARM_PMU_ACPI
depends on ARM_PMU && ACPI
def_bool y
config ARM_SMMU_V3_PMU
tristate "ARM SMMUv3 Performance Monitors Extension"
depends on ARM64 || (COMPILE_TEST && 64BIT)
depends on GENERIC_MSI_IRQ
help
Provides support for the ARM SMMUv3 Performance Monitor Counter
Groups (PMCG), which provide monitoring of transactions passing
through the SMMU and allow the resulting information to be filtered
based on the Stream ID of the corresponding master.
config ARM_PMUV3
depends on HW_PERF_EVENTS && ((ARM && CPU_V7) || ARM64)
bool "ARM PMUv3 support" if !ARM64
default ARM64
help
Say y if you want to use the ARM performance monitor unit (PMU)
version 3. The PMUv3 is the CPU performance monitors on ARMv8
(aarch32 and aarch64) systems that implement the PMUv3
architecture.
config ARM_DSU_PMU
tristate "ARM DynamIQ Shared Unit (DSU) PMU"
depends on ARM64
help
Provides support for performance monitor unit in ARM DynamIQ Shared
Unit (DSU). The DSU integrates one or more cores with an L3 memory
system, control logic. The PMU allows counting various events related
to DSU.
config FSL_IMX8_DDR_PMU
tristate "Freescale i.MX8 DDR perf monitor"
depends on ARCH_MXC || COMPILE_TEST
help
Provides support for the DDR performance monitor in i.MX8, which
can give information about memory throughput and other related
events.
config FSL_IMX9_DDR_PMU
tristate "Freescale i.MX9 DDR perf monitor"
depends on ARCH_MXC
help
Provides support for the DDR performance monitor in i.MX9, which
can give information about memory throughput and other related
events.
config QCOM_L2_PMU
bool "Qualcomm Technologies L2-cache PMU"
depends on ARCH_QCOM && ARM64 && ACPI
select QCOM_KRYO_L2_ACCESSORS
help
Provides support for the L2 cache performance monitor unit (PMU)
in Qualcomm Technologies processors.
Adds the L2 cache PMU into the perf events subsystem for
monitoring L2 cache events.
config QCOM_L3_PMU
bool "Qualcomm Technologies L3-cache PMU"
depends on ARCH_QCOM && ARM64 && ACPI
select QCOM_IRQ_COMBINER
help
Provides support for the L3 cache performance monitor unit (PMU)
in Qualcomm Technologies processors.
Adds the L3 cache PMU into the perf events subsystem for
monitoring L3 cache events.
config THUNDERX2_PMU
tristate "Cavium ThunderX2 SoC PMU UNCORE"
depends on ARCH_THUNDER2 || COMPILE_TEST
depends on NUMA && ACPI
default m
help
Provides support for ThunderX2 UNCORE events.
The SoC has PMU support in its L3 cache controller (L3C) and
in the DDR4 Memory Controller (DMC).
config XGENE_PMU
depends on ARCH_XGENE || (COMPILE_TEST && 64BIT)
bool "APM X-Gene SoC PMU"
default n
help
Say y if you want to use APM X-Gene SoC performance monitors.
config ARM_SPE_PMU
tristate "Enable support for the ARMv8.2 Statistical Profiling Extension"
depends on ARM64
help
Enable perf support for the ARMv8.2 Statistical Profiling
Extension, which provides periodic sampling of operations in
the CPU pipeline and reports this via the perf AUX interface.
config ARM_DMC620_PMU
tristate "Enable PMU support for the ARM DMC-620 memory controller"
depends on (ARM64 && ACPI) || COMPILE_TEST
help
Support for PMU events monitoring on the ARM DMC-620 memory
controller.
config MARVELL_CN10K_TAD_PMU
tristate "Marvell CN10K LLC-TAD PMU"
depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT)
help
Provides support for Last-Level cache Tag-and-data Units (LLC-TAD)
performance monitors on CN10K family silicons.
config APPLE_M1_CPU_PMU
bool "Apple M1 CPU PMU support"
depends on ARM_PMU && ARCH_APPLE
help
Provides support for the non-architectural CPU PMUs present on
the Apple M1 SoCs and derivatives.
config ALIBABA_UNCORE_DRW_PMU
tristate "Alibaba T-Head Yitian 710 DDR Sub-system Driveway PMU driver"
depends on (ARM64 && ACPI) || COMPILE_TEST
help
Support for Driveway PMU events monitoring on Yitian 710 DDR
Sub-system.
source "drivers/perf/hisilicon/Kconfig"
config MARVELL_CN10K_DDR_PMU
tristate "Enable MARVELL CN10K DRAM Subsystem(DSS) PMU Support"
depends on ARCH_THUNDER || (COMPILE_TEST && 64BIT)
help
Enable perf support for Marvell DDR Performance monitoring
event on CN10K platform.
config DWC_PCIE_PMU
tristate "Synopsys DesignWare PCIe PMU"
depends on PCI
help
Enable perf support for Synopsys DesignWare PCIe PMU Performance
monitoring event on platform including the Alibaba Yitian 710.
source "drivers/perf/arm_cspmu/Kconfig"
source "drivers/perf/amlogic/Kconfig"
config CXL_PMU
tristate "CXL Performance Monitoring Unit"
depends on CXL_BUS
help
Support performance monitoring as defined in CXL rev 3.0
section 13.2: Performance Monitoring. CXL components may have
one or more CXL Performance Monitoring Units (CPMUs).
Say 'y/m' to enable a driver that will attach to performance
monitoring units and provide standard perf based interfaces.
If unsure say 'm'.
endmenu