mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Greg Kroah-Hartman](/assets/img/avatar_default.png)
The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Rogier Wolff <R.E.Wolff@bitwizard.nl> Cc: Michael H. Warfield <mhw@wittsend.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
327 lines
7.6 KiB
C
327 lines
7.6 KiB
C
/*
|
|
* Driver for the 98626/98644/internal serial interface on hp300/hp400
|
|
* (based on the National Semiconductor INS8250/NS16550AF/WD16C552 UARTs)
|
|
*
|
|
* Ported from 2.2 and modified to use the normal 8250 driver
|
|
* by Kars de Jong <jongk@linux-m68k.org>, May 2004.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial_8250.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/dio.h>
|
|
#include <linux/console.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "8250.h"
|
|
|
|
#if !defined(CONFIG_HPDCA) && !defined(CONFIG_HPAPCI)
|
|
#warning CONFIG_8250 defined but neither CONFIG_HPDCA nor CONFIG_HPAPCI defined, are you sure?
|
|
#endif
|
|
|
|
#ifdef CONFIG_HPAPCI
|
|
struct hp300_port
|
|
{
|
|
struct hp300_port *next; /* next port */
|
|
int line; /* line (tty) number */
|
|
};
|
|
|
|
static struct hp300_port *hp300_ports;
|
|
#endif
|
|
|
|
#ifdef CONFIG_HPDCA
|
|
|
|
static int __devinit hpdca_init_one(struct dio_dev *d,
|
|
const struct dio_device_id *ent);
|
|
static void __devexit hpdca_remove_one(struct dio_dev *d);
|
|
|
|
static struct dio_device_id hpdca_dio_tbl[] = {
|
|
{ DIO_ID_DCA0 },
|
|
{ DIO_ID_DCA0REM },
|
|
{ DIO_ID_DCA1 },
|
|
{ DIO_ID_DCA1REM },
|
|
{ 0 }
|
|
};
|
|
|
|
static struct dio_driver hpdca_driver = {
|
|
.name = "hpdca",
|
|
.id_table = hpdca_dio_tbl,
|
|
.probe = hpdca_init_one,
|
|
.remove = __devexit_p(hpdca_remove_one),
|
|
};
|
|
|
|
#endif
|
|
|
|
static unsigned int num_ports;
|
|
|
|
extern int hp300_uart_scode;
|
|
|
|
/* Offset to UART registers from base of DCA */
|
|
#define UART_OFFSET 17
|
|
|
|
#define DCA_ID 0x01 /* ID (read), reset (write) */
|
|
#define DCA_IC 0x03 /* Interrupt control */
|
|
|
|
/* Interrupt control */
|
|
#define DCA_IC_IE 0x80 /* Master interrupt enable */
|
|
|
|
#define HPDCA_BAUD_BASE 153600
|
|
|
|
/* Base address of the Frodo part */
|
|
#define FRODO_BASE (0x41c000)
|
|
|
|
/*
|
|
* Where we find the 8250-like APCI ports, and how far apart they are.
|
|
*/
|
|
#define FRODO_APCIBASE 0x0
|
|
#define FRODO_APCISPACE 0x20
|
|
#define FRODO_APCI_OFFSET(x) (FRODO_APCIBASE + ((x) * FRODO_APCISPACE))
|
|
|
|
#define HPAPCI_BAUD_BASE 500400
|
|
|
|
#ifdef CONFIG_SERIAL_8250_CONSOLE
|
|
/*
|
|
* Parse the bootinfo to find descriptions for headless console and
|
|
* debug serial ports and register them with the 8250 driver.
|
|
* This function should be called before serial_console_init() is called
|
|
* to make sure the serial console will be available for use. IA-64 kernel
|
|
* calls this function from setup_arch() after the EFI and ACPI tables have
|
|
* been parsed.
|
|
*/
|
|
int __init hp300_setup_serial_console(void)
|
|
{
|
|
int scode;
|
|
struct uart_port port;
|
|
|
|
memset(&port, 0, sizeof(port));
|
|
|
|
if (hp300_uart_scode < 0 || hp300_uart_scode > DIO_SCMAX)
|
|
return 0;
|
|
|
|
if (DIO_SCINHOLE(hp300_uart_scode))
|
|
return 0;
|
|
|
|
scode = hp300_uart_scode;
|
|
|
|
/* Memory mapped I/O */
|
|
port.iotype = UPIO_MEM;
|
|
port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
|
|
port.type = PORT_UNKNOWN;
|
|
|
|
/* Check for APCI console */
|
|
if (scode == 256) {
|
|
#ifdef CONFIG_HPAPCI
|
|
printk(KERN_INFO "Serial console is HP APCI 1\n");
|
|
|
|
port.uartclk = HPAPCI_BAUD_BASE * 16;
|
|
port.mapbase = (FRODO_BASE + FRODO_APCI_OFFSET(1));
|
|
port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
|
|
port.regshift = 2;
|
|
add_preferred_console("ttyS", port.line, "9600n8");
|
|
#else
|
|
printk(KERN_WARNING "Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");
|
|
return 0;
|
|
#endif
|
|
} else {
|
|
#ifdef CONFIG_HPDCA
|
|
unsigned long pa = dio_scodetophysaddr(scode);
|
|
if (!pa)
|
|
return 0;
|
|
|
|
printk(KERN_INFO "Serial console is HP DCA at select code %d\n", scode);
|
|
|
|
port.uartclk = HPDCA_BAUD_BASE * 16;
|
|
port.mapbase = (pa + UART_OFFSET);
|
|
port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
|
|
port.regshift = 1;
|
|
port.irq = DIO_IPL(pa + DIO_VIRADDRBASE);
|
|
|
|
/* Enable board-interrupts */
|
|
out_8(pa + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
|
|
|
|
if (DIO_ID(pa + DIO_VIRADDRBASE) & 0x80)
|
|
add_preferred_console("ttyS", port.line, "9600n8");
|
|
#else
|
|
printk(KERN_WARNING "Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
if (early_serial_setup(&port) < 0)
|
|
printk(KERN_WARNING "hp300_setup_serial_console(): early_serial_setup() failed.\n");
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_SERIAL_8250_CONSOLE */
|
|
|
|
#ifdef CONFIG_HPDCA
|
|
static int __devinit hpdca_init_one(struct dio_dev *d,
|
|
const struct dio_device_id *ent)
|
|
{
|
|
struct uart_port port;
|
|
int line;
|
|
|
|
#ifdef CONFIG_SERIAL_8250_CONSOLE
|
|
if (hp300_uart_scode == d->scode) {
|
|
/* Already got it. */
|
|
return 0;
|
|
}
|
|
#endif
|
|
memset(&port, 0, sizeof(struct uart_port));
|
|
|
|
/* Memory mapped I/O */
|
|
port.iotype = UPIO_MEM;
|
|
port.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF;
|
|
port.irq = d->ipl;
|
|
port.uartclk = HPDCA_BAUD_BASE * 16;
|
|
port.mapbase = (d->resource.start + UART_OFFSET);
|
|
port.membase = (char *)(port.mapbase + DIO_VIRADDRBASE);
|
|
port.regshift = 1;
|
|
port.dev = &d->dev;
|
|
line = serial8250_register_port(&port);
|
|
|
|
if (line < 0) {
|
|
printk(KERN_NOTICE "8250_hp300: register_serial() DCA scode %d"
|
|
" irq %d failed\n", d->scode, port.irq);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Enable board-interrupts */
|
|
out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, DCA_IC_IE);
|
|
dio_set_drvdata(d, (void *)line);
|
|
|
|
/* Reset the DCA */
|
|
out_8(d->resource.start + DIO_VIRADDRBASE + DCA_ID, 0xff);
|
|
udelay(100);
|
|
|
|
num_ports++;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int __init hp300_8250_init(void)
|
|
{
|
|
static int called;
|
|
#ifdef CONFIG_HPAPCI
|
|
int line;
|
|
unsigned long base;
|
|
struct uart_port uport;
|
|
struct hp300_port *port;
|
|
int i;
|
|
#endif
|
|
if (called)
|
|
return -ENODEV;
|
|
called = 1;
|
|
|
|
if (!MACH_IS_HP300)
|
|
return -ENODEV;
|
|
|
|
#ifdef CONFIG_HPDCA
|
|
dio_register_driver(&hpdca_driver);
|
|
#endif
|
|
#ifdef CONFIG_HPAPCI
|
|
if (hp300_model < HP_400) {
|
|
if (!num_ports)
|
|
return -ENODEV;
|
|
return 0;
|
|
}
|
|
/* These models have the Frodo chip.
|
|
* Port 0 is reserved for the Apollo Domain keyboard.
|
|
* Port 1 is either the console or the DCA.
|
|
*/
|
|
for (i = 1; i < 4; i++) {
|
|
/* Port 1 is the console on a 425e, on other machines it's
|
|
* mapped to DCA.
|
|
*/
|
|
#ifdef CONFIG_SERIAL_8250_CONSOLE
|
|
if (i == 1)
|
|
continue;
|
|
#endif
|
|
|
|
/* Create new serial device */
|
|
port = kmalloc(sizeof(struct hp300_port), GFP_KERNEL);
|
|
if (!port)
|
|
return -ENOMEM;
|
|
|
|
memset(&uport, 0, sizeof(struct uart_port));
|
|
|
|
base = (FRODO_BASE + FRODO_APCI_OFFSET(i));
|
|
|
|
/* Memory mapped I/O */
|
|
uport.iotype = UPIO_MEM;
|
|
uport.flags = UPF_SKIP_TEST | UPF_SHARE_IRQ \
|
|
| UPF_BOOT_AUTOCONF;
|
|
/* XXX - no interrupt support yet */
|
|
uport.irq = 0;
|
|
uport.uartclk = HPAPCI_BAUD_BASE * 16;
|
|
uport.mapbase = base;
|
|
uport.membase = (char *)(base + DIO_VIRADDRBASE);
|
|
uport.regshift = 2;
|
|
|
|
line = serial8250_register_port(&uport);
|
|
|
|
if (line < 0) {
|
|
printk(KERN_NOTICE "8250_hp300: register_serial() APCI"
|
|
" %d irq %d failed\n", i, uport.irq);
|
|
kfree(port);
|
|
continue;
|
|
}
|
|
|
|
port->line = line;
|
|
port->next = hp300_ports;
|
|
hp300_ports = port;
|
|
|
|
num_ports++;
|
|
}
|
|
#endif
|
|
|
|
/* Any boards found? */
|
|
if (!num_ports)
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_HPDCA
|
|
static void __devexit hpdca_remove_one(struct dio_dev *d)
|
|
{
|
|
int line;
|
|
|
|
line = (int) dio_get_drvdata(d);
|
|
if (d->resource.start) {
|
|
/* Disable board-interrupts */
|
|
out_8(d->resource.start + DIO_VIRADDRBASE + DCA_IC, 0);
|
|
}
|
|
serial8250_unregister_port(line);
|
|
}
|
|
#endif
|
|
|
|
static void __exit hp300_8250_exit(void)
|
|
{
|
|
#ifdef CONFIG_HPAPCI
|
|
struct hp300_port *port, *to_free;
|
|
|
|
for (port = hp300_ports; port; ) {
|
|
serial8250_unregister_port(port->line);
|
|
to_free = port;
|
|
port = port->next;
|
|
kfree(to_free);
|
|
}
|
|
|
|
hp300_ports = NULL;
|
|
#endif
|
|
#ifdef CONFIG_HPDCA
|
|
dio_unregister_driver(&hpdca_driver);
|
|
#endif
|
|
}
|
|
|
|
module_init(hp300_8250_init);
|
|
module_exit(hp300_8250_exit);
|
|
MODULE_DESCRIPTION("HP DCA/APCI serial driver");
|
|
MODULE_AUTHOR("Kars de Jong <jongk@linux-m68k.org>");
|
|
MODULE_LICENSE("GPL");
|