mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-08-28 20:02:17 +00:00
![Lucas De Marchi](/assets/img/avatar_default.png)
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
1362 lines
36 KiB
C
1362 lines
36 KiB
C
/*
|
|
* Driver for OMAP-UART controller.
|
|
* Based on drivers/serial/8250.c
|
|
*
|
|
* Copyright (C) 2010 Texas Instruments.
|
|
*
|
|
* Authors:
|
|
* Govindraj R <govindraj.raja@ti.com>
|
|
* Thara Gopinath <thara@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* Note: This driver is made separate from 8250 driver as we cannot
|
|
* over load 8250 driver with omap platform specific configuration for
|
|
* features like DMA, it makes easier to implement features like DMA and
|
|
* hardware flow control and software flow control configuration with
|
|
* this driver as required for the omap-platform.
|
|
*/
|
|
|
|
#if defined(CONFIG_SERIAL_OMAP_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/serial_reg.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/io.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/irq.h>
|
|
|
|
#include <plat/dma.h>
|
|
#include <plat/dmtimer.h>
|
|
#include <plat/omap-serial.h>
|
|
|
|
static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS];
|
|
|
|
/* Forward declaration of functions */
|
|
static void uart_tx_dma_callback(int lch, u16 ch_status, void *data);
|
|
static void serial_omap_rx_timeout(unsigned long uart_no);
|
|
static int serial_omap_start_rxdma(struct uart_omap_port *up);
|
|
|
|
static inline unsigned int serial_in(struct uart_omap_port *up, int offset)
|
|
{
|
|
offset <<= up->port.regshift;
|
|
return readw(up->port.membase + offset);
|
|
}
|
|
|
|
static inline void serial_out(struct uart_omap_port *up, int offset, int value)
|
|
{
|
|
offset <<= up->port.regshift;
|
|
writew(value, up->port.membase + offset);
|
|
}
|
|
|
|
static inline void serial_omap_clear_fifos(struct uart_omap_port *up)
|
|
{
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO);
|
|
serial_out(up, UART_FCR, UART_FCR_ENABLE_FIFO |
|
|
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
|
|
serial_out(up, UART_FCR, 0);
|
|
}
|
|
|
|
/*
|
|
* serial_omap_get_divisor - calculate divisor value
|
|
* @port: uart port info
|
|
* @baud: baudrate for which divisor needs to be calculated.
|
|
*
|
|
* We have written our own function to get the divisor so as to support
|
|
* 13x mode. 3Mbps Baudrate as an different divisor.
|
|
* Reference OMAP TRM Chapter 17:
|
|
* Table 17-1. UART Mode Baud Rates, Divisor Values, and Error Rates
|
|
* referring to oversampling - divisor value
|
|
* baudrate 460,800 to 3,686,400 all have divisor 13
|
|
* except 3,000,000 which has divisor value 16
|
|
*/
|
|
static unsigned int
|
|
serial_omap_get_divisor(struct uart_port *port, unsigned int baud)
|
|
{
|
|
unsigned int divisor;
|
|
|
|
if (baud > OMAP_MODE13X_SPEED && baud != 3000000)
|
|
divisor = 13;
|
|
else
|
|
divisor = 16;
|
|
return port->uartclk/(baud * divisor);
|
|
}
|
|
|
|
static void serial_omap_stop_rxdma(struct uart_omap_port *up)
|
|
{
|
|
if (up->uart_dma.rx_dma_used) {
|
|
del_timer(&up->uart_dma.rx_timer);
|
|
omap_stop_dma(up->uart_dma.rx_dma_channel);
|
|
omap_free_dma(up->uart_dma.rx_dma_channel);
|
|
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
|
|
up->uart_dma.rx_dma_used = false;
|
|
}
|
|
}
|
|
|
|
static void serial_omap_enable_ms(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_enable_ms+%d\n", up->pdev->id);
|
|
up->ier |= UART_IER_MSI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
|
|
static void serial_omap_stop_tx(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
|
|
if (up->use_dma &&
|
|
up->uart_dma.tx_dma_channel != OMAP_UART_DMA_CH_FREE) {
|
|
/*
|
|
* Check if dma is still active. If yes do nothing,
|
|
* return. Else stop dma
|
|
*/
|
|
if (omap_get_dma_active_status(up->uart_dma.tx_dma_channel))
|
|
return;
|
|
omap_stop_dma(up->uart_dma.tx_dma_channel);
|
|
omap_free_dma(up->uart_dma.tx_dma_channel);
|
|
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
|
|
}
|
|
|
|
if (up->ier & UART_IER_THRI) {
|
|
up->ier &= ~UART_IER_THRI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
}
|
|
|
|
static void serial_omap_stop_rx(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
|
|
if (up->use_dma)
|
|
serial_omap_stop_rxdma(up);
|
|
up->ier &= ~UART_IER_RLSI;
|
|
up->port.read_status_mask &= ~UART_LSR_DR;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
|
|
static inline void receive_chars(struct uart_omap_port *up, int *status)
|
|
{
|
|
struct tty_struct *tty = up->port.state->port.tty;
|
|
unsigned int flag;
|
|
unsigned char ch, lsr = *status;
|
|
int max_count = 256;
|
|
|
|
do {
|
|
if (likely(lsr & UART_LSR_DR))
|
|
ch = serial_in(up, UART_RX);
|
|
flag = TTY_NORMAL;
|
|
up->port.icount.rx++;
|
|
|
|
if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) {
|
|
/*
|
|
* For statistics only
|
|
*/
|
|
if (lsr & UART_LSR_BI) {
|
|
lsr &= ~(UART_LSR_FE | UART_LSR_PE);
|
|
up->port.icount.brk++;
|
|
/*
|
|
* We do the SysRQ and SAK checking
|
|
* here because otherwise the break
|
|
* may get masked by ignore_status_mask
|
|
* or read_status_mask.
|
|
*/
|
|
if (uart_handle_break(&up->port))
|
|
goto ignore_char;
|
|
} else if (lsr & UART_LSR_PE) {
|
|
up->port.icount.parity++;
|
|
} else if (lsr & UART_LSR_FE) {
|
|
up->port.icount.frame++;
|
|
}
|
|
|
|
if (lsr & UART_LSR_OE)
|
|
up->port.icount.overrun++;
|
|
|
|
/*
|
|
* Mask off conditions which should be ignored.
|
|
*/
|
|
lsr &= up->port.read_status_mask;
|
|
|
|
#ifdef CONFIG_SERIAL_OMAP_CONSOLE
|
|
if (up->port.line == up->port.cons->index) {
|
|
/* Recover the break flag from console xmit */
|
|
lsr |= up->lsr_break_flag;
|
|
}
|
|
#endif
|
|
if (lsr & UART_LSR_BI)
|
|
flag = TTY_BREAK;
|
|
else if (lsr & UART_LSR_PE)
|
|
flag = TTY_PARITY;
|
|
else if (lsr & UART_LSR_FE)
|
|
flag = TTY_FRAME;
|
|
}
|
|
|
|
if (uart_handle_sysrq_char(&up->port, ch))
|
|
goto ignore_char;
|
|
uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
|
|
ignore_char:
|
|
lsr = serial_in(up, UART_LSR);
|
|
} while ((lsr & (UART_LSR_DR | UART_LSR_BI)) && (max_count-- > 0));
|
|
spin_unlock(&up->port.lock);
|
|
tty_flip_buffer_push(tty);
|
|
spin_lock(&up->port.lock);
|
|
}
|
|
|
|
static void transmit_chars(struct uart_omap_port *up)
|
|
{
|
|
struct circ_buf *xmit = &up->port.state->xmit;
|
|
int count;
|
|
|
|
if (up->port.x_char) {
|
|
serial_out(up, UART_TX, up->port.x_char);
|
|
up->port.icount.tx++;
|
|
up->port.x_char = 0;
|
|
return;
|
|
}
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
|
|
serial_omap_stop_tx(&up->port);
|
|
return;
|
|
}
|
|
count = up->port.fifosize / 4;
|
|
do {
|
|
serial_out(up, UART_TX, xmit->buf[xmit->tail]);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
up->port.icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
} while (--count > 0);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
serial_omap_stop_tx(&up->port);
|
|
}
|
|
|
|
static inline void serial_omap_enable_ier_thri(struct uart_omap_port *up)
|
|
{
|
|
if (!(up->ier & UART_IER_THRI)) {
|
|
up->ier |= UART_IER_THRI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
}
|
|
|
|
static void serial_omap_start_tx(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
struct circ_buf *xmit;
|
|
unsigned int start;
|
|
int ret = 0;
|
|
|
|
if (!up->use_dma) {
|
|
serial_omap_enable_ier_thri(up);
|
|
return;
|
|
}
|
|
|
|
if (up->uart_dma.tx_dma_used)
|
|
return;
|
|
|
|
xmit = &up->port.state->xmit;
|
|
|
|
if (up->uart_dma.tx_dma_channel == OMAP_UART_DMA_CH_FREE) {
|
|
ret = omap_request_dma(up->uart_dma.uart_dma_tx,
|
|
"UART Tx DMA",
|
|
(void *)uart_tx_dma_callback, up,
|
|
&(up->uart_dma.tx_dma_channel));
|
|
|
|
if (ret < 0) {
|
|
serial_omap_enable_ier_thri(up);
|
|
return;
|
|
}
|
|
}
|
|
spin_lock(&(up->uart_dma.tx_lock));
|
|
up->uart_dma.tx_dma_used = true;
|
|
spin_unlock(&(up->uart_dma.tx_lock));
|
|
|
|
start = up->uart_dma.tx_buf_dma_phys +
|
|
(xmit->tail & (UART_XMIT_SIZE - 1));
|
|
|
|
up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
|
|
/*
|
|
* It is a circular buffer. See if the buffer has wounded back.
|
|
* If yes it will have to be transferred in two separate dma
|
|
* transfers
|
|
*/
|
|
if (start + up->uart_dma.tx_buf_size >=
|
|
up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
|
|
up->uart_dma.tx_buf_size =
|
|
(up->uart_dma.tx_buf_dma_phys +
|
|
UART_XMIT_SIZE) - start;
|
|
|
|
omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
up->uart_dma.uart_base, 0, 0);
|
|
omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
|
|
OMAP_DMA_AMODE_POST_INC, start, 0, 0);
|
|
omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
|
|
OMAP_DMA_DATA_TYPE_S8,
|
|
up->uart_dma.tx_buf_size, 1,
|
|
OMAP_DMA_SYNC_ELEMENT,
|
|
up->uart_dma.uart_dma_tx, 0);
|
|
/* FIXME: Cache maintenance needed here? */
|
|
omap_start_dma(up->uart_dma.tx_dma_channel);
|
|
}
|
|
|
|
static unsigned int check_modem_status(struct uart_omap_port *up)
|
|
{
|
|
unsigned int status;
|
|
|
|
status = serial_in(up, UART_MSR);
|
|
status |= up->msr_saved_flags;
|
|
up->msr_saved_flags = 0;
|
|
if ((status & UART_MSR_ANY_DELTA) == 0)
|
|
return status;
|
|
|
|
if (status & UART_MSR_ANY_DELTA && up->ier & UART_IER_MSI &&
|
|
up->port.state != NULL) {
|
|
if (status & UART_MSR_TERI)
|
|
up->port.icount.rng++;
|
|
if (status & UART_MSR_DDSR)
|
|
up->port.icount.dsr++;
|
|
if (status & UART_MSR_DDCD)
|
|
uart_handle_dcd_change
|
|
(&up->port, status & UART_MSR_DCD);
|
|
if (status & UART_MSR_DCTS)
|
|
uart_handle_cts_change
|
|
(&up->port, status & UART_MSR_CTS);
|
|
wake_up_interruptible(&up->port.state->port.delta_msr_wait);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
/**
|
|
* serial_omap_irq() - This handles the interrupt from one port
|
|
* @irq: uart port irq number
|
|
* @dev_id: uart port info
|
|
*/
|
|
static inline irqreturn_t serial_omap_irq(int irq, void *dev_id)
|
|
{
|
|
struct uart_omap_port *up = dev_id;
|
|
unsigned int iir, lsr;
|
|
unsigned long flags;
|
|
|
|
iir = serial_in(up, UART_IIR);
|
|
if (iir & UART_IIR_NO_INT)
|
|
return IRQ_NONE;
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
lsr = serial_in(up, UART_LSR);
|
|
if (iir & UART_IIR_RLSI) {
|
|
if (!up->use_dma) {
|
|
if (lsr & UART_LSR_DR)
|
|
receive_chars(up, &lsr);
|
|
} else {
|
|
up->ier &= ~(UART_IER_RDI | UART_IER_RLSI);
|
|
serial_out(up, UART_IER, up->ier);
|
|
if ((serial_omap_start_rxdma(up) != 0) &&
|
|
(lsr & UART_LSR_DR))
|
|
receive_chars(up, &lsr);
|
|
}
|
|
}
|
|
|
|
check_modem_status(up);
|
|
if ((lsr & UART_LSR_THRE) && (iir & UART_IIR_THRI))
|
|
transmit_chars(up);
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
up->port_activity = jiffies;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static unsigned int serial_omap_tx_empty(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned long flags = 0;
|
|
unsigned int ret = 0;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_tx_empty+%d\n", up->pdev->id);
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static unsigned int serial_omap_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned char status;
|
|
unsigned int ret = 0;
|
|
|
|
status = check_modem_status(up);
|
|
dev_dbg(up->port.dev, "serial_omap_get_mctrl+%d\n", up->pdev->id);
|
|
|
|
if (status & UART_MSR_DCD)
|
|
ret |= TIOCM_CAR;
|
|
if (status & UART_MSR_RI)
|
|
ret |= TIOCM_RNG;
|
|
if (status & UART_MSR_DSR)
|
|
ret |= TIOCM_DSR;
|
|
if (status & UART_MSR_CTS)
|
|
ret |= TIOCM_CTS;
|
|
return ret;
|
|
}
|
|
|
|
static void serial_omap_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned char mcr = 0;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_set_mctrl+%d\n", up->pdev->id);
|
|
if (mctrl & TIOCM_RTS)
|
|
mcr |= UART_MCR_RTS;
|
|
if (mctrl & TIOCM_DTR)
|
|
mcr |= UART_MCR_DTR;
|
|
if (mctrl & TIOCM_OUT1)
|
|
mcr |= UART_MCR_OUT1;
|
|
if (mctrl & TIOCM_OUT2)
|
|
mcr |= UART_MCR_OUT2;
|
|
if (mctrl & TIOCM_LOOP)
|
|
mcr |= UART_MCR_LOOP;
|
|
|
|
mcr |= up->mcr;
|
|
serial_out(up, UART_MCR, mcr);
|
|
}
|
|
|
|
static void serial_omap_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned long flags = 0;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_break_ctl+%d\n", up->pdev->id);
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
if (break_state == -1)
|
|
up->lcr |= UART_LCR_SBC;
|
|
else
|
|
up->lcr &= ~UART_LCR_SBC;
|
|
serial_out(up, UART_LCR, up->lcr);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
}
|
|
|
|
static int serial_omap_startup(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned long flags = 0;
|
|
int retval;
|
|
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
retval = request_irq(up->port.irq, serial_omap_irq, up->port.irqflags,
|
|
up->name, up);
|
|
if (retval)
|
|
return retval;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->pdev->id);
|
|
|
|
/*
|
|
* Clear the FIFO buffers and disable them.
|
|
* (they will be reenabled in set_termios())
|
|
*/
|
|
serial_omap_clear_fifos(up);
|
|
/* For Hardware flow control */
|
|
serial_out(up, UART_MCR, UART_MCR_RTS);
|
|
|
|
/*
|
|
* Clear the interrupt registers.
|
|
*/
|
|
(void) serial_in(up, UART_LSR);
|
|
if (serial_in(up, UART_LSR) & UART_LSR_DR)
|
|
(void) serial_in(up, UART_RX);
|
|
(void) serial_in(up, UART_IIR);
|
|
(void) serial_in(up, UART_MSR);
|
|
|
|
/*
|
|
* Now, initialize the UART
|
|
*/
|
|
serial_out(up, UART_LCR, UART_LCR_WLEN8);
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
/*
|
|
* Most PC uarts need OUT2 raised to enable interrupts.
|
|
*/
|
|
up->port.mctrl |= TIOCM_OUT2;
|
|
serial_omap_set_mctrl(&up->port, up->port.mctrl);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
up->msr_saved_flags = 0;
|
|
if (up->use_dma) {
|
|
free_page((unsigned long)up->port.state->xmit.buf);
|
|
up->port.state->xmit.buf = dma_alloc_coherent(NULL,
|
|
UART_XMIT_SIZE,
|
|
(dma_addr_t *)&(up->uart_dma.tx_buf_dma_phys),
|
|
0);
|
|
init_timer(&(up->uart_dma.rx_timer));
|
|
up->uart_dma.rx_timer.function = serial_omap_rx_timeout;
|
|
up->uart_dma.rx_timer.data = up->pdev->id;
|
|
/* Currently the buffer size is 4KB. Can increase it */
|
|
up->uart_dma.rx_buf = dma_alloc_coherent(NULL,
|
|
up->uart_dma.rx_buf_size,
|
|
(dma_addr_t *)&(up->uart_dma.rx_buf_dma_phys), 0);
|
|
}
|
|
/*
|
|
* Finally, enable interrupts. Note: Modem status interrupts
|
|
* are set via set_termios(), which will be occurring imminently
|
|
* anyway, so we don't enable them here.
|
|
*/
|
|
up->ier = UART_IER_RLSI | UART_IER_RDI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
|
|
/* Enable module level wake up */
|
|
serial_out(up, UART_OMAP_WER, OMAP_UART_WER_MOD_WKUP);
|
|
|
|
up->port_activity = jiffies;
|
|
return 0;
|
|
}
|
|
|
|
static void serial_omap_shutdown(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned long flags = 0;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_shutdown+%d\n", up->pdev->id);
|
|
/*
|
|
* Disable interrupts from this port
|
|
*/
|
|
up->ier = 0;
|
|
serial_out(up, UART_IER, 0);
|
|
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
up->port.mctrl &= ~TIOCM_OUT2;
|
|
serial_omap_set_mctrl(&up->port, up->port.mctrl);
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Disable break condition and FIFOs
|
|
*/
|
|
serial_out(up, UART_LCR, serial_in(up, UART_LCR) & ~UART_LCR_SBC);
|
|
serial_omap_clear_fifos(up);
|
|
|
|
/*
|
|
* Read data port to reset things, and then free the irq
|
|
*/
|
|
if (serial_in(up, UART_LSR) & UART_LSR_DR)
|
|
(void) serial_in(up, UART_RX);
|
|
if (up->use_dma) {
|
|
dma_free_coherent(up->port.dev,
|
|
UART_XMIT_SIZE, up->port.state->xmit.buf,
|
|
up->uart_dma.tx_buf_dma_phys);
|
|
up->port.state->xmit.buf = NULL;
|
|
serial_omap_stop_rx(port);
|
|
dma_free_coherent(up->port.dev,
|
|
up->uart_dma.rx_buf_size, up->uart_dma.rx_buf,
|
|
up->uart_dma.rx_buf_dma_phys);
|
|
up->uart_dma.rx_buf = NULL;
|
|
}
|
|
free_irq(up->port.irq, up);
|
|
}
|
|
|
|
static inline void
|
|
serial_omap_configure_xonxoff
|
|
(struct uart_omap_port *up, struct ktermios *termios)
|
|
{
|
|
unsigned char efr = 0;
|
|
|
|
up->lcr = serial_in(up, UART_LCR);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
up->efr = serial_in(up, UART_EFR);
|
|
serial_out(up, UART_EFR, up->efr & ~UART_EFR_ECB);
|
|
|
|
serial_out(up, UART_XON1, termios->c_cc[VSTART]);
|
|
serial_out(up, UART_XOFF1, termios->c_cc[VSTOP]);
|
|
|
|
/* clear SW control mode bits */
|
|
efr = up->efr;
|
|
efr &= OMAP_UART_SW_CLR;
|
|
|
|
/*
|
|
* IXON Flag:
|
|
* Enable XON/XOFF flow control on output.
|
|
* Transmit XON1, XOFF1
|
|
*/
|
|
if (termios->c_iflag & IXON)
|
|
efr |= OMAP_UART_SW_TX;
|
|
|
|
/*
|
|
* IXOFF Flag:
|
|
* Enable XON/XOFF flow control on input.
|
|
* Receiver compares XON1, XOFF1.
|
|
*/
|
|
if (termios->c_iflag & IXOFF)
|
|
efr |= OMAP_UART_SW_RX;
|
|
|
|
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
|
|
|
|
up->mcr = serial_in(up, UART_MCR);
|
|
|
|
/*
|
|
* IXANY Flag:
|
|
* Enable any character to restart output.
|
|
* Operation resumes after receiving any
|
|
* character after recognition of the XOFF character
|
|
*/
|
|
if (termios->c_iflag & IXANY)
|
|
up->mcr |= UART_MCR_XONANY;
|
|
|
|
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
|
|
/* Enable special char function UARTi.EFR_REG[5] and
|
|
* load the new software flow control mode IXON or IXOFF
|
|
* and restore the UARTi.EFR_REG[4] ENHANCED_EN value.
|
|
*/
|
|
serial_out(up, UART_EFR, efr | UART_EFR_SCD);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
|
|
|
|
serial_out(up, UART_MCR, up->mcr & ~UART_MCR_TCRTLR);
|
|
serial_out(up, UART_LCR, up->lcr);
|
|
}
|
|
|
|
static void
|
|
serial_omap_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned char cval = 0;
|
|
unsigned char efr = 0;
|
|
unsigned long flags = 0;
|
|
unsigned int baud, quot;
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
cval = UART_LCR_WLEN5;
|
|
break;
|
|
case CS6:
|
|
cval = UART_LCR_WLEN6;
|
|
break;
|
|
case CS7:
|
|
cval = UART_LCR_WLEN7;
|
|
break;
|
|
default:
|
|
case CS8:
|
|
cval = UART_LCR_WLEN8;
|
|
break;
|
|
}
|
|
|
|
if (termios->c_cflag & CSTOPB)
|
|
cval |= UART_LCR_STOP;
|
|
if (termios->c_cflag & PARENB)
|
|
cval |= UART_LCR_PARITY;
|
|
if (!(termios->c_cflag & PARODD))
|
|
cval |= UART_LCR_EPAR;
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
|
|
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/13);
|
|
quot = serial_omap_get_divisor(port, baud);
|
|
|
|
up->fcr = UART_FCR_R_TRIG_01 | UART_FCR_T_TRIG_01 |
|
|
UART_FCR_ENABLE_FIFO;
|
|
if (up->use_dma)
|
|
up->fcr |= UART_FCR_DMA_SELECT;
|
|
|
|
/*
|
|
* Ok, we're now changing the port state. Do it with
|
|
* interrupts disabled.
|
|
*/
|
|
spin_lock_irqsave(&up->port.lock, flags);
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
|
|
if (termios->c_iflag & INPCK)
|
|
up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
up->port.read_status_mask |= UART_LSR_BI;
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
up->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
|
|
if (termios->c_iflag & IGNBRK) {
|
|
up->port.ignore_status_mask |= UART_LSR_BI;
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
up->port.ignore_status_mask |= UART_LSR_OE;
|
|
}
|
|
|
|
/*
|
|
* ignore all characters if CREAD is not set
|
|
*/
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
up->port.ignore_status_mask |= UART_LSR_DR;
|
|
|
|
/*
|
|
* Modem status interrupts
|
|
*/
|
|
up->ier &= ~UART_IER_MSI;
|
|
if (UART_ENABLE_MS(&up->port, termios->c_cflag))
|
|
up->ier |= UART_IER_MSI;
|
|
serial_out(up, UART_IER, up->ier);
|
|
serial_out(up, UART_LCR, cval); /* reset DLAB */
|
|
|
|
/* FIFOs and DMA Settings */
|
|
|
|
/* FCR can be changed only when the
|
|
* baud clock is not running
|
|
* DLL_REG and DLH_REG set to 0.
|
|
*/
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
|
|
serial_out(up, UART_DLL, 0);
|
|
serial_out(up, UART_DLM, 0);
|
|
serial_out(up, UART_LCR, 0);
|
|
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
|
|
up->efr = serial_in(up, UART_EFR);
|
|
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
|
|
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
|
|
up->mcr = serial_in(up, UART_MCR);
|
|
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
|
|
/* FIFO ENABLE, DMA MODE */
|
|
serial_out(up, UART_FCR, up->fcr);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
|
|
if (up->use_dma) {
|
|
serial_out(up, UART_TI752_TLR, 0);
|
|
serial_out(up, UART_OMAP_SCR,
|
|
(UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8));
|
|
}
|
|
|
|
serial_out(up, UART_EFR, up->efr);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
|
|
serial_out(up, UART_MCR, up->mcr);
|
|
|
|
/* Protocol, Baud Rate, and Interrupt Settings */
|
|
|
|
serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_DISABLE);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
|
|
up->efr = serial_in(up, UART_EFR);
|
|
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
|
|
|
|
serial_out(up, UART_LCR, 0);
|
|
serial_out(up, UART_IER, 0);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
|
|
serial_out(up, UART_DLL, quot & 0xff); /* LS of divisor */
|
|
serial_out(up, UART_DLM, quot >> 8); /* MS of divisor */
|
|
|
|
serial_out(up, UART_LCR, 0);
|
|
serial_out(up, UART_IER, up->ier);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
|
|
serial_out(up, UART_EFR, up->efr);
|
|
serial_out(up, UART_LCR, cval);
|
|
|
|
if (baud > 230400 && baud != 3000000)
|
|
serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_13X_MODE);
|
|
else
|
|
serial_out(up, UART_OMAP_MDR1, UART_OMAP_MDR1_16X_MODE);
|
|
|
|
/* Hardware Flow Control Configuration */
|
|
|
|
if (termios->c_cflag & CRTSCTS) {
|
|
efr |= (UART_EFR_CTS | UART_EFR_RTS);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
|
|
|
|
up->mcr = serial_in(up, UART_MCR);
|
|
serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR);
|
|
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
up->efr = serial_in(up, UART_EFR);
|
|
serial_out(up, UART_EFR, up->efr | UART_EFR_ECB);
|
|
|
|
serial_out(up, UART_TI752_TCR, OMAP_UART_TCR_TRIG);
|
|
serial_out(up, UART_EFR, efr); /* Enable AUTORTS and AUTOCTS */
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A);
|
|
serial_out(up, UART_MCR, up->mcr | UART_MCR_RTS);
|
|
serial_out(up, UART_LCR, cval);
|
|
}
|
|
|
|
serial_omap_set_mctrl(&up->port, up->port.mctrl);
|
|
/* Software Flow Control Configuration */
|
|
if (termios->c_iflag & (IXON | IXOFF))
|
|
serial_omap_configure_xonxoff(up, termios);
|
|
|
|
spin_unlock_irqrestore(&up->port.lock, flags);
|
|
dev_dbg(up->port.dev, "serial_omap_set_termios+%d\n", up->pdev->id);
|
|
}
|
|
|
|
static void
|
|
serial_omap_pm(struct uart_port *port, unsigned int state,
|
|
unsigned int oldstate)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned char efr;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_pm+%d\n", up->pdev->id);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
efr = serial_in(up, UART_EFR);
|
|
serial_out(up, UART_EFR, efr | UART_EFR_ECB);
|
|
serial_out(up, UART_LCR, 0);
|
|
|
|
serial_out(up, UART_IER, (state != 0) ? UART_IERX_SLEEP : 0);
|
|
serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B);
|
|
serial_out(up, UART_EFR, efr);
|
|
serial_out(up, UART_LCR, 0);
|
|
}
|
|
|
|
static void serial_omap_release_port(struct uart_port *port)
|
|
{
|
|
dev_dbg(port->dev, "serial_omap_release_port+\n");
|
|
}
|
|
|
|
static int serial_omap_request_port(struct uart_port *port)
|
|
{
|
|
dev_dbg(port->dev, "serial_omap_request_port+\n");
|
|
return 0;
|
|
}
|
|
|
|
static void serial_omap_config_port(struct uart_port *port, int flags)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_config_port+%d\n",
|
|
up->pdev->id);
|
|
up->port.type = PORT_OMAP;
|
|
}
|
|
|
|
static int
|
|
serial_omap_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
/* we don't want the core code to modify any port params */
|
|
dev_dbg(port->dev, "serial_omap_verify_port+\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const char *
|
|
serial_omap_type(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
|
|
dev_dbg(up->port.dev, "serial_omap_type+%d\n", up->pdev->id);
|
|
return up->name;
|
|
}
|
|
|
|
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
|
|
|
|
static inline void wait_for_xmitr(struct uart_omap_port *up)
|
|
{
|
|
unsigned int status, tmout = 10000;
|
|
|
|
/* Wait up to 10ms for the character(s) to be sent. */
|
|
do {
|
|
status = serial_in(up, UART_LSR);
|
|
|
|
if (status & UART_LSR_BI)
|
|
up->lsr_break_flag = UART_LSR_BI;
|
|
|
|
if (--tmout == 0)
|
|
break;
|
|
udelay(1);
|
|
} while ((status & BOTH_EMPTY) != BOTH_EMPTY);
|
|
|
|
/* Wait up to 1s for flow control if necessary */
|
|
if (up->port.flags & UPF_CONS_FLOW) {
|
|
tmout = 1000000;
|
|
for (tmout = 1000000; tmout; tmout--) {
|
|
unsigned int msr = serial_in(up, UART_MSR);
|
|
|
|
up->msr_saved_flags |= msr & MSR_SAVE_FLAGS;
|
|
if (msr & UART_MSR_CTS)
|
|
break;
|
|
|
|
udelay(1);
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
|
|
static void serial_omap_poll_put_char(struct uart_port *port, unsigned char ch)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_TX, ch);
|
|
}
|
|
|
|
static int serial_omap_poll_get_char(struct uart_port *port)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
unsigned int status = serial_in(up, UART_LSR);
|
|
|
|
if (!(status & UART_LSR_DR))
|
|
return NO_POLL_CHAR;
|
|
|
|
return serial_in(up, UART_RX);
|
|
}
|
|
|
|
#endif /* CONFIG_CONSOLE_POLL */
|
|
|
|
#ifdef CONFIG_SERIAL_OMAP_CONSOLE
|
|
|
|
static struct uart_omap_port *serial_omap_console_ports[4];
|
|
|
|
static struct uart_driver serial_omap_reg;
|
|
|
|
static void serial_omap_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)port;
|
|
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_TX, ch);
|
|
}
|
|
|
|
static void
|
|
serial_omap_console_write(struct console *co, const char *s,
|
|
unsigned int count)
|
|
{
|
|
struct uart_omap_port *up = serial_omap_console_ports[co->index];
|
|
unsigned long flags;
|
|
unsigned int ier;
|
|
int locked = 1;
|
|
|
|
local_irq_save(flags);
|
|
if (up->port.sysrq)
|
|
locked = 0;
|
|
else if (oops_in_progress)
|
|
locked = spin_trylock(&up->port.lock);
|
|
else
|
|
spin_lock(&up->port.lock);
|
|
|
|
/*
|
|
* First save the IER then disable the interrupts
|
|
*/
|
|
ier = serial_in(up, UART_IER);
|
|
serial_out(up, UART_IER, 0);
|
|
|
|
uart_console_write(&up->port, s, count, serial_omap_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the IER
|
|
*/
|
|
wait_for_xmitr(up);
|
|
serial_out(up, UART_IER, ier);
|
|
/*
|
|
* The receive handling will happen properly because the
|
|
* receive ready bit will still be set; it is not cleared
|
|
* on read. However, modem control will not, we must
|
|
* call it if we have saved something in the saved flags
|
|
* while processing with interrupts off.
|
|
*/
|
|
if (up->msr_saved_flags)
|
|
check_modem_status(up);
|
|
|
|
if (locked)
|
|
spin_unlock(&up->port.lock);
|
|
local_irq_restore(flags);
|
|
}
|
|
|
|
static int __init
|
|
serial_omap_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_omap_port *up;
|
|
int baud = 115200;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
if (serial_omap_console_ports[co->index] == NULL)
|
|
return -ENODEV;
|
|
up = serial_omap_console_ports[co->index];
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
|
|
return uart_set_options(&up->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct console serial_omap_console = {
|
|
.name = OMAP_SERIAL_NAME,
|
|
.write = serial_omap_console_write,
|
|
.device = uart_console_device,
|
|
.setup = serial_omap_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &serial_omap_reg,
|
|
};
|
|
|
|
static void serial_omap_add_console_port(struct uart_omap_port *up)
|
|
{
|
|
serial_omap_console_ports[up->pdev->id] = up;
|
|
}
|
|
|
|
#define OMAP_CONSOLE (&serial_omap_console)
|
|
|
|
#else
|
|
|
|
#define OMAP_CONSOLE NULL
|
|
|
|
static inline void serial_omap_add_console_port(struct uart_omap_port *up)
|
|
{}
|
|
|
|
#endif
|
|
|
|
static struct uart_ops serial_omap_pops = {
|
|
.tx_empty = serial_omap_tx_empty,
|
|
.set_mctrl = serial_omap_set_mctrl,
|
|
.get_mctrl = serial_omap_get_mctrl,
|
|
.stop_tx = serial_omap_stop_tx,
|
|
.start_tx = serial_omap_start_tx,
|
|
.stop_rx = serial_omap_stop_rx,
|
|
.enable_ms = serial_omap_enable_ms,
|
|
.break_ctl = serial_omap_break_ctl,
|
|
.startup = serial_omap_startup,
|
|
.shutdown = serial_omap_shutdown,
|
|
.set_termios = serial_omap_set_termios,
|
|
.pm = serial_omap_pm,
|
|
.type = serial_omap_type,
|
|
.release_port = serial_omap_release_port,
|
|
.request_port = serial_omap_request_port,
|
|
.config_port = serial_omap_config_port,
|
|
.verify_port = serial_omap_verify_port,
|
|
#ifdef CONFIG_CONSOLE_POLL
|
|
.poll_put_char = serial_omap_poll_put_char,
|
|
.poll_get_char = serial_omap_poll_get_char,
|
|
#endif
|
|
};
|
|
|
|
static struct uart_driver serial_omap_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "OMAP-SERIAL",
|
|
.dev_name = OMAP_SERIAL_NAME,
|
|
.nr = OMAP_MAX_HSUART_PORTS,
|
|
.cons = OMAP_CONSOLE,
|
|
};
|
|
|
|
static int
|
|
serial_omap_suspend(struct platform_device *pdev, pm_message_t state)
|
|
{
|
|
struct uart_omap_port *up = platform_get_drvdata(pdev);
|
|
|
|
if (up)
|
|
uart_suspend_port(&serial_omap_reg, &up->port);
|
|
return 0;
|
|
}
|
|
|
|
static int serial_omap_resume(struct platform_device *dev)
|
|
{
|
|
struct uart_omap_port *up = platform_get_drvdata(dev);
|
|
|
|
if (up)
|
|
uart_resume_port(&serial_omap_reg, &up->port);
|
|
return 0;
|
|
}
|
|
|
|
static void serial_omap_rx_timeout(unsigned long uart_no)
|
|
{
|
|
struct uart_omap_port *up = ui[uart_no];
|
|
unsigned int curr_dma_pos, curr_transmitted_size;
|
|
int ret = 0;
|
|
|
|
curr_dma_pos = omap_get_dma_dst_pos(up->uart_dma.rx_dma_channel);
|
|
if ((curr_dma_pos == up->uart_dma.prev_rx_dma_pos) ||
|
|
(curr_dma_pos == 0)) {
|
|
if (jiffies_to_msecs(jiffies - up->port_activity) <
|
|
RX_TIMEOUT) {
|
|
mod_timer(&up->uart_dma.rx_timer, jiffies +
|
|
usecs_to_jiffies(up->uart_dma.rx_timeout));
|
|
} else {
|
|
serial_omap_stop_rxdma(up);
|
|
up->ier |= (UART_IER_RDI | UART_IER_RLSI);
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
return;
|
|
}
|
|
|
|
curr_transmitted_size = curr_dma_pos -
|
|
up->uart_dma.prev_rx_dma_pos;
|
|
up->port.icount.rx += curr_transmitted_size;
|
|
tty_insert_flip_string(up->port.state->port.tty,
|
|
up->uart_dma.rx_buf +
|
|
(up->uart_dma.prev_rx_dma_pos -
|
|
up->uart_dma.rx_buf_dma_phys),
|
|
curr_transmitted_size);
|
|
tty_flip_buffer_push(up->port.state->port.tty);
|
|
up->uart_dma.prev_rx_dma_pos = curr_dma_pos;
|
|
if (up->uart_dma.rx_buf_size +
|
|
up->uart_dma.rx_buf_dma_phys == curr_dma_pos) {
|
|
ret = serial_omap_start_rxdma(up);
|
|
if (ret < 0) {
|
|
serial_omap_stop_rxdma(up);
|
|
up->ier |= (UART_IER_RDI | UART_IER_RLSI);
|
|
serial_out(up, UART_IER, up->ier);
|
|
}
|
|
} else {
|
|
mod_timer(&up->uart_dma.rx_timer, jiffies +
|
|
usecs_to_jiffies(up->uart_dma.rx_timeout));
|
|
}
|
|
up->port_activity = jiffies;
|
|
}
|
|
|
|
static void uart_rx_dma_callback(int lch, u16 ch_status, void *data)
|
|
{
|
|
return;
|
|
}
|
|
|
|
static int serial_omap_start_rxdma(struct uart_omap_port *up)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (up->uart_dma.rx_dma_channel == -1) {
|
|
ret = omap_request_dma(up->uart_dma.uart_dma_rx,
|
|
"UART Rx DMA",
|
|
(void *)uart_rx_dma_callback, up,
|
|
&(up->uart_dma.rx_dma_channel));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
omap_set_dma_src_params(up->uart_dma.rx_dma_channel, 0,
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
up->uart_dma.uart_base, 0, 0);
|
|
omap_set_dma_dest_params(up->uart_dma.rx_dma_channel, 0,
|
|
OMAP_DMA_AMODE_POST_INC,
|
|
up->uart_dma.rx_buf_dma_phys, 0, 0);
|
|
omap_set_dma_transfer_params(up->uart_dma.rx_dma_channel,
|
|
OMAP_DMA_DATA_TYPE_S8,
|
|
up->uart_dma.rx_buf_size, 1,
|
|
OMAP_DMA_SYNC_ELEMENT,
|
|
up->uart_dma.uart_dma_rx, 0);
|
|
}
|
|
up->uart_dma.prev_rx_dma_pos = up->uart_dma.rx_buf_dma_phys;
|
|
/* FIXME: Cache maintenance needed here? */
|
|
omap_start_dma(up->uart_dma.rx_dma_channel);
|
|
mod_timer(&up->uart_dma.rx_timer, jiffies +
|
|
usecs_to_jiffies(up->uart_dma.rx_timeout));
|
|
up->uart_dma.rx_dma_used = true;
|
|
return ret;
|
|
}
|
|
|
|
static void serial_omap_continue_tx(struct uart_omap_port *up)
|
|
{
|
|
struct circ_buf *xmit = &up->port.state->xmit;
|
|
unsigned int start = up->uart_dma.tx_buf_dma_phys
|
|
+ (xmit->tail & (UART_XMIT_SIZE - 1));
|
|
|
|
if (uart_circ_empty(xmit))
|
|
return;
|
|
|
|
up->uart_dma.tx_buf_size = uart_circ_chars_pending(xmit);
|
|
/*
|
|
* It is a circular buffer. See if the buffer has wounded back.
|
|
* If yes it will have to be transferred in two separate dma
|
|
* transfers
|
|
*/
|
|
if (start + up->uart_dma.tx_buf_size >=
|
|
up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE)
|
|
up->uart_dma.tx_buf_size =
|
|
(up->uart_dma.tx_buf_dma_phys + UART_XMIT_SIZE) - start;
|
|
omap_set_dma_dest_params(up->uart_dma.tx_dma_channel, 0,
|
|
OMAP_DMA_AMODE_CONSTANT,
|
|
up->uart_dma.uart_base, 0, 0);
|
|
omap_set_dma_src_params(up->uart_dma.tx_dma_channel, 0,
|
|
OMAP_DMA_AMODE_POST_INC, start, 0, 0);
|
|
omap_set_dma_transfer_params(up->uart_dma.tx_dma_channel,
|
|
OMAP_DMA_DATA_TYPE_S8,
|
|
up->uart_dma.tx_buf_size, 1,
|
|
OMAP_DMA_SYNC_ELEMENT,
|
|
up->uart_dma.uart_dma_tx, 0);
|
|
/* FIXME: Cache maintenance needed here? */
|
|
omap_start_dma(up->uart_dma.tx_dma_channel);
|
|
}
|
|
|
|
static void uart_tx_dma_callback(int lch, u16 ch_status, void *data)
|
|
{
|
|
struct uart_omap_port *up = (struct uart_omap_port *)data;
|
|
struct circ_buf *xmit = &up->port.state->xmit;
|
|
|
|
xmit->tail = (xmit->tail + up->uart_dma.tx_buf_size) & \
|
|
(UART_XMIT_SIZE - 1);
|
|
up->port.icount.tx += up->uart_dma.tx_buf_size;
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&up->port);
|
|
|
|
if (uart_circ_empty(xmit)) {
|
|
spin_lock(&(up->uart_dma.tx_lock));
|
|
serial_omap_stop_tx(&up->port);
|
|
up->uart_dma.tx_dma_used = false;
|
|
spin_unlock(&(up->uart_dma.tx_lock));
|
|
} else {
|
|
omap_stop_dma(up->uart_dma.tx_dma_channel);
|
|
serial_omap_continue_tx(up);
|
|
}
|
|
up->port_activity = jiffies;
|
|
return;
|
|
}
|
|
|
|
static int serial_omap_probe(struct platform_device *pdev)
|
|
{
|
|
struct uart_omap_port *up;
|
|
struct resource *mem, *irq, *dma_tx, *dma_rx;
|
|
struct omap_uart_port_info *omap_up_info = pdev->dev.platform_data;
|
|
int ret = -ENOSPC;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!mem) {
|
|
dev_err(&pdev->dev, "no mem resource?\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!irq) {
|
|
dev_err(&pdev->dev, "no irq resource?\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (!request_mem_region(mem->start, (mem->end - mem->start) + 1,
|
|
pdev->dev.driver->name)) {
|
|
dev_err(&pdev->dev, "memory region already claimed\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
|
|
if (!dma_rx) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
|
|
if (!dma_tx) {
|
|
ret = -EINVAL;
|
|
goto err;
|
|
}
|
|
|
|
up = kzalloc(sizeof(*up), GFP_KERNEL);
|
|
if (up == NULL) {
|
|
ret = -ENOMEM;
|
|
goto do_release_region;
|
|
}
|
|
sprintf(up->name, "OMAP UART%d", pdev->id);
|
|
up->pdev = pdev;
|
|
up->port.dev = &pdev->dev;
|
|
up->port.type = PORT_OMAP;
|
|
up->port.iotype = UPIO_MEM;
|
|
up->port.irq = irq->start;
|
|
|
|
up->port.regshift = 2;
|
|
up->port.fifosize = 64;
|
|
up->port.ops = &serial_omap_pops;
|
|
up->port.line = pdev->id;
|
|
|
|
up->port.membase = omap_up_info->membase;
|
|
up->port.mapbase = omap_up_info->mapbase;
|
|
up->port.flags = omap_up_info->flags;
|
|
up->port.irqflags = omap_up_info->irqflags;
|
|
up->port.uartclk = omap_up_info->uartclk;
|
|
up->uart_dma.uart_base = mem->start;
|
|
|
|
if (omap_up_info->dma_enabled) {
|
|
up->uart_dma.uart_dma_tx = dma_tx->start;
|
|
up->uart_dma.uart_dma_rx = dma_rx->start;
|
|
up->use_dma = 1;
|
|
up->uart_dma.rx_buf_size = 4096;
|
|
up->uart_dma.rx_timeout = 2;
|
|
spin_lock_init(&(up->uart_dma.tx_lock));
|
|
spin_lock_init(&(up->uart_dma.rx_lock));
|
|
up->uart_dma.tx_dma_channel = OMAP_UART_DMA_CH_FREE;
|
|
up->uart_dma.rx_dma_channel = OMAP_UART_DMA_CH_FREE;
|
|
}
|
|
|
|
ui[pdev->id] = up;
|
|
serial_omap_add_console_port(up);
|
|
|
|
ret = uart_add_one_port(&serial_omap_reg, &up->port);
|
|
if (ret != 0)
|
|
goto do_release_region;
|
|
|
|
platform_set_drvdata(pdev, up);
|
|
return 0;
|
|
err:
|
|
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
|
|
pdev->id, __func__, ret);
|
|
do_release_region:
|
|
release_mem_region(mem->start, (mem->end - mem->start) + 1);
|
|
return ret;
|
|
}
|
|
|
|
static int serial_omap_remove(struct platform_device *dev)
|
|
{
|
|
struct uart_omap_port *up = platform_get_drvdata(dev);
|
|
|
|
platform_set_drvdata(dev, NULL);
|
|
if (up) {
|
|
uart_remove_one_port(&serial_omap_reg, &up->port);
|
|
kfree(up);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver serial_omap_driver = {
|
|
.probe = serial_omap_probe,
|
|
.remove = serial_omap_remove,
|
|
|
|
.suspend = serial_omap_suspend,
|
|
.resume = serial_omap_resume,
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
},
|
|
};
|
|
|
|
static int __init serial_omap_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = uart_register_driver(&serial_omap_reg);
|
|
if (ret != 0)
|
|
return ret;
|
|
ret = platform_driver_register(&serial_omap_driver);
|
|
if (ret != 0)
|
|
uart_unregister_driver(&serial_omap_reg);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit serial_omap_exit(void)
|
|
{
|
|
platform_driver_unregister(&serial_omap_driver);
|
|
uart_unregister_driver(&serial_omap_reg);
|
|
}
|
|
|
|
module_init(serial_omap_init);
|
|
module_exit(serial_omap_exit);
|
|
|
|
MODULE_DESCRIPTION("OMAP High Speed UART driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Texas Instruments Inc");
|