When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.
arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.
For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:
0xffffffff816cb5e9 <+9>: push %r12
0xffffffff816cb5eb <+11>: xor %r12d,%r12d
0xffffffff816cb5ee <+14>: test %rdi,%rdi
0xffffffff816cb5f1 <+17>: setne %r12b
0xffffffff816cb5f5 <+21>: push %rbp
1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
After the optimization, "func" code changes to:
0xffffffff816cc079 <+9>: push %r12
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
Now op1->flags == KPROBE_FLAG_OPTIMATED;
2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.
register_kprobe(kp2)
register_aggr_kprobe
alloc_aggr_kprobe
__prepare_optimized_kprobe
arch_prepare_optimized_kprobe
__recover_optprobed_insn // copy original bytes from kp1->optinsn.copied_insn,
// jump address = <func+14>
3. disable kp1:
disable_kprobe(kp1)
__disable_kprobe
...
if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
ret = disarm_kprobe(orig_p, true) // add op1 in unoptimizing_list, not unoptimized
orig_p->flags |= KPROBE_FLAG_DISABLED; // op1->flags == KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
...
4. unregister kp2
__unregister_kprobe_top
...
if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
optimize_kprobe(op)
...
if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
return;
p->kp.flags |= KPROBE_FLAG_OPTIMIZED; // now op2 has KPROBE_FLAG_OPTIMIZED
}
"func" code now is:
0xffffffff816cc079 <+9>: int3
0xffffffff816cc07a <+10>: push %rsp
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
5. if call "func", int3 handler call setup_detour_execution:
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
...
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
...
}
The code for the destination address is
0xffffffffa021072c: push %r12
0xffffffffa021072e: xor %r12d,%r12d
0xffffffffa0210731: jmp 0xffffffff816cb5ee <func+14>
However, <func+14> is not a valid start instruction address. As a result, an error occurs.
Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cc ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
f1c97a1b4e