mirrors/linux-stable
1
0
Fork 0
mirror of https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git synced 2024-08-22 17:01:14 +00:00
Code Issues Releases Wiki Activity
linux-stable/tools/power/cpupower/po/cs.po
Dominik Brodowski 7fe2f6399a cpupowerutils - cpufrequtils extended with quite some features 
CPU power consumption vs performance tuning is no longer
limited to CPU frequency switching anymore: deep sleep states,
traditional dynamic frequency scaling and hidden turbo/boost
frequencies are tied close together and depend on each other.
The first two exist on different architectures like PPC, Itanium and
ARM, the latter (so far) only on X86. On X86 the APU (CPU+GPU) will
only run most efficiently if CPU and GPU has proper power management
in place.

Users and Developers want to have *one* tool to get an overview what
their system supports and to monitor and debug CPU power management
in detail. The tool should compile and work on as many architectures
as possible.

Once this tool stabilizes a bit, it is intended to replace the
Intel-specific tools in tools/power/x86

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-07-29 18:35:36 +02:00

944 lines
24 KiB
Text
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# translation of cs.po to Czech
# Czech translation for cpufrequtils package
# Czech messages for cpufrequtils.
# Copyright (C) 2007 kavol
# This file is distributed under the same license as the cpufrequtils package.
#
# Karel Volný <kavol@seznam.cz>, 2007, 2008.
msgid ""
msgstr ""
"Project-Id-Version: cs\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2011-03-08 17:03+0100\n"
"PO-Revision-Date: 2008-06-11 16:26+0200\n"
"Last-Translator: Karel Volný <kavol@seznam.cz>\n"
"Language-Team: Czech <diskuze@lists.l10n.cz>\n"
"Language: cs\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
"X-Generator: KBabel 1.11.4\n"
#: utils/idle_monitor/nhm_idle.c:36
msgid "Processor Core C3"
msgstr ""
#: utils/idle_monitor/nhm_idle.c:43
msgid "Processor Core C6"
msgstr ""
#: utils/idle_monitor/nhm_idle.c:51
msgid "Processor Package C3"
msgstr ""
#: utils/idle_monitor/nhm_idle.c:58 utils/idle_monitor/amd_fam14h_idle.c:70
msgid "Processor Package C6"
msgstr ""
#: utils/idle_monitor/snb_idle.c:33
msgid "Processor Core C7"
msgstr ""
#: utils/idle_monitor/snb_idle.c:40
msgid "Processor Package C2"
msgstr ""
#: utils/idle_monitor/snb_idle.c:47
msgid "Processor Package C7"
msgstr ""
#: utils/idle_monitor/amd_fam14h_idle.c:56
msgid "Package in sleep state (PC1 or deeper)"
msgstr ""
#: utils/idle_monitor/amd_fam14h_idle.c:63
msgid "Processor Package C1"
msgstr ""
#: utils/idle_monitor/amd_fam14h_idle.c:77
msgid "North Bridge P1 boolean counter (returns 0 or 1)"
msgstr ""
#: utils/idle_monitor/mperf_monitor.c:35
msgid "Processor Core not idle"
msgstr ""
#: utils/idle_monitor/mperf_monitor.c:42
msgid "Processor Core in an idle state"
msgstr ""
#: utils/idle_monitor/mperf_monitor.c:50
msgid "Average Frequency (including boost) in MHz"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:66
#, c-format
msgid ""
"cpupower monitor: [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:69
#, c-format
msgid ""
"cpupower monitor: [-v] [-h] [ [-t] | [-l] | [-m <mon1>,[<mon2>] ] ] [-i "
"interval_sec | -c command ...]\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:71
#, c-format
msgid "\t -v: be more verbose\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:73
#, c-format
msgid "\t -h: print this help\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:74
#, c-format
msgid "\t -i: time intervall to measure for in seconds (default 1)\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:75
#, c-format
msgid "\t -t: show CPU topology/hierarchy\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:76
#, c-format
msgid "\t -l: list available CPU sleep monitors (for use with -m)\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:77
#, c-format
msgid "\t -m: show specific CPU sleep monitors only (in same order)\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:79
#, c-format
msgid ""
"only one of: -t, -l, -m are allowed\n"
"If none of them is passed,"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:80
#, c-format
msgid " all supported monitors are shown\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:197
#, c-format
msgid "Monitor %s, Counter %s has no count function. Implementation error\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:207
#, c-format
msgid " *is offline\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:236
#, c-format
msgid "%s: max monitor name length (%d) exceeded\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:250
#, c-format
msgid "No matching monitor found in %s, try -l option\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:266
#, c-format
msgid "Monitor \"%s\" (%d states) - Might overflow after %u s\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:319
#, c-format
msgid "%s took %.5f seconds and exited with status %d\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:406
#, c-format
msgid "Cannot read number of available processors\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:417
#, c-format
msgid "Available monitor %s needs root access\n"
msgstr ""
#: utils/idle_monitor/cpupower-monitor.c:428
#, c-format
msgid "No HW Cstate monitors found\n"
msgstr ""
#: utils/cpupower.c:78
#, c-format
msgid "cpupower [ -c cpulist ] subcommand [ARGS]\n"
msgstr ""
#: utils/cpupower.c:79
#, c-format
msgid "cpupower --version\n"
msgstr ""
#: utils/cpupower.c:80
#, c-format
msgid "Supported subcommands are:\n"
msgstr ""
#: utils/cpupower.c:83
#, c-format
msgid ""
"\n"
"Some subcommands can make use of the -c cpulist option.\n"
msgstr ""
#: utils/cpupower.c:84
#, c-format
msgid "Look at the general cpupower manpage how to use it\n"
msgstr ""
#: utils/cpupower.c:85
#, c-format
msgid "and read up the subcommand's manpage whether it is supported.\n"
msgstr ""
#: utils/cpupower.c:86
#, c-format
msgid ""
"\n"
"Use cpupower help subcommand for getting help for above subcommands.\n"
msgstr ""
#: utils/cpupower.c:91
#, c-format
msgid "Report errors and bugs to %s, please.\n"
msgstr ""
"Chyby v programu prosím hlaste na %s (anglicky).\n"
"Chyby v překladu prosím hlaste na kavol@seznam.cz (česky ;-)\n"
#: utils/cpupower.c:114
#, c-format
msgid "Error parsing cpu list\n"
msgstr ""
#: utils/cpupower.c:172
#, c-format
msgid "Subcommand %s needs root privileges\n"
msgstr ""
#: utils/cpufreq-info.c:31
#, c-format
msgid "Couldn't count the number of CPUs (%s: %s), assuming 1\n"
msgstr "Nelze zjistit počet CPU (%s: %s), předpokládá se 1.\n"
#: utils/cpufreq-info.c:63
#, c-format
msgid ""
" minimum CPU frequency - maximum CPU frequency - governor\n"
msgstr ""
" minimální frekvence CPU - maximální frekvence CPU - regulátor\n"
#: utils/cpufreq-info.c:151
#, c-format
msgid "Error while evaluating Boost Capabilities on CPU %d -- are you root?\n"
msgstr ""
#. P state changes via MSR are identified via cpuid 80000007
#. on Intel and AMD, but we assume boost capable machines can do that
#. if (cpuid_eax(0x80000000) >= 0x80000007
#. && (cpuid_edx(0x80000007) & (1 << 7)))
#.
#: utils/cpufreq-info.c:161
#, c-format
msgid " boost state support: \n"
msgstr ""
#: utils/cpufreq-info.c:163
#, c-format
msgid " Supported: %s\n"
msgstr ""
#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "yes"
msgstr ""
#: utils/cpufreq-info.c:163 utils/cpufreq-info.c:164
msgid "no"
msgstr ""
#: utils/cpufreq-info.c:164
#, fuzzy, c-format
msgid " Active: %s\n"
msgstr " ovladač: %s\n"
#: utils/cpufreq-info.c:177
#, c-format
msgid " Boost States: %d\n"
msgstr ""
#: utils/cpufreq-info.c:178
#, c-format
msgid " Total States: %d\n"
msgstr ""
#: utils/cpufreq-info.c:181
#, c-format
msgid " Pstate-Pb%d: %luMHz (boost state)\n"
msgstr ""
#: utils/cpufreq-info.c:184
#, c-format
msgid " Pstate-P%d: %luMHz\n"
msgstr ""
#: utils/cpufreq-info.c:211
#, c-format
msgid " no or unknown cpufreq driver is active on this CPU\n"
msgstr " pro tento CPU není aktivní žádný známý ovladač cpufreq\n"
#: utils/cpufreq-info.c:213
#, c-format
msgid " driver: %s\n"
msgstr " ovladač: %s\n"
#: utils/cpufreq-info.c:219
#, fuzzy, c-format
msgid " CPUs which run at the same hardware frequency: "
msgstr " CPU, které musí měnit frekvenci zároveň: "
#: utils/cpufreq-info.c:230
#, fuzzy, c-format
msgid " CPUs which need to have their frequency coordinated by software: "
msgstr " CPU, které musí měnit frekvenci zároveň: "
#: utils/cpufreq-info.c:241
#, c-format
msgid " maximum transition latency: "
msgstr ""
#: utils/cpufreq-info.c:247
#, c-format
msgid " hardware limits: "
msgstr " hardwarové meze: "
#: utils/cpufreq-info.c:256
#, c-format
msgid " available frequency steps: "
msgstr " dostupné frekvence: "
#: utils/cpufreq-info.c:269
#, c-format
msgid " available cpufreq governors: "
msgstr " dostupné regulátory: "
#: utils/cpufreq-info.c:280
#, c-format
msgid " current policy: frequency should be within "
msgstr " současná taktika: frekvence by měla být mezi "
#: utils/cpufreq-info.c:282
#, c-format
msgid " and "
msgstr " a "
#: utils/cpufreq-info.c:286
#, c-format
msgid ""
"The governor \"%s\" may decide which speed to use\n"
" within this range.\n"
msgstr ""
" Regulátor \"%s\" může rozhodnout jakou frekvenci použít\n"
" v těchto mezích.\n"
#: utils/cpufreq-info.c:293
#, c-format
msgid " current CPU frequency is "
msgstr " současná frekvence CPU je "
#: utils/cpufreq-info.c:296
#, c-format
msgid " (asserted by call to hardware)"
msgstr " (zjištěno hardwarovým voláním)"
#: utils/cpufreq-info.c:304
#, c-format
msgid " cpufreq stats: "
msgstr " statistika cpufreq: "
#: utils/cpufreq-info.c:472
#, fuzzy, c-format
msgid "Usage: cpupower freqinfo [options]\n"
msgstr "Užití: cpufreq-info [přepínače]\n"
#: utils/cpufreq-info.c:473 utils/cpufreq-set.c:26 utils/cpupower-set.c:23
#: utils/cpupower-info.c:22 utils/cpuidle-info.c:148
#, c-format
msgid "Options:\n"
msgstr "Přepínače:\n"
#: utils/cpufreq-info.c:474
#, fuzzy, c-format
msgid " -e, --debug Prints out debug information [default]\n"
msgstr " -e, --debug Vypíše ladicí informace\n"
#: utils/cpufreq-info.c:475
#, c-format
msgid ""
" -f, --freq Get frequency the CPU currently runs at, according\n"
" to the cpufreq core *\n"
msgstr ""
" -f, --freq Zjistí aktuální frekvenci, na které CPU běží\n"
" podle cpufreq *\n"
#: utils/cpufreq-info.c:477
#, c-format
msgid ""
" -w, --hwfreq Get frequency the CPU currently runs at, by reading\n"
" it from hardware (only available to root) *\n"
msgstr ""
" -w, --hwfreq Zjistí aktuální frekvenci, na které CPU běží\n"
" z hardware (dostupné jen uživateli root) *\n"
#: utils/cpufreq-info.c:479
#, c-format
msgid ""
" -l, --hwlimits Determine the minimum and maximum CPU frequency "
"allowed *\n"
msgstr ""
" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU "
"*\n"
#: utils/cpufreq-info.c:480
#, c-format
msgid " -d, --driver Determines the used cpufreq kernel driver *\n"
msgstr " -d, --driver Zjistí aktivní ovladač cpufreq *\n"
#: utils/cpufreq-info.c:481
#, c-format
msgid " -p, --policy Gets the currently used cpufreq policy *\n"
msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n"
#: utils/cpufreq-info.c:482
#, c-format
msgid " -g, --governors Determines available cpufreq governors *\n"
msgstr " -g, --governors Zjistí dostupné regulátory cpufreq *\n"
#: utils/cpufreq-info.c:483
#, fuzzy, c-format
msgid ""
" -r, --related-cpus Determines which CPUs run at the same hardware "
"frequency *\n"
msgstr ""
" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n"
#: utils/cpufreq-info.c:484
#, fuzzy, c-format
msgid ""
" -a, --affected-cpus Determines which CPUs need to have their frequency\n"
" coordinated by software *\n"
msgstr ""
" -a, --affected-cpus Zjistí, které CPU musí měnit frekvenci zároveň *\n"
#: utils/cpufreq-info.c:486
#, c-format
msgid " -s, --stats Shows cpufreq statistics if available\n"
msgstr " -s, --stats Zobrazí statistiku cpufreq, je-li dostupná\n"
#: utils/cpufreq-info.c:487
#, fuzzy, c-format
msgid ""
" -y, --latency Determines the maximum latency on CPU frequency "
"changes *\n"
msgstr ""
" -l, --hwlimits Zjistí minimální a maximální dostupnou frekvenci CPU "
"*\n"
#: utils/cpufreq-info.c:488
#, c-format
msgid " -b, --boost Checks for turbo or boost modes *\n"
msgstr ""
#: utils/cpufreq-info.c:489
#, c-format
msgid ""
" -o, --proc Prints out information like provided by the /proc/"
"cpufreq\n"
" interface in 2.4. and early 2.6. kernels\n"
msgstr ""
" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n"
" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"
#: utils/cpufreq-info.c:491
#, fuzzy, c-format
msgid ""
" -m, --human human-readable output for the -f, -w, -s and -y "
"parameters\n"
msgstr ""
" -m, --human Výstup parametrů -f, -w a -s v „lidmi čitelném“ "
"formátu\n"
#: utils/cpufreq-info.c:492 utils/cpuidle-info.c:152
#, c-format
msgid " -h, --help Prints out this screen\n"
msgstr " -h, --help Vypíše tuto nápovědu\n"
#: utils/cpufreq-info.c:495
#, c-format
msgid ""
"If no argument or only the -c, --cpu parameter is given, debug output about\n"
"cpufreq is printed which is useful e.g. for reporting bugs.\n"
msgstr ""
"Není-li zadán žádný parametr nebo je-li zadán pouze přepínač -c, --cpu, "
"jsou\n"
"vypsány ladicí informace, což může být užitečné například při hlášení chyb.\n"
#: utils/cpufreq-info.c:497
#, c-format
msgid ""
"For the arguments marked with *, omitting the -c or --cpu argument is\n"
"equivalent to setting it to zero\n"
msgstr ""
"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n"
"předpokládá se jeho hodnota 0.\n"
#: utils/cpufreq-info.c:580
#, c-format
msgid ""
"The argument passed to this tool can't be combined with passing a --cpu "
"argument\n"
msgstr "Zadaný parametr nemůže být použit zároveň s přepínačem -c nebo --cpu\n"
#: utils/cpufreq-info.c:596
#, c-format
msgid ""
"You can't specify more than one --cpu parameter and/or\n"
"more than one output-specific argument\n"
msgstr ""
"Nelze zadat více než jeden parametr -c nebo --cpu\n"
"anebo více než jeden parametr určující výstup\n"
#: utils/cpufreq-info.c:600 utils/cpufreq-set.c:82 utils/cpupower-set.c:42
#: utils/cpupower-info.c:42 utils/cpuidle-info.c:213
#, c-format
msgid "invalid or unknown argument\n"
msgstr "neplatný nebo neznámý parametr\n"
#: utils/cpufreq-info.c:617
#, c-format
msgid "couldn't analyze CPU %d as it doesn't seem to be present\n"
msgstr "nelze analyzovat CPU %d, vypadá to, že není přítomen\n"
#: utils/cpufreq-info.c:620 utils/cpupower-info.c:142
#, c-format
msgid "analyzing CPU %d:\n"
msgstr "analyzuji CPU %d:\n"
#: utils/cpufreq-set.c:25
#, fuzzy, c-format
msgid "Usage: cpupower frequency-set [options]\n"
msgstr "Užití: cpufreq-set [přepínače]\n"
#: utils/cpufreq-set.c:27
#, c-format
msgid ""
" -d FREQ, --min FREQ new minimum CPU frequency the governor may "
"select\n"
msgstr ""
" -d FREQ, --min FREQ Nová nejnižší frekvence, kterou může regulátor "
"vybrat\n"
#: utils/cpufreq-set.c:28
#, c-format
msgid ""
" -u FREQ, --max FREQ new maximum CPU frequency the governor may "
"select\n"
msgstr ""
" -u FREQ, --max FREQ Nová nejvyšší frekvence, kterou může regulátor "
"zvolit\n"
#: utils/cpufreq-set.c:29
#, c-format
msgid " -g GOV, --governor GOV new cpufreq governor\n"
msgstr " -g GOV, --governors GOV Nový regulátor cpufreq\n"
#: utils/cpufreq-set.c:30
#, c-format
msgid ""
" -f FREQ, --freq FREQ specific frequency to be set. Requires userspace\n"
" governor to be available and loaded\n"
msgstr ""
" -f FREQ, --freq FREQ Frekvence, která má být nastavena. Vyžaduje, aby "
"byl\n"
" v jádře nahrán regulátor ‚userspace‘.\n"
#: utils/cpufreq-set.c:32
#, c-format
msgid " -r, --related Switches all hardware-related CPUs\n"
msgstr ""
#: utils/cpufreq-set.c:33 utils/cpupower-set.c:28 utils/cpupower-info.c:27
#, fuzzy, c-format
msgid " -h, --help Prints out this screen\n"
msgstr " -h, --help Vypíše tuto nápovědu\n"
#: utils/cpufreq-set.c:35
#, fuzzy, c-format
msgid ""
"Notes:\n"
"1. Omitting the -c or --cpu argument is equivalent to setting it to \"all\"\n"
msgstr ""
"Není-li při použití přepínačů označených * zadán parametr -c nebo --cpu,\n"
"předpokládá se jeho hodnota 0.\n"
#: utils/cpufreq-set.c:37
#, fuzzy, c-format
msgid ""
"2. The -f FREQ, --freq FREQ parameter cannot be combined with any other "
"parameter\n"
" except the -c CPU, --cpu CPU parameter\n"
"3. FREQuencies can be passed in Hz, kHz (default), MHz, GHz, or THz\n"
" by postfixing the value with the wanted unit name, without any space\n"
" (FREQuency in kHz =^ Hz * 0.001 =^ MHz * 1000 =^ GHz * 1000000).\n"
msgstr ""
"Poznámky:\n"
"1. Vynechání parametru -c nebo --cpu je ekvivalentní jeho nastavení na 0\n"
"2. Přepínač -f nebo --freq nemůže být použit zároveň s žádným jiným vyjma -"
"c\n"
" nebo --cpu\n"
"3. Frekvence (FREQ) mohou být zadány v Hz, kHz (výchozí), MHz, GHz nebo THz\n"
" připojením názvu jednotky bez mezery mezi číslem a jednotkou\n"
" (FREQ v kHz =^ Hz * 0,001 = ^ MHz * 1000 =^ GHz * 1000000)\n"
#: utils/cpufreq-set.c:57
#, c-format
msgid ""
"Error setting new values. Common errors:\n"
"- Do you have proper administration rights? (super-user?)\n"
"- Is the governor you requested available and modprobed?\n"
"- Trying to set an invalid policy?\n"
"- Trying to set a specific frequency, but userspace governor is not "
"available,\n"
" for example because of hardware which cannot be set to a specific "
"frequency\n"
" or because the userspace governor isn't loaded?\n"
msgstr ""
"Chyba při nastavování nových hodnot. Obvyklé problémy:\n"
"- Máte patřičná administrátorská práva? (root?)\n"
"- Je požadovaný regulátor dostupný v jádře? (modprobe?)\n"
"- Snažíte se nastavit neplatnou taktiku?\n"
"- Snažíte se nastavit určitou frekvenci, ale není dostupný\n"
" regulátor ‚userspace‘, například protože není nahrán v jádře,\n"
" nebo nelze na tomto hardware nastavit určitou frekvenci?\n"
#: utils/cpufreq-set.c:170
#, c-format
msgid "wrong, unknown or unhandled CPU?\n"
msgstr "neznámý nebo nepodporovaný CPU?\n"
#: utils/cpufreq-set.c:302
#, c-format
msgid ""
"the -f/--freq parameter cannot be combined with -d/--min, -u/--max or\n"
"-g/--governor parameters\n"
msgstr ""
"přepínač -f/--freq nemůže být použit zároveň\n"
"s přepínačem -d/--min, -u/--max nebo -g/--governor\n"
#: utils/cpufreq-set.c:308
#, c-format
msgid ""
"At least one parameter out of -f/--freq, -d/--min, -u/--max, and\n"
"-g/--governor must be passed\n"
msgstr ""
"Musí být zadán alespoň jeden přepínač\n"
"-f/--freq, -d/--min, -u/--max nebo -g/--governor\n"
#: utils/cpufreq-set.c:347
#, c-format
msgid "Setting cpu: %d\n"
msgstr ""
#: utils/cpupower-set.c:22
#, c-format
msgid "Usage: cpupower set [ -b val ] [ -m val ] [ -s val ]\n"
msgstr ""
#: utils/cpupower-set.c:24
#, c-format
msgid ""
" -b, --perf-bias [VAL] Sets CPU's power vs performance policy on some\n"
" Intel models [0-15], see manpage for details\n"
msgstr ""
#: utils/cpupower-set.c:26
#, c-format
msgid ""
" -m, --sched-mc [VAL] Sets the kernel's multi core scheduler policy.\n"
msgstr ""
#: utils/cpupower-set.c:27
#, c-format
msgid ""
" -s, --sched-smt [VAL] Sets the kernel's thread sibling scheduler "
"policy.\n"
msgstr ""
#: utils/cpupower-set.c:80
#, c-format
msgid "--perf-bias param out of range [0-%d]\n"
msgstr ""
#: utils/cpupower-set.c:91
#, c-format
msgid "--sched-mc param out of range [0-%d]\n"
msgstr ""
#: utils/cpupower-set.c:102
#, c-format
msgid "--sched-smt param out of range [0-%d]\n"
msgstr ""
#: utils/cpupower-set.c:121
#, c-format
msgid "Error setting sched-mc %s\n"
msgstr ""
#: utils/cpupower-set.c:127
#, c-format
msgid "Error setting sched-smt %s\n"
msgstr ""
#: utils/cpupower-set.c:146
#, c-format
msgid "Error setting perf-bias value on CPU %d\n"
msgstr ""
#: utils/cpupower-info.c:21
#, c-format
msgid "Usage: cpupower info [ -b ] [ -m ] [ -s ]\n"
msgstr ""
#: utils/cpupower-info.c:23
#, c-format
msgid ""
" -b, --perf-bias Gets CPU's power vs performance policy on some\n"
" Intel models [0-15], see manpage for details\n"
msgstr ""
#: utils/cpupower-info.c:25
#, fuzzy, c-format
msgid " -m, --sched-mc Gets the kernel's multi core scheduler policy.\n"
msgstr " -p, --policy Zjistí aktuální taktiku cpufreq *\n"
#: utils/cpupower-info.c:26
#, c-format
msgid ""
" -s, --sched-smt Gets the kernel's thread sibling scheduler policy.\n"
msgstr ""
#: utils/cpupower-info.c:28
#, c-format
msgid ""
"\n"
"Passing no option will show all info, by default only on core 0\n"
msgstr ""
#: utils/cpupower-info.c:102
#, c-format
msgid "System's multi core scheduler setting: "
msgstr ""
#. if sysfs file is missing it's: errno == ENOENT
#: utils/cpupower-info.c:105 utils/cpupower-info.c:114
#, c-format
msgid "not supported\n"
msgstr ""
#: utils/cpupower-info.c:111
#, c-format
msgid "System's thread sibling scheduler setting: "
msgstr ""
#: utils/cpupower-info.c:126
#, c-format
msgid "Intel's performance bias setting needs root privileges\n"
msgstr ""
#: utils/cpupower-info.c:128
#, c-format
msgid "System does not support Intel's performance bias setting\n"
msgstr ""
#: utils/cpupower-info.c:147
#, c-format
msgid "Could not read perf-bias value\n"
msgstr ""
#: utils/cpupower-info.c:150
#, c-format
msgid "perf-bias: %d\n"
msgstr ""
#: utils/cpuidle-info.c:28
#, fuzzy, c-format
msgid "Analyzing CPU %d:\n"
msgstr "analyzuji CPU %d:\n"
#: utils/cpuidle-info.c:32
#, c-format
msgid "CPU %u: No idle states\n"
msgstr ""
#: utils/cpuidle-info.c:36
#, c-format
msgid "CPU %u: Can't read idle state info\n"
msgstr ""
#: utils/cpuidle-info.c:41
#, c-format
msgid "Could not determine max idle state %u\n"
msgstr ""
#: utils/cpuidle-info.c:46
#, c-format
msgid "Number of idle states: %d\n"
msgstr ""
#: utils/cpuidle-info.c:48
#, fuzzy, c-format
msgid "Available idle states:"
msgstr " dostupné frekvence: "
#: utils/cpuidle-info.c:71
#, c-format
msgid "Flags/Description: %s\n"
msgstr ""
#: utils/cpuidle-info.c:74
#, c-format
msgid "Latency: %lu\n"
msgstr ""
#: utils/cpuidle-info.c:76
#, c-format
msgid "Usage: %lu\n"
msgstr ""
#: utils/cpuidle-info.c:78
#, c-format
msgid "Duration: %llu\n"
msgstr ""
#: utils/cpuidle-info.c:90
#, c-format
msgid "Could not determine cpuidle driver\n"
msgstr ""
#: utils/cpuidle-info.c:94
#, fuzzy, c-format
msgid "CPUidle driver: %s\n"
msgstr " ovladač: %s\n"
#: utils/cpuidle-info.c:99
#, c-format
msgid "Could not determine cpuidle governor\n"
msgstr ""
#: utils/cpuidle-info.c:103
#, c-format
msgid "CPUidle governor: %s\n"
msgstr ""
#: utils/cpuidle-info.c:122
#, c-format
msgid "CPU %u: Can't read C-state info\n"
msgstr ""
#. printf("Cstates: %d\n", cstates);
#: utils/cpuidle-info.c:127
#, c-format
msgid "active state: C0\n"
msgstr ""
#: utils/cpuidle-info.c:128
#, c-format
msgid "max_cstate: C%u\n"
msgstr ""
#: utils/cpuidle-info.c:129
#, c-format
msgid "maximum allowed latency: %lu usec\n"
msgstr ""
#: utils/cpuidle-info.c:130
#, c-format
msgid "states:\t\n"
msgstr ""
#: utils/cpuidle-info.c:132
#, c-format
msgid " C%d: type[C%d] "
msgstr ""
#: utils/cpuidle-info.c:134
#, c-format
msgid "promotion[--] demotion[--] "
msgstr ""
#: utils/cpuidle-info.c:135
#, c-format
msgid "latency[%03lu] "
msgstr ""
#: utils/cpuidle-info.c:137
#, c-format
msgid "usage[%08lu] "
msgstr ""
#: utils/cpuidle-info.c:139
#, c-format
msgid "duration[%020Lu] \n"
msgstr ""
#: utils/cpuidle-info.c:147
#, fuzzy, c-format
msgid "Usage: cpupower idleinfo [options]\n"
msgstr "Užití: cpufreq-info [přepínače]\n"
#: utils/cpuidle-info.c:149
#, fuzzy, c-format
msgid " -s, --silent Only show general C-state information\n"
msgstr " -e, --debug Vypíše ladicí informace\n"
#: utils/cpuidle-info.c:150
#, fuzzy, c-format
msgid ""
" -o, --proc Prints out information like provided by the /proc/"
"acpi/processor/*/power\n"
" interface in older kernels\n"
msgstr ""
" -o, --proc Vypíše informace ve formátu, jaký používalo rozhraní\n"
" /proc/cpufreq v kernelech řady 2.4 a časné 2.6\n"
#: utils/cpuidle-info.c:209
#, fuzzy, c-format
msgid "You can't specify more than one output-specific argument\n"
msgstr ""
"Nelze zadat více než jeden parametr -c nebo --cpu\n"
"anebo více než jeden parametr určující výstup\n"
#~ msgid ""
#~ " -c CPU, --cpu CPU CPU number which information shall be determined "
#~ "about\n"
#~ msgstr ""
#~ " -c CPU, --cpu CPU Číslo CPU, o kterém se mají zjistit informace\n"
#~ msgid ""
#~ " -c CPU, --cpu CPU number of CPU where cpufreq settings shall be "
#~ "modified\n"
#~ msgstr ""
#~ " -c CPU, --cpu CPU Číslo CPU pro který se má provést nastavení "
#~ "cpufreq\n"
Reference in a new issue View git blame Copy permalink