linux-stable/drivers/clk/mvebu/armada-37xx-periph.c
Pali Rohár e93033aff6 clk: mvebu: armada-37xx-periph: Fix workaround for switching from L1 to L0
When CPU frequency is at 250 MHz and set_rate() is called with 500 MHz (L1)
quickly followed by a call with 1 GHz (L0), the CPU does not necessarily
stay in L1 for at least 20ms as is required by Marvell errata.

This situation happens frequently with the ondemand cpufreq governor and
can be also reproduced with userspace governor. In most cases it causes CPU
to crash.

This change fixes the above issue and ensures that the CPU always stays in
L1 for at least 20ms when switching from any state to L0.

Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Tomasz Maciej Nowak <tmn505@gmail.com>
Tested-by: Anders Trier Olesen <anders.trier.olesen@gmail.com>
Tested-by: Philip Soares <philips@netisense.com>
Fixes: 61c40f35f5 ("clk: mvebu: armada-37xx-periph: Fix switching CPU rate from 300Mhz to 1.2GHz")
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2021-04-09 15:17:33 +05:30

807 lines
22 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Marvell Armada 37xx SoC Peripheral clocks
*
* Copyright (C) 2016 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
*
* Most of the peripheral clocks can be modelled like this:
* _____ _______ _______
* TBG-A-P --| | | | | | ______
* TBG-B-P --| Mux |--| /div1 |--| /div2 |--| Gate |--> perip_clk
* TBG-A-S --| | | | | | |______|
* TBG-B-S --|_____| |_______| |_______|
*
* However some clocks may use only one or two block or and use the
* xtal clock as parent.
*/
#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#define TBG_SEL 0x0
#define DIV_SEL0 0x4
#define DIV_SEL1 0x8
#define DIV_SEL2 0xC
#define CLK_SEL 0x10
#define CLK_DIS 0x14
#define ARMADA_37XX_DVFS_LOAD_1 1
#define LOAD_LEVEL_NR 4
#define ARMADA_37XX_NB_L0L1 0x18
#define ARMADA_37XX_NB_L2L3 0x1C
#define ARMADA_37XX_NB_TBG_DIV_OFF 13
#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
#define ARMADA_37XX_NB_CLK_SEL_OFF 11
#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
#define ARMADA_37XX_NB_TBG_SEL_OFF 9
#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
#define ARMADA_37XX_NB_CONFIG_SHIFT 16
#define ARMADA_37XX_NB_DYN_MOD 0x24
#define ARMADA_37XX_NB_DFS_EN 31
#define ARMADA_37XX_NB_CPU_LOAD 0x30
#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
#define ARMADA_37XX_DVFS_LOAD_0 0
#define ARMADA_37XX_DVFS_LOAD_1 1
#define ARMADA_37XX_DVFS_LOAD_2 2
#define ARMADA_37XX_DVFS_LOAD_3 3
struct clk_periph_driver_data {
struct clk_hw_onecell_data *hw_data;
spinlock_t lock;
void __iomem *reg;
/* Storage registers for suspend/resume operations */
u32 tbg_sel;
u32 div_sel0;
u32 div_sel1;
u32 div_sel2;
u32 clk_sel;
u32 clk_dis;
};
struct clk_double_div {
struct clk_hw hw;
void __iomem *reg1;
u8 shift1;
void __iomem *reg2;
u8 shift2;
};
struct clk_pm_cpu {
struct clk_hw hw;
void __iomem *reg_mux;
u8 shift_mux;
u32 mask_mux;
void __iomem *reg_div;
u8 shift_div;
struct regmap *nb_pm_base;
unsigned long l1_expiration;
};
#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)
struct clk_periph_data {
const char *name;
const char * const *parent_names;
int num_parents;
struct clk_hw *mux_hw;
struct clk_hw *rate_hw;
struct clk_hw *gate_hw;
struct clk_hw *muxrate_hw;
bool is_double_div;
};
static const struct clk_div_table clk_table6[] = {
{ .val = 1, .div = 1, },
{ .val = 2, .div = 2, },
{ .val = 3, .div = 3, },
{ .val = 4, .div = 4, },
{ .val = 5, .div = 5, },
{ .val = 6, .div = 6, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_div_table clk_table1[] = {
{ .val = 0, .div = 1, },
{ .val = 1, .div = 2, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_div_table clk_table2[] = {
{ .val = 0, .div = 2, },
{ .val = 1, .div = 4, },
{ .val = 0, .div = 0, }, /* last entry */
};
static const struct clk_ops clk_double_div_ops;
static const struct clk_ops clk_pm_cpu_ops;
#define PERIPH_GATE(_name, _bit) \
struct clk_gate gate_##_name = { \
.reg = (void *)CLK_DIS, \
.bit_idx = _bit, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_gate_ops, \
} \
};
#define PERIPH_MUX(_name, _shift) \
struct clk_mux mux_##_name = { \
.reg = (void *)TBG_SEL, \
.shift = _shift, \
.mask = 3, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_mux_ro_ops, \
} \
};
#define PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2) \
struct clk_double_div rate_##_name = { \
.reg1 = (void *)_reg1, \
.reg2 = (void *)_reg2, \
.shift1 = _shift1, \
.shift2 = _shift2, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_double_div_ops, \
} \
};
#define PERIPH_DIV(_name, _reg, _shift, _table) \
struct clk_divider rate_##_name = { \
.reg = (void *)_reg, \
.table = _table, \
.shift = _shift, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_divider_ro_ops, \
} \
};
#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \
struct clk_pm_cpu muxrate_##_name = { \
.reg_mux = (void *)TBG_SEL, \
.mask_mux = 3, \
.shift_mux = _shift1, \
.reg_div = (void *)_reg, \
.shift_div = _shift2, \
.hw.init = &(struct clk_init_data){ \
.ops = &clk_pm_cpu_ops, \
} \
};
#define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_GATE(_name, _bit); \
static PERIPH_MUX(_name, _shift); \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
#define PERIPH_CLK_FULL(_name, _bit, _shift, _reg, _shift1, _table) \
static PERIPH_GATE(_name, _bit); \
static PERIPH_MUX(_name, _shift); \
static PERIPH_DIV(_name, _reg, _shift1, _table);
#define PERIPH_CLK_GATE_DIV(_name, _bit, _reg, _shift, _table) \
static PERIPH_GATE(_name, _bit); \
static PERIPH_DIV(_name, _reg, _shift, _table);
#define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_MUX(_name, _shift); \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
#define REF_CLK_FULL(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
}
#define REF_CLK_FULL_DD(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
.is_double_div = true, \
}
#define REF_CLK_GATE(_name, _parent_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ _parent_name}, \
.num_parents = 1, \
.gate_hw = &gate_##_name.hw, \
}
#define REF_CLK_GATE_DIV(_name, _parent_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ _parent_name}, \
.num_parents = 1, \
.gate_hw = &gate_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
}
#define REF_CLK_PM_CPU(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.muxrate_hw = &muxrate_##_name.hw, \
}
#define REF_CLK_MUX_DD(_name) \
{ .name = #_name, \
.parent_names = (const char *[]){ "TBG-A-P", \
"TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
.num_parents = 4, \
.mux_hw = &mux_##_name.hw, \
.rate_hw = &rate_##_name.hw, \
.is_double_div = true, \
}
/* NB periph clocks */
PERIPH_CLK_FULL_DD(mmc, 2, 0, DIV_SEL2, DIV_SEL2, 16, 13);
PERIPH_CLK_FULL_DD(sata_host, 3, 2, DIV_SEL2, DIV_SEL2, 10, 7);
PERIPH_CLK_FULL_DD(sec_at, 6, 4, DIV_SEL1, DIV_SEL1, 3, 0);
PERIPH_CLK_FULL_DD(sec_dap, 7, 6, DIV_SEL1, DIV_SEL1, 9, 6);
PERIPH_CLK_FULL_DD(tscem, 8, 8, DIV_SEL1, DIV_SEL1, 15, 12);
PERIPH_CLK_FULL(tscem_tmx, 10, 10, DIV_SEL1, 18, clk_table6);
static PERIPH_GATE(avs, 11);
PERIPH_CLK_FULL_DD(pwm, 13, 14, DIV_SEL0, DIV_SEL0, 3, 0);
PERIPH_CLK_FULL_DD(sqf, 12, 12, DIV_SEL1, DIV_SEL1, 27, 24);
static PERIPH_GATE(i2c_2, 16);
static PERIPH_GATE(i2c_1, 17);
PERIPH_CLK_GATE_DIV(ddr_phy, 19, DIV_SEL0, 18, clk_table2);
PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV_SEL0, DIV_SEL0, 15, 12);
PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);
static struct clk_periph_data data_nb[] = {
REF_CLK_FULL_DD(mmc),
REF_CLK_FULL_DD(sata_host),
REF_CLK_FULL_DD(sec_at),
REF_CLK_FULL_DD(sec_dap),
REF_CLK_FULL_DD(tscem),
REF_CLK_FULL(tscem_tmx),
REF_CLK_GATE(avs, "xtal"),
REF_CLK_FULL_DD(sqf),
REF_CLK_FULL_DD(pwm),
REF_CLK_GATE(i2c_2, "xtal"),
REF_CLK_GATE(i2c_1, "xtal"),
REF_CLK_GATE_DIV(ddr_phy, "TBG-A-S"),
REF_CLK_FULL_DD(ddr_fclk),
REF_CLK_FULL(trace),
REF_CLK_FULL(counter),
REF_CLK_FULL_DD(eip97),
REF_CLK_PM_CPU(cpu),
{ },
};
/* SB periph clocks */
PERIPH_CLK_MUX_DD(gbe_50, 6, DIV_SEL2, DIV_SEL2, 6, 9);
PERIPH_CLK_MUX_DD(gbe_core, 8, DIV_SEL1, DIV_SEL1, 18, 21);
PERIPH_CLK_MUX_DD(gbe_125, 10, DIV_SEL1, DIV_SEL1, 6, 9);
static PERIPH_GATE(gbe1_50, 0);
static PERIPH_GATE(gbe0_50, 1);
static PERIPH_GATE(gbe1_125, 2);
static PERIPH_GATE(gbe0_125, 3);
PERIPH_CLK_GATE_DIV(gbe1_core, 4, DIV_SEL1, 13, clk_table1);
PERIPH_CLK_GATE_DIV(gbe0_core, 5, DIV_SEL1, 14, clk_table1);
PERIPH_CLK_GATE_DIV(gbe_bm, 12, DIV_SEL1, 0, clk_table1);
PERIPH_CLK_FULL_DD(sdio, 11, 14, DIV_SEL0, DIV_SEL0, 3, 6);
PERIPH_CLK_FULL_DD(usb32_usb2_sys, 16, 16, DIV_SEL0, DIV_SEL0, 9, 12);
PERIPH_CLK_FULL_DD(usb32_ss_sys, 17, 18, DIV_SEL0, DIV_SEL0, 15, 18);
static PERIPH_GATE(pcie, 14);
static struct clk_periph_data data_sb[] = {
REF_CLK_MUX_DD(gbe_50),
REF_CLK_MUX_DD(gbe_core),
REF_CLK_MUX_DD(gbe_125),
REF_CLK_GATE(gbe1_50, "gbe_50"),
REF_CLK_GATE(gbe0_50, "gbe_50"),
REF_CLK_GATE(gbe1_125, "gbe_125"),
REF_CLK_GATE(gbe0_125, "gbe_125"),
REF_CLK_GATE_DIV(gbe1_core, "gbe_core"),
REF_CLK_GATE_DIV(gbe0_core, "gbe_core"),
REF_CLK_GATE_DIV(gbe_bm, "gbe_core"),
REF_CLK_FULL_DD(sdio),
REF_CLK_FULL_DD(usb32_usb2_sys),
REF_CLK_FULL_DD(usb32_ss_sys),
REF_CLK_GATE(pcie, "gbe_core"),
{ },
};
static unsigned int get_div(void __iomem *reg, int shift)
{
u32 val;
val = (readl(reg) >> shift) & 0x7;
if (val > 6)
return 0;
return val;
}
static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_double_div *double_div = to_clk_double_div(hw);
unsigned int div;
div = get_div(double_div->reg1, double_div->shift1);
div *= get_div(double_div->reg2, double_div->shift2);
return DIV_ROUND_UP_ULL((u64)parent_rate, div);
}
static const struct clk_ops clk_double_div_ops = {
.recalc_rate = clk_double_div_recalc_rate,
};
static void armada_3700_pm_dvfs_update_regs(unsigned int load_level,
unsigned int *reg,
unsigned int *offset)
{
if (load_level <= ARMADA_37XX_DVFS_LOAD_1)
*reg = ARMADA_37XX_NB_L0L1;
else
*reg = ARMADA_37XX_NB_L2L3;
if (load_level == ARMADA_37XX_DVFS_LOAD_0 ||
load_level == ARMADA_37XX_DVFS_LOAD_2)
*offset += ARMADA_37XX_NB_CONFIG_SHIFT;
}
static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base)
{
unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD;
if (IS_ERR(base))
return false;
regmap_read(base, reg, &val);
return !!(val & BIT(ARMADA_37XX_NB_DFS_EN));
}
static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base)
{
unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF;
unsigned int load_level, div;
/*
* This function is always called after the function
* armada_3700_pm_dvfs_is_enabled, so no need to check again
* if the base is valid.
*/
regmap_read(base, reg, &load_level);
/*
* The register and the offset inside this register accessed to
* read the current divider depend on the load level
*/
load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &div);
return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK;
}
static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base)
{
unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF;
unsigned int load_level, sel;
/*
* This function is always called after the function
* armada_3700_pm_dvfs_is_enabled, so no need to check again
* if the base is valid
*/
regmap_read(base, reg, &load_level);
/*
* The register and the offset inside this register accessed to
* read the current divider depend on the load level
*/
load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &sel);
return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK;
}
static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
u32 val;
if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base);
} else {
val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
val &= pm_cpu->mask_mux;
}
return val;
}
static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
unsigned int div;
if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base))
div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base);
else
div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
return DIV_ROUND_UP_ULL((u64)parent_rate, div);
}
static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
struct regmap *base = pm_cpu->nb_pm_base;
unsigned int div = *parent_rate / rate;
unsigned int load_level;
/* only available when DVFS is enabled */
if (!armada_3700_pm_dvfs_is_enabled(base))
return -EINVAL;
for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &val);
val >>= offset;
val &= ARMADA_37XX_NB_TBG_DIV_MASK;
if (val == div)
/*
* We found a load level matching the target
* divider, switch to this load level and
* return.
*/
return *parent_rate / div;
}
/* We didn't find any valid divider */
return -EINVAL;
}
/*
* Workaround when base CPU frequnecy is 1000 or 1200 MHz
*
* Switching the CPU from the L2 or L3 frequencies (250/300 or 200 MHz
* respectively) to L0 frequency (1/1.2 GHz) requires a significant
* amount of time to let VDD stabilize to the appropriate
* voltage. This amount of time is large enough that it cannot be
* covered by the hardware countdown register. Due to this, the CPU
* might start operating at L0 before the voltage is stabilized,
* leading to CPU stalls.
*
* To work around this problem, we prevent switching directly from the
* L2/L3 frequencies to the L0 frequency, and instead switch to the L1
* frequency in-between. The sequence therefore becomes:
* 1. First switch from L2/L3 (200/250/300 MHz) to L1 (500/600 MHz)
* 2. Sleep 20ms for stabling VDD voltage
* 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz).
*/
static void clk_pm_cpu_set_rate_wa(struct clk_pm_cpu *pm_cpu,
unsigned int new_level, unsigned long rate,
struct regmap *base)
{
unsigned int cur_level;
regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level);
cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
if (cur_level == new_level)
return;
/*
* System wants to go to L1 on its own. If we are going from L2/L3,
* remember when 20ms will expire. If from L0, set the value so that
* next switch to L0 won't have to wait.
*/
if (new_level == ARMADA_37XX_DVFS_LOAD_1) {
if (cur_level == ARMADA_37XX_DVFS_LOAD_0)
pm_cpu->l1_expiration = jiffies;
else
pm_cpu->l1_expiration = jiffies + msecs_to_jiffies(20);
return;
}
/*
* If we are setting to L2/L3, just invalidate L1 expiration time,
* sleeping is not needed.
*/
if (rate < 1000*1000*1000)
goto invalidate_l1_exp;
/*
* We are going to L0 with rate >= 1GHz. Check whether we have been at
* L1 for long enough time. If not, go to L1 for 20ms.
*/
if (pm_cpu->l1_expiration && jiffies >= pm_cpu->l1_expiration)
goto invalidate_l1_exp;
regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD,
ARMADA_37XX_NB_CPU_LOAD_MASK,
ARMADA_37XX_DVFS_LOAD_1);
msleep(20);
invalidate_l1_exp:
pm_cpu->l1_expiration = 0;
}
static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
struct regmap *base = pm_cpu->nb_pm_base;
unsigned int div = parent_rate / rate;
unsigned int load_level;
/* only available when DVFS is enabled */
if (!armada_3700_pm_dvfs_is_enabled(base))
return -EINVAL;
for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
unsigned int reg, mask, val,
offset = ARMADA_37XX_NB_TBG_DIV_OFF;
armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
regmap_read(base, reg, &val);
val >>= offset;
val &= ARMADA_37XX_NB_TBG_DIV_MASK;
if (val == div) {
/*
* We found a load level matching the target
* divider, switch to this load level and
* return.
*/
reg = ARMADA_37XX_NB_CPU_LOAD;
mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
/* Apply workaround when base CPU frequency is 1000 or 1200 MHz */
if (parent_rate >= 1000*1000*1000)
clk_pm_cpu_set_rate_wa(pm_cpu, load_level, rate, base);
regmap_update_bits(base, reg, mask, load_level);
return rate;
}
}
/* We didn't find any valid divider */
return -EINVAL;
}
static const struct clk_ops clk_pm_cpu_ops = {
.get_parent = clk_pm_cpu_get_parent,
.round_rate = clk_pm_cpu_round_rate,
.set_rate = clk_pm_cpu_set_rate,
.recalc_rate = clk_pm_cpu_recalc_rate,
};
static const struct of_device_id armada_3700_periph_clock_of_match[] = {
{ .compatible = "marvell,armada-3700-periph-clock-nb",
.data = data_nb, },
{ .compatible = "marvell,armada-3700-periph-clock-sb",
.data = data_sb, },
{ }
};
static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
void __iomem *reg, spinlock_t *lock,
struct device *dev, struct clk_hw **hw)
{
const struct clk_ops *mux_ops = NULL, *gate_ops = NULL,
*rate_ops = NULL;
struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *rate_hw = NULL;
if (data->mux_hw) {
struct clk_mux *mux;
mux_hw = data->mux_hw;
mux = to_clk_mux(mux_hw);
mux->lock = lock;
mux_ops = mux_hw->init->ops;
mux->reg = reg + (u64)mux->reg;
}
if (data->gate_hw) {
struct clk_gate *gate;
gate_hw = data->gate_hw;
gate = to_clk_gate(gate_hw);
gate->lock = lock;
gate_ops = gate_hw->init->ops;
gate->reg = reg + (u64)gate->reg;
gate->flags = CLK_GATE_SET_TO_DISABLE;
}
if (data->rate_hw) {
rate_hw = data->rate_hw;
rate_ops = rate_hw->init->ops;
if (data->is_double_div) {
struct clk_double_div *rate;
rate = to_clk_double_div(rate_hw);
rate->reg1 = reg + (u64)rate->reg1;
rate->reg2 = reg + (u64)rate->reg2;
} else {
struct clk_divider *rate = to_clk_divider(rate_hw);
const struct clk_div_table *clkt;
int table_size = 0;
rate->reg = reg + (u64)rate->reg;
for (clkt = rate->table; clkt->div; clkt++)
table_size++;
rate->width = order_base_2(table_size);
rate->lock = lock;
}
}
if (data->muxrate_hw) {
struct clk_pm_cpu *pmcpu_clk;
struct clk_hw *muxrate_hw = data->muxrate_hw;
struct regmap *map;
pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;
mux_hw = muxrate_hw;
rate_hw = muxrate_hw;
mux_ops = muxrate_hw->init->ops;
rate_ops = muxrate_hw->init->ops;
map = syscon_regmap_lookup_by_compatible(
"marvell,armada-3700-nb-pm");
pmcpu_clk->nb_pm_base = map;
}
*hw = clk_hw_register_composite(dev, data->name, data->parent_names,
data->num_parents, mux_hw,
mux_ops, rate_hw, rate_ops,
gate_hw, gate_ops, CLK_IGNORE_UNUSED);
return PTR_ERR_OR_ZERO(*hw);
}
static int __maybe_unused armada_3700_periph_clock_suspend(struct device *dev)
{
struct clk_periph_driver_data *data = dev_get_drvdata(dev);
data->tbg_sel = readl(data->reg + TBG_SEL);
data->div_sel0 = readl(data->reg + DIV_SEL0);
data->div_sel1 = readl(data->reg + DIV_SEL1);
data->div_sel2 = readl(data->reg + DIV_SEL2);
data->clk_sel = readl(data->reg + CLK_SEL);
data->clk_dis = readl(data->reg + CLK_DIS);
return 0;
}
static int __maybe_unused armada_3700_periph_clock_resume(struct device *dev)
{
struct clk_periph_driver_data *data = dev_get_drvdata(dev);
/* Follow the same order than what the Cortex-M3 does (ATF code) */
writel(data->clk_dis, data->reg + CLK_DIS);
writel(data->div_sel0, data->reg + DIV_SEL0);
writel(data->div_sel1, data->reg + DIV_SEL1);
writel(data->div_sel2, data->reg + DIV_SEL2);
writel(data->tbg_sel, data->reg + TBG_SEL);
writel(data->clk_sel, data->reg + CLK_SEL);
return 0;
}
static const struct dev_pm_ops armada_3700_periph_clock_pm_ops = {
SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(armada_3700_periph_clock_suspend,
armada_3700_periph_clock_resume)
};
static int armada_3700_periph_clock_probe(struct platform_device *pdev)
{
struct clk_periph_driver_data *driver_data;
struct device_node *np = pdev->dev.of_node;
const struct clk_periph_data *data;
struct device *dev = &pdev->dev;
int num_periph = 0, i, ret;
struct resource *res;
data = of_device_get_match_data(dev);
if (!data)
return -ENODEV;
while (data[num_periph].name)
num_periph++;
driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL);
if (!driver_data)
return -ENOMEM;
driver_data->hw_data = devm_kzalloc(dev,
struct_size(driver_data->hw_data,
hws, num_periph),
GFP_KERNEL);
if (!driver_data->hw_data)
return -ENOMEM;
driver_data->hw_data->num = num_periph;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
driver_data->reg = devm_ioremap_resource(dev, res);
if (IS_ERR(driver_data->reg))
return PTR_ERR(driver_data->reg);
spin_lock_init(&driver_data->lock);
for (i = 0; i < num_periph; i++) {
struct clk_hw **hw = &driver_data->hw_data->hws[i];
if (armada_3700_add_composite_clk(&data[i], driver_data->reg,
&driver_data->lock, dev, hw))
dev_err(dev, "Can't register periph clock %s\n",
data[i].name);
}
ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
driver_data->hw_data);
if (ret) {
for (i = 0; i < num_periph; i++)
clk_hw_unregister(driver_data->hw_data->hws[i]);
return ret;
}
platform_set_drvdata(pdev, driver_data);
return 0;
}
static int armada_3700_periph_clock_remove(struct platform_device *pdev)
{
struct clk_periph_driver_data *data = platform_get_drvdata(pdev);
struct clk_hw_onecell_data *hw_data = data->hw_data;
int i;
of_clk_del_provider(pdev->dev.of_node);
for (i = 0; i < hw_data->num; i++)
clk_hw_unregister(hw_data->hws[i]);
return 0;
}
static struct platform_driver armada_3700_periph_clock_driver = {
.probe = armada_3700_periph_clock_probe,
.remove = armada_3700_periph_clock_remove,
.driver = {
.name = "marvell-armada-3700-periph-clock",
.of_match_table = armada_3700_periph_clock_of_match,
.pm = &armada_3700_periph_clock_pm_ops,
},
};
builtin_platform_driver(armada_3700_periph_clock_driver);