mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-04 01:49:36 +00:00
![Tony Lindgren](/assets/img/avatar_default.png)
We need to check for errors when calling cpu_pm_enter() and cpu_cluster_pm_enter(). And we need to bail out on errors as otherwise we can enter a deeper idle state when not desired. I'm not aware of the lack of error handling causing issues yet, but we need this at least for blocking deeper idle states when a GPIO instance has pending interrupts. Cc: Dave Gerlach <d-gerlach@ti.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: Ladislav Michl <ladis@linux-mips.org> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20200304225433.37336-2-tony@atomide.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
406 lines
10 KiB
C
406 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* linux/arch/arm/mach-omap2/cpuidle34xx.c
|
|
*
|
|
* OMAP3 CPU IDLE Routines
|
|
*
|
|
* Copyright (C) 2008 Texas Instruments, Inc.
|
|
* Rajendra Nayak <rnayak@ti.com>
|
|
*
|
|
* Copyright (C) 2007 Texas Instruments, Inc.
|
|
* Karthik Dasu <karthik-dp@ti.com>
|
|
*
|
|
* Copyright (C) 2006 Nokia Corporation
|
|
* Tony Lindgren <tony@atomide.com>
|
|
*
|
|
* Copyright (C) 2005 Texas Instruments, Inc.
|
|
* Richard Woodruff <r-woodruff2@ti.com>
|
|
*
|
|
* Based on pm.c for omap2
|
|
*/
|
|
|
|
#include <linux/sched.h>
|
|
#include <linux/cpuidle.h>
|
|
#include <linux/export.h>
|
|
#include <linux/cpu_pm.h>
|
|
#include <asm/cpuidle.h>
|
|
|
|
#include "powerdomain.h"
|
|
#include "clockdomain.h"
|
|
|
|
#include "pm.h"
|
|
#include "control.h"
|
|
#include "common.h"
|
|
#include "soc.h"
|
|
|
|
/* Mach specific information to be recorded in the C-state driver_data */
|
|
struct omap3_idle_statedata {
|
|
u8 mpu_state;
|
|
u8 core_state;
|
|
u8 per_min_state;
|
|
u8 flags;
|
|
};
|
|
|
|
static struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd;
|
|
|
|
/*
|
|
* Possible flag bits for struct omap3_idle_statedata.flags:
|
|
*
|
|
* OMAP_CPUIDLE_CX_NO_CLKDM_IDLE: don't allow the MPU clockdomain to go
|
|
* inactive. This in turn prevents the MPU DPLL from entering autoidle
|
|
* mode, so wakeup latency is greatly reduced, at the cost of additional
|
|
* energy consumption. This also prevents the CORE clockdomain from
|
|
* entering idle.
|
|
*/
|
|
#define OMAP_CPUIDLE_CX_NO_CLKDM_IDLE BIT(0)
|
|
|
|
/*
|
|
* Prevent PER OFF if CORE is not in RETention or OFF as this would
|
|
* disable PER wakeups completely.
|
|
*/
|
|
static struct omap3_idle_statedata omap3_idle_data[] = {
|
|
{
|
|
.mpu_state = PWRDM_POWER_ON,
|
|
.core_state = PWRDM_POWER_ON,
|
|
/* In C1 do not allow PER state lower than CORE state */
|
|
.per_min_state = PWRDM_POWER_ON,
|
|
.flags = OMAP_CPUIDLE_CX_NO_CLKDM_IDLE,
|
|
},
|
|
{
|
|
.mpu_state = PWRDM_POWER_ON,
|
|
.core_state = PWRDM_POWER_ON,
|
|
.per_min_state = PWRDM_POWER_RET,
|
|
},
|
|
{
|
|
.mpu_state = PWRDM_POWER_RET,
|
|
.core_state = PWRDM_POWER_ON,
|
|
.per_min_state = PWRDM_POWER_RET,
|
|
},
|
|
{
|
|
.mpu_state = PWRDM_POWER_OFF,
|
|
.core_state = PWRDM_POWER_ON,
|
|
.per_min_state = PWRDM_POWER_RET,
|
|
},
|
|
{
|
|
.mpu_state = PWRDM_POWER_RET,
|
|
.core_state = PWRDM_POWER_RET,
|
|
.per_min_state = PWRDM_POWER_OFF,
|
|
},
|
|
{
|
|
.mpu_state = PWRDM_POWER_OFF,
|
|
.core_state = PWRDM_POWER_RET,
|
|
.per_min_state = PWRDM_POWER_OFF,
|
|
},
|
|
{
|
|
.mpu_state = PWRDM_POWER_OFF,
|
|
.core_state = PWRDM_POWER_OFF,
|
|
.per_min_state = PWRDM_POWER_OFF,
|
|
},
|
|
};
|
|
|
|
/**
|
|
* omap3_enter_idle - Programs OMAP3 to enter the specified state
|
|
* @dev: cpuidle device
|
|
* @drv: cpuidle driver
|
|
* @index: the index of state to be entered
|
|
*/
|
|
static int omap3_enter_idle(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv,
|
|
int index)
|
|
{
|
|
struct omap3_idle_statedata *cx = &omap3_idle_data[index];
|
|
int error;
|
|
|
|
if (omap_irq_pending() || need_resched())
|
|
goto return_sleep_time;
|
|
|
|
/* Deny idle for C1 */
|
|
if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE) {
|
|
clkdm_deny_idle(mpu_pd->pwrdm_clkdms[0]);
|
|
} else {
|
|
pwrdm_set_next_pwrst(mpu_pd, cx->mpu_state);
|
|
pwrdm_set_next_pwrst(core_pd, cx->core_state);
|
|
}
|
|
|
|
/*
|
|
* Call idle CPU PM enter notifier chain so that
|
|
* VFP context is saved.
|
|
*/
|
|
if (cx->mpu_state == PWRDM_POWER_OFF) {
|
|
error = cpu_pm_enter();
|
|
if (error)
|
|
goto out_clkdm_set;
|
|
}
|
|
|
|
/* Execute ARM wfi */
|
|
omap_sram_idle();
|
|
|
|
/*
|
|
* Call idle CPU PM enter notifier chain to restore
|
|
* VFP context.
|
|
*/
|
|
if (cx->mpu_state == PWRDM_POWER_OFF &&
|
|
pwrdm_read_prev_pwrst(mpu_pd) == PWRDM_POWER_OFF)
|
|
cpu_pm_exit();
|
|
|
|
out_clkdm_set:
|
|
/* Re-allow idle for C1 */
|
|
if (cx->flags & OMAP_CPUIDLE_CX_NO_CLKDM_IDLE)
|
|
clkdm_allow_idle(mpu_pd->pwrdm_clkdms[0]);
|
|
|
|
return_sleep_time:
|
|
|
|
return index;
|
|
}
|
|
|
|
/**
|
|
* next_valid_state - Find next valid C-state
|
|
* @dev: cpuidle device
|
|
* @drv: cpuidle driver
|
|
* @index: Index of currently selected c-state
|
|
*
|
|
* If the state corresponding to index is valid, index is returned back
|
|
* to the caller. Else, this function searches for a lower c-state which is
|
|
* still valid (as defined in omap3_power_states[]) and returns its index.
|
|
*
|
|
* A state is valid if the 'valid' field is enabled and
|
|
* if it satisfies the enable_off_mode condition.
|
|
*/
|
|
static int next_valid_state(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv, int index)
|
|
{
|
|
struct omap3_idle_statedata *cx = &omap3_idle_data[index];
|
|
u32 mpu_deepest_state = PWRDM_POWER_RET;
|
|
u32 core_deepest_state = PWRDM_POWER_RET;
|
|
int idx;
|
|
int next_index = 0; /* C1 is the default value */
|
|
|
|
if (enable_off_mode) {
|
|
mpu_deepest_state = PWRDM_POWER_OFF;
|
|
/*
|
|
* Erratum i583: valable for ES rev < Es1.2 on 3630.
|
|
* CORE OFF mode is not supported in a stable form, restrict
|
|
* instead the CORE state to RET.
|
|
*/
|
|
if (!IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583))
|
|
core_deepest_state = PWRDM_POWER_OFF;
|
|
}
|
|
|
|
/* Check if current state is valid */
|
|
if ((cx->mpu_state >= mpu_deepest_state) &&
|
|
(cx->core_state >= core_deepest_state))
|
|
return index;
|
|
|
|
/*
|
|
* Drop to next valid state.
|
|
* Start search from the next (lower) state.
|
|
*/
|
|
for (idx = index - 1; idx >= 0; idx--) {
|
|
cx = &omap3_idle_data[idx];
|
|
if ((cx->mpu_state >= mpu_deepest_state) &&
|
|
(cx->core_state >= core_deepest_state)) {
|
|
next_index = idx;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return next_index;
|
|
}
|
|
|
|
/**
|
|
* omap3_enter_idle_bm - Checks for any bus activity
|
|
* @dev: cpuidle device
|
|
* @drv: cpuidle driver
|
|
* @index: array index of target state to be programmed
|
|
*
|
|
* This function checks for any pending activity and then programs
|
|
* the device to the specified or a safer state.
|
|
*/
|
|
static int omap3_enter_idle_bm(struct cpuidle_device *dev,
|
|
struct cpuidle_driver *drv,
|
|
int index)
|
|
{
|
|
int new_state_idx, ret;
|
|
u8 per_next_state, per_saved_state;
|
|
struct omap3_idle_statedata *cx;
|
|
|
|
/*
|
|
* Use only C1 if CAM is active.
|
|
* CAM does not have wakeup capability in OMAP3.
|
|
*/
|
|
if (pwrdm_read_pwrst(cam_pd) == PWRDM_POWER_ON)
|
|
new_state_idx = drv->safe_state_index;
|
|
else
|
|
new_state_idx = next_valid_state(dev, drv, index);
|
|
|
|
/*
|
|
* FIXME: we currently manage device-specific idle states
|
|
* for PER and CORE in combination with CPU-specific
|
|
* idle states. This is wrong, and device-specific
|
|
* idle management needs to be separated out into
|
|
* its own code.
|
|
*/
|
|
|
|
/* Program PER state */
|
|
cx = &omap3_idle_data[new_state_idx];
|
|
|
|
per_next_state = pwrdm_read_next_pwrst(per_pd);
|
|
per_saved_state = per_next_state;
|
|
if (per_next_state < cx->per_min_state) {
|
|
per_next_state = cx->per_min_state;
|
|
pwrdm_set_next_pwrst(per_pd, per_next_state);
|
|
}
|
|
|
|
ret = omap3_enter_idle(dev, drv, new_state_idx);
|
|
|
|
/* Restore original PER state if it was modified */
|
|
if (per_next_state != per_saved_state)
|
|
pwrdm_set_next_pwrst(per_pd, per_saved_state);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct cpuidle_driver omap3_idle_driver = {
|
|
.name = "omap3_idle",
|
|
.owner = THIS_MODULE,
|
|
.states = {
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 2 + 2,
|
|
.target_residency = 5,
|
|
.name = "C1",
|
|
.desc = "MPU ON + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 10 + 10,
|
|
.target_residency = 30,
|
|
.name = "C2",
|
|
.desc = "MPU ON + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 50 + 50,
|
|
.target_residency = 300,
|
|
.name = "C3",
|
|
.desc = "MPU RET + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 1500 + 1800,
|
|
.target_residency = 4000,
|
|
.name = "C4",
|
|
.desc = "MPU OFF + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 2500 + 7500,
|
|
.target_residency = 12000,
|
|
.name = "C5",
|
|
.desc = "MPU RET + CORE RET",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 3000 + 8500,
|
|
.target_residency = 15000,
|
|
.name = "C6",
|
|
.desc = "MPU OFF + CORE RET",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 10000 + 30000,
|
|
.target_residency = 30000,
|
|
.name = "C7",
|
|
.desc = "MPU OFF + CORE OFF",
|
|
},
|
|
},
|
|
.state_count = ARRAY_SIZE(omap3_idle_data),
|
|
.safe_state_index = 0,
|
|
};
|
|
|
|
/*
|
|
* Numbers based on measurements made in October 2009 for PM optimized kernel
|
|
* with CPU freq enabled on device Nokia N900. Assumes OPP2 (main idle OPP,
|
|
* and worst case latencies).
|
|
*/
|
|
static struct cpuidle_driver omap3430_idle_driver = {
|
|
.name = "omap3430_idle",
|
|
.owner = THIS_MODULE,
|
|
.states = {
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 110 + 162,
|
|
.target_residency = 5,
|
|
.name = "C1",
|
|
.desc = "MPU ON + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 106 + 180,
|
|
.target_residency = 309,
|
|
.name = "C2",
|
|
.desc = "MPU ON + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 107 + 410,
|
|
.target_residency = 46057,
|
|
.name = "C3",
|
|
.desc = "MPU RET + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 121 + 3374,
|
|
.target_residency = 46057,
|
|
.name = "C4",
|
|
.desc = "MPU OFF + CORE ON",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 855 + 1146,
|
|
.target_residency = 46057,
|
|
.name = "C5",
|
|
.desc = "MPU RET + CORE RET",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 7580 + 4134,
|
|
.target_residency = 484329,
|
|
.name = "C6",
|
|
.desc = "MPU OFF + CORE RET",
|
|
},
|
|
{
|
|
.enter = omap3_enter_idle_bm,
|
|
.exit_latency = 7505 + 15274,
|
|
.target_residency = 484329,
|
|
.name = "C7",
|
|
.desc = "MPU OFF + CORE OFF",
|
|
},
|
|
},
|
|
.state_count = ARRAY_SIZE(omap3_idle_data),
|
|
.safe_state_index = 0,
|
|
};
|
|
|
|
/* Public functions */
|
|
|
|
/**
|
|
* omap3_idle_init - Init routine for OMAP3 idle
|
|
*
|
|
* Registers the OMAP3 specific cpuidle driver to the cpuidle
|
|
* framework with the valid set of states.
|
|
*/
|
|
int __init omap3_idle_init(void)
|
|
{
|
|
mpu_pd = pwrdm_lookup("mpu_pwrdm");
|
|
core_pd = pwrdm_lookup("core_pwrdm");
|
|
per_pd = pwrdm_lookup("per_pwrdm");
|
|
cam_pd = pwrdm_lookup("cam_pwrdm");
|
|
|
|
if (!mpu_pd || !core_pd || !per_pd || !cam_pd)
|
|
return -ENODEV;
|
|
|
|
if (cpu_is_omap3430())
|
|
return cpuidle_register(&omap3430_idle_driver, NULL);
|
|
else
|
|
return cpuidle_register(&omap3_idle_driver, NULL);
|
|
}
|