linux-stable/arch/arm/mach-s3c/mach-real6410.c
Linus Torvalds e731f3146f ARM: SoC platform updates
SoC changes, a substantial part of this is cleanup of some of the older
 platforms that used to have a bunch of board files. In particular:
 
  - Removal of non-DT i.MX platforms that haven't seen activity in years,
    it's time to remove them.
  - A bunch of cleanup and removal of platform data for TI/OMAP platforms,
    moving over to genpd for power/reset control (yay!)
  - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
    closer to multiplatform support (not quite there yet, but getting
    close).
 
 THere are a few other changes too, smaller fixlets, etc. For new
 platform support, the primary ones re:
 
  - New SoC: Hisilicon SD5203, ARM926EJ-S platform.
  - Cpufreq support for i.MX7ULP
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl+TT4gPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx322MP/1mI56SyOFx30AqtWBPSjHJp+DzhOObyb4vD
 ndYuicBIn9tJwvVRBBZkfsbIU8EENVwrN3hOpesaj9L7xiqOqKakcnyC1REYmpIs
 8XBDfdZzy5PrMHIu3fF1ZDCQyO7KndGf5DfLVxJtcf1tSPQyQCuIA3FtS6d8Bxnz
 r491+om67ucnlFD5X0Spm3RdZH+ECmXx2iXwoS0Zi7P+X+S+ovG8wBV/X0ggeoBc
 Zgi4W01SiRupmSVZ6PA7FvWaLGQErQAALQOcFtMcFgjeWzc1v2QzcURELH8JW7ro
 72AH9st1Kvi3hoN2HNNzUnNUdQvZ+AdH8skMIpN/e1cBYqYStAF3gm/R9h+iVHbG
 GMmgzXHAFErfAW2UcF8tq1CzvQ5ChcTLNXdeoa8CeQbcDfocF3EyuKSPuDH+ve0H
 kk4tPesTAc6XCEVwLaGnoC75sdum5mSi8h9vqhln2KCdeTY7jxzH9YGHjm71Supb
 kV9vqo5Q5U/c5l2nU4r5q/DZdIahKsk3HIQZ0iG7BifAzamaTh4uyLVjtM6HSwNz
 tdHZaxoHd/PLI5IoeggFelx6qgvK5qVRLP0evgOdTLRFLj/ZbrOf0Q7DjdTy2BjZ
 Lgq461QqNapOzxq43G2IDT2+P62Q1+d+YLCKBgaGQaJicyU5m9STCNo3UBb1qH1h
 W6UwGF5z
 =0+Ee
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC changes, a substantial part of this is cleanup of some of the
  older platforms that used to have a bunch of board files.

  In particular:

   - Remove non-DT i.MX platforms that haven't seen activity in years,
     it's time to remove them.

   - A bunch of cleanup and removal of platform data for TI/OMAP
     platforms, moving over to genpd for power/reset control (yay!)

   - Major cleanup of Samsung S3C24xx and S3C64xx platforms, moving them
     closer to multiplatform support (not quite there yet, but getting
     close).

  There are a few other changes too, smaller fixlets, etc. For new
  platform support, the primary ones are:

   - New SoC: Hisilicon SD5203, ARM926EJ-S platform.

   - Cpufreq support for i.MX7ULP"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (121 commits)
  ARM: mstar: Select MStar intc
  ARM: stm32: Replace HTTP links with HTTPS ones
  ARM: debug: add UART early console support for SD5203
  ARM: hisi: add support for SD5203 SoC
  ARM: omap3: enable off mode automatically
  clk: imx: imx35: Remove mx35_clocks_init()
  clk: imx: imx31: Remove mx31_clocks_init()
  clk: imx: imx27: Remove mx27_clocks_init()
  ARM: imx: Remove unused definitions
  ARM: imx35: Retrieve the IIM base address from devicetree
  ARM: imx3: Retrieve the AVIC base address from devicetree
  ARM: imx3: Retrieve the CCM base address from devicetree
  ARM: imx31: Retrieve the IIM base address from devicetree
  ARM: imx27: Retrieve the CCM base address from devicetree
  ARM: imx27: Retrieve the SYSCTRL base address from devicetree
  ARM: s3c64xx: bring back notes from removed debug-macro.S
  ARM: s3c24xx: fix Wunused-variable warning on !MMU
  ARM: samsung: fix PM debug build with DEBUG_LL but !MMU
  MAINTAINERS: mark linux-samsung-soc list non-moderated
  ARM: imx: Remove remnant board file support pieces
  ...
2020-10-24 10:33:08 -07:00

333 lines
7.7 KiB
C

// SPDX-License-Identifier: GPL-2.0
//
// Copyright 2010 Darius Augulis <augulis.darius@gmail.com>
// Copyright 2008 Openmoko, Inc.
// Copyright 2008 Simtec Electronics
// Ben Dooks <ben@simtec.co.uk>
// http://armlinux.simtec.co.uk/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/fb.h>
#include <linux/gpio.h>
#include <linux/kernel.h>
#include <linux/list.h>
#include <linux/dm9000.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/types.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "map.h"
#include "regs-gpio.h"
#include "gpio-samsung.h"
#include <mach/irqs.h>
#include <linux/soc/samsung/s3c-adc.h>
#include "cpu.h"
#include "devs.h"
#include "fb.h"
#include <linux/platform_data/mtd-nand-s3c2410.h>
#include <linux/platform_data/touchscreen-s3c2410.h>
#include <video/platform_lcd.h>
#include <video/samsung_fimd.h>
#include "s3c64xx.h"
#include "regs-modem-s3c64xx.h"
#include "regs-srom-s3c64xx.h"
#define UCON S3C2410_UCON_DEFAULT
#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE)
static struct s3c2410_uartcfg real6410_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
},
};
/* DM9000AEP 10/100 ethernet controller */
static struct resource real6410_dm9k_resource[] = {
[0] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1, 2),
[1] = DEFINE_RES_MEM(S3C64XX_PA_XM0CSN1 + 4, 2),
[2] = DEFINE_RES_NAMED(S3C_EINT(7), 1, NULL, IORESOURCE_IRQ \
| IORESOURCE_IRQ_HIGHLEVEL),
};
static struct dm9000_plat_data real6410_dm9k_pdata = {
.flags = (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
};
static struct platform_device real6410_device_eth = {
.name = "dm9000",
.id = -1,
.num_resources = ARRAY_SIZE(real6410_dm9k_resource),
.resource = real6410_dm9k_resource,
.dev = {
.platform_data = &real6410_dm9k_pdata,
},
};
static struct s3c_fb_pd_win real6410_lcd_type0_fb_win = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 480,
.yres = 272,
};
static struct fb_videomode real6410_lcd_type0_timing = {
/* 4.3" 480x272 */
.left_margin = 3,
.right_margin = 2,
.upper_margin = 1,
.lower_margin = 1,
.hsync_len = 40,
.vsync_len = 1,
};
static struct s3c_fb_pd_win real6410_lcd_type1_fb_win = {
.max_bpp = 32,
.default_bpp = 16,
.xres = 800,
.yres = 480,
};
static struct fb_videomode real6410_lcd_type1_timing = {
/* 7.0" 800x480 */
.left_margin = 8,
.right_margin = 13,
.upper_margin = 7,
.lower_margin = 5,
.hsync_len = 3,
.vsync_len = 1,
.xres = 800,
.yres = 480,
};
static struct s3c_fb_platdata real6410_lcd_pdata[] __initdata = {
{
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &real6410_lcd_type0_timing,
.win[0] = &real6410_lcd_type0_fb_win,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
}, {
.setup_gpio = s3c64xx_fb_gpio_setup_24bpp,
.vtiming = &real6410_lcd_type1_timing,
.win[0] = &real6410_lcd_type1_fb_win,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
},
{ },
};
static struct mtd_partition real6410_nand_part[] = {
[0] = {
.name = "uboot",
.size = SZ_1M,
.offset = 0,
},
[1] = {
.name = "kernel",
.size = SZ_2M,
.offset = SZ_1M,
},
[2] = {
.name = "rootfs",
.size = MTDPART_SIZ_FULL,
.offset = SZ_1M + SZ_2M,
},
};
static struct s3c2410_nand_set real6410_nand_sets[] = {
[0] = {
.name = "nand",
.nr_chips = 1,
.nr_partitions = ARRAY_SIZE(real6410_nand_part),
.partitions = real6410_nand_part,
},
};
static struct s3c2410_platform_nand real6410_nand_info = {
.tacls = 25,
.twrph0 = 55,
.twrph1 = 40,
.nr_sets = ARRAY_SIZE(real6410_nand_sets),
.sets = real6410_nand_sets,
.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
};
static struct platform_device *real6410_devices[] __initdata = {
&real6410_device_eth,
&s3c_device_hsmmc0,
&s3c_device_hsmmc1,
&s3c_device_fb,
&s3c_device_nand,
&s3c_device_adc,
&s3c_device_ohci,
};
static void __init real6410_map_io(void)
{
u32 tmp;
s3c64xx_init_io(NULL, 0);
s3c24xx_init_clocks(12000000);
s3c24xx_init_uarts(real6410_uartcfgs, ARRAY_SIZE(real6410_uartcfgs));
s3c64xx_set_timer_source(S3C64XX_PWM3, S3C64XX_PWM4);
/* set the LCD type */
tmp = __raw_readl(S3C64XX_SPCON);
tmp &= ~S3C64XX_SPCON_LCD_SEL_MASK;
tmp |= S3C64XX_SPCON_LCD_SEL_RGB;
__raw_writel(tmp, S3C64XX_SPCON);
/* remove the LCD bypass */
tmp = __raw_readl(S3C64XX_MODEM_MIFPCON);
tmp &= ~MIFPCON_LCD_BYPASS;
__raw_writel(tmp, S3C64XX_MODEM_MIFPCON);
}
/*
* real6410_features string
*
* 0-9 LCD configuration
*
*/
static char real6410_features_str[12] __initdata = "0";
static int __init real6410_features_setup(char *str)
{
if (str)
strlcpy(real6410_features_str, str,
sizeof(real6410_features_str));
return 1;
}
__setup("real6410=", real6410_features_setup);
#define FEATURE_SCREEN (1 << 0)
struct real6410_features_t {
int done;
int lcd_index;
};
static void real6410_parse_features(
struct real6410_features_t *features,
const char *features_str)
{
const char *fp = features_str;
features->done = 0;
features->lcd_index = 0;
while (*fp) {
char f = *fp++;
switch (f) {
case '0'...'9': /* tft screen */
if (features->done & FEATURE_SCREEN) {
printk(KERN_INFO "REAL6410: '%c' ignored, "
"screen type already set\n", f);
} else {
int li = f - '0';
if (li >= ARRAY_SIZE(real6410_lcd_pdata))
printk(KERN_INFO "REAL6410: '%c' out "
"of range LCD mode\n", f);
else {
features->lcd_index = li;
}
}
features->done |= FEATURE_SCREEN;
break;
}
}
}
static void __init real6410_machine_init(void)
{
u32 cs1;
struct real6410_features_t features = { 0 };
printk(KERN_INFO "REAL6410: Option string real6410=%s\n",
real6410_features_str);
/* Parse the feature string */
real6410_parse_features(&features, real6410_features_str);
printk(KERN_INFO "REAL6410: selected LCD display is %dx%d\n",
real6410_lcd_pdata[features.lcd_index].win[0]->xres,
real6410_lcd_pdata[features.lcd_index].win[0]->yres);
s3c_fb_set_platdata(&real6410_lcd_pdata[features.lcd_index]);
s3c_nand_set_platdata(&real6410_nand_info);
s3c64xx_ts_set_platdata(NULL);
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S3C64XX_SROM_BW) &
~(S3C64XX_SROM_BW__CS_MASK << S3C64XX_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S3C64XX_SROM_BW__DATAWIDTH__SHIFT) |
(1 << S3C64XX_SROM_BW__WAITENABLE__SHIFT) |
(1 << S3C64XX_SROM_BW__BYTEENABLE__SHIFT)) <<
S3C64XX_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S3C64XX_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0 << S3C64XX_SROM_BCX__PMC__SHIFT) |
(6 << S3C64XX_SROM_BCX__TACP__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCAH__SHIFT) |
(1 << S3C64XX_SROM_BCX__TCOH__SHIFT) |
(13 << S3C64XX_SROM_BCX__TACC__SHIFT) |
(4 << S3C64XX_SROM_BCX__TCOS__SHIFT) |
(0 << S3C64XX_SROM_BCX__TACS__SHIFT), S3C64XX_SROM_BC1);
gpio_request(S3C64XX_GPF(15), "LCD power");
platform_add_devices(real6410_devices, ARRAY_SIZE(real6410_devices));
}
MACHINE_START(REAL6410, "REAL6410")
/* Maintainer: Darius Augulis <augulis.darius@gmail.com> */
.atag_offset = 0x100,
.nr_irqs = S3C64XX_NR_IRQS,
.init_irq = s3c6410_init_irq,
.map_io = real6410_map_io,
.init_machine = real6410_machine_init,
.init_time = s3c64xx_timer_init,
MACHINE_END