linux-stable/arch/arm/mach-sa1100/h3xxx.c
Linus Torvalds 24e44913aa ARM: SoC platform updates
SoC platform changes. Main theme this merge window:
 
  - The Netx platform (Netx 100/500) platform is removed by Linus Walleij--
    the SoC doesn't have active maintainers with hardware, and in
    discussions with the vendor the agreement was that it's OK to remove.
 
  - Russell King has a series of patches that cleans up and refactors
    SA1101 and RiscPC support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCAAtFiEElf+HevZ4QCAJmMQ+jBrnPN6EHHcFAl0yKOgPHG9sb2ZAbGl4
 b20ubmV0AAoJEIwa5zzehBx3SNEP/iJsMeeunX0P7Ym3zNFjykhspkkUmo7sEKuz
 NBcexnQpkm+OLgjfwT7j3kXvOs4mzMzH56J6h7dEDSHbQP1MDIgpMw6OEzMMsQTV
 XL1AWz1IO7Sq/mG17daPs9c75o6NYQ7pSEd/ncbjKuJQOpGsi4DyrVrhk9WdzYl2
 hcs4XOzOMZgDTsXHVdWkfpHazpWxEXPCD7v5bt6ueU0YnT3csUbzOTTvw+55JxRV
 fYz0lg4wTMRYMQMOejpx1HXwdmbVOHLUYkCxcLUaVqMnm88q/IddJVklBbPGWAU5
 Z4gFpL+FxcFhEZtu28CoubPYzf/mHDk8Ry2UWwBiRwiGoKfblomI1fpnbyrX53aE
 lpO5p7MfOVVV2WNxpbUND+ilbgKOREfRHd314GLPUjwudp2sTuDRZ1GAbt3JwsIM
 L1HesyjCtb6itCSwGsmmGsX2Wvu+WT7slpsYwHs2qklE/X1zQq0R4Jf2xUNpwqPb
 FqGZAtc6CCQtyF/Mcpp6OQd+cV0tgQVIw7teKol/xR1dSzN/+1zO1J9UHk9/dWUU
 sb5lGa/AtBrIbWxS1qLuA5bgyDqxXYDZi0y/Bu1qMHYebRW37z9kvomtzBiMNX2o
 SAxvr9iGPlTxTjGjRCyBVFmsbCMYLabNoL9tuuXvo+DnjFoOilTef+qePOv7ZYZX
 kwUyS2eu
 =FX6e
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC platform updates from Olof Johansson:
 "SoC platform changes. Main theme this merge window:

   - The Netx platform (Netx 100/500) platform is removed by Linus
     Walleij-- the SoC doesn't have active maintainers with hardware,
     and in discussions with the vendor the agreement was that it's OK
     to remove.

   - Russell King has a series of patches that cleans up and refactors
     SA1101 and RiscPC support"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  ARM: stm32: use "depends on" instead of "if" after prompt
  ARM: sa1100: convert to common clock framework
  ARM: exynos: Cleanup cppcheck shifting warning
  ARM: pxa/lubbock: remove lubbock_set_misc_wr() from global view
  ARM: exynos: Only build MCPM support if used
  arm: add missing include platform-data/atmel.h
  ARM: davinci: Use GPIO lookup table for DA850 LEDs
  ARM: OMAP2: drop explicit assembler architecture
  ARM: use arch_extension directive instead of arch argument
  ARM: imx: Switch imx7d to imx-cpufreq-dt for speed-grading
  ARM: bcm: Enable PINCTRL for ARCH_BRCMSTB
  ARM: bcm: Enable ARCH_HAS_RESET_CONTROLLER for ARCH_BRCMSTB
  ARM: riscpc: enable chained scatterlist support
  ARM: riscpc: reduce IRQ handling code
  ARM: riscpc: move RiscPC assembly files from arch/arm/lib to mach-rpc
  ARM: riscpc: parse video information from tagged list
  ARM: riscpc: add ecard quirk for Atomwide 3port serial card
  MAINTAINERS: mvebu: Add git entry
  soc: ti: pm33xx: Add a print while entering RTC only mode with DDR in self-refresh
  ARM: OMAP2+: Make some variables static
  ...
2019-07-19 17:05:08 -07:00

288 lines
6.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Support for Compaq iPAQ H3100 and H3600 handheld computers (common code)
*
* Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
* Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
*/
#include <linux/kernel.h>
#include <linux/gpio/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/platform_data/gpio-htc-egpio.h>
#include <linux/platform_data/sa11x0-serial.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <mach/h3xxx.h>
#include <mach/irqs.h>
#include "generic.h"
/*
* H3xxx flash support
*/
static struct mtd_partition h3xxx_partitions[] = {
{
.name = "H3XXX boot firmware",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_WRITEABLE, /* force read-only */
}, {
.name = "H3XXX rootfs",
.size = MTDPART_SIZ_FULL,
.offset = 0x00040000,
}
};
static void h3xxx_set_vpp(int vpp)
{
gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
}
static int h3xxx_flash_init(void)
{
int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
if (err) {
pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);
return err;
}
err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
if (err)
gpio_free(H3XXX_EGPIO_VPP_ON);
return err;
}
static void h3xxx_flash_exit(void)
{
gpio_free(H3XXX_EGPIO_VPP_ON);
}
static struct flash_platform_data h3xxx_flash_data = {
.map_name = "cfi_probe",
.set_vpp = h3xxx_set_vpp,
.init = h3xxx_flash_init,
.exit = h3xxx_flash_exit,
.parts = h3xxx_partitions,
.nr_parts = ARRAY_SIZE(h3xxx_partitions),
};
static struct resource h3xxx_flash_resource =
DEFINE_RES_MEM(SA1100_CS0_PHYS, SZ_32M);
/*
* H3xxx uart support
*/
static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
{
if (port->mapbase == _Ser3UTCR0) {
if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
gpio_free(H3XXX_EGPIO_RS232_ON);
} else {
pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",
__func__);
}
}
}
/*
* Enable/Disable wake up events for this serial port.
* Obviously, we only support this on the normal COM port.
*/
static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
{
int err = -EINVAL;
if (port->mapbase == _Ser3UTCR0) {
if (enable)
PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
else
PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
err = 0;
}
return err;
}
static struct sa1100_port_fns h3xxx_port_fns __initdata = {
.pm = h3xxx_uart_pm,
.set_wake = h3xxx_uart_set_wake,
};
static struct gpiod_lookup_table h3xxx_uart3_gpio_table = {
.dev_id = "sa11x0-uart.3",
.table = {
GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_DCD, "dcd", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_CTS, "cts", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio", H3XXX_GPIO_COM_RTS, "rts", GPIO_ACTIVE_LOW),
{ },
},
};
/*
* EGPIO
*/
static struct resource egpio_resources[] = {
[0] = DEFINE_RES_MEM(H3600_EGPIO_PHYS, 0x4),
};
static struct htc_egpio_chip egpio_chips[] = {
[0] = {
.reg_start = 0,
.gpio_base = H3XXX_EGPIO_BASE,
.num_gpios = 16,
.direction = HTC_EGPIO_OUTPUT,
.initial_values = 0x0080, /* H3XXX_EGPIO_RS232_ON */
},
};
static struct htc_egpio_platform_data egpio_info = {
.reg_width = 16,
.bus_width = 16,
.chip = egpio_chips,
.num_chips = ARRAY_SIZE(egpio_chips),
};
static struct platform_device h3xxx_egpio = {
.name = "htc-egpio",
.id = -1,
.resource = egpio_resources,
.num_resources = ARRAY_SIZE(egpio_resources),
.dev = {
.platform_data = &egpio_info,
},
};
/*
* GPIO keys
*/
static struct gpio_keys_button h3xxx_button_table[] = {
{
.code = KEY_POWER,
.gpio = H3XXX_GPIO_PWR_BUTTON,
.desc = "Power Button",
.active_low = 1,
.type = EV_KEY,
.wakeup = 1,
}, {
.code = KEY_ENTER,
.gpio = H3XXX_GPIO_ACTION_BUTTON,
.active_low = 1,
.desc = "Action button",
.type = EV_KEY,
.wakeup = 0,
},
};
static struct gpio_keys_platform_data h3xxx_keys_data = {
.buttons = h3xxx_button_table,
.nbuttons = ARRAY_SIZE(h3xxx_button_table),
};
static struct platform_device h3xxx_keys = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &h3xxx_keys_data,
},
};
static struct resource h3xxx_micro_resources[] = {
DEFINE_RES_MEM(0x80010000, SZ_4K),
DEFINE_RES_MEM(0x80020000, SZ_4K),
DEFINE_RES_IRQ(IRQ_Ser1UART),
};
struct platform_device h3xxx_micro_asic = {
.name = "ipaq-h3xxx-micro",
.id = -1,
.resource = h3xxx_micro_resources,
.num_resources = ARRAY_SIZE(h3xxx_micro_resources),
};
static struct platform_device *h3xxx_devices[] = {
&h3xxx_egpio,
&h3xxx_keys,
&h3xxx_micro_asic,
};
static struct gpiod_lookup_table h3xxx_pcmcia_gpio_table = {
.dev_id = "sa11x0-pcmcia",
.table = {
GPIO_LOOKUP("gpio", H3XXX_GPIO_PCMCIA_CD0,
"pcmcia0-detect", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio", H3XXX_GPIO_PCMCIA_IRQ0,
"pcmcia0-ready", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("gpio", H3XXX_GPIO_PCMCIA_CD1,
"pcmcia1-detect", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("gpio", H3XXX_GPIO_PCMCIA_IRQ1,
"pcmcia1-ready", GPIO_ACTIVE_HIGH),
{ },
},
};
void __init h3xxx_mach_init(void)
{
gpiod_add_lookup_table(&h3xxx_pcmcia_gpio_table);
gpiod_add_lookup_table(&h3xxx_uart3_gpio_table);
sa1100_register_uart_fns(&h3xxx_port_fns);
sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
}
static struct map_desc h3600_io_desc[] __initdata = {
{ /* static memory bank 2 CS#2 */
.virtual = H3600_BANK_2_VIRT,
.pfn = __phys_to_pfn(SA1100_CS2_PHYS),
.length = 0x02800000,
.type = MT_DEVICE
}, { /* static memory bank 4 CS#4 */
.virtual = H3600_BANK_4_VIRT,
.pfn = __phys_to_pfn(SA1100_CS4_PHYS),
.length = 0x00800000,
.type = MT_DEVICE
}, { /* EGPIO 0 CS#5 */
.virtual = H3600_EGPIO_VIRT,
.pfn = __phys_to_pfn(H3600_EGPIO_PHYS),
.length = 0x01000000,
.type = MT_DEVICE
}
};
/*
* Common map_io initialization
*/
void __init h3xxx_map_io(void)
{
sa1100_map_io();
iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
sa1100_register_uart(0, 3); /* Common serial port */
// sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
/* Ensure those pins are outputs and driving low */
PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
/* Configure suspend conditions */
PGSR = 0;
PCFR = PCFR_OPDE;
PSDR = 0;
GPCR = 0x0fffffff; /* All outputs are set low by default */
GPDR = 0; /* Configure all GPIOs as input */
}