linux-stable/lib/raid6/sse1.c
Markus Stockhausen fe5cbc6e06 md/raid6 algorithms: delta syndrome functions
v3: s-o-b comment, explanation of performance and descision for
the start/stop implementation

Implementing rmw functionality for RAID6 requires optimized syndrome
calculation. Up to now we can only generate a complete syndrome. The
target P/Q pages are always overwritten. With this patch we provide
a framework for inplace P/Q modification. In the first place simply
fill those functions with NULL values.

xor_syndrome() has two additional parameters: start & stop. These
will indicate the first and last page that are changing during a
rmw run. That makes it possible to avoid several unneccessary loops
and speed up calculation. The caller needs to implement the following
logic to make the functions work.

1) xor_syndrome(disks, start, stop, ...): "Remove" all data of source
blocks inside P/Q between (and including) start and end.

2) modify any block with start <= block <= stop

3) xor_syndrome(disks, start, stop, ...): "Reinsert" all data of
source blocks into P/Q between (and including) start and end.

Pages between start and stop that won't be changed should be filled
with a pointer to the kernel zero page. The reasons for not taking NULL
pages are:

1) Algorithms cross the whole source data line by line. Thus avoid
additional branches.

2) Having a NULL page avoids calculating the XOR P parity but still
need calulation steps for the Q parity. Depending on the algorithm
unrolling that might be only a difference of 2 instructions per loop.

The benchmark numbers of the gen_syndrome() functions are displayed in
the kernel log. Do the same for the xor_syndrome() functions. This
will help to analyze performance problems and give an rough estimate
how well the algorithm works. The choice of the fastest algorithm will
still depend on the gen_syndrome() performance.

With the start/stop page implementation the speed can vary a lot in real
life. E.g. a change of page 0 & page 15 on a stripe will be harder to
compute than the case where page 0 & page 1 are XOR candidates. To be not
to enthusiatic about the expected speeds we will run a worse case test
that simulates a change on the upper half of the stripe. So we do:

1) calculation of P/Q for the upper pages

2) continuation of Q for the lower (empty) pages

Signed-off-by: Markus Stockhausen <stockhausen@collogia.de>
Signed-off-by: NeilBrown <neilb@suse.de>
2015-04-22 08:00:41 +10:00

164 lines
4.9 KiB
C

/* -*- linux-c -*- ------------------------------------------------------- *
*
* Copyright 2002 H. Peter Anvin - All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, Inc., 53 Temple Place Ste 330,
* Boston MA 02111-1307, USA; either version 2 of the License, or
* (at your option) any later version; incorporated herein by reference.
*
* ----------------------------------------------------------------------- */
/*
* raid6/sse1.c
*
* SSE-1/MMXEXT implementation of RAID-6 syndrome functions
*
* This is really an MMX implementation, but it requires SSE-1 or
* AMD MMXEXT for prefetch support and a few other features. The
* support for nontemporal memory accesses is enough to make this
* worthwhile as a separate implementation.
*/
#ifdef CONFIG_X86_32
#include <linux/raid/pq.h>
#include "x86.h"
/* Defined in raid6/mmx.c */
extern const struct raid6_mmx_constants {
u64 x1d;
} raid6_mmx_constants;
static int raid6_have_sse1_or_mmxext(void)
{
/* Not really boot_cpu but "all_cpus" */
return boot_cpu_has(X86_FEATURE_MMX) &&
(boot_cpu_has(X86_FEATURE_XMM) ||
boot_cpu_has(X86_FEATURE_MMXEXT));
}
/*
* Plain SSE1 implementation
*/
static void raid6_sse11_gen_syndrome(int disks, size_t bytes, void **ptrs)
{
u8 **dptr = (u8 **)ptrs;
u8 *p, *q;
int d, z, z0;
z0 = disks - 3; /* Highest data disk */
p = dptr[z0+1]; /* XOR parity */
q = dptr[z0+2]; /* RS syndrome */
kernel_fpu_begin();
asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
asm volatile("pxor %mm5,%mm5"); /* Zero temp */
for ( d = 0 ; d < bytes ; d += 8 ) {
asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
asm volatile("prefetchnta %0" : : "m" (dptr[z0-1][d]));
asm volatile("movq %mm2,%mm4"); /* Q[0] */
asm volatile("movq %0,%%mm6" : : "m" (dptr[z0-1][d]));
for ( z = z0-2 ; z >= 0 ; z-- ) {
asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
asm volatile("pcmpgtb %mm4,%mm5");
asm volatile("paddb %mm4,%mm4");
asm volatile("pand %mm0,%mm5");
asm volatile("pxor %mm5,%mm4");
asm volatile("pxor %mm5,%mm5");
asm volatile("pxor %mm6,%mm2");
asm volatile("pxor %mm6,%mm4");
asm volatile("movq %0,%%mm6" : : "m" (dptr[z][d]));
}
asm volatile("pcmpgtb %mm4,%mm5");
asm volatile("paddb %mm4,%mm4");
asm volatile("pand %mm0,%mm5");
asm volatile("pxor %mm5,%mm4");
asm volatile("pxor %mm5,%mm5");
asm volatile("pxor %mm6,%mm2");
asm volatile("pxor %mm6,%mm4");
asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
}
asm volatile("sfence" : : : "memory");
kernel_fpu_end();
}
const struct raid6_calls raid6_sse1x1 = {
raid6_sse11_gen_syndrome,
NULL, /* XOR not yet implemented */
raid6_have_sse1_or_mmxext,
"sse1x1",
1 /* Has cache hints */
};
/*
* Unrolled-by-2 SSE1 implementation
*/
static void raid6_sse12_gen_syndrome(int disks, size_t bytes, void **ptrs)
{
u8 **dptr = (u8 **)ptrs;
u8 *p, *q;
int d, z, z0;
z0 = disks - 3; /* Highest data disk */
p = dptr[z0+1]; /* XOR parity */
q = dptr[z0+2]; /* RS syndrome */
kernel_fpu_begin();
asm volatile("movq %0,%%mm0" : : "m" (raid6_mmx_constants.x1d));
asm volatile("pxor %mm5,%mm5"); /* Zero temp */
asm volatile("pxor %mm7,%mm7"); /* Zero temp */
/* We uniformly assume a single prefetch covers at least 16 bytes */
for ( d = 0 ; d < bytes ; d += 16 ) {
asm volatile("prefetchnta %0" : : "m" (dptr[z0][d]));
asm volatile("movq %0,%%mm2" : : "m" (dptr[z0][d])); /* P[0] */
asm volatile("movq %0,%%mm3" : : "m" (dptr[z0][d+8])); /* P[1] */
asm volatile("movq %mm2,%mm4"); /* Q[0] */
asm volatile("movq %mm3,%mm6"); /* Q[1] */
for ( z = z0-1 ; z >= 0 ; z-- ) {
asm volatile("prefetchnta %0" : : "m" (dptr[z][d]));
asm volatile("pcmpgtb %mm4,%mm5");
asm volatile("pcmpgtb %mm6,%mm7");
asm volatile("paddb %mm4,%mm4");
asm volatile("paddb %mm6,%mm6");
asm volatile("pand %mm0,%mm5");
asm volatile("pand %mm0,%mm7");
asm volatile("pxor %mm5,%mm4");
asm volatile("pxor %mm7,%mm6");
asm volatile("movq %0,%%mm5" : : "m" (dptr[z][d]));
asm volatile("movq %0,%%mm7" : : "m" (dptr[z][d+8]));
asm volatile("pxor %mm5,%mm2");
asm volatile("pxor %mm7,%mm3");
asm volatile("pxor %mm5,%mm4");
asm volatile("pxor %mm7,%mm6");
asm volatile("pxor %mm5,%mm5");
asm volatile("pxor %mm7,%mm7");
}
asm volatile("movntq %%mm2,%0" : "=m" (p[d]));
asm volatile("movntq %%mm3,%0" : "=m" (p[d+8]));
asm volatile("movntq %%mm4,%0" : "=m" (q[d]));
asm volatile("movntq %%mm6,%0" : "=m" (q[d+8]));
}
asm volatile("sfence" : :: "memory");
kernel_fpu_end();
}
const struct raid6_calls raid6_sse1x2 = {
raid6_sse12_gen_syndrome,
NULL, /* XOR not yet implemented */
raid6_have_sse1_or_mmxext,
"sse1x2",
1 /* Has cache hints */
};
#endif