linux-stable/drivers/usb/dwc2/platform.c
Quentin Schulz ade23d7b7e usb: dwc2: power on/off phy for peripheral mode in dual-role mode
The PHY power is handled for peripheral mode but only when the device is
forced into this peripheral mode. It is missing when the device is
operating in peripheral mode when dual-role mode is enabled, so let's
update the condition to match this scenario.

Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20221206-dwc2-gadget-dual-role-v1-2-36515e1092cd@theobroma-systems.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-08 16:50:56 +01:00

733 lines
18 KiB
C

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
* platform.c - DesignWare HS OTG Controller platform driver
*
* Copyright (C) Matthijs Kooijman <matthijs@stdin.nl>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
#include <linux/of_device.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/reset.h>
#include <linux/usb/of.h>
#include "core.h"
#include "hcd.h"
#include "debug.h"
static const char dwc2_driver_name[] = "dwc2";
/*
* Check the dr_mode against the module configuration and hardware
* capabilities.
*
* The hardware, module, and dr_mode, can each be set to host, device,
* or otg. Check that all these values are compatible and adjust the
* value of dr_mode if possible.
*
* actual
* HW MOD dr_mode dr_mode
* ------------------------------
* HST HST any : HST
* HST DEV any : ---
* HST OTG any : HST
*
* DEV HST any : ---
* DEV DEV any : DEV
* DEV OTG any : DEV
*
* OTG HST any : HST
* OTG DEV any : DEV
* OTG OTG any : dr_mode
*/
static int dwc2_get_dr_mode(struct dwc2_hsotg *hsotg)
{
enum usb_dr_mode mode;
hsotg->dr_mode = usb_get_dr_mode(hsotg->dev);
if (hsotg->dr_mode == USB_DR_MODE_UNKNOWN)
hsotg->dr_mode = USB_DR_MODE_OTG;
mode = hsotg->dr_mode;
if (dwc2_hw_is_device(hsotg)) {
if (IS_ENABLED(CONFIG_USB_DWC2_HOST)) {
dev_err(hsotg->dev,
"Controller does not support host mode.\n");
return -EINVAL;
}
mode = USB_DR_MODE_PERIPHERAL;
} else if (dwc2_hw_is_host(hsotg)) {
if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL)) {
dev_err(hsotg->dev,
"Controller does not support device mode.\n");
return -EINVAL;
}
mode = USB_DR_MODE_HOST;
} else {
if (IS_ENABLED(CONFIG_USB_DWC2_HOST))
mode = USB_DR_MODE_HOST;
else if (IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL))
mode = USB_DR_MODE_PERIPHERAL;
}
if (mode != hsotg->dr_mode) {
dev_warn(hsotg->dev,
"Configuration mismatch. dr_mode forced to %s\n",
mode == USB_DR_MODE_HOST ? "host" : "device");
hsotg->dr_mode = mode;
}
return 0;
}
static void __dwc2_disable_regulators(void *data)
{
struct dwc2_hsotg *hsotg = data;
regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), hsotg->supplies);
}
static int __dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret;
ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret)
return ret;
ret = devm_add_action_or_reset(&pdev->dev,
__dwc2_disable_regulators, hsotg);
if (ret)
return ret;
if (hsotg->clk) {
ret = clk_prepare_enable(hsotg->clk);
if (ret)
return ret;
}
if (hsotg->uphy) {
ret = usb_phy_init(hsotg->uphy);
} else if (hsotg->plat && hsotg->plat->phy_init) {
ret = hsotg->plat->phy_init(pdev, hsotg->plat->phy_type);
} else {
ret = phy_init(hsotg->phy);
if (ret == 0)
ret = phy_power_on(hsotg->phy);
}
return ret;
}
/**
* dwc2_lowlevel_hw_enable - enable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_enable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_enable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = true;
return ret;
}
static int __dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
struct platform_device *pdev = to_platform_device(hsotg->dev);
int ret = 0;
if (hsotg->uphy) {
usb_phy_shutdown(hsotg->uphy);
} else if (hsotg->plat && hsotg->plat->phy_exit) {
ret = hsotg->plat->phy_exit(pdev, hsotg->plat->phy_type);
} else {
ret = phy_power_off(hsotg->phy);
if (ret == 0)
ret = phy_exit(hsotg->phy);
}
if (ret)
return ret;
if (hsotg->clk)
clk_disable_unprepare(hsotg->clk);
return 0;
}
/**
* dwc2_lowlevel_hw_disable - disable platform lowlevel hw resources
* @hsotg: The driver state
*
* A wrapper for platform code responsible for controlling
* low-level USB platform resources (phy, clock, regulators)
*/
int dwc2_lowlevel_hw_disable(struct dwc2_hsotg *hsotg)
{
int ret = __dwc2_lowlevel_hw_disable(hsotg);
if (ret == 0)
hsotg->ll_hw_enabled = false;
return ret;
}
static int dwc2_lowlevel_hw_init(struct dwc2_hsotg *hsotg)
{
int i, ret;
hsotg->reset = devm_reset_control_get_optional(hsotg->dev, "dwc2");
if (IS_ERR(hsotg->reset))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset),
"error getting reset control\n");
reset_control_deassert(hsotg->reset);
hsotg->reset_ecc = devm_reset_control_get_optional(hsotg->dev, "dwc2-ecc");
if (IS_ERR(hsotg->reset_ecc))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->reset_ecc),
"error getting reset control for ecc\n");
reset_control_deassert(hsotg->reset_ecc);
/*
* Attempt to find a generic PHY, then look for an old style
* USB PHY and then fall back to pdata
*/
hsotg->phy = devm_phy_get(hsotg->dev, "usb2-phy");
if (IS_ERR(hsotg->phy)) {
ret = PTR_ERR(hsotg->phy);
switch (ret) {
case -ENODEV:
case -ENOSYS:
hsotg->phy = NULL;
break;
default:
return dev_err_probe(hsotg->dev, ret, "error getting phy\n");
}
}
if (!hsotg->phy) {
hsotg->uphy = devm_usb_get_phy(hsotg->dev, USB_PHY_TYPE_USB2);
if (IS_ERR(hsotg->uphy)) {
ret = PTR_ERR(hsotg->uphy);
switch (ret) {
case -ENODEV:
case -ENXIO:
hsotg->uphy = NULL;
break;
default:
return dev_err_probe(hsotg->dev, ret, "error getting usb phy\n");
}
}
}
hsotg->plat = dev_get_platdata(hsotg->dev);
/* Clock */
hsotg->clk = devm_clk_get_optional(hsotg->dev, "otg");
if (IS_ERR(hsotg->clk))
return dev_err_probe(hsotg->dev, PTR_ERR(hsotg->clk), "cannot get otg clock\n");
/* Regulators */
for (i = 0; i < ARRAY_SIZE(hsotg->supplies); i++)
hsotg->supplies[i].supply = dwc2_hsotg_supply_names[i];
ret = devm_regulator_bulk_get(hsotg->dev, ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
if (ret)
return dev_err_probe(hsotg->dev, ret, "failed to request supplies\n");
return 0;
}
/**
* dwc2_driver_remove() - Called when the DWC_otg core is unregistered with the
* DWC_otg driver
*
* @dev: Platform device
*
* This routine is called, for example, when the rmmod command is executed. The
* device may or may not be electrically present. If it is present, the driver
* stops device processing. Any resources used on behalf of this device are
* freed.
*/
static int dwc2_driver_remove(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
struct dwc2_gregs_backup *gr;
int ret = 0;
gr = &hsotg->gr_backup;
/* Exit Hibernation when driver is removed. */
if (hsotg->hibernated) {
if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
ret = dwc2_exit_hibernation(hsotg, 0, 0, 1);
else
ret = dwc2_exit_hibernation(hsotg, 0, 0, 0);
if (ret)
dev_err(hsotg->dev,
"exit hibernation failed.\n");
}
/* Exit Partial Power Down when driver is removed. */
if (hsotg->in_ppd) {
ret = dwc2_exit_partial_power_down(hsotg, 0, true);
if (ret)
dev_err(hsotg->dev,
"exit partial_power_down failed\n");
}
/* Exit clock gating when driver is removed. */
if (hsotg->params.power_down == DWC2_POWER_DOWN_PARAM_NONE &&
hsotg->bus_suspended) {
if (dwc2_is_device_mode(hsotg))
dwc2_gadget_exit_clock_gating(hsotg, 0);
else
dwc2_host_exit_clock_gating(hsotg, 0);
}
dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
dwc2_drd_exit(hsotg);
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
if (hsotg->ll_hw_enabled)
dwc2_lowlevel_hw_disable(hsotg);
reset_control_assert(hsotg->reset);
reset_control_assert(hsotg->reset_ecc);
return 0;
}
/**
* dwc2_driver_shutdown() - Called on device shutdown
*
* @dev: Platform device
*
* In specific conditions (involving usb hubs) dwc2 devices can create a
* lot of interrupts, even to the point of overwhelming devices running
* at low frequencies. Some devices need to do special clock handling
* at shutdown-time which may bring the system clock below the threshold
* of being able to handle the dwc2 interrupts. Disabling dwc2-irqs
* prevents reboots/poweroffs from getting stuck in such cases.
*/
static void dwc2_driver_shutdown(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg = platform_get_drvdata(dev);
dwc2_disable_global_interrupts(hsotg);
synchronize_irq(hsotg->irq);
}
/**
* dwc2_check_core_endianness() - Returns true if core and AHB have
* opposite endianness.
* @hsotg: Programming view of the DWC_otg controller.
*/
static bool dwc2_check_core_endianness(struct dwc2_hsotg *hsotg)
{
u32 snpsid;
snpsid = ioread32(hsotg->regs + GSNPSID);
if ((snpsid & GSNPSID_ID_MASK) == DWC2_OTG_ID ||
(snpsid & GSNPSID_ID_MASK) == DWC2_FS_IOT_ID ||
(snpsid & GSNPSID_ID_MASK) == DWC2_HS_IOT_ID)
return false;
return true;
}
/**
* dwc2_check_core_version() - Check core version
*
* @hsotg: Programming view of the DWC_otg controller
*
*/
int dwc2_check_core_version(struct dwc2_hsotg *hsotg)
{
struct dwc2_hw_params *hw = &hsotg->hw_params;
/*
* Attempt to ensure this device is really a DWC_otg Controller.
* Read and verify the GSNPSID register contents. The value should be
* 0x45f4xxxx, 0x5531xxxx or 0x5532xxxx
*/
hw->snpsid = dwc2_readl(hsotg, GSNPSID);
if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
(hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
(hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
dev_err(hsotg->dev, "Bad value for GSNPSID: 0x%08x\n",
hw->snpsid);
return -ENODEV;
}
dev_dbg(hsotg->dev, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
return 0;
}
/**
* dwc2_driver_probe() - Called when the DWC_otg core is bound to the DWC_otg
* driver
*
* @dev: Platform device
*
* This routine creates the driver components required to control the device
* (core, HCD, and PCD) and initializes the device. The driver components are
* stored in a dwc2_hsotg structure. A reference to the dwc2_hsotg is saved
* in the device private data. This allows the driver to access the dwc2_hsotg
* structure on subsequent calls to driver methods for this device.
*/
static int dwc2_driver_probe(struct platform_device *dev)
{
struct dwc2_hsotg *hsotg;
struct resource *res;
int retval;
hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL);
if (!hsotg)
return -ENOMEM;
hsotg->dev = &dev->dev;
/*
* Use reasonable defaults so platforms don't have to provide these.
*/
if (!dev->dev.dma_mask)
dev->dev.dma_mask = &dev->dev.coherent_dma_mask;
retval = dma_set_coherent_mask(&dev->dev, DMA_BIT_MASK(32));
if (retval) {
dev_err(&dev->dev, "can't set coherent DMA mask: %d\n", retval);
return retval;
}
hsotg->regs = devm_platform_get_and_ioremap_resource(dev, 0, &res);
if (IS_ERR(hsotg->regs))
return PTR_ERR(hsotg->regs);
dev_dbg(&dev->dev, "mapped PA %08lx to VA %p\n",
(unsigned long)res->start, hsotg->regs);
retval = dwc2_lowlevel_hw_init(hsotg);
if (retval)
return retval;
spin_lock_init(&hsotg->lock);
hsotg->irq = platform_get_irq(dev, 0);
if (hsotg->irq < 0)
return hsotg->irq;
dev_dbg(hsotg->dev, "registering common handler for irq%d\n",
hsotg->irq);
retval = devm_request_irq(hsotg->dev, hsotg->irq,
dwc2_handle_common_intr, IRQF_SHARED,
dev_name(hsotg->dev), hsotg);
if (retval)
return retval;
hsotg->vbus_supply = devm_regulator_get_optional(hsotg->dev, "vbus");
if (IS_ERR(hsotg->vbus_supply)) {
retval = PTR_ERR(hsotg->vbus_supply);
hsotg->vbus_supply = NULL;
if (retval != -ENODEV)
return retval;
}
retval = dwc2_lowlevel_hw_enable(hsotg);
if (retval)
return retval;
hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg);
retval = dwc2_get_dr_mode(hsotg);
if (retval)
goto error;
hsotg->need_phy_for_wake =
of_property_read_bool(dev->dev.of_node,
"snps,need-phy-for-wake");
/*
* Before performing any core related operations
* check core version.
*/
retval = dwc2_check_core_version(hsotg);
if (retval)
goto error;
/*
* Reset before dwc2_get_hwparams() then it could get power-on real
* reset value form registers.
*/
retval = dwc2_core_reset(hsotg, false);
if (retval)
goto error;
/* Detect config values from hardware */
retval = dwc2_get_hwparams(hsotg);
if (retval)
goto error;
/*
* For OTG cores, set the force mode bits to reflect the value
* of dr_mode. Force mode bits should not be touched at any
* other time after this.
*/
dwc2_force_dr_mode(hsotg);
retval = dwc2_init_params(hsotg);
if (retval)
goto error;
if (hsotg->params.activate_stm_id_vb_detection) {
u32 ggpio;
hsotg->usb33d = devm_regulator_get(hsotg->dev, "usb33d");
if (IS_ERR(hsotg->usb33d)) {
retval = PTR_ERR(hsotg->usb33d);
dev_err_probe(hsotg->dev, retval, "failed to request usb33d supply\n");
goto error;
}
retval = regulator_enable(hsotg->usb33d);
if (retval) {
dev_err_probe(hsotg->dev, retval, "failed to enable usb33d supply\n");
goto error;
}
ggpio = dwc2_readl(hsotg, GGPIO);
ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
dwc2_writel(hsotg, ggpio, GGPIO);
/* ID/VBUS detection startup time */
usleep_range(5000, 7000);
}
retval = dwc2_drd_init(hsotg);
if (retval) {
dev_err_probe(hsotg->dev, retval, "failed to initialize dual-role\n");
goto error_init;
}
if (hsotg->dr_mode != USB_DR_MODE_HOST) {
retval = dwc2_gadget_init(hsotg);
if (retval)
goto error_drd;
hsotg->gadget_enabled = 1;
}
/*
* If we need PHY for wakeup we must be wakeup capable.
* When we have a device that can wake without the PHY we
* can adjust this condition.
*/
if (hsotg->need_phy_for_wake)
device_set_wakeup_capable(&dev->dev, true);
hsotg->reset_phy_on_wake =
of_property_read_bool(dev->dev.of_node,
"snps,reset-phy-on-wake");
if (hsotg->reset_phy_on_wake && !hsotg->phy) {
dev_warn(hsotg->dev,
"Quirk reset-phy-on-wake only supports generic PHYs\n");
hsotg->reset_phy_on_wake = false;
}
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL) {
retval = dwc2_hcd_init(hsotg);
if (retval) {
if (hsotg->gadget_enabled)
dwc2_hsotg_remove(hsotg);
goto error_drd;
}
hsotg->hcd_enabled = 1;
}
platform_set_drvdata(dev, hsotg);
hsotg->hibernated = 0;
dwc2_debugfs_init(hsotg);
/* Gadget code manages lowlevel hw on its own */
if (hsotg->dr_mode == USB_DR_MODE_PERIPHERAL ||
(hsotg->dr_mode == USB_DR_MODE_OTG && dwc2_is_device_mode(hsotg)))
dwc2_lowlevel_hw_disable(hsotg);
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
/* Postponed adding a new gadget to the udc class driver list */
if (hsotg->gadget_enabled) {
retval = usb_add_gadget_udc(hsotg->dev, &hsotg->gadget);
if (retval) {
hsotg->gadget.udc = NULL;
dwc2_hsotg_remove(hsotg);
goto error_debugfs;
}
}
#endif /* CONFIG_USB_DWC2_PERIPHERAL || CONFIG_USB_DWC2_DUAL_ROLE */
return 0;
#if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \
IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE)
error_debugfs:
dwc2_debugfs_exit(hsotg);
if (hsotg->hcd_enabled)
dwc2_hcd_remove(hsotg);
#endif
error_drd:
dwc2_drd_exit(hsotg);
error_init:
if (hsotg->params.activate_stm_id_vb_detection)
regulator_disable(hsotg->usb33d);
error:
if (hsotg->dr_mode != USB_DR_MODE_PERIPHERAL)
dwc2_lowlevel_hw_disable(hsotg);
return retval;
}
static int __maybe_unused dwc2_suspend(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
bool is_device_mode = dwc2_is_device_mode(dwc2);
int ret = 0;
if (is_device_mode)
dwc2_hsotg_suspend(dwc2);
dwc2_drd_suspend(dwc2);
if (dwc2->params.activate_stm_id_vb_detection) {
unsigned long flags;
u32 ggpio, gotgctl;
/*
* Need to force the mode to the current mode to avoid Mode
* Mismatch Interrupt when ID detection will be disabled.
*/
dwc2_force_mode(dwc2, !is_device_mode);
spin_lock_irqsave(&dwc2->lock, flags);
gotgctl = dwc2_readl(dwc2, GOTGCTL);
/* bypass debounce filter, enable overrides */
gotgctl |= GOTGCTL_DBNCE_FLTR_BYPASS;
gotgctl |= GOTGCTL_BVALOEN | GOTGCTL_AVALOEN;
/* Force A / B session if needed */
if (gotgctl & GOTGCTL_ASESVLD)
gotgctl |= GOTGCTL_AVALOVAL;
if (gotgctl & GOTGCTL_BSESVLD)
gotgctl |= GOTGCTL_BVALOVAL;
dwc2_writel(dwc2, gotgctl, GOTGCTL);
spin_unlock_irqrestore(&dwc2->lock, flags);
ggpio = dwc2_readl(dwc2, GGPIO);
ggpio &= ~GGPIO_STM32_OTG_GCCFG_IDEN;
ggpio &= ~GGPIO_STM32_OTG_GCCFG_VBDEN;
dwc2_writel(dwc2, ggpio, GGPIO);
regulator_disable(dwc2->usb33d);
}
if (dwc2->ll_hw_enabled &&
(is_device_mode || dwc2_host_can_poweroff_phy(dwc2))) {
ret = __dwc2_lowlevel_hw_disable(dwc2);
dwc2->phy_off_for_suspend = true;
}
return ret;
}
static int __maybe_unused dwc2_resume(struct device *dev)
{
struct dwc2_hsotg *dwc2 = dev_get_drvdata(dev);
int ret = 0;
if (dwc2->phy_off_for_suspend && dwc2->ll_hw_enabled) {
ret = __dwc2_lowlevel_hw_enable(dwc2);
if (ret)
return ret;
}
dwc2->phy_off_for_suspend = false;
if (dwc2->params.activate_stm_id_vb_detection) {
unsigned long flags;
u32 ggpio, gotgctl;
ret = regulator_enable(dwc2->usb33d);
if (ret)
return ret;
ggpio = dwc2_readl(dwc2, GGPIO);
ggpio |= GGPIO_STM32_OTG_GCCFG_IDEN;
ggpio |= GGPIO_STM32_OTG_GCCFG_VBDEN;
dwc2_writel(dwc2, ggpio, GGPIO);
/* ID/VBUS detection startup time */
usleep_range(5000, 7000);
spin_lock_irqsave(&dwc2->lock, flags);
gotgctl = dwc2_readl(dwc2, GOTGCTL);
gotgctl &= ~GOTGCTL_DBNCE_FLTR_BYPASS;
gotgctl &= ~(GOTGCTL_BVALOEN | GOTGCTL_AVALOEN |
GOTGCTL_BVALOVAL | GOTGCTL_AVALOVAL);
dwc2_writel(dwc2, gotgctl, GOTGCTL);
spin_unlock_irqrestore(&dwc2->lock, flags);
}
if (!dwc2->role_sw) {
/* Need to restore FORCEDEVMODE/FORCEHOSTMODE */
dwc2_force_dr_mode(dwc2);
} else {
dwc2_drd_resume(dwc2);
}
if (dwc2_is_device_mode(dwc2))
ret = dwc2_hsotg_resume(dwc2);
return ret;
}
static const struct dev_pm_ops dwc2_dev_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(dwc2_suspend, dwc2_resume)
};
static struct platform_driver dwc2_platform_driver = {
.driver = {
.name = dwc2_driver_name,
.of_match_table = dwc2_of_match_table,
.acpi_match_table = ACPI_PTR(dwc2_acpi_match),
.pm = &dwc2_dev_pm_ops,
},
.probe = dwc2_driver_probe,
.remove = dwc2_driver_remove,
.shutdown = dwc2_driver_shutdown,
};
module_platform_driver(dwc2_platform_driver);