mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-12 05:48:40 +00:00
![Tejun Heo](/assets/img/avatar_default.png)
Update libata LLDs to use devres. Core layer is already converted to support managed LLDs. This patch simplifies initialization and fixes many resource related bugs in init failure and detach path. For example, all converted drivers now handle ata_device_add() failure gracefully without excessive resource rollback code. As most resources are released automatically on driver detach, many drivers don't need or can do with much simpler ->{port|host}_stop(). In general, stop callbacks are need iff port or host needs to be given commands to shut it down. Note that freezing is enough in many cases and ports are automatically frozen before being detached. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
335 lines
8.6 KiB
C
335 lines
8.6 KiB
C
/*
|
|
* pata_radisys.c - Intel PATA/SATA controllers
|
|
*
|
|
* (C) 2006 Red Hat <alan@redhat.com>
|
|
*
|
|
* Some parts based on ata_piix.c by Jeff Garzik and others.
|
|
*
|
|
* A PIIX relative, this device has a single ATA channel and no
|
|
* slave timings, SITRE or PPE. In that sense it is a close relative
|
|
* of the original PIIX. It does however support UDMA 33/66 per channel
|
|
* although no other modes/timings. Also lacking is 32bit I/O on the ATA
|
|
* port.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/ata.h>
|
|
|
|
#define DRV_NAME "pata_radisys"
|
|
#define DRV_VERSION "0.4.1"
|
|
|
|
/**
|
|
* radisys_probe_init - probe begin
|
|
* @ap: ATA port
|
|
*
|
|
* Set up cable type and use generic probe init
|
|
*/
|
|
|
|
static int radisys_pre_reset(struct ata_port *ap)
|
|
{
|
|
ap->cbl = ATA_CBL_PATA80;
|
|
return ata_std_prereset(ap);
|
|
}
|
|
|
|
|
|
/**
|
|
* radisys_pata_error_handler - Probe specified port on PATA host controller
|
|
* @ap: Port to probe
|
|
* @classes:
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void radisys_pata_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_bmdma_drive_eh(ap, radisys_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
|
|
}
|
|
|
|
/**
|
|
* radisys_set_piomode - Initialize host controller PATA PIO timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: um
|
|
*
|
|
* Set PIO mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void radisys_set_piomode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
unsigned int pio = adev->pio_mode - XFER_PIO_0;
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
u16 idetm_data;
|
|
int control = 0;
|
|
|
|
/*
|
|
* See Intel Document 298600-004 for the timing programing rules
|
|
* for PIIX/ICH. Note that the early PIIX does not have the slave
|
|
* timing port at 0x44. The Radisys is a relative of the PIIX
|
|
* but not the same so be careful.
|
|
*/
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 }, /* Check me */
|
|
{ 0, 0 },
|
|
{ 1, 1 },
|
|
{ 2, 2 },
|
|
{ 3, 3 }, };
|
|
|
|
if (pio > 0)
|
|
control |= 1; /* TIME1 enable */
|
|
if (ata_pio_need_iordy(adev))
|
|
control |= 2; /* IE IORDY */
|
|
|
|
pci_read_config_word(dev, 0x40, &idetm_data);
|
|
|
|
/* Enable IE and TIME as appropriate. Clear the other
|
|
drive timing bits */
|
|
idetm_data &= 0xCCCC;
|
|
idetm_data |= (control << (4 * adev->devno));
|
|
idetm_data |= (timings[pio][0] << 12) |
|
|
(timings[pio][1] << 8);
|
|
pci_write_config_word(dev, 0x40, idetm_data);
|
|
|
|
/* Track which port is configured */
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* radisys_set_dmamode - Initialize host controller PATA DMA timings
|
|
* @ap: Port whose timings we are configuring
|
|
* @adev: Device to program
|
|
* @isich: True if the device is an ICH and has IOCFG registers
|
|
*
|
|
* Set MWDMA mode for device, in host controller PCI config space.
|
|
*
|
|
* LOCKING:
|
|
* None (inherited from caller).
|
|
*/
|
|
|
|
static void radisys_set_dmamode (struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
struct pci_dev *dev = to_pci_dev(ap->host->dev);
|
|
u16 idetm_data;
|
|
u8 udma_enable;
|
|
|
|
static const /* ISP RTC */
|
|
u8 timings[][2] = { { 0, 0 },
|
|
{ 0, 0 },
|
|
{ 1, 1 },
|
|
{ 2, 2 },
|
|
{ 3, 3 }, };
|
|
|
|
/*
|
|
* MWDMA is driven by the PIO timings. We must also enable
|
|
* IORDY unconditionally.
|
|
*/
|
|
|
|
pci_read_config_word(dev, 0x40, &idetm_data);
|
|
pci_read_config_byte(dev, 0x48, &udma_enable);
|
|
|
|
if (adev->dma_mode < XFER_UDMA_0) {
|
|
unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0;
|
|
const unsigned int needed_pio[3] = {
|
|
XFER_PIO_0, XFER_PIO_3, XFER_PIO_4
|
|
};
|
|
int pio = needed_pio[mwdma] - XFER_PIO_0;
|
|
int control = 3; /* IORDY|TIME0 */
|
|
|
|
/* If the drive MWDMA is faster than it can do PIO then
|
|
we must force PIO0 for PIO cycles. */
|
|
|
|
if (adev->pio_mode < needed_pio[mwdma])
|
|
control = 1;
|
|
|
|
/* Mask out the relevant control and timing bits we will load. Also
|
|
clear the other drive TIME register as a precaution */
|
|
|
|
idetm_data &= 0xCCCC;
|
|
idetm_data |= control << (4 * adev->devno);
|
|
idetm_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
|
|
|
|
udma_enable &= ~(1 << adev->devno);
|
|
} else {
|
|
u8 udma_mode;
|
|
|
|
/* UDMA66 on: UDMA 33 and 66 are switchable via register 0x4A */
|
|
|
|
pci_read_config_byte(dev, 0x4A, &udma_mode);
|
|
|
|
if (adev->xfer_mode == XFER_UDMA_2)
|
|
udma_mode &= ~ (1 << adev->devno);
|
|
else /* UDMA 4 */
|
|
udma_mode |= (1 << adev->devno);
|
|
|
|
pci_write_config_byte(dev, 0x4A, udma_mode);
|
|
|
|
udma_enable |= (1 << adev->devno);
|
|
}
|
|
pci_write_config_word(dev, 0x40, idetm_data);
|
|
pci_write_config_byte(dev, 0x48, udma_enable);
|
|
|
|
/* Track which port is configured */
|
|
ap->private_data = adev;
|
|
}
|
|
|
|
/**
|
|
* radisys_qc_issue_prot - command issue
|
|
* @qc: command pending
|
|
*
|
|
* Called when the libata layer is about to issue a command. We wrap
|
|
* this interface so that we can load the correct ATA timings if
|
|
* neccessary. Our logic also clears TIME0/TIME1 for the other device so
|
|
* that, even if we get this wrong, cycles to the other device will
|
|
* be made PIO0.
|
|
*/
|
|
|
|
static unsigned int radisys_qc_issue_prot(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct ata_device *adev = qc->dev;
|
|
|
|
if (adev != ap->private_data) {
|
|
/* UDMA timing is not shared */
|
|
if (adev->dma_mode < XFER_UDMA_0) {
|
|
if (adev->dma_mode)
|
|
radisys_set_dmamode(ap, adev);
|
|
else if (adev->pio_mode)
|
|
radisys_set_piomode(ap, adev);
|
|
}
|
|
}
|
|
return ata_qc_issue_prot(qc);
|
|
}
|
|
|
|
|
|
static struct scsi_host_template radisys_sht = {
|
|
.module = THIS_MODULE,
|
|
.name = DRV_NAME,
|
|
.ioctl = ata_scsi_ioctl,
|
|
.queuecommand = ata_scsi_queuecmd,
|
|
.can_queue = ATA_DEF_QUEUE,
|
|
.this_id = ATA_SHT_THIS_ID,
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
|
|
.emulated = ATA_SHT_EMULATED,
|
|
.use_clustering = ATA_SHT_USE_CLUSTERING,
|
|
.proc_name = DRV_NAME,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
.slave_configure = ata_scsi_slave_config,
|
|
.slave_destroy = ata_scsi_slave_destroy,
|
|
.bios_param = ata_std_bios_param,
|
|
.resume = ata_scsi_device_resume,
|
|
.suspend = ata_scsi_device_suspend,
|
|
};
|
|
|
|
static const struct ata_port_operations radisys_pata_ops = {
|
|
.port_disable = ata_port_disable,
|
|
.set_piomode = radisys_set_piomode,
|
|
.set_dmamode = radisys_set_dmamode,
|
|
.mode_filter = ata_pci_default_filter,
|
|
|
|
.tf_load = ata_tf_load,
|
|
.tf_read = ata_tf_read,
|
|
.check_status = ata_check_status,
|
|
.exec_command = ata_exec_command,
|
|
.dev_select = ata_std_dev_select,
|
|
|
|
.freeze = ata_bmdma_freeze,
|
|
.thaw = ata_bmdma_thaw,
|
|
.error_handler = radisys_pata_error_handler,
|
|
.post_internal_cmd = ata_bmdma_post_internal_cmd,
|
|
|
|
.bmdma_setup = ata_bmdma_setup,
|
|
.bmdma_start = ata_bmdma_start,
|
|
.bmdma_stop = ata_bmdma_stop,
|
|
.bmdma_status = ata_bmdma_status,
|
|
.qc_prep = ata_qc_prep,
|
|
.qc_issue = radisys_qc_issue_prot,
|
|
.data_xfer = ata_pio_data_xfer,
|
|
|
|
.irq_handler = ata_interrupt,
|
|
.irq_clear = ata_bmdma_irq_clear,
|
|
|
|
.port_start = ata_port_start,
|
|
};
|
|
|
|
|
|
/**
|
|
* radisys_init_one - Register PIIX ATA PCI device with kernel services
|
|
* @pdev: PCI device to register
|
|
* @ent: Entry in radisys_pci_tbl matching with @pdev
|
|
*
|
|
* Called from kernel PCI layer. We probe for combined mode (sigh),
|
|
* and then hand over control to libata, for it to do the rest.
|
|
*
|
|
* LOCKING:
|
|
* Inherited from PCI layer (may sleep).
|
|
*
|
|
* RETURNS:
|
|
* Zero on success, or -ERRNO value.
|
|
*/
|
|
|
|
static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
static struct ata_port_info info = {
|
|
.sht = &radisys_sht,
|
|
.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
|
|
.pio_mask = 0x1f, /* pio0-4 */
|
|
.mwdma_mask = 0x07, /* mwdma1-2 */
|
|
.udma_mask = 0x14, /* UDMA33/66 only */
|
|
.port_ops = &radisys_pata_ops,
|
|
};
|
|
static struct ata_port_info *port_info[2] = { &info, &info };
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"version " DRV_VERSION "\n");
|
|
|
|
return ata_pci_init_one(pdev, port_info, 2);
|
|
}
|
|
|
|
static const struct pci_device_id radisys_pci_tbl[] = {
|
|
{ PCI_VDEVICE(RADISYS, 0x8201), },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver radisys_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = radisys_pci_tbl,
|
|
.probe = radisys_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = ata_pci_device_resume,
|
|
};
|
|
|
|
static int __init radisys_init(void)
|
|
{
|
|
return pci_register_driver(&radisys_pci_driver);
|
|
}
|
|
|
|
static void __exit radisys_exit(void)
|
|
{
|
|
pci_unregister_driver(&radisys_pci_driver);
|
|
}
|
|
|
|
module_init(radisys_init);
|
|
module_exit(radisys_exit);
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("SCSI low-level driver for Radisys R82600 controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, radisys_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|