linux-stable/drivers/usb/renesas_usbhs/common.c
Lad Prabhakar 22ae6415c7 usb: renesas_usbhs: Use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.

In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq().

Drop irqflags member from struct usbhs_priv as this driver is used by
two non DT users sh7757lcr and ecovec24 which do not pass
IORESOURCE_IRQ_SHAREABLE as part of their pdata. Along this drop the
IRQF_SHARED flag handling in the code.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20211220010411.12075-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-21 08:51:57 +01:00

836 lines
19 KiB
C

// SPDX-License-Identifier: GPL-1.0+
/*
* Renesas USB driver
*
* Copyright (C) 2011 Renesas Solutions Corp.
* Copyright (C) 2019 Renesas Electronics Corporation
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/slab.h>
#include <linux/sysfs.h>
#include "common.h"
#include "rcar2.h"
#include "rcar3.h"
#include "rza.h"
/*
* image of renesas_usbhs
*
* ex) gadget case
* mod.c
* mod_gadget.c
* mod_host.c pipe.c fifo.c
*
* +-------+ +-----------+
* | pipe0 |------>| fifo pio |
* +------------+ +-------+ +-----------+
* | mod_gadget |=====> | pipe1 |--+
* +------------+ +-------+ | +-----------+
* | pipe2 | | +-| fifo dma0 |
* +------------+ +-------+ | | +-----------+
* | mod_host | | pipe3 |<-|--+
* +------------+ +-------+ | +-----------+
* | .... | +--->| fifo dma1 |
* | .... | +-----------+
*/
/*
* platform call back
*
* renesas usb support platform callback function.
* Below macro call it.
* if platform doesn't have callback, it return 0 (no error)
*/
#define usbhs_platform_call(priv, func, args...)\
(!(priv) ? -ENODEV : \
!((priv)->pfunc->func) ? 0 : \
(priv)->pfunc->func(args))
/*
* common functions
*/
u16 usbhs_read(struct usbhs_priv *priv, u32 reg)
{
return ioread16(priv->base + reg);
}
void usbhs_write(struct usbhs_priv *priv, u32 reg, u16 data)
{
iowrite16(data, priv->base + reg);
}
void usbhs_bset(struct usbhs_priv *priv, u32 reg, u16 mask, u16 data)
{
u16 val = usbhs_read(priv, reg);
val &= ~mask;
val |= data & mask;
usbhs_write(priv, reg, val);
}
struct usbhs_priv *usbhs_pdev_to_priv(struct platform_device *pdev)
{
return dev_get_drvdata(&pdev->dev);
}
int usbhs_get_id_as_gadget(struct platform_device *pdev)
{
return USBHS_GADGET;
}
/*
* syscfg functions
*/
static void usbhs_sys_clock_ctrl(struct usbhs_priv *priv, int enable)
{
usbhs_bset(priv, SYSCFG, SCKE, enable ? SCKE : 0);
}
void usbhs_sys_host_ctrl(struct usbhs_priv *priv, int enable)
{
u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
u16 val = DCFM | DRPD | HSE | USBE;
/*
* if enable
*
* - select Host mode
* - D+ Line/D- Line Pull-down
*/
usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
}
void usbhs_sys_function_ctrl(struct usbhs_priv *priv, int enable)
{
u16 mask = DCFM | DRPD | DPRPU | HSE | USBE;
u16 val = HSE | USBE;
/* CNEN bit is required for function operation */
if (usbhs_get_dparam(priv, has_cnen)) {
mask |= CNEN;
val |= CNEN;
}
/*
* if enable
*
* - select Function mode
* - D+ Line Pull-up is disabled
* When D+ Line Pull-up is enabled,
* calling usbhs_sys_function_pullup(,1)
*/
usbhs_bset(priv, SYSCFG, mask, enable ? val : 0);
}
void usbhs_sys_function_pullup(struct usbhs_priv *priv, int enable)
{
usbhs_bset(priv, SYSCFG, DPRPU, enable ? DPRPU : 0);
}
void usbhs_sys_set_test_mode(struct usbhs_priv *priv, u16 mode)
{
usbhs_write(priv, TESTMODE, mode);
}
/*
* frame functions
*/
int usbhs_frame_get_num(struct usbhs_priv *priv)
{
return usbhs_read(priv, FRMNUM) & FRNM_MASK;
}
/*
* usb request functions
*/
void usbhs_usbreq_get_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
{
u16 val;
val = usbhs_read(priv, USBREQ);
req->bRequest = (val >> 8) & 0xFF;
req->bRequestType = (val >> 0) & 0xFF;
req->wValue = cpu_to_le16(usbhs_read(priv, USBVAL));
req->wIndex = cpu_to_le16(usbhs_read(priv, USBINDX));
req->wLength = cpu_to_le16(usbhs_read(priv, USBLENG));
}
void usbhs_usbreq_set_val(struct usbhs_priv *priv, struct usb_ctrlrequest *req)
{
usbhs_write(priv, USBREQ, (req->bRequest << 8) | req->bRequestType);
usbhs_write(priv, USBVAL, le16_to_cpu(req->wValue));
usbhs_write(priv, USBINDX, le16_to_cpu(req->wIndex));
usbhs_write(priv, USBLENG, le16_to_cpu(req->wLength));
usbhs_bset(priv, DCPCTR, SUREQ, SUREQ);
}
/*
* bus/vbus functions
*/
void usbhs_bus_send_sof_enable(struct usbhs_priv *priv)
{
u16 status = usbhs_read(priv, DVSTCTR) & (USBRST | UACT);
if (status != USBRST) {
struct device *dev = usbhs_priv_to_dev(priv);
dev_err(dev, "usbhs should be reset\n");
}
usbhs_bset(priv, DVSTCTR, (USBRST | UACT), UACT);
}
void usbhs_bus_send_reset(struct usbhs_priv *priv)
{
usbhs_bset(priv, DVSTCTR, (USBRST | UACT), USBRST);
}
int usbhs_bus_get_speed(struct usbhs_priv *priv)
{
u16 dvstctr = usbhs_read(priv, DVSTCTR);
switch (RHST & dvstctr) {
case RHST_LOW_SPEED:
return USB_SPEED_LOW;
case RHST_FULL_SPEED:
return USB_SPEED_FULL;
case RHST_HIGH_SPEED:
return USB_SPEED_HIGH;
}
return USB_SPEED_UNKNOWN;
}
int usbhs_vbus_ctrl(struct usbhs_priv *priv, int enable)
{
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
return usbhs_platform_call(priv, set_vbus, pdev, enable);
}
static void usbhsc_bus_init(struct usbhs_priv *priv)
{
usbhs_write(priv, DVSTCTR, 0);
usbhs_vbus_ctrl(priv, 0);
}
/*
* device configuration
*/
int usbhs_set_device_config(struct usbhs_priv *priv, int devnum,
u16 upphub, u16 hubport, u16 speed)
{
struct device *dev = usbhs_priv_to_dev(priv);
u16 usbspd = 0;
u32 reg = DEVADD0 + (2 * devnum);
if (devnum > 10) {
dev_err(dev, "cannot set speed to unknown device %d\n", devnum);
return -EIO;
}
if (upphub > 0xA) {
dev_err(dev, "unsupported hub number %d\n", upphub);
return -EIO;
}
switch (speed) {
case USB_SPEED_LOW:
usbspd = USBSPD_SPEED_LOW;
break;
case USB_SPEED_FULL:
usbspd = USBSPD_SPEED_FULL;
break;
case USB_SPEED_HIGH:
usbspd = USBSPD_SPEED_HIGH;
break;
default:
dev_err(dev, "unsupported speed %d\n", speed);
return -EIO;
}
usbhs_write(priv, reg, UPPHUB(upphub) |
HUBPORT(hubport)|
USBSPD(usbspd));
return 0;
}
/*
* interrupt functions
*/
void usbhs_xxxsts_clear(struct usbhs_priv *priv, u16 sts_reg, u16 bit)
{
u16 pipe_mask = (u16)GENMASK(usbhs_get_dparam(priv, pipe_size), 0);
usbhs_write(priv, sts_reg, ~(1 << bit) & pipe_mask);
}
/*
* local functions
*/
static void usbhsc_set_buswait(struct usbhs_priv *priv)
{
int wait = usbhs_get_dparam(priv, buswait_bwait);
/* set bus wait if platform have */
if (wait)
usbhs_bset(priv, BUSWAIT, 0x000F, wait);
}
static bool usbhsc_is_multi_clks(struct usbhs_priv *priv)
{
return priv->dparam.multi_clks;
}
static int usbhsc_clk_get(struct device *dev, struct usbhs_priv *priv)
{
if (!usbhsc_is_multi_clks(priv))
return 0;
/* The first clock should exist */
priv->clks[0] = of_clk_get(dev_of_node(dev), 0);
if (IS_ERR(priv->clks[0]))
return PTR_ERR(priv->clks[0]);
/*
* To backward compatibility with old DT, this driver checks the return
* value if it's -ENOENT or not.
*/
priv->clks[1] = of_clk_get(dev_of_node(dev), 1);
if (PTR_ERR(priv->clks[1]) == -ENOENT)
priv->clks[1] = NULL;
else if (IS_ERR(priv->clks[1]))
return PTR_ERR(priv->clks[1]);
return 0;
}
static void usbhsc_clk_put(struct usbhs_priv *priv)
{
int i;
if (!usbhsc_is_multi_clks(priv))
return;
for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
clk_put(priv->clks[i]);
}
static int usbhsc_clk_prepare_enable(struct usbhs_priv *priv)
{
int i, ret;
if (!usbhsc_is_multi_clks(priv))
return 0;
for (i = 0; i < ARRAY_SIZE(priv->clks); i++) {
ret = clk_prepare_enable(priv->clks[i]);
if (ret) {
while (--i >= 0)
clk_disable_unprepare(priv->clks[i]);
return ret;
}
}
return ret;
}
static void usbhsc_clk_disable_unprepare(struct usbhs_priv *priv)
{
int i;
if (!usbhsc_is_multi_clks(priv))
return;
for (i = 0; i < ARRAY_SIZE(priv->clks); i++)
clk_disable_unprepare(priv->clks[i]);
}
/*
* platform default param
*/
/* commonly used on old SH-Mobile SoCs */
static struct renesas_usbhs_driver_pipe_config usbhsc_default_pipe[] = {
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x18, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x28, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x38, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x07, false),
};
/* commonly used on newer SH-Mobile and R-Car SoCs */
static struct renesas_usbhs_driver_pipe_config usbhsc_new_pipe[] = {
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_CONTROL, 64, 0x00, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x08, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_ISOC, 1024, 0x28, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x48, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x58, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x68, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x04, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x05, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_INT, 64, 0x06, false),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x78, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x88, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0x98, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xa8, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xb8, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xc8, true),
RENESAS_USBHS_PIPE(USB_ENDPOINT_XFER_BULK, 512, 0xd8, true),
};
/*
* power control
*/
static void usbhsc_power_ctrl(struct usbhs_priv *priv, int enable)
{
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
struct device *dev = usbhs_priv_to_dev(priv);
if (enable) {
/* enable PM */
pm_runtime_get_sync(dev);
/* enable clks */
if (usbhsc_clk_prepare_enable(priv))
return;
/* enable platform power */
usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
/* USB on */
usbhs_sys_clock_ctrl(priv, enable);
} else {
/* USB off */
usbhs_sys_clock_ctrl(priv, enable);
/* disable platform power */
usbhs_platform_call(priv, power_ctrl, pdev, priv->base, enable);
/* disable clks */
usbhsc_clk_disable_unprepare(priv);
/* disable PM */
pm_runtime_put_sync(dev);
}
}
/*
* hotplug
*/
static void usbhsc_hotplug(struct usbhs_priv *priv)
{
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
int id;
int enable;
int cable;
int ret;
/*
* get vbus status from platform
*/
enable = usbhs_mod_info_call(priv, get_vbus, pdev);
/*
* get id from platform
*/
id = usbhs_platform_call(priv, get_id, pdev);
if (enable && !mod) {
if (priv->edev) {
cable = extcon_get_state(priv->edev, EXTCON_USB_HOST);
if ((cable > 0 && id != USBHS_HOST) ||
(!cable && id != USBHS_GADGET)) {
dev_info(&pdev->dev,
"USB cable plugged in doesn't match the selected role!\n");
return;
}
}
ret = usbhs_mod_change(priv, id);
if (ret < 0)
return;
dev_dbg(&pdev->dev, "%s enable\n", __func__);
/* power on */
if (usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, enable);
/* bus init */
usbhsc_set_buswait(priv);
usbhsc_bus_init(priv);
/* module start */
usbhs_mod_call(priv, start, priv);
} else if (!enable && mod) {
dev_dbg(&pdev->dev, "%s disable\n", __func__);
/* module stop */
usbhs_mod_call(priv, stop, priv);
/* bus init */
usbhsc_bus_init(priv);
/* power off */
if (usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, enable);
usbhs_mod_change(priv, -1);
/* reset phy for next connection */
usbhs_platform_call(priv, phy_reset, pdev);
}
}
/*
* notify hotplug
*/
static void usbhsc_notify_hotplug(struct work_struct *work)
{
struct usbhs_priv *priv = container_of(work,
struct usbhs_priv,
notify_hotplug_work.work);
usbhsc_hotplug(priv);
}
int usbhsc_schedule_notify_hotplug(struct platform_device *pdev)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
int delay = usbhs_get_dparam(priv, detection_delay);
/*
* This functions will be called in interrupt.
* To make sure safety context,
* use workqueue for usbhs_notify_hotplug
*/
schedule_delayed_work(&priv->notify_hotplug_work,
msecs_to_jiffies(delay));
return 0;
}
/*
* platform functions
*/
static const struct of_device_id usbhs_of_match[] = {
{
.compatible = "renesas,usbhs-r8a774c0",
.data = &usbhs_rcar_gen3_with_pll_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7790",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7791",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7794",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7795",
.data = &usbhs_rcar_gen3_plat_info,
},
{
.compatible = "renesas,usbhs-r8a7796",
.data = &usbhs_rcar_gen3_plat_info,
},
{
.compatible = "renesas,usbhs-r8a77990",
.data = &usbhs_rcar_gen3_with_pll_plat_info,
},
{
.compatible = "renesas,usbhs-r8a77995",
.data = &usbhs_rcar_gen3_with_pll_plat_info,
},
{
.compatible = "renesas,rcar-gen2-usbhs",
.data = &usbhs_rcar_gen2_plat_info,
},
{
.compatible = "renesas,rcar-gen3-usbhs",
.data = &usbhs_rcar_gen3_plat_info,
},
{
.compatible = "renesas,rza1-usbhs",
.data = &usbhs_rza1_plat_info,
},
{
.compatible = "renesas,rza2-usbhs",
.data = &usbhs_rza2_plat_info,
},
{ },
};
MODULE_DEVICE_TABLE(of, usbhs_of_match);
static int usbhs_probe(struct platform_device *pdev)
{
const struct renesas_usbhs_platform_info *info;
struct usbhs_priv *priv;
struct device *dev = &pdev->dev;
struct gpio_desc *gpiod;
int ret;
u32 tmp;
int irq;
/* check device node */
if (dev_of_node(dev))
info = of_device_get_match_data(dev);
else
info = renesas_usbhs_get_info(pdev);
/* check platform information */
if (!info) {
dev_err(dev, "no platform information\n");
return -EINVAL;
}
/* platform data */
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return irq;
/* usb private data */
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
if (of_property_read_bool(dev_of_node(dev), "extcon")) {
priv->edev = extcon_get_edev_by_phandle(dev, 0);
if (IS_ERR(priv->edev))
return PTR_ERR(priv->edev);
}
priv->rsts = devm_reset_control_array_get_optional_shared(dev);
if (IS_ERR(priv->rsts))
return PTR_ERR(priv->rsts);
/*
* care platform info
*/
priv->dparam = info->driver_param;
if (!info->platform_callback.get_id) {
dev_err(dev, "no platform callbacks\n");
return -EINVAL;
}
priv->pfunc = &info->platform_callback;
/* set default param if platform doesn't have */
if (usbhs_get_dparam(priv, has_new_pipe_configs)) {
priv->dparam.pipe_configs = usbhsc_new_pipe;
priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_new_pipe);
} else if (!priv->dparam.pipe_configs) {
priv->dparam.pipe_configs = usbhsc_default_pipe;
priv->dparam.pipe_size = ARRAY_SIZE(usbhsc_default_pipe);
}
if (!priv->dparam.pio_dma_border)
priv->dparam.pio_dma_border = 64; /* 64byte */
if (!of_property_read_u32(dev_of_node(dev), "renesas,buswait", &tmp))
priv->dparam.buswait_bwait = tmp;
gpiod = devm_gpiod_get_optional(dev, "renesas,enable", GPIOD_IN);
if (IS_ERR(gpiod))
return PTR_ERR(gpiod);
/* FIXME */
/* runtime power control ? */
if (priv->pfunc->get_vbus)
usbhs_get_dparam(priv, runtime_pwctrl) = 1;
/*
* priv settings
*/
priv->irq = irq;
priv->pdev = pdev;
INIT_DELAYED_WORK(&priv->notify_hotplug_work, usbhsc_notify_hotplug);
spin_lock_init(usbhs_priv_to_lock(priv));
/* call pipe and module init */
ret = usbhs_pipe_probe(priv);
if (ret < 0)
return ret;
ret = usbhs_fifo_probe(priv);
if (ret < 0)
goto probe_end_pipe_exit;
ret = usbhs_mod_probe(priv);
if (ret < 0)
goto probe_end_fifo_exit;
/* dev_set_drvdata should be called after usbhs_mod_init */
platform_set_drvdata(pdev, priv);
ret = reset_control_deassert(priv->rsts);
if (ret)
goto probe_fail_rst;
ret = usbhsc_clk_get(dev, priv);
if (ret)
goto probe_fail_clks;
/*
* deviece reset here because
* USB device might be used in boot loader.
*/
usbhs_sys_clock_ctrl(priv, 0);
/* check GPIO determining if USB function should be enabled */
if (gpiod) {
ret = !gpiod_get_value(gpiod);
if (ret) {
dev_warn(dev, "USB function not selected (GPIO)\n");
ret = -ENOTSUPP;
goto probe_end_mod_exit;
}
}
/*
* platform call
*
* USB phy setup might depend on CPU/Board.
* If platform has its callback functions,
* call it here.
*/
ret = usbhs_platform_call(priv, hardware_init, pdev);
if (ret < 0) {
dev_err(dev, "platform init failed.\n");
goto probe_end_mod_exit;
}
/* reset phy for connection */
usbhs_platform_call(priv, phy_reset, pdev);
/* power control */
pm_runtime_enable(dev);
if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
usbhsc_power_ctrl(priv, 1);
usbhs_mod_autonomy_mode(priv);
} else {
usbhs_mod_non_autonomy_mode(priv);
}
/*
* manual call notify_hotplug for cold plug
*/
usbhsc_schedule_notify_hotplug(pdev);
dev_info(dev, "probed\n");
return ret;
probe_end_mod_exit:
usbhsc_clk_put(priv);
probe_fail_clks:
reset_control_assert(priv->rsts);
probe_fail_rst:
usbhs_mod_remove(priv);
probe_end_fifo_exit:
usbhs_fifo_remove(priv);
probe_end_pipe_exit:
usbhs_pipe_remove(priv);
dev_info(dev, "probe failed (%d)\n", ret);
return ret;
}
static int usbhs_remove(struct platform_device *pdev)
{
struct usbhs_priv *priv = usbhs_pdev_to_priv(pdev);
dev_dbg(&pdev->dev, "usb remove\n");
/* power off */
if (!usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, 0);
pm_runtime_disable(&pdev->dev);
usbhs_platform_call(priv, hardware_exit, pdev);
usbhsc_clk_put(priv);
reset_control_assert(priv->rsts);
usbhs_mod_remove(priv);
usbhs_fifo_remove(priv);
usbhs_pipe_remove(priv);
return 0;
}
static __maybe_unused int usbhsc_suspend(struct device *dev)
{
struct usbhs_priv *priv = dev_get_drvdata(dev);
struct usbhs_mod *mod = usbhs_mod_get_current(priv);
if (mod) {
usbhs_mod_call(priv, stop, priv);
usbhs_mod_change(priv, -1);
}
if (mod || !usbhs_get_dparam(priv, runtime_pwctrl))
usbhsc_power_ctrl(priv, 0);
return 0;
}
static __maybe_unused int usbhsc_resume(struct device *dev)
{
struct usbhs_priv *priv = dev_get_drvdata(dev);
struct platform_device *pdev = usbhs_priv_to_pdev(priv);
if (!usbhs_get_dparam(priv, runtime_pwctrl)) {
usbhsc_power_ctrl(priv, 1);
usbhs_mod_autonomy_mode(priv);
}
usbhs_platform_call(priv, phy_reset, pdev);
usbhsc_schedule_notify_hotplug(pdev);
return 0;
}
static SIMPLE_DEV_PM_OPS(usbhsc_pm_ops, usbhsc_suspend, usbhsc_resume);
static struct platform_driver renesas_usbhs_driver = {
.driver = {
.name = "renesas_usbhs",
.pm = &usbhsc_pm_ops,
.of_match_table = of_match_ptr(usbhs_of_match),
},
.probe = usbhs_probe,
.remove = usbhs_remove,
};
module_platform_driver(renesas_usbhs_driver);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Renesas USB driver");
MODULE_AUTHOR("Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>");