mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-11-01 17:08:10 +00:00
79d2c8bede
The touchpad in the Asus laptop models X505BA/BP and X542BA/BP is unresponsive after suspend/resume. The following error appears during resume: i2c_hid i2c-ELAN1300:00: failed to reset device. The problem here is that i2c_hid does not notice the interrupt being generated at this point, because the GPIO is no longer configured for interrupts. Fix this by saving pinctrl-amd pin registers during suspend and restoring them at resume time. Based on code from pinctrl-intel. Cc: stable@vger.kernel.org Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
264 lines
6.6 KiB
C
264 lines
6.6 KiB
C
/*
|
|
* GPIO driver for AMD
|
|
*
|
|
* Copyright (c) 2014,2015 Ken Xue <Ken.Xue@amd.com>
|
|
* Jeff Wu <Jeff.Wu@amd.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#ifndef _PINCTRL_AMD_H
|
|
#define _PINCTRL_AMD_H
|
|
|
|
#define AMD_GPIO_PINS_PER_BANK 64
|
|
|
|
#define AMD_GPIO_PINS_BANK0 63
|
|
#define AMD_GPIO_PINS_BANK1 64
|
|
#define AMD_GPIO_PINS_BANK2 56
|
|
#define AMD_GPIO_PINS_BANK3 32
|
|
|
|
#define WAKE_INT_MASTER_REG 0xfc
|
|
#define EOI_MASK (1 << 29)
|
|
|
|
#define WAKE_INT_STATUS_REG0 0x2f8
|
|
#define WAKE_INT_STATUS_REG1 0x2fc
|
|
|
|
#define DB_TMR_OUT_OFF 0
|
|
#define DB_TMR_OUT_UNIT_OFF 4
|
|
#define DB_CNTRL_OFF 5
|
|
#define DB_TMR_LARGE_OFF 7
|
|
#define LEVEL_TRIG_OFF 8
|
|
#define ACTIVE_LEVEL_OFF 9
|
|
#define INTERRUPT_ENABLE_OFF 11
|
|
#define INTERRUPT_MASK_OFF 12
|
|
#define WAKE_CNTRL_OFF_S0I3 13
|
|
#define WAKE_CNTRL_OFF_S3 14
|
|
#define WAKE_CNTRL_OFF_S4 15
|
|
#define PIN_STS_OFF 16
|
|
#define DRV_STRENGTH_SEL_OFF 17
|
|
#define PULL_UP_SEL_OFF 19
|
|
#define PULL_UP_ENABLE_OFF 20
|
|
#define PULL_DOWN_ENABLE_OFF 21
|
|
#define OUTPUT_VALUE_OFF 22
|
|
#define OUTPUT_ENABLE_OFF 23
|
|
#define SW_CNTRL_IN_OFF 24
|
|
#define SW_CNTRL_EN_OFF 25
|
|
#define INTERRUPT_STS_OFF 28
|
|
#define WAKE_STS_OFF 29
|
|
|
|
#define DB_TMR_OUT_MASK 0xFUL
|
|
#define DB_CNTRl_MASK 0x3UL
|
|
#define ACTIVE_LEVEL_MASK 0x3UL
|
|
#define DRV_STRENGTH_SEL_MASK 0x3UL
|
|
|
|
#define DB_TYPE_NO_DEBOUNCE 0x0UL
|
|
#define DB_TYPE_PRESERVE_LOW_GLITCH 0x1UL
|
|
#define DB_TYPE_PRESERVE_HIGH_GLITCH 0x2UL
|
|
#define DB_TYPE_REMOVE_GLITCH 0x3UL
|
|
|
|
#define EDGE_TRAGGER 0x0UL
|
|
#define LEVEL_TRIGGER 0x1UL
|
|
|
|
#define ACTIVE_HIGH 0x0UL
|
|
#define ACTIVE_LOW 0x1UL
|
|
#define BOTH_EADGE 0x2UL
|
|
|
|
#define ENABLE_INTERRUPT 0x1UL
|
|
#define DISABLE_INTERRUPT 0x0UL
|
|
|
|
#define ENABLE_INTERRUPT_MASK 0x0UL
|
|
#define DISABLE_INTERRUPT_MASK 0x1UL
|
|
|
|
#define CLR_INTR_STAT 0x1UL
|
|
|
|
struct amd_pingroup {
|
|
const char *name;
|
|
const unsigned *pins;
|
|
unsigned npins;
|
|
};
|
|
|
|
struct amd_function {
|
|
const char *name;
|
|
const char * const *groups;
|
|
unsigned ngroups;
|
|
};
|
|
|
|
struct amd_gpio {
|
|
raw_spinlock_t lock;
|
|
void __iomem *base;
|
|
|
|
const struct amd_pingroup *groups;
|
|
u32 ngroups;
|
|
struct pinctrl_dev *pctrl;
|
|
struct gpio_chip gc;
|
|
unsigned int hwbank_num;
|
|
struct resource *res;
|
|
struct platform_device *pdev;
|
|
u32 *saved_regs;
|
|
};
|
|
|
|
/* KERNCZ configuration*/
|
|
static const struct pinctrl_pin_desc kerncz_pins[] = {
|
|
PINCTRL_PIN(0, "GPIO_0"),
|
|
PINCTRL_PIN(1, "GPIO_1"),
|
|
PINCTRL_PIN(2, "GPIO_2"),
|
|
PINCTRL_PIN(3, "GPIO_3"),
|
|
PINCTRL_PIN(4, "GPIO_4"),
|
|
PINCTRL_PIN(5, "GPIO_5"),
|
|
PINCTRL_PIN(6, "GPIO_6"),
|
|
PINCTRL_PIN(7, "GPIO_7"),
|
|
PINCTRL_PIN(8, "GPIO_8"),
|
|
PINCTRL_PIN(9, "GPIO_9"),
|
|
PINCTRL_PIN(10, "GPIO_10"),
|
|
PINCTRL_PIN(11, "GPIO_11"),
|
|
PINCTRL_PIN(12, "GPIO_12"),
|
|
PINCTRL_PIN(13, "GPIO_13"),
|
|
PINCTRL_PIN(14, "GPIO_14"),
|
|
PINCTRL_PIN(15, "GPIO_15"),
|
|
PINCTRL_PIN(16, "GPIO_16"),
|
|
PINCTRL_PIN(17, "GPIO_17"),
|
|
PINCTRL_PIN(18, "GPIO_18"),
|
|
PINCTRL_PIN(19, "GPIO_19"),
|
|
PINCTRL_PIN(20, "GPIO_20"),
|
|
PINCTRL_PIN(23, "GPIO_23"),
|
|
PINCTRL_PIN(24, "GPIO_24"),
|
|
PINCTRL_PIN(25, "GPIO_25"),
|
|
PINCTRL_PIN(26, "GPIO_26"),
|
|
PINCTRL_PIN(39, "GPIO_39"),
|
|
PINCTRL_PIN(40, "GPIO_40"),
|
|
PINCTRL_PIN(43, "GPIO_42"),
|
|
PINCTRL_PIN(46, "GPIO_46"),
|
|
PINCTRL_PIN(47, "GPIO_47"),
|
|
PINCTRL_PIN(48, "GPIO_48"),
|
|
PINCTRL_PIN(49, "GPIO_49"),
|
|
PINCTRL_PIN(50, "GPIO_50"),
|
|
PINCTRL_PIN(51, "GPIO_51"),
|
|
PINCTRL_PIN(52, "GPIO_52"),
|
|
PINCTRL_PIN(53, "GPIO_53"),
|
|
PINCTRL_PIN(54, "GPIO_54"),
|
|
PINCTRL_PIN(55, "GPIO_55"),
|
|
PINCTRL_PIN(56, "GPIO_56"),
|
|
PINCTRL_PIN(57, "GPIO_57"),
|
|
PINCTRL_PIN(58, "GPIO_58"),
|
|
PINCTRL_PIN(59, "GPIO_59"),
|
|
PINCTRL_PIN(60, "GPIO_60"),
|
|
PINCTRL_PIN(61, "GPIO_61"),
|
|
PINCTRL_PIN(62, "GPIO_62"),
|
|
PINCTRL_PIN(64, "GPIO_64"),
|
|
PINCTRL_PIN(65, "GPIO_65"),
|
|
PINCTRL_PIN(66, "GPIO_66"),
|
|
PINCTRL_PIN(68, "GPIO_68"),
|
|
PINCTRL_PIN(69, "GPIO_69"),
|
|
PINCTRL_PIN(70, "GPIO_70"),
|
|
PINCTRL_PIN(71, "GPIO_71"),
|
|
PINCTRL_PIN(72, "GPIO_72"),
|
|
PINCTRL_PIN(74, "GPIO_74"),
|
|
PINCTRL_PIN(75, "GPIO_75"),
|
|
PINCTRL_PIN(76, "GPIO_76"),
|
|
PINCTRL_PIN(84, "GPIO_84"),
|
|
PINCTRL_PIN(85, "GPIO_85"),
|
|
PINCTRL_PIN(86, "GPIO_86"),
|
|
PINCTRL_PIN(87, "GPIO_87"),
|
|
PINCTRL_PIN(88, "GPIO_88"),
|
|
PINCTRL_PIN(89, "GPIO_89"),
|
|
PINCTRL_PIN(90, "GPIO_90"),
|
|
PINCTRL_PIN(91, "GPIO_91"),
|
|
PINCTRL_PIN(92, "GPIO_92"),
|
|
PINCTRL_PIN(93, "GPIO_93"),
|
|
PINCTRL_PIN(95, "GPIO_95"),
|
|
PINCTRL_PIN(96, "GPIO_96"),
|
|
PINCTRL_PIN(97, "GPIO_97"),
|
|
PINCTRL_PIN(98, "GPIO_98"),
|
|
PINCTRL_PIN(99, "GPIO_99"),
|
|
PINCTRL_PIN(100, "GPIO_100"),
|
|
PINCTRL_PIN(101, "GPIO_101"),
|
|
PINCTRL_PIN(102, "GPIO_102"),
|
|
PINCTRL_PIN(113, "GPIO_113"),
|
|
PINCTRL_PIN(114, "GPIO_114"),
|
|
PINCTRL_PIN(115, "GPIO_115"),
|
|
PINCTRL_PIN(116, "GPIO_116"),
|
|
PINCTRL_PIN(117, "GPIO_117"),
|
|
PINCTRL_PIN(118, "GPIO_118"),
|
|
PINCTRL_PIN(119, "GPIO_119"),
|
|
PINCTRL_PIN(120, "GPIO_120"),
|
|
PINCTRL_PIN(121, "GPIO_121"),
|
|
PINCTRL_PIN(122, "GPIO_122"),
|
|
PINCTRL_PIN(126, "GPIO_126"),
|
|
PINCTRL_PIN(129, "GPIO_129"),
|
|
PINCTRL_PIN(130, "GPIO_130"),
|
|
PINCTRL_PIN(131, "GPIO_131"),
|
|
PINCTRL_PIN(132, "GPIO_132"),
|
|
PINCTRL_PIN(133, "GPIO_133"),
|
|
PINCTRL_PIN(135, "GPIO_135"),
|
|
PINCTRL_PIN(136, "GPIO_136"),
|
|
PINCTRL_PIN(137, "GPIO_137"),
|
|
PINCTRL_PIN(138, "GPIO_138"),
|
|
PINCTRL_PIN(139, "GPIO_139"),
|
|
PINCTRL_PIN(140, "GPIO_140"),
|
|
PINCTRL_PIN(141, "GPIO_141"),
|
|
PINCTRL_PIN(142, "GPIO_142"),
|
|
PINCTRL_PIN(143, "GPIO_143"),
|
|
PINCTRL_PIN(144, "GPIO_144"),
|
|
PINCTRL_PIN(145, "GPIO_145"),
|
|
PINCTRL_PIN(146, "GPIO_146"),
|
|
PINCTRL_PIN(147, "GPIO_147"),
|
|
PINCTRL_PIN(148, "GPIO_148"),
|
|
PINCTRL_PIN(166, "GPIO_166"),
|
|
PINCTRL_PIN(167, "GPIO_167"),
|
|
PINCTRL_PIN(168, "GPIO_168"),
|
|
PINCTRL_PIN(169, "GPIO_169"),
|
|
PINCTRL_PIN(170, "GPIO_170"),
|
|
PINCTRL_PIN(171, "GPIO_171"),
|
|
PINCTRL_PIN(172, "GPIO_172"),
|
|
PINCTRL_PIN(173, "GPIO_173"),
|
|
PINCTRL_PIN(174, "GPIO_174"),
|
|
PINCTRL_PIN(175, "GPIO_175"),
|
|
PINCTRL_PIN(176, "GPIO_176"),
|
|
PINCTRL_PIN(177, "GPIO_177"),
|
|
};
|
|
|
|
static const unsigned i2c0_pins[] = {145, 146};
|
|
static const unsigned i2c1_pins[] = {147, 148};
|
|
static const unsigned i2c2_pins[] = {113, 114};
|
|
static const unsigned i2c3_pins[] = {19, 20};
|
|
|
|
static const unsigned uart0_pins[] = {135, 136, 137, 138, 139};
|
|
static const unsigned uart1_pins[] = {140, 141, 142, 143, 144};
|
|
|
|
static const struct amd_pingroup kerncz_groups[] = {
|
|
{
|
|
.name = "i2c0",
|
|
.pins = i2c0_pins,
|
|
.npins = 2,
|
|
},
|
|
{
|
|
.name = "i2c1",
|
|
.pins = i2c1_pins,
|
|
.npins = 2,
|
|
},
|
|
{
|
|
.name = "i2c2",
|
|
.pins = i2c2_pins,
|
|
.npins = 2,
|
|
},
|
|
{
|
|
.name = "i2c3",
|
|
.pins = i2c3_pins,
|
|
.npins = 2,
|
|
},
|
|
{
|
|
.name = "uart0",
|
|
.pins = uart0_pins,
|
|
.npins = 9,
|
|
},
|
|
{
|
|
.name = "uart1",
|
|
.pins = uart1_pins,
|
|
.npins = 5,
|
|
},
|
|
};
|
|
|
|
#endif
|