mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-09-28 21:33:52 +00:00
630ea3108a
The clock controller driver has provided the XTAL clock so far. This does not match how the hardware actually works because the XTAL clock is an actual crystal which is mounted on the PCB. Add the "xtal" clock to meson.dtsi and replace all references to the clock controller's CLKID_XTAL with the new xtal clock node. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Kevin Hilman <khilman@baylibre.com>
415 lines
8.8 KiB
Text
415 lines
8.8 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (c) 2018 Martin Blumenstingl <martin.blumenstingl@googlemail.com>.
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
|
|
#include "meson8b.dtsi"
|
|
|
|
/ {
|
|
model = "Endless Computers Endless Mini";
|
|
compatible = "endless,ec100", "amlogic,meson8b";
|
|
|
|
aliases {
|
|
serial0 = &uart_AO;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x40000000 0x40000000>;
|
|
};
|
|
|
|
gpio-keys {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <100>;
|
|
|
|
pal-switch {
|
|
label = "pal";
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <KEY_SWITCHVIDEOMODE>;
|
|
gpios = <&gpio GPIOH_7 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
ntsc-switch {
|
|
label = "ntsc";
|
|
linux,input-type = <EV_SW>;
|
|
linux,code = <KEY_SWITCHVIDEOMODE>;
|
|
gpios = <&gpio GPIOH_8 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
|
|
power-button {
|
|
label = "power";
|
|
linux,code = <KEY_POWER>;
|
|
gpios = <&gpio GPIOH_9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
gpio-poweroff {
|
|
compatible = "gpio-poweroff";
|
|
/*
|
|
* shutdown is managed by the EC (embedded micro-controller)
|
|
* which is configured through GPIOAO_2 (poweroff GPIO) and
|
|
* GPIOAO_7 (power LED, which has to go LOW as well).
|
|
*/
|
|
gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>;
|
|
timeout-ms = <20000>;
|
|
};
|
|
|
|
iio-hwmon {
|
|
compatible = "iio-hwmon";
|
|
io-channels = <&saradc 8>;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
power {
|
|
label = "ec100:red:power";
|
|
/*
|
|
* Needs to go LOW (together with the poweroff GPIO)
|
|
* during shutdown to allow the EC (embedded
|
|
* micro-controller) to shutdown the system. Setting
|
|
* the output to LOW signals the EC to start a
|
|
* "breathing"/pulsing effect until the power is fully
|
|
* turned off.
|
|
*/
|
|
gpios = <&gpio_ao GPIOAO_7 GPIO_ACTIVE_HIGH>;
|
|
default-state = "on";
|
|
};
|
|
};
|
|
|
|
rtc32k_xtal: rtc32k-xtal-clk {
|
|
/* X2 in the schematics */
|
|
compatible = "fixed-clock";
|
|
clock-frequency = <32768>;
|
|
clock-output-names = "RTC32K";
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
usb_vbus: regulator-usb-vbus {
|
|
/*
|
|
* Silergy SY6288CCAC-GP 2A Power Distribution Switch.
|
|
*/
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "USB_VBUS";
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
vin-supply = <&vcc_5v>;
|
|
|
|
/*
|
|
* signal name from the schematics: USB_PWR_EN
|
|
*/
|
|
gpio = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
};
|
|
|
|
vcc_5v: regulator-vcc5v {
|
|
/*
|
|
* supplied by the main power input which called PWR_5V_STB
|
|
* in the schematics
|
|
*/
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VCC5V";
|
|
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
|
|
/*
|
|
* signal name from the schematics: 3V3_5V_EN
|
|
*/
|
|
gpio = <&gpio GPIODV_29 GPIO_ACTIVE_LOW>;
|
|
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcck: regulator-vcck {
|
|
/*
|
|
* Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
|
|
* Synchronous Step Down Regulator.
|
|
*/
|
|
compatible = "pwm-regulator";
|
|
|
|
regulator-name = "VCCK";
|
|
regulator-min-microvolt = <860000>;
|
|
regulator-max-microvolt = <1140000>;
|
|
|
|
vin-supply = <&vcc_5v>;
|
|
|
|
pwms = <&pwm_cd 0 1148 0>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_1v8: regulator-vcc1v8 {
|
|
/*
|
|
* ABLIC S-1339D18-M5001-GP
|
|
*/
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VCC1V8";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
|
|
vin-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
vcc_3v3: regulator-vcc3v3 {
|
|
/*
|
|
* Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
|
|
* Synchronous Step Down Regulator. Also called
|
|
* VDDIO_AO3.3V in the schematics.
|
|
*/
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VCC3V3";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
|
|
vin-supply = <&vcc_5v>;
|
|
};
|
|
|
|
vcc_ddr3: regulator-vcc-ddr3 {
|
|
/*
|
|
* Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
|
|
* Synchronous Step Down Regulator. Also called
|
|
* DDR3_1.5V in the schematics.
|
|
*/
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VCC_DDR3_1V5";
|
|
regulator-min-microvolt = <1500000>;
|
|
regulator-max-microvolt = <1500000>;
|
|
|
|
vin-supply = <&vcc_5v>;
|
|
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vcc_rtc: regulator-vcc-rtc {
|
|
/*
|
|
* Global Mixed-mode Technology Inc. G918T12U-GP
|
|
*/
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "VCC_RTC";
|
|
regulator-min-microvolt = <900000>;
|
|
regulator-max-microvolt = <900000>;
|
|
|
|
/*
|
|
* When the board is powered then the input is VCC3V3,
|
|
* otherwise power is taken from the coin cell battery.
|
|
*/
|
|
vin-supply = <&vcc_3v3>;
|
|
};
|
|
|
|
vddee: regulator-vddee {
|
|
/*
|
|
* Silergy SY8089AAC-GP 2A continuous, 3A peak, 1MHz
|
|
* Synchronous Step Down Regulator. Also called VDDAO
|
|
* in a part of the schematics.
|
|
*/
|
|
compatible = "pwm-regulator";
|
|
|
|
regulator-name = "VDDEE";
|
|
regulator-min-microvolt = <860000>;
|
|
regulator-max-microvolt = <1140000>;
|
|
|
|
vin-supply = <&vcc_5v>;
|
|
|
|
pwms = <&pwm_cd 1 1148 0>;
|
|
pwm-dutycycle-range = <100 0>;
|
|
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&cpu0 {
|
|
cpu-supply = <&vcck>;
|
|
};
|
|
|
|
ðmac {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <ð_rmii_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
phy-handle = <ð_phy0>;
|
|
phy-mode = "rmii";
|
|
|
|
mdio {
|
|
compatible = "snps,dwmac-mdio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
eth_phy0: ethernet-phy@0 {
|
|
/* IC Plus IP101A/G (0x02430c54) */
|
|
reg = <0>;
|
|
|
|
reset-assert-us = <10000>;
|
|
reset-deassert-us = <10000>;
|
|
reset-gpios = <&gpio GPIOH_4 GPIO_ACTIVE_LOW>;
|
|
|
|
icplus,select-interrupt;
|
|
interrupt-parent = <&gpio_intc>;
|
|
/* GPIOH_3 */
|
|
interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&i2c_A {
|
|
status = "okay";
|
|
pinctrl-0 = <&i2c_a_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
rt5640: codec@1c {
|
|
compatible = "realtek,rt5640";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&gpio_intc>;
|
|
interrupts = <13 IRQ_TYPE_EDGE_BOTH>; /* GPIOAO_13 */
|
|
realtek,in1-differential;
|
|
};
|
|
};
|
|
|
|
&mali {
|
|
mali-supply = <&vddee>;
|
|
};
|
|
|
|
&saradc {
|
|
status = "okay";
|
|
vref-supply = <&vcc_1v8>;
|
|
};
|
|
|
|
&sdio {
|
|
status = "okay";
|
|
|
|
pinctrl-0 = <&sd_b_pins>;
|
|
pinctrl-names = "default";
|
|
|
|
/* SD card */
|
|
sd_card_slot: slot@1 {
|
|
compatible = "mmc-slot";
|
|
reg = <1>;
|
|
status = "okay";
|
|
|
|
bus-width = <4>;
|
|
no-sdio;
|
|
cap-mmc-highspeed;
|
|
cap-sd-highspeed;
|
|
disable-wp;
|
|
|
|
cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>;
|
|
|
|
vmmc-supply = <&vcc_3v3>;
|
|
};
|
|
};
|
|
|
|
&gpio_ao {
|
|
gpio-line-names = "Linux_TX", "Linux_RX",
|
|
"SLP_S5_N", "USB2_OC_FLAG#",
|
|
"HUB_RST", "USB_PWR_EN",
|
|
"I2S_IN", "SLP_S1_N",
|
|
"TCK", "TMS", "TDI", "TDO",
|
|
"HDMI_CEC", "5640_IRQ",
|
|
"MUTE", "S805_TEST#";
|
|
};
|
|
|
|
&gpio {
|
|
gpio-line-names = /* Bank GPIOX */
|
|
"WIFI_SD_D0", "WIFI_SD_D1", "WIFI_SD_D2",
|
|
"WIFI_SD_D3", "BTPCM_DOUT", "BTPCM_DIN",
|
|
"BTPCM_SYNC", "BTPCM_CLK", "WIFI_SD_CLK",
|
|
"WIFI_SD_CMD", "WIFI_32K", "WIFI_PWREN",
|
|
"UART_B_TX", "UART_B_RX", "UART_B_CTS_N",
|
|
"UART_B_RTS_N", "BT_EN", "WIFI_WAKE_HOST",
|
|
/* Bank GPIOY */
|
|
"", "", "", "", "", "", "", "", "", "",
|
|
"", "",
|
|
/* Bank GPIODV */
|
|
"VCCK_PWM_C", "I2C_SDA_A", "I2C_SCL_A",
|
|
"I2C_SDA_B", "I2C_SCL_B", "VDDEE_PWM_D",
|
|
"VDDEE_PWM 3V3_5V_EN",
|
|
/* Bank GPIOH */
|
|
"HDMI_HPD", "HDMI_I2C_SDA", "HDMI_I2C_SCL",
|
|
"RMII_IRQ", "RMII_RST#", "RMII_TXD1",
|
|
"RMII_TXD0", "AV_select_1", "AV_select_2",
|
|
"MCU_Control_S",
|
|
/* Bank CARD */
|
|
"SD_D1_B", "SD_D0_B", "SD_CLK_8726MX",
|
|
"SD_CMD_8726MX", "SD_D3_B", "SD_D2_B",
|
|
"CARD_EN_DET (CARD_DET)",
|
|
/* Bank BOOT */
|
|
"NAND_D0 (EMMC)", "NAND_D1 (EMMC)",
|
|
"NAND_D2 (EMMC)", "NAND_D3 (EMMC)",
|
|
"NAND_D4 (EMMC)", "NAND_D5 (EMMC)",
|
|
"NAND_D6 (EMMC)", "NAND_D7 (EMMC)",
|
|
"NAND_CS1 (EMMC)", "NAND_CS2 iNAND_RS1 (EMMC)",
|
|
"NAND_nR/B iNAND_CMD (EMMC)", "NAND_ALE (EMMC)",
|
|
"NAND_CLE (EMMC)", "nRE_S1 NAND_nRE (EMMC)",
|
|
"nWE_S1 NAND_nWE (EMMC)", "", "", "SPI_CS",
|
|
/* Bank DIF */
|
|
"RMII_RXD1", "RMII_RXD0", "RMII_CRS_DV",
|
|
"RMII_50M_IN", "GPIODIF_4", "GPIODIF_5",
|
|
"RMII_TXEN", "CPUETH_25MOUT", "RMII_MDC",
|
|
"RMII_MDIO";
|
|
};
|
|
|
|
&pwm_cd {
|
|
status = "okay";
|
|
pinctrl-0 = <&pwm_c1_pins>, <&pwm_d_pins>;
|
|
pinctrl-names = "default";
|
|
clocks = <&xtal>, <&xtal>;
|
|
clock-names = "clkin0", "clkin1";
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
clocks = <&rtc32k_xtal>;
|
|
vdd-supply = <&vcc_rtc>;
|
|
};
|
|
|
|
/* exposed through the pin headers labeled "URDUG1" on the top of the PCB */
|
|
&uart_AO {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_ao_a_pins>;
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
/*
|
|
* connected to the Bluetooth part of the RTL8723BS SDIO wifi / Bluetooth
|
|
* combo chip. This is only available on the variant with 2GB RAM.
|
|
*/
|
|
&uart_B {
|
|
status = "okay";
|
|
pinctrl-0 = <&uart_b0_pins>, <&uart_b0_cts_rts_pins>;
|
|
pinctrl-names = "default";
|
|
uart-has-rtscts;
|
|
};
|
|
|
|
&usb1 {
|
|
status = "okay";
|
|
vbus-supply = <&usb_vbus>;
|
|
};
|
|
|
|
&usb1_phy {
|
|
status = "okay";
|
|
};
|