linux-stable/sound/soc/pxa/pxa-ssp.c
Daniel Mack 273b72c8ce ASoC: pxa-ssp: atomically set stream active masks
PXA's SSP engine fails to take its current channel phase into account
when enabling a stream while the engine is already running. This
results in randomly swapped left/right channels on either the record
or the playback side, depending on which one was enabled first.

The following patch fixes this by factoring out the bit field
modifications in question to a separate function that pauses the
engine temporarily, modifies the bits and kicks it off again
afterwards. Appearantly, a transition of SSCR0_SSE syncs both
directions properly.

The patch has been rolled out to quite a number of devices over the
last weeks and seems to fix the issue reliably.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-and-tested-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
2012-03-19 12:47:25 +00:00

845 lines
20 KiB
C

/*
* pxa-ssp.c -- ALSA Soc Audio Layer
*
* Copyright 2005,2008 Wolfson Microelectronics PLC.
* Author: Liam Girdwood
* Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
* TODO:
* o Test network mode for > 16bit sample size
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/pxa2xx_ssp.h>
#include <asm/irq.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/initval.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/pxa2xx-lib.h>
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/audio.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"
/*
* SSP audio private data
*/
struct ssp_priv {
struct ssp_device *ssp;
unsigned int sysclk;
int dai_fmt;
#ifdef CONFIG_PM
uint32_t cr0;
uint32_t cr1;
uint32_t to;
uint32_t psp;
#endif
};
static void dump_registers(struct ssp_device *ssp)
{
dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
pxa_ssp_read_reg(ssp, SSTO));
dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
pxa_ssp_read_reg(ssp, SSACD));
}
static void pxa_ssp_enable(struct ssp_device *ssp)
{
uint32_t sscr0;
sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE;
__raw_writel(sscr0, ssp->mmio_base + SSCR0);
}
static void pxa_ssp_disable(struct ssp_device *ssp)
{
uint32_t sscr0;
sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE;
__raw_writel(sscr0, ssp->mmio_base + SSCR0);
}
struct pxa2xx_pcm_dma_data {
struct pxa2xx_pcm_dma_params params;
char name[20];
};
static struct pxa2xx_pcm_dma_params *
pxa_ssp_get_dma_params(struct ssp_device *ssp, int width4, int out)
{
struct pxa2xx_pcm_dma_data *dma;
dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
if (dma == NULL)
return NULL;
snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
width4 ? "32-bit" : "16-bit", out ? "out" : "in");
dma->params.name = dma->name;
dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
(DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
(width4 ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
dma->params.dev_addr = ssp->phys_base + SSDR;
return &dma->params;
}
static int pxa_ssp_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
int ret = 0;
if (!cpu_dai->active) {
clk_enable(ssp->clk);
pxa_ssp_disable(ssp);
}
kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
return ret;
}
static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
if (!cpu_dai->active) {
pxa_ssp_disable(ssp);
clk_disable(ssp->clk);
}
kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
}
#ifdef CONFIG_PM
static int pxa_ssp_suspend(struct snd_soc_dai *cpu_dai)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
if (!cpu_dai->active)
clk_enable(ssp->clk);
priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
priv->to = __raw_readl(ssp->mmio_base + SSTO);
priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
pxa_ssp_disable(ssp);
clk_disable(ssp->clk);
return 0;
}
static int pxa_ssp_resume(struct snd_soc_dai *cpu_dai)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
clk_enable(ssp->clk);
__raw_writel(sssr, ssp->mmio_base + SSSR);
__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
__raw_writel(priv->to, ssp->mmio_base + SSTO);
__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
if (cpu_dai->active)
pxa_ssp_enable(ssp);
else
clk_disable(ssp->clk);
return 0;
}
#else
#define pxa_ssp_suspend NULL
#define pxa_ssp_resume NULL
#endif
/**
* ssp_set_clkdiv - set SSP clock divider
* @div: serial clock rate divider
*/
static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div)
{
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
sscr0 &= ~0x0000ff00;
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
} else {
sscr0 &= ~0x000fff00;
sscr0 |= (div - 1) << 8; /* 1..4096 */
}
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
}
/**
* pxa_ssp_get_clkdiv - get SSP clock divider
*/
static u32 pxa_ssp_get_scr(struct ssp_device *ssp)
{
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
u32 div;
if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
div = ((sscr0 >> 8) & 0xff) * 2 + 2;
else
div = ((sscr0 >> 8) & 0xfff) + 1;
return div;
}
/*
* Set the SSP ports SYSCLK.
*/
static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
int clk_id, unsigned int freq, int dir)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
int val;
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
dev_dbg(&ssp->pdev->dev,
"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
cpu_dai->id, clk_id, freq);
switch (clk_id) {
case PXA_SSP_CLK_NET_PLL:
sscr0 |= SSCR0_MOD;
break;
case PXA_SSP_CLK_PLL:
/* Internal PLL is fixed */
if (cpu_is_pxa25x())
priv->sysclk = 1843200;
else
priv->sysclk = 13000000;
break;
case PXA_SSP_CLK_EXT:
priv->sysclk = freq;
sscr0 |= SSCR0_ECS;
break;
case PXA_SSP_CLK_NET:
priv->sysclk = freq;
sscr0 |= SSCR0_NCS | SSCR0_MOD;
break;
case PXA_SSP_CLK_AUDIO:
priv->sysclk = 0;
pxa_ssp_set_scr(ssp, 1);
sscr0 |= SSCR0_ACS;
break;
default:
return -ENODEV;
}
/* The SSP clock must be disabled when changing SSP clock mode
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
if (!cpu_is_pxa3xx())
clk_disable(ssp->clk);
val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
pxa_ssp_write_reg(ssp, SSCR0, val);
if (!cpu_is_pxa3xx())
clk_enable(ssp->clk);
return 0;
}
/*
* Set the SSP clock dividers.
*/
static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai,
int div_id, int div)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
int val;
switch (div_id) {
case PXA_SSP_AUDIO_DIV_ACDS:
val = (pxa_ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div);
pxa_ssp_write_reg(ssp, SSACD, val);
break;
case PXA_SSP_AUDIO_DIV_SCDB:
val = pxa_ssp_read_reg(ssp, SSACD);
val &= ~SSACD_SCDB;
#if defined(CONFIG_PXA3xx)
if (cpu_is_pxa3xx())
val &= ~SSACD_SCDX8;
#endif
switch (div) {
case PXA_SSP_CLK_SCDB_1:
val |= SSACD_SCDB;
break;
case PXA_SSP_CLK_SCDB_4:
break;
#if defined(CONFIG_PXA3xx)
case PXA_SSP_CLK_SCDB_8:
if (cpu_is_pxa3xx())
val |= SSACD_SCDX8;
else
return -EINVAL;
break;
#endif
default:
return -EINVAL;
}
pxa_ssp_write_reg(ssp, SSACD, val);
break;
case PXA_SSP_DIV_SCR:
pxa_ssp_set_scr(ssp, div);
break;
default:
return -ENODEV;
}
return 0;
}
/*
* Configure the PLL frequency pxa27x and (afaik - pxa320 only)
*/
static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, int pll_id,
int source, unsigned int freq_in, unsigned int freq_out)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
#if defined(CONFIG_PXA3xx)
if (cpu_is_pxa3xx())
pxa_ssp_write_reg(ssp, SSACDD, 0);
#endif
switch (freq_out) {
case 5622000:
break;
case 11345000:
ssacd |= (0x1 << 4);
break;
case 12235000:
ssacd |= (0x2 << 4);
break;
case 14857000:
ssacd |= (0x3 << 4);
break;
case 32842000:
ssacd |= (0x4 << 4);
break;
case 48000000:
ssacd |= (0x5 << 4);
break;
case 0:
/* Disable */
break;
default:
#ifdef CONFIG_PXA3xx
/* PXA3xx has a clock ditherer which can be used to generate
* a wider range of frequencies - calculate a value for it.
*/
if (cpu_is_pxa3xx()) {
u32 val;
u64 tmp = 19968;
tmp *= 1000000;
do_div(tmp, freq_out);
val = tmp;
val = (val << 16) | 64;
pxa_ssp_write_reg(ssp, SSACDD, val);
ssacd |= (0x6 << 4);
dev_dbg(&ssp->pdev->dev,
"Using SSACDD %x to supply %uHz\n",
val, freq_out);
break;
}
#endif
return -EINVAL;
}
pxa_ssp_write_reg(ssp, SSACD, ssacd);
return 0;
}
/*
* Set the active slots in TDM/Network mode
*/
static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
u32 sscr0;
sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
/* set slot width */
if (slot_width > 16)
sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
else
sscr0 |= SSCR0_DataSize(slot_width);
if (slots > 1) {
/* enable network mode */
sscr0 |= SSCR0_MOD;
/* set number of active slots */
sscr0 |= SSCR0_SlotsPerFrm(slots);
/* set active slot mask */
pxa_ssp_write_reg(ssp, SSTSA, tx_mask);
pxa_ssp_write_reg(ssp, SSRSA, rx_mask);
}
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
return 0;
}
/*
* Tristate the SSP DAI lines
*/
static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
int tristate)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
u32 sscr1;
sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
if (tristate)
sscr1 &= ~SSCR1_TTE;
else
sscr1 |= SSCR1_TTE;
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
return 0;
}
/*
* Set up the SSP DAI format.
* The SSP Port must be inactive before calling this function as the
* physical interface format is changed.
*/
static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
unsigned int fmt)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
u32 sscr0, sscr1, sspsp, scfr;
/* check if we need to change anything at all */
if (priv->dai_fmt == fmt)
return 0;
/* we can only change the settings if the port is not in use */
if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) {
dev_err(&ssp->pdev->dev,
"can't change hardware dai format: stream is in use");
return -EINVAL;
}
/* reset port settings */
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
sspsp = 0;
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR;
break;
case SND_SOC_DAIFMT_CBM_CFS:
sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR;
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
sspsp |= SSPSP_SFRMP;
break;
case SND_SOC_DAIFMT_NB_IF:
break;
case SND_SOC_DAIFMT_IB_IF:
sspsp |= SSPSP_SCMODE(2);
break;
case SND_SOC_DAIFMT_IB_NF:
sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
sscr0 |= SSCR0_PSP;
sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
/* See hw_params() */
break;
case SND_SOC_DAIFMT_DSP_A:
sspsp |= SSPSP_FSRT;
case SND_SOC_DAIFMT_DSP_B:
sscr0 |= SSCR0_MOD | SSCR0_PSP;
sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
break;
default:
return -EINVAL;
}
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
case SND_SOC_DAIFMT_CBM_CFS:
scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR;
pxa_ssp_write_reg(ssp, SSCR1, scfr);
while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY)
cpu_relax();
break;
}
dump_registers(ssp);
/* Since we are configuring the timings for the format by hand
* we have to defer some things until hw_params() where we
* know parameters like the sample size.
*/
priv->dai_fmt = fmt;
return 0;
}
/*
* Set the SSP audio DMA parameters and sample size.
* Can be called multiple times by oss emulation.
*/
static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *cpu_dai)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
int chn = params_channels(params);
u32 sscr0;
u32 sspsp;
int width = snd_pcm_format_physical_width(params_format(params));
int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf;
struct pxa2xx_pcm_dma_params *dma_data;
dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
/* generate correct DMA params */
kfree(dma_data);
/* Network mode with one active slot (ttsa == 1) can be used
* to force 16-bit frame width on the wire (for S16_LE), even
* with two channels. Use 16-bit DMA transfers for this case.
*/
dma_data = pxa_ssp_get_dma_params(ssp,
((chn == 2) && (ttsa != 1)) || (width == 32),
substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
snd_soc_dai_set_dma_data(cpu_dai, substream, dma_data);
/* we can only change the settings if the port is not in use */
if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
return 0;
/* clear selected SSP bits */
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
#ifdef CONFIG_PXA3xx
if (cpu_is_pxa3xx())
sscr0 |= SSCR0_FPCKE;
#endif
sscr0 |= SSCR0_DataSize(16);
break;
case SNDRV_PCM_FORMAT_S24_LE:
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
break;
case SNDRV_PCM_FORMAT_S32_LE:
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
break;
}
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
sspsp = pxa_ssp_read_reg(ssp, SSPSP);
if ((pxa_ssp_get_scr(ssp) == 4) && (width == 16)) {
/* This is a special case where the bitclk is 64fs
* and we're not dealing with 2*32 bits of audio
* samples.
*
* The SSP values used for that are all found out by
* trying and failing a lot; some of the registers
* needed for that mode are only available on PXA3xx.
*/
#ifdef CONFIG_PXA3xx
if (!cpu_is_pxa3xx())
return -EINVAL;
sspsp |= SSPSP_SFRMWDTH(width * 2);
sspsp |= SSPSP_SFRMDLY(width * 4);
sspsp |= SSPSP_EDMYSTOP(3);
sspsp |= SSPSP_DMYSTOP(3);
sspsp |= SSPSP_DMYSTRT(1);
#else
return -EINVAL;
#endif
} else {
/* The frame width is the width the LRCLK is
* asserted for; the delay is expressed in
* half cycle units. We need the extra cycle
* because the data starts clocking out one BCLK
* after LRCLK changes polarity.
*/
sspsp |= SSPSP_SFRMWDTH(width + 1);
sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
sspsp |= SSPSP_DMYSTRT(1);
}
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
break;
default:
break;
}
/* When we use a network mode, we always require TDM slots
* - complain loudly and fail if they've not been set up yet.
*/
if ((sscr0 & SSCR0_MOD) && !ttsa) {
dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n");
return -EINVAL;
}
dump_registers(ssp);
return 0;
}
static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
struct ssp_device *ssp, int value)
{
uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
if (value && (sscr0 & SSCR0_SSE))
pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
if (value)
sscr1 |= SSCR1_TSRE;
else
sscr1 &= ~SSCR1_TSRE;
} else {
if (value)
sscr1 |= SSCR1_RSRE;
else
sscr1 &= ~SSCR1_RSRE;
}
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
if (value) {
pxa_ssp_write_reg(ssp, SSSR, sssr);
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
}
}
static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
struct snd_soc_dai *cpu_dai)
{
int ret = 0;
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
struct ssp_device *ssp = priv->ssp;
int val;
switch (cmd) {
case SNDRV_PCM_TRIGGER_RESUME:
pxa_ssp_enable(ssp);
break;
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
pxa_ssp_set_running_bit(substream, ssp, 1);
val = pxa_ssp_read_reg(ssp, SSSR);
pxa_ssp_write_reg(ssp, SSSR, val);
break;
case SNDRV_PCM_TRIGGER_START:
pxa_ssp_set_running_bit(substream, ssp, 1);
break;
case SNDRV_PCM_TRIGGER_STOP:
pxa_ssp_set_running_bit(substream, ssp, 0);
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
pxa_ssp_disable(ssp);
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
pxa_ssp_set_running_bit(substream, ssp, 0);
break;
default:
ret = -EINVAL;
}
dump_registers(ssp);
return ret;
}
static int pxa_ssp_probe(struct snd_soc_dai *dai)
{
struct ssp_priv *priv;
int ret;
priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio");
if (priv->ssp == NULL) {
ret = -ENODEV;
goto err_priv;
}
priv->dai_fmt = (unsigned int) -1;
snd_soc_dai_set_drvdata(dai, priv);
return 0;
err_priv:
kfree(priv);
return ret;
}
static int pxa_ssp_remove(struct snd_soc_dai *dai)
{
struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai);
pxa_ssp_free(priv->ssp);
kfree(priv);
return 0;
}
#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
SNDRV_PCM_FMTBIT_S24_LE | \
SNDRV_PCM_FMTBIT_S32_LE)
static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
.startup = pxa_ssp_startup,
.shutdown = pxa_ssp_shutdown,
.trigger = pxa_ssp_trigger,
.hw_params = pxa_ssp_hw_params,
.set_sysclk = pxa_ssp_set_dai_sysclk,
.set_clkdiv = pxa_ssp_set_dai_clkdiv,
.set_pll = pxa_ssp_set_dai_pll,
.set_fmt = pxa_ssp_set_dai_fmt,
.set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
.set_tristate = pxa_ssp_set_dai_tristate,
};
static struct snd_soc_dai_driver pxa_ssp_dai = {
.probe = pxa_ssp_probe,
.remove = pxa_ssp_remove,
.suspend = pxa_ssp_suspend,
.resume = pxa_ssp_resume,
.playback = {
.channels_min = 1,
.channels_max = 8,
.rates = PXA_SSP_RATES,
.formats = PXA_SSP_FORMATS,
},
.capture = {
.channels_min = 1,
.channels_max = 8,
.rates = PXA_SSP_RATES,
.formats = PXA_SSP_FORMATS,
},
.ops = &pxa_ssp_dai_ops,
};
static __devinit int asoc_ssp_probe(struct platform_device *pdev)
{
return snd_soc_register_dai(&pdev->dev, &pxa_ssp_dai);
}
static int __devexit asoc_ssp_remove(struct platform_device *pdev)
{
snd_soc_unregister_dai(&pdev->dev);
return 0;
}
static struct platform_driver asoc_ssp_driver = {
.driver = {
.name = "pxa-ssp-dai",
.owner = THIS_MODULE,
},
.probe = asoc_ssp_probe,
.remove = __devexit_p(asoc_ssp_remove),
};
module_platform_driver(asoc_ssp_driver);
/* Module information */
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
MODULE_LICENSE("GPL");