linux-stable/drivers/tty/serial
Geert Uytterhoeven 2768cf4287 serial: sh-sci: Clear RX, error, and break flags during reset
Setting the FIFO reset bits is not sufficient to reset the RX FIFO.
After this the status register's RDF flag bit may still be set, causing
the reception of one stale byte of data.

To fix this, clear all status flag bits related to reception, error, and
break handling, cfr. the initialization flowchart in the datasheet.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-25 09:09:53 -07:00
..
8250 tty: 8250, remove shadow and unused variables 2016-06-25 09:04:48 -07:00
cpm_uart tty: serial: cpm_uart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
jsm tty: serial: jsm_tty: fixed redundant variable issue. 2016-02-07 13:36:09 -08:00
21285.c
altera_jtaguart.c drivers/tty/serial: altera: fix typos in #endif comments 2015-05-06 22:26:58 +02:00
altera_uart.c serial: altera_uart: Use of_property_read_u32 instead of open-coding it 2015-10-04 17:47:49 +01:00
amba-pl010.c
amba-pl011.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
amba-pl011.h tty: amba-pl011: clean up LCR register offsets 2015-12-13 19:59:48 -08:00
apbuart.c tty: serial: apbuart: Fix module autoload for OF platform driver 2015-10-04 19:09:21 +01:00
apbuart.h
ar933x_uart.c
arc_uart.c earlycon: Use common framework for earlycon declarations 2016-02-06 22:07:37 -08:00
atmel_serial.c tty/serial: atmel: fix hardware handshake selection 2016-04-28 20:07:10 -07:00
bcm63xx_uart.c serial/bcm63xx_uart: Deinline wait_for_xmitr, save 374 bytes 2015-12-13 19:59:48 -08:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c serial:bfin-uart:Remove 'struct timeval' 2015-12-13 19:59:48 -08:00
clps711x.c serial: clps711x: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
crisv10.c tty: Replace ASYNC_INITIALIZED bit and update atomically 2016-04-30 09:26:55 -07:00
crisv10.h
digicolor-usart.c tty/serial: digicolor: Fix bad usage of IS_ERR_VALUE 2016-02-14 17:39:36 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c serial: earlycon: Show the earlycon "driver" in banner 2016-02-06 22:07:37 -08:00
efm32-uart.c
etraxfs-uart.c serial: etraxfs-uart: Fix crash 2015-11-20 16:19:54 -08:00
fsl_lpuart.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
icom.c tty: Remove unused SERIAL_DO_RESTART define 2015-12-13 19:59:48 -08:00
icom.h
ifx6x60.c TTY: serial/ifx6x60, initialize more 2016-04-30 09:26:55 -07:00
ifx6x60.h
imx.c serial: imx: Use generic uart-has-rtscts DT property 2016-04-30 09:26:55 -07:00
ioc3_serial.c tty: ioc3_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ioc4_serial.c tty: ioc4_serial.c: move assignment out of if () block 2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig serial: sh-sci: Add support for GPIO-controlled modem lines 2016-06-25 09:07:51 -07:00
kgdb_nmi.c serial: kgdb_nmi: Use bool function return values of true/false not 1/0 2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c drivers/tty: make serial/lantic.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: fix handling platform_get_irq result 2015-10-04 19:09:21 +01:00
m32r_sio.c tty: stop defining STD_COM_FLAGS in drivers 2016-06-25 08:56:30 -07:00
m32r_sio_reg.h
Makefile TTY and Serial driver update for 4.7-rc1 2016-05-20 20:57:27 -07:00
max310x.c serial: max310x: use gpiochip data pointer 2016-04-26 15:35:25 +02:00
max3100.c spi: Drop owner assignment from spi_drivers 2015-10-28 10:30:17 +09:00
mcf.c drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE 2015-05-06 22:26:59 +02:00
men_z135_uart.c serial/men_z135_uart: Deinline men_z135_reg_clr, save 176 bytes 2015-12-13 19:59:48 -08:00
meson_uart.c tty: serial: meson: Implement earlycon support 2016-04-30 09:26:55 -07:00
mpc52xx_uart.c tty: serial: constify psc_ops structs 2016-02-06 22:31:47 -08:00
mps2-uart.c serial: mps2-uart: add support for early console 2016-04-30 09:26:55 -07:00
mpsc.c TTY: serial/mpsc, remove unused fields 2016-02-06 22:16:21 -08:00
msm_serial.c tty: serial: msm: Support more bauds 2016-04-30 09:26:55 -07:00
msm_serial.h tty: serial: msm: Add RX DMA support 2015-10-04 19:15:17 +01:00
mux.c parisc: serial/mux: Convert to uart_console_device instead of open-coded 2015-10-22 15:44:28 +02:00
mvebu-uart.c drivers/tty: make serial/mvebu-uart.c explicitly non-modular 2016-04-30 09:26:55 -07:00
mxs-auart.c serial: mxs-auart: Use generic uart-has-rtscts DT property 2016-04-30 09:26:55 -07:00
netx-serial.c
omap-serial.c Merge 4.5-rc4 into tty-next 2016-02-14 14:36:04 -08:00
pch_uart.c
pic32_uart.c serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pic32_uart.h serial: pic32_uart: Add PIC32 UART driver 2016-05-13 14:01:56 +02:00
pmac_zilog.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c serial/pxa: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
rp2.c
sa1100.c
samsung.c serial: samsung: Reorder the sequence of clock control when call s3c24xx_serial_set_termios() 2016-04-30 09:26:55 -07:00
samsung.h serial: samsung: fix DMA mode enter condition for small FIFO sizes 2015-08-04 22:07:23 -07:00
sb1250-duart.c
sc16is7xx.c TTY and Serial driver update for 4.7-rc1 2016-05-20 20:57:27 -07:00
sccnxp.c
serial-tegra.c TTY: serial, handle platform_get_irq retval properly 2016-06-25 09:01:52 -07:00
serial_core.c serial: core: Fix port mutex assert if lockdep disabled 2016-05-03 17:53:20 -07:00
serial_ks8695.c serial: Fix ASYNC_* => UPF_* flags misuse 2016-01-28 14:17:42 -08:00
serial_mctrl_gpio.c serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios 2016-05-01 13:22:54 -07:00
serial_mctrl_gpio.h serial: mctrl_gpio: Drop support for out1-gpios and out2-gpios 2016-05-01 13:22:54 -07:00
serial_txx9.c
sh-sci.c serial: sh-sci: Clear RX, error, and break flags during reset 2016-06-25 09:09:53 -07:00
sh-sci.h serial: sh-sci: Add more Serial Port Control/Data Register documentation 2016-06-25 09:07:51 -07:00
sirfsoc_uart.c serial: sirf: Use generic uart-has-rtscts DT property 2016-04-30 09:26:55 -07:00
sirfsoc_uart.h serial: sirf: let uart's receive start in right place 2015-07-23 15:32:04 -07:00
sn_console.c drivers/tty: make serial/sn_console.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sprd_serial.c remove lots of IS_ERR_VALUE abuses 2016-05-27 15:26:11 -07:00
st-asc.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
stm32-usart.c tty/serial: st-asc: drop the use of IRQF_NO_SUSPEND 2015-10-04 19:11:05 +01:00
suncore.c drivers/tty: make serial/suncore.c driver explicitly non-modular 2015-07-23 18:27:41 -07:00
sunhv.c tty/serial: Skip 'NULL' char after console break when sysrq enabled 2015-12-24 12:13:37 -05:00
sunsab.c
sunsab.h
sunsu.c serial/sunsu: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c serial-uartlite: Constify uartlite_be/uartlite_le 2016-04-30 09:26:55 -07:00
ucc_uart.c QE-UART: add "fsl,t1040-ucc-uart" to of_device_id 2016-05-01 13:55:12 -07:00
vr41xx_siu.c
vt8500_serial.c serial/vt8500_serial: Deinline wait_for_xmitr, save 165 bytes 2015-12-13 19:59:48 -08:00
xilinx_uartps.c serial: xuartps: Enable OF earlycon support 2016-03-07 16:11:14 -08:00
zs.c serial: zs: Fix a transmit lockup in console output 2016-02-06 23:13:30 -08:00
zs.h