Sekhar Nori 27c93af7e7 serial: 8250_omap: workaround module disable errata on dra7x SoCs ... Due to Advisory 21 as documented in AM437x errata document, UART module cannot be disabled once DMA is used. The only workaround is to softreset the module before disabling it. DRA7x UARTs are compatible to AM437x UARTs in terms of this errata and prescribed workaround. Enable usage of workaround for this errata on DRA7x SoCs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Reviewed-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2015-07-23 15:24:11 -07:00
..
8250	serial: 8250_omap: workaround module disable errata on dra7x SoCs	2015-07-23 15:24:11 -07:00
cpm_uart	tty: cpm_uart: replace CONFIG_8xx by CONFIG_CPM1	2015-03-26 23:00:36 +01:00
jsm	serial: jsm: some off by one bugs	2015-03-26 23:00:36 +01:00
21285.c
68328serial.c	tty: 68328serial.c: move assignment out of if () block	2015-05-10 19:04:16 +02:00
altera_jtaguart.c	drivers/tty/serial: altera: fix typos in #endif comments	2015-05-06 22:26:58 +02:00
altera_uart.c	drivers/tty/serial: altera: fix typos in #endif comments	2015-05-06 22:26:58 +02:00
amba-pl010.c
amba-pl011.c	drivers: PL011: add ACPI probing for SBSA UART	2015-05-24 13:08:51 -07:00
apbuart.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
apbuart.h
ar933x_uart.c	serial: ar933x_uart: Fix off-by-one for checking valid alias id	2015-03-07 03:20:25 +01:00
arc_uart.c
atmel_serial.c	tty/serial: at91: RS485 mode: 0 is valid for delay_rts_after_send	2015-05-24 12:49:16 -07:00
bcm63xx_uart.c	tty: serial/bcm63xx_uart: fix sparse warning	2015-03-07 03:13:07 +01:00
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c	serial: bfin: ctsrts: enfore Kconfig naming convention	2015-05-06 22:26:59 +02:00
clps711x.c	serial: clps711x: fail if mctrl_gpio_init fails	2015-03-07 03:15:03 +01:00
crisv10.c	tty: crisv10.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
crisv10.h
digicolor-usart.c	tty/serial: digicolor: remove sysrq reference	2015-02-02 10:11:25 -08:00
dz.c
dz.h
earlycon-arm-semihost.c
earlycon.c	serial: earlycon: Add support for big-endian MMIO accesses	2015-06-01 06:55:12 +09:00
efm32-uart.c
etraxfs-uart.c	serial: driver for ETRAX FS UART	2015-02-07 18:43:16 +08:00
fsl_lpuart.c	Merge 4.0-rc7 into tty-next	2015-04-07 11:07:20 +02:00
icom.c	tty: icom.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
icom.h
ifx6x60.c	serial: ifx6x60: Remove superfluous casts when calling request_irq()	2015-05-06 22:27:01 +02:00
ifx6x60.h
imx.c	Merge 4.1-rc7 into tty-next	2015-06-08 10:49:28 -07:00
ioc3_serial.c	tty: ioc3_serial.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
ioc4_serial.c	tty: ioc4_serial.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
ip22zilog.c
ip22zilog.h
Kconfig	TTY/Serial driver patches for 4.2-rc1	2015-06-26 15:53:22 -07:00
kgdb_nmi.c	serial: kgdb_nmi: Use bool function return values of true/false not 1/0	2015-05-06 22:26:57 +02:00
kgdboc.c
lantiq.c
lpc32xx_hs.c
m32r_sio.c
m32r_sio.h
m32r_sio_reg.h
Makefile	serial: stm32-usart: Add STM32 USART Driver	2015-06-10 17:34:26 -07:00
max310x.c
max3100.c	tty: max3100: use msecs_to_jiffies for time conversion	2015-03-07 03:13:08 +01:00
mcf.c	drivers/tty/serial/mcf.c: fix typo on SERIAL_MCF_CONSOLE	2015-05-06 22:26:59 +02:00
men_z135_uart.c	tty: serial: men_z135_uart: Fix driver for changes in hardware	2015-02-02 10:11:27 -08:00
meson_uart.c	ARM: meson: serial: convert iounmap to devm_iounmap	2015-05-06 22:27:02 +02:00
mpc52xx_uart.c	drivers/tty/serial/mpc52xx_uart.c: fix typo in C comment	2015-05-06 22:26:59 +02:00
mpsc.c	tty: mpsc.c: move assignment out of if () block	2015-05-10 19:04:17 +02:00
msm_serial.c	tty: serial: msm_serial: Remove console unregistration from driver exit.	2015-02-02 10:11:25 -08:00
msm_serial.h	tty: serial: msm_serial: Remove dead code	2015-03-26 22:31:09 +01:00
mux.c
mxs-auart.c	serial: mxs: Constify platform_device_id	2015-05-10 19:08:16 +02:00
netx-serial.c
nwpserial.c
of_serial.c	serial: of_serial: check the return value of clk_prepare_enable()	2015-06-01 06:55:12 +09:00
omap-serial.c	serial: omap: Switch wake-up interrupt to generic wakeirq	2015-06-09 23:35:00 -07:00
pch_uart.c
pmac_zilog.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
rp2.c
sa1100.c
samsung.c	serial: samsung: Constify platform_device_id	2015-05-10 19:08:16 +02:00
samsung.h	serial: samsung: add DMA support for RX	2015-01-09 14:25:39 -08:00
sb1250-duart.c
sc16is7xx.c	sc16is7xx: use kworker for RS-485 configuration	2015-06-01 06:47:27 +09:00
sccnxp.c
serial-tegra.c	serial: tegra: Fix memory leak on DMA setup failure	2015-05-24 12:53:44 -07:00
serial_core.c	serial: core: cleanup in uart_get_baud_rate()	2015-06-12 17:34:36 -07:00
serial_ks8695.c	tty/serial: kill off set_irq_flags usage	2015-06-09 12:26:32 -07:00
serial_mctrl_gpio.c	TTY/Serial driver patches for 4.2-rc1	2015-06-26 15:53:22 -07:00
serial_mctrl_gpio.h
serial_txx9.c
sh-sci.c	TTY/Serial driver patches for 4.2-rc1	2015-06-26 15:53:22 -07:00
sh-sci.h	serial: sh-sci: Replace hardcoded overrun bit values	2015-05-10 19:06:39 +02:00
sirfsoc_uart.c	tty/serial: kill off set_irq_flags usage	2015-06-09 12:26:32 -07:00
sirfsoc_uart.h	serial: sirf: use hrtimer for data rx	2015-06-01 06:51:37 +09:00
sn_console.c
sprd_serial.c	serial: sprd: check for NULL after calling devm_clk_get	2015-06-12 17:39:50 -07:00
st-asc.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
stm32-usart.c	serial: stm32-usart: Add STM32 USART Driver	2015-06-10 17:34:26 -07:00
suncore.c
sunhv.c
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
tilegx.c
timbuart.c
timbuart.h
uartlite.c	serial: xilinx: Use platform_get_irq to get irq description structure	2015-04-28 14:26:21 +02:00
ucc_uart.c	tty: constify of_device_id array	2015-03-26 22:49:10 +01:00
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c	serial: xuartps: add __init to earlycon write method	2015-05-10 19:10:08 +02:00
zs.c
zs.h