mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-30 08:02:30 +00:00
d5950b4355
Create a new top-level menu named "Networking" thus moving net related options and protocol selection way from the drivers menu and up on the top-level where they belong. To implement this all architectures has to source "net/Kconfig" before drivers/*/Kconfig in their Kconfig file. This change has been implemented for all architectures. Device drivers for ordinary NIC's are still to be found in the Device Drivers section, but Bluetooth, IrDA and ax25 are located with their corresponding menu entries under the new networking menu item. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: David S. Miller <davem@davemloft.net>
1670 lines
42 KiB
Text
1670 lines
42 KiB
Text
config MIPS
|
|
bool
|
|
default y
|
|
# Horrible source of confusion. Die, die, die ...
|
|
select EMBEDDED
|
|
|
|
config MIPS64
|
|
bool "64-bit kernel"
|
|
help
|
|
Select this option if you want to build a 64-bit kernel. You should
|
|
only select this option if you have hardware that actually has a
|
|
64-bit processor and if your application will actually benefit from
|
|
64-bit processing, otherwise say N. You must say Y for kernels for
|
|
SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2). If in doubt say N.
|
|
|
|
config 64BIT
|
|
def_bool MIPS64
|
|
|
|
config MIPS32
|
|
bool
|
|
depends on MIPS64 = 'n'
|
|
default y
|
|
|
|
mainmenu "Linux/MIPS Kernel Configuration"
|
|
|
|
source "init/Kconfig"
|
|
|
|
menu "Machine selection"
|
|
|
|
config MACH_JAZZ
|
|
bool "Support for the Jazz family of machines"
|
|
select ARC
|
|
select ARC32
|
|
select GENERIC_ISA_DMA
|
|
select I8259
|
|
select ISA
|
|
help
|
|
This a family of machines based on the MIPS R4030 chipset which was
|
|
used by several vendors to build RISC/os and Windows NT workstations.
|
|
Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
|
|
Olivetti M700-10 workstations.
|
|
|
|
config ACER_PICA_61
|
|
bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
|
|
depends on MACH_JAZZ && EXPERIMENTAL
|
|
select DMA_NONCOHERENT
|
|
help
|
|
This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
|
|
kernel that runs on these, say Y here. For details about Linux on
|
|
the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
|
|
<http://www.linux-mips.org/>.
|
|
|
|
config MIPS_MAGNUM_4000
|
|
bool "Support for MIPS Magnum 4000"
|
|
depends on MACH_JAZZ
|
|
select DMA_NONCOHERENT
|
|
help
|
|
This is a machine with a R4000 100 MHz CPU. To compile a Linux
|
|
kernel that runs on these, say Y here. For details about Linux on
|
|
the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
|
|
<http://www.linux-mips.org/>.
|
|
|
|
config OLIVETTI_M700
|
|
bool "Support for Olivetti M700-10"
|
|
depends on MACH_JAZZ
|
|
select DMA_NONCOHERENT
|
|
help
|
|
This is a machine with a R4000 100 MHz CPU. To compile a Linux
|
|
kernel that runs on these, say Y here. For details about Linux on
|
|
the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
|
|
<http://www.linux-mips.org/>.
|
|
|
|
config MACH_VR41XX
|
|
bool "Support for NEC VR41XX-based machines"
|
|
|
|
config NEC_CMBVR4133
|
|
bool "Support for NEC CMB-VR4133"
|
|
depends on MACH_VR41XX
|
|
select CPU_VR41XX
|
|
select DMA_NONCOHERENT
|
|
select IRQ_CPU
|
|
select HW_HAS_PCI
|
|
select PCI_VR41XX
|
|
|
|
config ROCKHOPPER
|
|
bool "Support for Rockhopper baseboard"
|
|
depends on NEC_CMBVR4133
|
|
select I8259
|
|
select HAVE_STD_PC_SERIAL_PORT
|
|
|
|
config CASIO_E55
|
|
bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
|
|
depends on MACH_VR41XX
|
|
select DMA_NONCOHERENT
|
|
select IRQ_CPU
|
|
select ISA
|
|
|
|
config IBM_WORKPAD
|
|
bool "Support for IBM WorkPad z50"
|
|
depends on MACH_VR41XX
|
|
select DMA_NONCOHERENT
|
|
select IRQ_CPU
|
|
select ISA
|
|
|
|
config TANBAC_TB0226
|
|
bool "Support for TANBAC TB0226 (Mbase)"
|
|
depends on MACH_VR41XX
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
help
|
|
The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
|
|
Please refer to <http://www.tanbac.co.jp/> about Mbase.
|
|
|
|
config TANBAC_TB0229
|
|
bool "Support for TANBAC TB0229 (VR4131DIMM)"
|
|
depends on MACH_VR41XX
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
help
|
|
The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
|
|
Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM.
|
|
|
|
config VICTOR_MPC30X
|
|
bool "Support for Victor MP-C303/304"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
depends on MACH_VR41XX
|
|
|
|
config ZAO_CAPCELLA
|
|
bool "Support for ZAO Networks Capcella"
|
|
depends on MACH_VR41XX
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
|
|
config PCI_VR41XX
|
|
bool "Add PCI control unit support of NEC VR4100 series"
|
|
depends on MACH_VR41XX && PCI
|
|
|
|
config VRC4171
|
|
tristate "Add NEC VRC4171 companion chip support"
|
|
depends on MACH_VR41XX && ISA
|
|
---help---
|
|
The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
|
|
|
|
config VRC4173
|
|
tristate "Add NEC VRC4173 companion chip support"
|
|
depends on MACH_VR41XX && PCI_VR41XX
|
|
---help---
|
|
The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
|
|
|
|
config TOSHIBA_JMR3927
|
|
bool "Support for Toshiba JMR-TX3927 board"
|
|
depends on MIPS32
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select SWAP_IO_SPACE
|
|
|
|
config MIPS_COBALT
|
|
bool "Support for Cobalt Server (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select I8259
|
|
select IRQ_CPU
|
|
|
|
config MACH_DECSTATION
|
|
bool "Support for DECstations"
|
|
select BOOT_ELF32
|
|
select DMA_NONCOHERENT
|
|
select IRQ_CPU
|
|
depends on MIPS32 || EXPERIMENTAL
|
|
---help---
|
|
This enables support for DEC's MIPS based workstations. For details
|
|
see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
|
|
DECstation porting pages on <http://decstation.unix-ag.org/>.
|
|
|
|
If you have one of the following DECstation Models you definitely
|
|
want to choose R4xx0 for the CPU Type:
|
|
|
|
DECstation 5000/50
|
|
DECstation 5000/150
|
|
DECstation 5000/260
|
|
DECsystem 5900/260
|
|
|
|
otherwise choose R3000.
|
|
|
|
config MIPS_EV64120
|
|
bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select MIPS_GT64120
|
|
help
|
|
This is an evaluation board based on the Galileo GT-64120
|
|
single-chip system controller that contains a MIPS R5000 compatible
|
|
core running at 75/100MHz. Their website is located at
|
|
<http://www.marvell.com/>. Say Y here if you wish to build a
|
|
kernel for this platform.
|
|
|
|
config EVB_PCI1
|
|
bool "Enable Second PCI (PCI1)"
|
|
depends on MIPS_EV64120
|
|
|
|
config MIPS_EV96100
|
|
bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select MIPS_GT96100
|
|
select RM7000_CPU_SCACHE
|
|
select SWAP_IO_SPACE
|
|
help
|
|
This is an evaluation board based on the Galileo GT-96100 LAN/WAN
|
|
communications controllers containing a MIPS R5000 compatible core
|
|
running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
|
|
here if you wish to build a kernel for this platform.
|
|
|
|
config MIPS_IVR
|
|
bool "Support for Globespan IVR board"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
help
|
|
This is an evaluation board built by Globespan to showcase thir
|
|
iVR (Internet Video Recorder) design. It utilizes a QED RM5231
|
|
R5000 MIPS core. More information can be found out their website
|
|
located at <http://www.globespan.net/>. Say Y here if you wish to
|
|
build a kernel for this platform.
|
|
|
|
config LASAT
|
|
bool "Support for LASAT Networks platforms"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select MIPS_GT64120
|
|
select R5000_CPU_SCACHE
|
|
|
|
config PICVUE
|
|
tristate "PICVUE LCD display driver"
|
|
depends on LASAT
|
|
|
|
config PICVUE_PROC
|
|
tristate "PICVUE LCD display driver /proc interface"
|
|
depends on PICVUE
|
|
|
|
config DS1603
|
|
bool "DS1603 RTC driver"
|
|
depends on LASAT
|
|
|
|
config LASAT_SYSCTL
|
|
bool "LASAT sysctl interface"
|
|
depends on LASAT
|
|
|
|
config MIPS_ITE8172
|
|
bool "Support for ITE 8172G board"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
help
|
|
Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
|
|
with ATX form factor that utilizes a MIPS R5000 to work with its
|
|
ITE8172G companion internet appliance chip. The MIPS core can be
|
|
either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
|
|
a kernel for this platform.
|
|
|
|
config IT8172_REVC
|
|
bool "Support for older IT8172 (Rev C)"
|
|
depends on MIPS_ITE8172
|
|
help
|
|
Say Y here to support the older, Revision C version of the Integrated
|
|
Technology Express, Inc. ITE8172 SBC. Vendor page at
|
|
<http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
|
|
board at <http://www.mvista.com/partners/semiconductor/ite.html>.
|
|
|
|
config MIPS_ATLAS
|
|
bool "Support for MIPS Atlas board"
|
|
select BOOT_ELF32
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select MIPS_GT64120
|
|
select SWAP_IO_SPACE
|
|
help
|
|
This enables support for the QED R5231-based MIPS Atlas evaluation
|
|
board.
|
|
|
|
config MIPS_MALTA
|
|
bool "Support for MIPS Malta board"
|
|
select BOOT_ELF32
|
|
select HAVE_STD_PC_SERIAL_PORT
|
|
select DMA_NONCOHERENT
|
|
select GENERIC_ISA_DMA
|
|
select HW_HAS_PCI
|
|
select I8259
|
|
select MIPS_GT64120
|
|
select SWAP_IO_SPACE
|
|
help
|
|
This enables support for the VR5000-based MIPS Malta evaluation
|
|
board.
|
|
|
|
config MIPS_SEAD
|
|
bool "Support for MIPS SEAD board (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
select IRQ_CPU
|
|
select DMA_NONCOHERENT
|
|
|
|
config MOMENCO_OCELOT
|
|
bool "Support for Momentum Ocelot board"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select IRQ_CPU_RM7K
|
|
select MIPS_GT64120
|
|
select RM7000_CPU_SCACHE
|
|
select SWAP_IO_SPACE
|
|
help
|
|
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
|
|
Momentum Computer <http://www.momenco.com/>.
|
|
|
|
config MOMENCO_OCELOT_G
|
|
bool "Support for Momentum Ocelot-G board"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select IRQ_CPU_RM7K
|
|
select PCI_MARVELL
|
|
select RM7000_CPU_SCACHE
|
|
select SWAP_IO_SPACE
|
|
help
|
|
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
|
|
Momentum Computer <http://www.momenco.com/>.
|
|
|
|
config MOMENCO_OCELOT_C
|
|
bool "Support for Momentum Ocelot-C board"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select IRQ_MV64340
|
|
select PCI_MARVELL
|
|
select RM7000_CPU_SCACHE
|
|
select SWAP_IO_SPACE
|
|
help
|
|
The Ocelot is a MIPS-based Single Board Computer (SBC) made by
|
|
Momentum Computer <http://www.momenco.com/>.
|
|
|
|
config MOMENCO_OCELOT_3
|
|
bool "Support for Momentum Ocelot-3 board"
|
|
select BOOT_ELF32
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select IRQ_CPU_RM7K
|
|
select IRQ_MV64340
|
|
select PCI_MARVELL
|
|
select RM7000_CPU_SCACHE
|
|
select SWAP_IO_SPACE
|
|
help
|
|
The Ocelot-3 is based off Discovery III System Controller and
|
|
PMC-Sierra Rm79000 core.
|
|
|
|
config MOMENCO_JAGUAR_ATX
|
|
bool "Support for Momentum Jaguar board"
|
|
select BOOT_ELF32
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select IRQ_CPU_RM7K
|
|
select IRQ_MV64340
|
|
select LIMITED_DMA
|
|
select PCI_MARVELL
|
|
select RM7000_CPU_SCACHE
|
|
select SWAP_IO_SPACE
|
|
help
|
|
The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
|
|
Momentum Computer <http://www.momenco.com/>.
|
|
|
|
config JAGUAR_DMALOW
|
|
bool "Low DMA Mode"
|
|
depends on MOMENCO_JAGUAR_ATX
|
|
help
|
|
Select to Y if jump JP5 is set on your board, N otherwise. Normally
|
|
the jumper is set, so if you feel unsafe, just say Y.
|
|
|
|
config PMC_YOSEMITE
|
|
bool "Support for PMC-Sierra Yosemite eval board"
|
|
select DMA_COHERENT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select IRQ_CPU_RM7K
|
|
select IRQ_CPU_RM9K
|
|
select SWAP_IO_SPACE
|
|
help
|
|
Yosemite is an evaluation board for the RM9000x2 processor
|
|
manufactured by PMC-Sierra
|
|
|
|
config HYPERTRANSPORT
|
|
bool "Hypertransport Support for PMC-Sierra Yosemite"
|
|
depends on PMC_YOSEMITE
|
|
|
|
config DDB5074
|
|
bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
select DMA_NONCOHERENT
|
|
select HAVE_STD_PC_SERIAL_PORT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select I8259
|
|
select ISA
|
|
help
|
|
This enables support for the VR5000-based NEC DDB Vrc-5074
|
|
evaluation board.
|
|
|
|
config DDB5476
|
|
bool "Support for NEC DDB Vrc-5476"
|
|
select DMA_NONCOHERENT
|
|
select HAVE_STD_PC_SERIAL_PORT
|
|
select HW_HAS_PCI
|
|
select IRQ_CPU
|
|
select I8259
|
|
select ISA
|
|
help
|
|
This enables support for the R5432-based NEC DDB Vrc-5476
|
|
evaluation board.
|
|
|
|
Features : kernel debugging, serial terminal, NFS root fs, on-board
|
|
ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
|
|
IDE controller, PS2 keyboard, PS2 mouse, etc.
|
|
|
|
config DDB5477
|
|
bool "Support for NEC DDB Vrc-5477"
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select I8259
|
|
select IRQ_CPU
|
|
help
|
|
This enables support for the R5432-based NEC DDB Vrc-5477,
|
|
or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
|
|
|
|
Features : kernel debugging, serial terminal, NFS root fs, on-board
|
|
ether port USB, AC97, PCI, etc.
|
|
|
|
config DDB5477_BUS_FREQUENCY
|
|
int "bus frequency (in kHZ, 0 for auto-detect)"
|
|
depends on DDB5477
|
|
default 0
|
|
|
|
config NEC_OSPREY
|
|
bool "Support for NEC Osprey board"
|
|
select DMA_NONCOHERENT
|
|
select IRQ_CPU
|
|
|
|
config SGI_IP22
|
|
bool "Support for SGI IP22 (Indy/Indigo2)"
|
|
select ARC
|
|
select ARC32
|
|
select BOOT_ELF32
|
|
select DMA_NONCOHERENT
|
|
select IP22_CPU_SCACHE
|
|
select IRQ_CPU
|
|
select SWAP_IO_SPACE
|
|
help
|
|
This are the SGI Indy, Challenge S and Indigo2, as well as certain
|
|
OEM variants like the Tandem CMN B006S. To compile a Linux kernel
|
|
that runs on these, say Y here.
|
|
|
|
config SGI_IP27
|
|
bool "Support for SGI IP27 (Origin200/2000)"
|
|
depends on MIPS64
|
|
select ARC
|
|
select ARC64
|
|
select DMA_IP27
|
|
select HW_HAS_PCI
|
|
select PCI_DOMAINS
|
|
help
|
|
This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
|
|
workstations. To compile a Linux kernel that runs on these, say Y
|
|
here.
|
|
|
|
#config SGI_SN0_XXL
|
|
# bool "IP27 XXL"
|
|
# depends on SGI_IP27
|
|
# This options adds support for userspace processes upto 16TB size.
|
|
# Normally the limit is just .5TB.
|
|
|
|
config SGI_SN0_N_MODE
|
|
bool "IP27 N-Mode"
|
|
depends on SGI_IP27
|
|
help
|
|
The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
|
|
configured in either N-Modes which allows for more nodes or M-Mode
|
|
which allows for more memory. Your system is most probably
|
|
running in M-Mode, so you should say N here.
|
|
|
|
config ARCH_DISCONTIGMEM_ENABLE
|
|
bool
|
|
default y if SGI_IP27
|
|
help
|
|
Say Y to upport efficient handling of discontiguous physical memory,
|
|
for architectures which are either NUMA (Non-Uniform Memory Access)
|
|
or have huge holes in the physical address space for other reasons.
|
|
See <file:Documentation/vm/numa> for more.
|
|
|
|
config NUMA
|
|
bool "NUMA Support"
|
|
depends on SGI_IP27
|
|
help
|
|
Say Y to compile the kernel to support NUMA (Non-Uniform Memory
|
|
Access). This option is for configuring high-end multiprocessor
|
|
server machines. If in doubt, say N.
|
|
|
|
config MAPPED_KERNEL
|
|
bool "Mapped kernel support"
|
|
depends on SGI_IP27
|
|
help
|
|
Change the way a Linux kernel is loaded into memory on a MIPS64
|
|
machine. This is required in order to support text replication and
|
|
NUMA. If you need to understand it, read the source code.
|
|
|
|
config REPLICATE_KTEXT
|
|
bool "Kernel text replication support"
|
|
depends on SGI_IP27
|
|
help
|
|
Say Y here to enable replicating the kernel text across multiple
|
|
nodes in a NUMA cluster. This trades memory for speed.
|
|
|
|
config REPLICATE_EXHANDLERS
|
|
bool "Exception handler replication support"
|
|
depends on SGI_IP27
|
|
help
|
|
Say Y here to enable replicating the kernel exception handlers
|
|
across multiple nodes in a NUMA cluster. This trades memory for
|
|
speed.
|
|
|
|
config SGI_IP32
|
|
bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
|
|
depends on MIPS64 && EXPERIMENTAL
|
|
select ARC
|
|
select ARC32
|
|
select BOOT_ELF32
|
|
select OWN_DMA
|
|
select DMA_IP32
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select R5000_CPU_SCACHE
|
|
select RM7000_CPU_SCACHE
|
|
help
|
|
If you want this kernel to run on SGI O2 workstation, say Y here.
|
|
|
|
config SOC_AU1X00
|
|
depends on MIPS32
|
|
bool "Support for AMD/Alchemy Au1X00 SOCs"
|
|
|
|
choice
|
|
prompt "Au1X00 SOC Type"
|
|
depends on SOC_AU1X00
|
|
help
|
|
Say Y here to enable support for one of three AMD/Alchemy
|
|
SOCs. For additional documentation see www.amd.com.
|
|
|
|
config SOC_AU1000
|
|
bool "SOC_AU1000"
|
|
config SOC_AU1100
|
|
bool "SOC_AU1100"
|
|
config SOC_AU1500
|
|
bool "SOC_AU1500"
|
|
config SOC_AU1550
|
|
bool "SOC_AU1550"
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "AMD/Alchemy Au1x00 board support"
|
|
depends on SOC_AU1X00
|
|
help
|
|
These are evaluation boards built by AMD/Alchemy to
|
|
showcase their Au1X00 Internet Edge Processors. The SOC design
|
|
is based on the MIPS32 architecture running at 266/400/500MHz
|
|
with many integrated peripherals. Further information can be
|
|
found at their website, <http://www.amd.com/>. Say Y here if you
|
|
wish to build a kernel for this platform.
|
|
|
|
config MIPS_PB1000
|
|
bool "PB1000 board"
|
|
depends on SOC_AU1000
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select SWAP_IO_SPACE
|
|
|
|
config MIPS_PB1100
|
|
bool "PB1100 board"
|
|
depends on SOC_AU1100
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
select SWAP_IO_SPACE
|
|
|
|
config MIPS_PB1500
|
|
bool "PB1500 board"
|
|
depends on SOC_AU1500
|
|
select DMA_COHERENT
|
|
select HW_HAS_PCI
|
|
|
|
config MIPS_PB1550
|
|
bool "PB1550 board"
|
|
depends on SOC_AU1550
|
|
select DMA_COHERENT
|
|
select HW_HAS_PCI
|
|
select MIPS_DISABLE_OBSOLETE_IDE
|
|
|
|
config MIPS_DB1000
|
|
bool "DB1000 board"
|
|
depends on SOC_AU1000
|
|
select DMA_NONCOHERENT
|
|
select HW_HAS_PCI
|
|
|
|
config MIPS_DB1100
|
|
bool "DB1100 board"
|
|
depends on SOC_AU1100
|
|
select DMA_NONCOHERENT
|
|
|
|
config MIPS_DB1500
|
|
bool "DB1500 board"
|
|
depends on SOC_AU1500
|
|
select DMA_COHERENT
|
|
select HW_HAS_PCI
|
|
select MIPS_DISABLE_OBSOLETE_IDE
|
|
|
|
config MIPS_DB1550
|
|
bool "DB1550 board"
|
|
depends on SOC_AU1550
|
|
select HW_HAS_PCI
|
|
select DMA_COHERENT
|
|
select MIPS_DISABLE_OBSOLETE_IDE
|
|
|
|
config MIPS_BOSPORUS
|
|
bool "Bosporus board"
|
|
depends on SOC_AU1500
|
|
select DMA_NONCOHERENT
|
|
|
|
config MIPS_MIRAGE
|
|
bool "Mirage board"
|
|
depends on SOC_AU1500
|
|
select DMA_NONCOHERENT
|
|
|
|
config MIPS_XXS1500
|
|
bool "MyCable XXS1500 board"
|
|
depends on SOC_AU1500
|
|
select DMA_NONCOHERENT
|
|
|
|
config MIPS_MTX1
|
|
bool "4G Systems MTX-1 board"
|
|
depends on SOC_AU1500
|
|
select HW_HAS_PCI
|
|
select DMA_NONCOHERENT
|
|
|
|
endchoice
|
|
|
|
config SIBYTE_SB1xxx_SOC
|
|
bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL
|
|
select BOOT_ELF32
|
|
select DMA_COHERENT
|
|
select SWAP_IO_SPACE
|
|
|
|
choice
|
|
prompt "BCM1xxx SOC-based board"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
default SIBYTE_SWARM
|
|
help
|
|
Enable support for boards based on the SiByte line of SOCs
|
|
from Broadcom. There are configurations for the known
|
|
evaluation boards, or you can choose "Other" and add your
|
|
own board support code.
|
|
|
|
config SIBYTE_SWARM
|
|
bool "BCM91250A-SWARM"
|
|
select SIBYTE_SB1250
|
|
|
|
config SIBYTE_SENTOSA
|
|
bool "BCM91250E-Sentosa"
|
|
select SIBYTE_SB1250
|
|
|
|
config SIBYTE_RHONE
|
|
bool "BCM91125E-Rhone"
|
|
select SIBYTE_BCM1125H
|
|
|
|
config SIBYTE_CARMEL
|
|
bool "BCM91120x-Carmel"
|
|
select SIBYTE_BCM1120
|
|
|
|
config SIBYTE_PTSWARM
|
|
bool "BCM91250PT-PTSWARM"
|
|
select SIBYTE_SB1250
|
|
|
|
config SIBYTE_LITTLESUR
|
|
bool "BCM91250C2-LittleSur"
|
|
select SIBYTE_SB1250
|
|
|
|
config SIBYTE_CRHINE
|
|
bool "BCM91120C-CRhine"
|
|
select SIBYTE_BCM1120
|
|
|
|
config SIBYTE_CRHONE
|
|
bool "BCM91125C-CRhone"
|
|
select SIBYTE_BCM1125
|
|
|
|
config SIBYTE_UNKNOWN
|
|
bool "Other"
|
|
|
|
endchoice
|
|
|
|
config SIBYTE_BOARD
|
|
bool
|
|
depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
|
|
default y
|
|
|
|
choice
|
|
prompt "BCM1xxx SOC Type"
|
|
depends on SIBYTE_UNKNOWN
|
|
default SIBYTE_UNK_BCM1250
|
|
help
|
|
Since you haven't chosen a known evaluation board from
|
|
Broadcom, you must explicitly pick the SOC this kernel is
|
|
targetted for.
|
|
|
|
config SIBYTE_UNK_BCM1250
|
|
bool "BCM1250"
|
|
select SIBYTE_SB1250
|
|
|
|
config SIBYTE_UNK_BCM1120
|
|
bool "BCM1120"
|
|
select SIBYTE_BCM1120
|
|
|
|
config SIBYTE_UNK_BCM1125
|
|
bool "BCM1125"
|
|
select SIBYTE_BCM1125
|
|
|
|
config SIBYTE_UNK_BCM1125H
|
|
bool "BCM1125H"
|
|
select SIBYTE_BCM1125H
|
|
|
|
endchoice
|
|
|
|
config SIBYTE_SB1250
|
|
bool
|
|
select HW_HAS_PCI
|
|
|
|
config SIBYTE_BCM1120
|
|
bool
|
|
select SIBYTE_BCM112X
|
|
|
|
config SIBYTE_BCM1125
|
|
bool
|
|
select HW_HAS_PCI
|
|
select SIBYTE_BCM112X
|
|
|
|
config SIBYTE_BCM1125H
|
|
bool
|
|
select HW_HAS_PCI
|
|
select SIBYTE_BCM112X
|
|
|
|
config SIBYTE_BCM112X
|
|
bool
|
|
|
|
choice
|
|
prompt "SiByte SOC Stepping"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
|
|
config CPU_SB1_PASS_1
|
|
bool "1250 Pass1"
|
|
depends on SIBYTE_SB1250
|
|
select CPU_HAS_PREFETCH
|
|
|
|
config CPU_SB1_PASS_2_1250
|
|
bool "1250 An"
|
|
depends on SIBYTE_SB1250
|
|
select CPU_SB1_PASS_2
|
|
help
|
|
Also called BCM1250 Pass 2
|
|
|
|
config CPU_SB1_PASS_2_2
|
|
bool "1250 Bn"
|
|
depends on SIBYTE_SB1250
|
|
select CPU_HAS_PREFETCH
|
|
help
|
|
Also called BCM1250 Pass 2.2
|
|
|
|
config CPU_SB1_PASS_4
|
|
bool "1250 Cn"
|
|
depends on SIBYTE_SB1250
|
|
select CPU_HAS_PREFETCH
|
|
help
|
|
Also called BCM1250 Pass 3
|
|
|
|
config CPU_SB1_PASS_2_112x
|
|
bool "112x Hybrid"
|
|
depends on SIBYTE_BCM112X
|
|
select CPU_SB1_PASS_2
|
|
|
|
config CPU_SB1_PASS_3
|
|
bool "112x An"
|
|
depends on SIBYTE_BCM112X
|
|
select CPU_HAS_PREFETCH
|
|
|
|
endchoice
|
|
|
|
config CPU_SB1_PASS_2
|
|
bool
|
|
|
|
config SIBYTE_HAS_LDT
|
|
bool
|
|
depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
|
|
default y
|
|
|
|
config SIMULATION
|
|
bool "Running under simulation"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
help
|
|
Build a kernel suitable for running under the GDB simulator.
|
|
Primarily adjusts the kernel's notion of time.
|
|
|
|
config SIBYTE_CFE
|
|
bool "Booting from CFE"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
help
|
|
Make use of the CFE API for enumerating available memory,
|
|
controlling secondary CPUs, and possibly console output.
|
|
|
|
config SIBYTE_CFE_CONSOLE
|
|
bool "Use firmware console"
|
|
depends on SIBYTE_CFE
|
|
help
|
|
Use the CFE API's console write routines during boot. Other console
|
|
options (VT console, sb1250 duart console, etc.) should not be
|
|
configured.
|
|
|
|
config SIBYTE_STANDALONE
|
|
bool
|
|
depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
|
|
default y
|
|
|
|
config SIBYTE_STANDALONE_RAM_SIZE
|
|
int "Memory size (in megabytes)"
|
|
depends on SIBYTE_STANDALONE
|
|
default "32"
|
|
|
|
config SIBYTE_BUS_WATCHER
|
|
bool "Support for Bus Watcher statistics"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
help
|
|
Handle and keep statistics on the bus error interrupts (COR_ECC,
|
|
BAD_ECC, IO_BUS).
|
|
|
|
config SIBYTE_BW_TRACE
|
|
bool "Capture bus trace before bus error"
|
|
depends on SIBYTE_BUS_WATCHER
|
|
help
|
|
Run a continuous bus trace, dumping the raw data as soon as
|
|
a ZBbus error is detected. Cannot work if ZBbus profiling
|
|
is turned on, and also will interfere with JTAG-based trace
|
|
buffer activity. Raw buffer data is dumped to console, and
|
|
must be processed off-line.
|
|
|
|
config SIBYTE_SB1250_PROF
|
|
bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
|
|
config SIBYTE_TBPROF
|
|
bool "Support for ZBbus profiling"
|
|
depends on SIBYTE_SB1xxx_SOC
|
|
|
|
config SNI_RM200_PCI
|
|
bool "Support for SNI RM200 PCI"
|
|
select ARC
|
|
select ARC32
|
|
select BOOT_ELF32
|
|
select DMA_NONCOHERENT
|
|
select GENERIC_ISA_DMA
|
|
select HAVE_STD_PC_SERIAL_PORT
|
|
select HW_HAS_PCI
|
|
select I8259
|
|
select ISA
|
|
help
|
|
The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
|
|
Nixdorf Informationssysteme (SNI), parent company of Pyramid
|
|
Technology and now in turn merged with Fujitsu. Say Y here to
|
|
support this machine type.
|
|
|
|
config TOSHIBA_RBTX4927
|
|
bool "Support for Toshiba TBTX49[23]7 board"
|
|
depends on MIPS32
|
|
select DMA_NONCOHERENT
|
|
select HAS_TXX9_SERIAL
|
|
select HW_HAS_PCI
|
|
select I8259
|
|
select ISA
|
|
select SWAP_IO_SPACE
|
|
help
|
|
This Toshiba board is based on the TX4927 processor. Say Y here to
|
|
support this machine type
|
|
|
|
config TOSHIBA_FPCIB0
|
|
bool "FPCIB0 Backplane Support"
|
|
depends on TOSHIBA_RBTX4927
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
default y
|
|
|
|
config RWSEM_XCHGADD_ALGORITHM
|
|
bool
|
|
|
|
config GENERIC_CALIBRATE_DELAY
|
|
bool
|
|
default y
|
|
|
|
config HAVE_DEC_LOCK
|
|
bool
|
|
default y
|
|
|
|
#
|
|
# Select some configuration options automatically based on user selections.
|
|
#
|
|
config ARC
|
|
bool
|
|
depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
|
|
default y
|
|
|
|
config DMA_COHERENT
|
|
bool
|
|
|
|
config DMA_IP27
|
|
bool
|
|
|
|
config DMA_NONCOHERENT
|
|
bool
|
|
|
|
config EARLY_PRINTK
|
|
bool
|
|
depends on MACH_DECSTATION
|
|
default y
|
|
|
|
config GENERIC_ISA_DMA
|
|
bool
|
|
depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
|
|
default y
|
|
|
|
config I8259
|
|
bool
|
|
depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
|
|
default y
|
|
|
|
config LIMITED_DMA
|
|
bool
|
|
select HIGHMEM
|
|
|
|
config MIPS_BONITO64
|
|
bool
|
|
depends on MIPS_ATLAS || MIPS_MALTA
|
|
default y
|
|
|
|
config MIPS_MSC
|
|
bool
|
|
depends on MIPS_ATLAS || MIPS_MALTA
|
|
default y
|
|
|
|
config MIPS_NILE4
|
|
bool
|
|
depends on LASAT
|
|
default y
|
|
|
|
config MIPS_DISABLE_OBSOLETE_IDE
|
|
bool
|
|
|
|
config CPU_LITTLE_ENDIAN
|
|
bool "Generate little endian code"
|
|
default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
|
|
default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
|
|
help
|
|
Some MIPS machines can be configured for either little or big endian
|
|
byte order. These modes require different kernels. Say Y if your
|
|
machine is little endian, N if it's a big endian machine.
|
|
|
|
config IRQ_CPU
|
|
bool
|
|
|
|
config IRQ_CPU_RM7K
|
|
bool
|
|
|
|
config IRQ_MV64340
|
|
bool
|
|
|
|
config DDB5XXX_COMMON
|
|
bool
|
|
depends on DDB5074 || DDB5476 || DDB5477
|
|
default y
|
|
|
|
config MIPS_BOARDS_GEN
|
|
bool
|
|
depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
|
|
default y
|
|
|
|
config MIPS_GT64111
|
|
bool
|
|
depends on MIPS_COBALT
|
|
default y
|
|
|
|
config MIPS_GT64120
|
|
bool
|
|
depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
|
|
default y
|
|
|
|
config MIPS_TX3927
|
|
bool
|
|
depends on TOSHIBA_JMR3927
|
|
select HAS_TXX9_SERIAL
|
|
default y
|
|
|
|
config PCI_MARVELL
|
|
bool
|
|
|
|
config ITE_BOARD_GEN
|
|
bool
|
|
depends on MIPS_IVR || MIPS_ITE8172
|
|
default y
|
|
|
|
config SWAP_IO_SPACE
|
|
bool
|
|
|
|
#
|
|
# Unfortunately not all GT64120 systems run the chip at the same clock.
|
|
# As the user for the clock rate and try to minimize the available options.
|
|
#
|
|
choice
|
|
prompt "Galileo Chip Clock"
|
|
#default SYSCLK_83 if MIPS_EV64120
|
|
depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
|
|
default SYSCLK_83 if MIPS_EV64120
|
|
default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
|
|
|
|
config SYSCLK_75
|
|
bool "75" if MIPS_EV64120
|
|
|
|
config SYSCLK_83
|
|
bool "83.3" if MIPS_EV64120
|
|
|
|
config SYSCLK_100
|
|
bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
|
|
|
|
endchoice
|
|
|
|
config AU1X00_USB_DEVICE
|
|
bool
|
|
depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
|
|
default n
|
|
|
|
config MIPS_GT96100
|
|
bool
|
|
depends on MIPS_EV96100
|
|
default y
|
|
help
|
|
Say Y here to support the Galileo Technology GT96100 communications
|
|
controller card. There is a web page at <http://www.galileot.com/>.
|
|
|
|
config IT8172_CIR
|
|
bool
|
|
depends on MIPS_ITE8172 || MIPS_IVR
|
|
default y
|
|
|
|
config IT8712
|
|
bool
|
|
depends on MIPS_ITE8172
|
|
default y
|
|
|
|
config BOOT_ELF32
|
|
bool
|
|
depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
|
|
default y
|
|
|
|
config MIPS_L1_CACHE_SHIFT
|
|
int
|
|
default "4" if MACH_DECSTATION
|
|
default "7" if SGI_IP27
|
|
default "5"
|
|
|
|
config ARC32
|
|
bool
|
|
depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
|
|
default y
|
|
|
|
config FB
|
|
bool
|
|
depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
|
|
default y
|
|
---help---
|
|
The frame buffer device provides an abstraction for the graphics
|
|
hardware. It represents the frame buffer of some video hardware and
|
|
allows application software to access the graphics hardware through
|
|
a well-defined interface, so the software doesn't need to know
|
|
anything about the low-level (hardware register) stuff.
|
|
|
|
Frame buffer devices work identically across the different
|
|
architectures supported by Linux and make the implementation of
|
|
application programs easier and more portable; at this point, an X
|
|
server exists which uses the frame buffer device exclusively.
|
|
On several non-X86 architectures, the frame buffer device is the
|
|
only way to use the graphics hardware.
|
|
|
|
The device is accessed through special device nodes, usually located
|
|
in the /dev directory, i.e. /dev/fb*.
|
|
|
|
You need an utility program called fbset to make full use of frame
|
|
buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
|
|
and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto>
|
|
for more information.
|
|
|
|
Say Y here and to the driver for your graphics board below if you
|
|
are compiling a kernel for a non-x86 architecture.
|
|
|
|
If you are compiling for the x86 architecture, you can say Y if you
|
|
want to play with it, but it is not essential. Please note that
|
|
running graphical applications that directly touch the hardware
|
|
(e.g. an accelerated X server) and that are not frame buffer
|
|
device-aware may cause unexpected results. If unsure, say N.
|
|
|
|
config HAVE_STD_PC_SERIAL_PORT
|
|
bool
|
|
|
|
config VR4181
|
|
bool
|
|
depends on NEC_OSPREY
|
|
default y
|
|
|
|
config ARC_CONSOLE
|
|
bool "ARC console support"
|
|
depends on SGI_IP22 || SNI_RM200_PCI
|
|
|
|
config ARC_MEMORY
|
|
bool
|
|
depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
|
|
default y
|
|
|
|
config ARC_PROMLIB
|
|
bool
|
|
depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
|
|
default y
|
|
|
|
config ARC64
|
|
bool
|
|
depends on SGI_IP27
|
|
default y
|
|
|
|
config BOOT_ELF64
|
|
bool
|
|
depends on SGI_IP27
|
|
default y
|
|
|
|
#config MAPPED_PCI_IO y
|
|
# bool
|
|
# depends on SGI_IP27
|
|
# default y
|
|
|
|
config QL_ISP_A64
|
|
bool
|
|
depends on SGI_IP27
|
|
default y
|
|
|
|
config TOSHIBA_BOARDS
|
|
bool
|
|
depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
|
|
default y
|
|
|
|
endmenu
|
|
|
|
menu "CPU selection"
|
|
|
|
choice
|
|
prompt "CPU type"
|
|
default CPU_R4X00
|
|
|
|
config CPU_MIPS32
|
|
bool "MIPS32"
|
|
|
|
config CPU_MIPS64
|
|
bool "MIPS64"
|
|
|
|
config CPU_R3000
|
|
bool "R3000"
|
|
depends on MIPS32
|
|
help
|
|
Please make sure to pick the right CPU type. Linux/MIPS is not
|
|
designed to be generic, i.e. Kernels compiled for R3000 CPUs will
|
|
*not* work on R4000 machines and vice versa. However, since most
|
|
of the supported machines have an R4000 (or similar) CPU, R4x00
|
|
might be a safe bet. If the resulting kernel does not work,
|
|
try to recompile with R3000.
|
|
|
|
config CPU_TX39XX
|
|
bool "R39XX"
|
|
depends on MIPS32
|
|
|
|
config CPU_VR41XX
|
|
bool "R41xx"
|
|
help
|
|
The options selects support for the NEC VR41xx series of processors.
|
|
Only choose this option if you have one of these processors as a
|
|
kernel built with this option will not run on any other type of
|
|
processor or vice versa.
|
|
|
|
config CPU_R4300
|
|
bool "R4300"
|
|
help
|
|
MIPS Technologies R4300-series processors.
|
|
|
|
config CPU_R4X00
|
|
bool "R4x00"
|
|
help
|
|
MIPS Technologies R4000-series processors other than 4300, including
|
|
the R4000, R4400, R4600, and 4700.
|
|
|
|
config CPU_TX49XX
|
|
bool "R49XX"
|
|
|
|
config CPU_R5000
|
|
bool "R5000"
|
|
help
|
|
MIPS Technologies R5000-series processors other than the Nevada.
|
|
|
|
config CPU_R5432
|
|
bool "R5432"
|
|
|
|
config CPU_R6000
|
|
bool "R6000"
|
|
depends on MIPS32 && EXPERIMENTAL
|
|
help
|
|
MIPS Technologies R6000 and R6000A series processors. Note these
|
|
processors are extremly rare and the support for them is incomplete.
|
|
|
|
config CPU_NEVADA
|
|
bool "RM52xx"
|
|
help
|
|
QED / PMC-Sierra RM52xx-series ("Nevada") processors.
|
|
|
|
config CPU_R8000
|
|
bool "R8000"
|
|
depends on MIPS64 && EXPERIMENTAL
|
|
help
|
|
MIPS Technologies R8000 processors. Note these processors are
|
|
uncommon and the support for them is incomplete.
|
|
|
|
config CPU_R10000
|
|
bool "R10000"
|
|
help
|
|
MIPS Technologies R10000-series processors.
|
|
|
|
config CPU_RM7000
|
|
bool "RM7000"
|
|
|
|
config CPU_RM9000
|
|
bool "RM9000"
|
|
|
|
config CPU_SB1
|
|
bool "SB1"
|
|
|
|
endchoice
|
|
|
|
choice
|
|
prompt "Kernel page size"
|
|
default PAGE_SIZE_4KB
|
|
|
|
config PAGE_SIZE_4KB
|
|
bool "4kB"
|
|
help
|
|
This option select the standard 4kB Linux page size. On some
|
|
R3000-family processors this is the only available page size. Using
|
|
4kB page size will minimize memory consumption and is therefore
|
|
recommended for low memory systems.
|
|
|
|
config PAGE_SIZE_8KB
|
|
bool "8kB"
|
|
depends on EXPERIMENTAL && CPU_R8000
|
|
help
|
|
Using 8kB page size will result in higher performance kernel at
|
|
the price of higher memory consumption. This option is available
|
|
only on the R8000 processor. Not that at the time of this writing
|
|
this option is still high experimental; there are also issues with
|
|
compatibility of user applications.
|
|
|
|
config PAGE_SIZE_16KB
|
|
bool "16kB"
|
|
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
|
|
help
|
|
Using 16kB page size will result in higher performance kernel at
|
|
the price of higher memory consumption. This option is available on
|
|
all non-R3000 family processor. Not that at the time of this
|
|
writing this option is still high experimental; there are also
|
|
issues with compatibility of user applications.
|
|
|
|
config PAGE_SIZE_64KB
|
|
bool "64kB"
|
|
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
|
|
help
|
|
Using 64kB page size will result in higher performance kernel at
|
|
the price of higher memory consumption. This option is available on
|
|
all non-R3000 family processor. Not that at the time of this
|
|
writing this option is still high experimental; there are also
|
|
issues with compatibility of user applications.
|
|
|
|
endchoice
|
|
|
|
config BOARD_SCACHE
|
|
bool
|
|
|
|
config IP22_CPU_SCACHE
|
|
bool
|
|
select BOARD_SCACHE
|
|
|
|
config R5000_CPU_SCACHE
|
|
bool
|
|
select BOARD_SCACHE
|
|
|
|
config RM7000_CPU_SCACHE
|
|
bool
|
|
select BOARD_SCACHE
|
|
|
|
config SIBYTE_DMA_PAGEOPS
|
|
bool "Use DMA to clear/copy pages"
|
|
depends on CPU_SB1
|
|
help
|
|
Instead of using the CPU to zero and copy pages, use a Data Mover
|
|
channel. These DMA channels are otherwise unused by the standard
|
|
SiByte Linux port. Seems to give a small performance benefit.
|
|
|
|
config CPU_HAS_PREFETCH
|
|
bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
|
|
default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
|
|
|
|
config VTAG_ICACHE
|
|
bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
|
|
default y if CPU_SB1
|
|
|
|
config SB1_PASS_1_WORKAROUNDS
|
|
bool
|
|
depends on CPU_SB1_PASS_1
|
|
default y
|
|
|
|
config SB1_PASS_2_WORKAROUNDS
|
|
bool
|
|
depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
|
|
default y
|
|
|
|
config SB1_PASS_2_1_WORKAROUNDS
|
|
bool
|
|
depends on CPU_SB1 && CPU_SB1_PASS_2
|
|
default y
|
|
|
|
config 64BIT_PHYS_ADDR
|
|
bool "Support for 64-bit physical address space"
|
|
depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
|
|
|
|
config CPU_ADVANCED
|
|
bool "Override CPU Options"
|
|
depends on MIPS32
|
|
help
|
|
Saying yes here allows you to select support for various features
|
|
your CPU may or may not have. Most people should say N here.
|
|
|
|
config CPU_HAS_LLSC
|
|
bool "ll/sc Instructions available" if CPU_ADVANCED
|
|
default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
|
|
help
|
|
MIPS R4000 series and later provide the Load Linked (ll)
|
|
and Store Conditional (sc) instructions. More information is
|
|
available at <http://www.go-ecs.com/mips/miptek1.htm>.
|
|
|
|
Say Y here if your CPU has the ll and sc instructions. Say Y here
|
|
for better performance, N if you don't know. You must say Y here
|
|
for multiprocessor machines.
|
|
|
|
config CPU_HAS_LLDSCD
|
|
bool "lld/scd Instructions available" if CPU_ADVANCED
|
|
default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
|
|
help
|
|
Say Y here if your CPU has the lld and scd instructions, the 64-bit
|
|
equivalents of ll and sc. Say Y here for better performance, N if
|
|
you don't know. You must say Y here for multiprocessor machines.
|
|
|
|
config CPU_HAS_WB
|
|
bool "Writeback Buffer available" if CPU_ADVANCED
|
|
default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
|
|
help
|
|
Say N here for slightly better performance. You must say Y here for
|
|
machines which require flushing of write buffers in software. Saying
|
|
Y is the safe option; N may result in kernel malfunction and crashes.
|
|
|
|
config CPU_HAS_SYNC
|
|
bool
|
|
depends on !CPU_R3000
|
|
default y
|
|
|
|
#
|
|
# - Highmem only makes sense for the 32-bit kernel.
|
|
# - The current highmem code will only work properly on physically indexed
|
|
# caches such as R3000, SB1, R7000 or those that look like they're virtually
|
|
# indexed such as R4000/R4400 SC and MC versions or R10000. So for the
|
|
# moment we protect the user and offer the highmem option only on machines
|
|
# where it's known to be safe. This will not offer highmem on a few systems
|
|
# such as MIPS32 and MIPS64 CPUs which may have virtual and physically
|
|
# indexed CPUs but we're playing safe.
|
|
# - We should not offer highmem for system of which we already know that they
|
|
# don't have memory configurations that could gain from highmem support in
|
|
# the kernel because they don't support configurations with RAM at physical
|
|
# addresses > 0x20000000.
|
|
#
|
|
config HIGHMEM
|
|
bool "High Memory Support"
|
|
depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
|
|
|
|
config ARCH_FLATMEM_ENABLE
|
|
def_bool y
|
|
depends on !NUMA
|
|
|
|
source "mm/Kconfig"
|
|
|
|
config SMP
|
|
bool "Multi-Processing support"
|
|
depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
|
|
---help---
|
|
This enables support for systems with more than one CPU. If you have
|
|
a system with only one CPU, like most personal computers, say N. If
|
|
you have a system with more than one CPU, say Y.
|
|
|
|
If you say N here, the kernel will run on single and multiprocessor
|
|
machines, but will use only one CPU of a multiprocessor machine. If
|
|
you say Y here, the kernel will run on many, but not all,
|
|
singleprocessor machines. On a singleprocessor machine, the kernel
|
|
will run faster if you say N here.
|
|
|
|
People using multiprocessor machines who say Y here should also say
|
|
Y to "Enhanced Real Time Clock Support", below.
|
|
|
|
See also the <file:Documentation/smp.txt> and the SMP-HOWTO
|
|
available at <http://www.tldp.org/docs.html#howto>.
|
|
|
|
If you don't know what to do here, say N.
|
|
|
|
config NR_CPUS
|
|
int "Maximum number of CPUs (2-64)"
|
|
range 2 64
|
|
depends on SMP
|
|
default "64" if SGI_IP27
|
|
default "2"
|
|
help
|
|
This allows you to specify the maximum number of CPUs which this
|
|
kernel will support. The maximum supported value is 32 for 32-bit
|
|
kernel and 64 for 64-bit kernels; the minimum value which makes
|
|
sense is 2.
|
|
|
|
This is purely to save memory - each supported CPU adds
|
|
approximately eight kilobytes to the kernel image.
|
|
|
|
config PREEMPT
|
|
bool "Preemptible Kernel"
|
|
help
|
|
This option reduces the latency of the kernel when reacting to
|
|
real-time or interactive events by allowing a low priority process to
|
|
be preempted even if it is in kernel mode executing a system call.
|
|
This allows applications to run more reliably even when the system is
|
|
under load.
|
|
|
|
config RTC_DS1742
|
|
bool "DS1742 BRAM/RTC support"
|
|
depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
|
|
|
|
config MIPS_INSANE_LARGE
|
|
bool "Support for large 64-bit configurations"
|
|
depends on CPU_R10000 && MIPS64
|
|
help
|
|
MIPS R10000 does support a 44 bit / 16TB address space as opposed to
|
|
previous 64-bit processors which only supported 40 bit / 1TB. If you
|
|
need processes of more than 1TB virtual address space, say Y here.
|
|
This will result in additional memory usage, so it is not
|
|
recommended for normal users.
|
|
|
|
config RWSEM_GENERIC_SPINLOCK
|
|
bool
|
|
default y
|
|
|
|
endmenu
|
|
|
|
menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
|
|
|
|
config HW_HAS_PCI
|
|
bool
|
|
|
|
config PCI
|
|
bool "Support for PCI controller"
|
|
depends on HW_HAS_PCI
|
|
help
|
|
Find out whether you have a PCI motherboard. PCI is the name of a
|
|
bus system, i.e. the way the CPU talks to the other stuff inside
|
|
your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
|
|
say Y, otherwise N.
|
|
|
|
The PCI-HOWTO, available from
|
|
<http://www.tldp.org/docs.html#howto>, contains valuable
|
|
information about which PCI hardware does work under Linux and which
|
|
doesn't.
|
|
|
|
config PCI_DOMAINS
|
|
bool
|
|
depends on PCI
|
|
|
|
source "drivers/pci/Kconfig"
|
|
|
|
#
|
|
# ISA support is now enabled via select. Too many systems still have the one
|
|
# or other ISA chip on the board that users don't know about so don't expect
|
|
# users to choose the right thing ...
|
|
#
|
|
config ISA
|
|
bool
|
|
|
|
config EISA
|
|
bool "EISA support"
|
|
depends on SGI_IP22 || SNI_RM200_PCI
|
|
select ISA
|
|
---help---
|
|
The Extended Industry Standard Architecture (EISA) bus was
|
|
developed as an open alternative to the IBM MicroChannel bus.
|
|
|
|
The EISA bus provided some of the features of the IBM MicroChannel
|
|
bus while maintaining backward compatibility with cards made for
|
|
the older ISA bus. The EISA bus saw limited use between 1988 and
|
|
1995 when it was made obsolete by the PCI bus.
|
|
|
|
Say Y here if you are building a kernel for an EISA-based machine.
|
|
|
|
Otherwise, say N.
|
|
|
|
source "drivers/eisa/Kconfig"
|
|
|
|
config TC
|
|
bool "TURBOchannel support"
|
|
depends on MACH_DECSTATION
|
|
help
|
|
TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
|
|
processors. Documentation on writing device drivers for TurboChannel
|
|
is available at:
|
|
<http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
|
|
|
|
#config ACCESSBUS
|
|
# bool "Access.Bus support"
|
|
# depends on TC
|
|
|
|
config MMU
|
|
bool
|
|
default y
|
|
|
|
config MCA
|
|
bool
|
|
|
|
config SBUS
|
|
bool
|
|
|
|
source "drivers/pcmcia/Kconfig"
|
|
|
|
source "drivers/pci/hotplug/Kconfig"
|
|
|
|
endmenu
|
|
|
|
menu "Executable file formats"
|
|
|
|
source "fs/Kconfig.binfmt"
|
|
|
|
config TRAD_SIGNALS
|
|
bool
|
|
default y if MIPS32
|
|
|
|
config BUILD_ELF64
|
|
bool "Use 64-bit ELF format for building"
|
|
depends on MIPS64
|
|
help
|
|
A 64-bit kernel is usually built using the 64-bit ELF binary object
|
|
format as it's one that allows arbitrary 64-bit constructs. For
|
|
kernels that are loaded within the KSEG compatibility segments the
|
|
32-bit ELF format can optionally be used resulting in a somewhat
|
|
smaller binary, but this option is not explicitly supported by the
|
|
toolchain and since binutils 2.14 it does not even work at all.
|
|
|
|
Say Y to use the 64-bit format or N to use the 32-bit one.
|
|
|
|
If unsure say Y.
|
|
|
|
config BINFMT_IRIX
|
|
bool "Include IRIX binary compatibility"
|
|
depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
|
|
|
|
config MIPS32_COMPAT
|
|
bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
|
|
depends on MIPS64
|
|
help
|
|
Select this option if you want Linux/MIPS 32-bit binary
|
|
compatibility. Since all software available for Linux/MIPS is
|
|
currently 32-bit you should say Y here.
|
|
|
|
config COMPAT
|
|
bool
|
|
depends on MIPS32_COMPAT
|
|
default y
|
|
|
|
config MIPS32_O32
|
|
bool "Kernel support for o32 binaries"
|
|
depends on MIPS32_COMPAT
|
|
help
|
|
Select this option if you want to run o32 binaries. These are pure
|
|
32-bit binaries as used by the 32-bit Linux/MIPS port. Most of
|
|
existing binaries are in this format.
|
|
|
|
If unsure, say Y.
|
|
|
|
config MIPS32_N32
|
|
bool "Kernel support for n32 binaries"
|
|
depends on MIPS32_COMPAT
|
|
help
|
|
Select this option if you want to run n32 binaries. These are
|
|
64-bit binaries using 32-bit quantities for addressing and certain
|
|
data that would normally be 64-bit. They are used in special
|
|
cases.
|
|
|
|
If unsure, say N.
|
|
|
|
config BINFMT_ELF32
|
|
bool
|
|
default y if MIPS32_O32 || MIPS32_N32
|
|
|
|
config PM
|
|
bool "Power Management support (EXPERIMENTAL)"
|
|
depends on EXPERIMENTAL && MACH_AU1X00
|
|
|
|
endmenu
|
|
|
|
source "net/Kconfig"
|
|
|
|
source "drivers/Kconfig"
|
|
|
|
source "fs/Kconfig"
|
|
|
|
source "arch/mips/Kconfig.debug"
|
|
|
|
source "security/Kconfig"
|
|
|
|
source "crypto/Kconfig"
|
|
|
|
source "lib/Kconfig"
|
|
|
|
#
|
|
# Use the generic interrupt handling code in kernel/irq/:
|
|
#
|
|
config GENERIC_HARDIRQS
|
|
bool
|
|
default y
|
|
|
|
config GENERIC_IRQ_PROBE
|
|
bool
|
|
default y
|
|
|
|
config ISA_DMA_API
|
|
bool
|
|
default y
|