mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
synced 2024-10-31 16:38:12 +00:00
a3ac350793
Commit 485fa1261f ("ARM: OMAP2+: LogicPD Torpedo + Wireless: Add Bluetooth")
set the wrong baud rate for the UART. The Baud rate was 300,000 and it should
be 3,000,000 for WL1283.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
624 lines
16 KiB
C
624 lines
16 KiB
C
/*
|
|
* Legacy platform_data quirks
|
|
*
|
|
* Copyright (C) 2013 Texas Instruments
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/davinci_emac.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/ti_wilink_st.h>
|
|
#include <linux/wl12xx.h>
|
|
#include <linux/mmc/card.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/regulator/machine.h>
|
|
#include <linux/regulator/fixed.h>
|
|
|
|
#include <linux/platform_data/pinctrl-single.h>
|
|
#include <linux/platform_data/hsmmc-omap.h>
|
|
#include <linux/platform_data/iommu-omap.h>
|
|
#include <linux/platform_data/wkup_m3.h>
|
|
#include <linux/platform_data/pwm_omap_dmtimer.h>
|
|
#include <linux/platform_data/media/ir-rx51.h>
|
|
#include <linux/platform_data/asoc-ti-mcbsp.h>
|
|
#include <plat/dmtimer.h>
|
|
|
|
#include "common.h"
|
|
#include "common-board-devices.h"
|
|
#include "control.h"
|
|
#include "omap_device.h"
|
|
#include "omap-pm.h"
|
|
#include "omap-secure.h"
|
|
#include "soc.h"
|
|
#include "hsmmc.h"
|
|
|
|
static struct omap_hsmmc_platform_data __maybe_unused mmc_pdata[2];
|
|
|
|
struct pdata_init {
|
|
const char *compatible;
|
|
void (*fn)(void);
|
|
};
|
|
|
|
static struct of_dev_auxdata omap_auxdata_lookup[];
|
|
static struct twl4030_gpio_platform_data twl_gpio_auxdata;
|
|
|
|
#ifdef CONFIG_MACH_NOKIA_N8X0
|
|
static void __init omap2420_n8x0_legacy_init(void)
|
|
{
|
|
omap_auxdata_lookup[0].platform_data = n8x0_legacy_init();
|
|
}
|
|
#else
|
|
#define omap2420_n8x0_legacy_init NULL
|
|
#endif
|
|
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
/*
|
|
* Configures GPIOs 126, 127 and 129 to 1.8V mode instead of 3.0V
|
|
* mode for MMC1 in case bootloader did not configure things.
|
|
* Note that if the pins are used for MMC1, pbias-regulator
|
|
* manages the IO voltage.
|
|
*/
|
|
static void __init omap3_gpio126_127_129(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
|
|
reg &= ~OMAP343X_PBIASLITEVMODE1;
|
|
reg |= OMAP343X_PBIASLITEPWRDNZ1;
|
|
omap_ctrl_writel(reg, OMAP343X_CONTROL_PBIAS_LITE);
|
|
if (cpu_is_omap3630()) {
|
|
reg = omap_ctrl_readl(OMAP34XX_CONTROL_WKUP_CTRL);
|
|
reg |= OMAP36XX_GPIO_IO_PWRDNZ;
|
|
omap_ctrl_writel(reg, OMAP34XX_CONTROL_WKUP_CTRL);
|
|
}
|
|
}
|
|
|
|
static void __init hsmmc2_internal_input_clk(void)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
|
|
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
|
|
omap_ctrl_writel(reg, OMAP343X_CONTROL_DEVCONF1);
|
|
}
|
|
|
|
static struct iommu_platform_data omap3_iommu_pdata = {
|
|
.reset_name = "mmu",
|
|
.assert_reset = omap_device_assert_hardreset,
|
|
.deassert_reset = omap_device_deassert_hardreset,
|
|
};
|
|
|
|
static int omap3_sbc_t3730_twl_callback(struct device *dev,
|
|
unsigned gpio,
|
|
unsigned ngpio)
|
|
{
|
|
int res;
|
|
|
|
res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
|
|
"wlan pwr");
|
|
if (res)
|
|
return res;
|
|
|
|
gpio_export(gpio, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name)
|
|
{
|
|
int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name);
|
|
|
|
if (err) {
|
|
pr_err("SBC-T3x: %s reset gpio request failed: %d\n",
|
|
hub_name, err);
|
|
return;
|
|
}
|
|
|
|
gpio_export(gpio, 0);
|
|
|
|
udelay(10);
|
|
gpio_set_value(gpio, 1);
|
|
msleep(1);
|
|
}
|
|
|
|
static void __init omap3_sbc_t3730_twl_init(void)
|
|
{
|
|
twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback;
|
|
}
|
|
|
|
static void __init omap3_sbc_t3730_legacy_init(void)
|
|
{
|
|
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
|
|
}
|
|
|
|
static void __init omap3_sbc_t3530_legacy_init(void)
|
|
{
|
|
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
|
|
}
|
|
|
|
static struct ti_st_plat_data wilink_pdata = {
|
|
.nshutdown_gpio = 137,
|
|
.dev_name = "/dev/ttyO1",
|
|
.flow_cntrl = 1,
|
|
.baud_rate = 300000,
|
|
};
|
|
|
|
static struct platform_device wl18xx_device = {
|
|
.name = "kim",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &wilink_pdata,
|
|
}
|
|
};
|
|
|
|
static struct ti_st_plat_data wilink7_pdata = {
|
|
.nshutdown_gpio = 162,
|
|
.dev_name = "/dev/ttyO1",
|
|
.flow_cntrl = 1,
|
|
.baud_rate = 3000000,
|
|
};
|
|
|
|
static struct platform_device wl128x_device = {
|
|
.name = "kim",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &wilink7_pdata,
|
|
}
|
|
};
|
|
|
|
static struct platform_device btwilink_device = {
|
|
.name = "btwilink",
|
|
.id = -1,
|
|
};
|
|
|
|
static void __init omap3_igep0020_rev_f_legacy_init(void)
|
|
{
|
|
platform_device_register(&wl18xx_device);
|
|
platform_device_register(&btwilink_device);
|
|
}
|
|
|
|
static void __init omap3_igep0030_rev_g_legacy_init(void)
|
|
{
|
|
platform_device_register(&wl18xx_device);
|
|
platform_device_register(&btwilink_device);
|
|
}
|
|
|
|
static void __init omap3_evm_legacy_init(void)
|
|
{
|
|
hsmmc2_internal_input_clk();
|
|
}
|
|
|
|
static void am35xx_enable_emac_int(void)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR |
|
|
AM35XX_CPGMAC_C0_MISC_PULSE_CLR | AM35XX_CPGMAC_C0_RX_THRESH_CLR);
|
|
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
|
|
}
|
|
|
|
static void am35xx_disable_emac_int(void)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
v |= (AM35XX_CPGMAC_C0_RX_PULSE_CLR | AM35XX_CPGMAC_C0_TX_PULSE_CLR);
|
|
omap_ctrl_writel(v, AM35XX_CONTROL_LVL_INTR_CLEAR);
|
|
omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); /* OCP barrier */
|
|
}
|
|
|
|
static struct emac_platform_data am35xx_emac_pdata = {
|
|
.interrupt_enable = am35xx_enable_emac_int,
|
|
.interrupt_disable = am35xx_disable_emac_int,
|
|
};
|
|
|
|
static void __init am35xx_emac_reset(void)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
|
|
v &= ~AM35XX_CPGMACSS_SW_RST;
|
|
omap_ctrl_writel(v, AM35XX_CONTROL_IP_SW_RESET);
|
|
omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */
|
|
}
|
|
|
|
static struct gpio cm_t3517_wlan_gpios[] __initdata = {
|
|
{ 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" },
|
|
{ 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" },
|
|
};
|
|
|
|
static void __init omap3_sbc_t3517_wifi_init(void)
|
|
{
|
|
int err = gpio_request_array(cm_t3517_wlan_gpios,
|
|
ARRAY_SIZE(cm_t3517_wlan_gpios));
|
|
if (err) {
|
|
pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
gpio_export(cm_t3517_wlan_gpios[0].gpio, 0);
|
|
gpio_export(cm_t3517_wlan_gpios[1].gpio, 0);
|
|
|
|
msleep(100);
|
|
gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0);
|
|
}
|
|
|
|
static void __init omap3_sbc_t3517_legacy_init(void)
|
|
{
|
|
omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub");
|
|
omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub");
|
|
am35xx_emac_reset();
|
|
hsmmc2_internal_input_clk();
|
|
omap3_sbc_t3517_wifi_init();
|
|
}
|
|
|
|
static void __init am3517_evm_legacy_init(void)
|
|
{
|
|
am35xx_emac_reset();
|
|
}
|
|
|
|
static struct platform_device omap3_rom_rng_device = {
|
|
.name = "omap3-rom-rng",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = rx51_secure_rng_call,
|
|
},
|
|
};
|
|
|
|
static void __init nokia_n900_legacy_init(void)
|
|
{
|
|
hsmmc2_internal_input_clk();
|
|
mmc_pdata[0].name = "external";
|
|
mmc_pdata[1].name = "internal";
|
|
|
|
if (omap_type() == OMAP2_DEVICE_TYPE_SEC) {
|
|
if (IS_ENABLED(CONFIG_ARM_ERRATA_430973)) {
|
|
pr_info("RX-51: Enabling ARM errata 430973 workaround\n");
|
|
/* set IBE to 1 */
|
|
rx51_secure_update_aux_cr(BIT(6), 0);
|
|
} else {
|
|
pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");
|
|
pr_warn("Thumb binaries may crash randomly without this workaround\n");
|
|
}
|
|
|
|
pr_info("RX-51: Registering OMAP3 HWRNG device\n");
|
|
platform_device_register(&omap3_rom_rng_device);
|
|
}
|
|
}
|
|
|
|
static void __init omap3_tao3530_legacy_init(void)
|
|
{
|
|
hsmmc2_internal_input_clk();
|
|
}
|
|
|
|
static void __init omap3_logicpd_torpedo_init(void)
|
|
{
|
|
omap3_gpio126_127_129();
|
|
platform_device_register(&wl128x_device);
|
|
platform_device_register(&btwilink_device);
|
|
}
|
|
|
|
/* omap3pandora legacy devices */
|
|
#define PANDORA_WIFI_IRQ_GPIO 21
|
|
#define PANDORA_WIFI_NRESET_GPIO 23
|
|
|
|
static struct platform_device pandora_backlight = {
|
|
.name = "pandora-backlight",
|
|
.id = -1,
|
|
};
|
|
|
|
static struct regulator_consumer_supply pandora_vmmc3_supply[] = {
|
|
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"),
|
|
};
|
|
|
|
static struct regulator_init_data pandora_vmmc3 = {
|
|
.constraints = {
|
|
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply),
|
|
.consumer_supplies = pandora_vmmc3_supply,
|
|
};
|
|
|
|
static struct fixed_voltage_config pandora_vwlan = {
|
|
.supply_name = "vwlan",
|
|
.microvolts = 1800000, /* 1.8V */
|
|
.gpio = PANDORA_WIFI_NRESET_GPIO,
|
|
.startup_delay = 50000, /* 50ms */
|
|
.enable_high = 1,
|
|
.init_data = &pandora_vmmc3,
|
|
};
|
|
|
|
static struct platform_device pandora_vwlan_device = {
|
|
.name = "reg-fixed-voltage",
|
|
.id = 1,
|
|
.dev = {
|
|
.platform_data = &pandora_vwlan,
|
|
},
|
|
};
|
|
|
|
static void pandora_wl1251_init_card(struct mmc_card *card)
|
|
{
|
|
/*
|
|
* We have TI wl1251 attached to MMC3. Pass this information to
|
|
* SDIO core because it can't be probed by normal methods.
|
|
*/
|
|
if (card->type == MMC_TYPE_SDIO || card->type == MMC_TYPE_SD_COMBO) {
|
|
card->quirks |= MMC_QUIRK_NONSTD_SDIO;
|
|
card->cccr.wide_bus = 1;
|
|
card->cis.vendor = 0x104c;
|
|
card->cis.device = 0x9066;
|
|
card->cis.blksize = 512;
|
|
card->cis.max_dtr = 24000000;
|
|
card->ocr = 0x80;
|
|
}
|
|
}
|
|
|
|
static struct omap2_hsmmc_info pandora_mmc3[] = {
|
|
{
|
|
.mmc = 3,
|
|
.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
|
|
.gpio_cd = -EINVAL,
|
|
.gpio_wp = -EINVAL,
|
|
.init_card = pandora_wl1251_init_card,
|
|
},
|
|
{} /* Terminator */
|
|
};
|
|
|
|
static void __init pandora_wl1251_init(void)
|
|
{
|
|
struct wl1251_platform_data pandora_wl1251_pdata;
|
|
int ret;
|
|
|
|
memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata));
|
|
|
|
pandora_wl1251_pdata.power_gpio = -1;
|
|
|
|
ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq");
|
|
if (ret < 0)
|
|
goto fail;
|
|
|
|
pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO);
|
|
if (pandora_wl1251_pdata.irq < 0)
|
|
goto fail_irq;
|
|
|
|
pandora_wl1251_pdata.use_eeprom = true;
|
|
ret = wl1251_set_platform_data(&pandora_wl1251_pdata);
|
|
if (ret < 0)
|
|
goto fail_irq;
|
|
|
|
return;
|
|
|
|
fail_irq:
|
|
gpio_free(PANDORA_WIFI_IRQ_GPIO);
|
|
fail:
|
|
pr_err("wl1251 board initialisation failed\n");
|
|
}
|
|
|
|
static void __init omap3_pandora_legacy_init(void)
|
|
{
|
|
platform_device_register(&pandora_backlight);
|
|
platform_device_register(&pandora_vwlan_device);
|
|
omap_hsmmc_init(pandora_mmc3);
|
|
omap_hsmmc_late_init(pandora_mmc3);
|
|
pandora_wl1251_init();
|
|
}
|
|
#endif /* CONFIG_ARCH_OMAP3 */
|
|
|
|
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
|
|
static struct iommu_platform_data omap4_iommu_pdata = {
|
|
.reset_name = "mmu_cache",
|
|
.assert_reset = omap_device_assert_hardreset,
|
|
.deassert_reset = omap_device_deassert_hardreset,
|
|
};
|
|
#endif
|
|
|
|
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
|
|
static struct wkup_m3_platform_data wkup_m3_data = {
|
|
.reset_name = "wkup_m3",
|
|
.assert_reset = omap_device_assert_hardreset,
|
|
.deassert_reset = omap_device_deassert_hardreset,
|
|
};
|
|
#endif
|
|
|
|
#ifdef CONFIG_SOC_OMAP5
|
|
static void __init omap5_uevm_legacy_init(void)
|
|
{
|
|
}
|
|
#endif
|
|
|
|
static struct pcs_pdata pcs_pdata;
|
|
|
|
void omap_pcs_legacy_init(int irq, void (*rearm)(void))
|
|
{
|
|
pcs_pdata.irq = irq;
|
|
pcs_pdata.rearm = rearm;
|
|
}
|
|
|
|
/*
|
|
* GPIOs for TWL are initialized by the I2C bus and need custom
|
|
* handing until DSS has device tree bindings.
|
|
*/
|
|
void omap_auxdata_legacy_init(struct device *dev)
|
|
{
|
|
if (dev->platform_data)
|
|
return;
|
|
|
|
if (strcmp("twl4030-gpio", dev_name(dev)))
|
|
return;
|
|
|
|
dev->platform_data = &twl_gpio_auxdata;
|
|
}
|
|
|
|
/* Dual mode timer PWM callbacks platdata */
|
|
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
|
|
static struct pwm_omap_dmtimer_pdata pwm_dmtimer_pdata = {
|
|
.request_by_node = omap_dm_timer_request_by_node,
|
|
.request_specific = omap_dm_timer_request_specific,
|
|
.request = omap_dm_timer_request,
|
|
.set_source = omap_dm_timer_set_source,
|
|
.get_irq = omap_dm_timer_get_irq,
|
|
.set_int_enable = omap_dm_timer_set_int_enable,
|
|
.set_int_disable = omap_dm_timer_set_int_disable,
|
|
.free = omap_dm_timer_free,
|
|
.enable = omap_dm_timer_enable,
|
|
.disable = omap_dm_timer_disable,
|
|
.get_fclk = omap_dm_timer_get_fclk,
|
|
.start = omap_dm_timer_start,
|
|
.stop = omap_dm_timer_stop,
|
|
.set_load = omap_dm_timer_set_load,
|
|
.set_match = omap_dm_timer_set_match,
|
|
.set_pwm = omap_dm_timer_set_pwm,
|
|
.set_prescaler = omap_dm_timer_set_prescaler,
|
|
.read_counter = omap_dm_timer_read_counter,
|
|
.write_counter = omap_dm_timer_write_counter,
|
|
.read_status = omap_dm_timer_read_status,
|
|
.write_status = omap_dm_timer_write_status,
|
|
};
|
|
#endif
|
|
|
|
static struct lirc_rx51_platform_data __maybe_unused rx51_lirc_data = {
|
|
.set_max_mpu_wakeup_lat = omap_pm_set_max_mpu_wakeup_lat,
|
|
};
|
|
|
|
static struct platform_device __maybe_unused rx51_lirc_device = {
|
|
.name = "lirc_rx51",
|
|
.id = -1,
|
|
.dev = {
|
|
.platform_data = &rx51_lirc_data,
|
|
},
|
|
};
|
|
|
|
#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
|
|
static struct omap_mcbsp_platform_data mcbsp_pdata;
|
|
static void __init omap3_mcbsp_init(void)
|
|
{
|
|
omap3_mcbsp_init_pdata_callback(&mcbsp_pdata);
|
|
}
|
|
#else
|
|
static void __init omap3_mcbsp_init(void) {}
|
|
#endif
|
|
|
|
/*
|
|
* Few boards still need auxdata populated before we populate
|
|
* the dev entries in of_platform_populate().
|
|
*/
|
|
static struct pdata_init auxdata_quirks[] __initdata = {
|
|
#ifdef CONFIG_SOC_OMAP2420
|
|
{ "nokia,n800", omap2420_n8x0_legacy_init, },
|
|
{ "nokia,n810", omap2420_n8x0_legacy_init, },
|
|
{ "nokia,n810-wimax", omap2420_n8x0_legacy_init, },
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, },
|
|
#endif
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
|
|
#ifdef CONFIG_MACH_NOKIA_N8X0
|
|
OF_DEV_AUXDATA("ti,omap2420-mmc", 0x4809c000, "mmci-omap.0", NULL),
|
|
OF_DEV_AUXDATA("menelaus", 0x72, "1-0072", &n8x0_menelaus_platform_data),
|
|
OF_DEV_AUXDATA("tlv320aic3x", 0x18, "2-0018", &n810_aic33_data),
|
|
#endif
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
OF_DEV_AUXDATA("ti,omap2-iommu", 0x5d000000, "5d000000.mmu",
|
|
&omap3_iommu_pdata),
|
|
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x4809c000, "4809c000.mmc", &mmc_pdata[0]),
|
|
OF_DEV_AUXDATA("ti,omap3-hsmmc", 0x480b4000, "480b4000.mmc", &mmc_pdata[1]),
|
|
OF_DEV_AUXDATA("nokia,n900-ir", 0, "n900-ir", &rx51_lirc_data),
|
|
/* Only on am3517 */
|
|
OF_DEV_AUXDATA("ti,davinci_mdio", 0x5c030000, "davinci_mdio.0", NULL),
|
|
OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0",
|
|
&am35xx_emac_pdata),
|
|
/* McBSP modules with sidetone core */
|
|
#if IS_ENABLED(CONFIG_SND_OMAP_SOC_MCBSP)
|
|
OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49022000, "49022000.mcbsp", &mcbsp_pdata),
|
|
OF_DEV_AUXDATA("ti,omap3-mcbsp", 0x49024000, "49024000.mcbsp", &mcbsp_pdata),
|
|
#endif
|
|
#endif
|
|
#ifdef CONFIG_SOC_AM33XX
|
|
OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
|
|
&wkup_m3_data),
|
|
#endif
|
|
#ifdef CONFIG_SOC_AM43XX
|
|
OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3",
|
|
&wkup_m3_data),
|
|
#endif
|
|
#if IS_ENABLED(CONFIG_OMAP_DM_TIMER)
|
|
OF_DEV_AUXDATA("ti,omap-dmtimer-pwm", 0, NULL, &pwm_dmtimer_pdata),
|
|
#endif
|
|
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5)
|
|
OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu",
|
|
&omap4_iommu_pdata),
|
|
OF_DEV_AUXDATA("ti,omap4-iommu", 0x55082000, "55082000.mmu",
|
|
&omap4_iommu_pdata),
|
|
#endif
|
|
/* Common auxdata */
|
|
OF_DEV_AUXDATA("pinctrl-single", 0, NULL, &pcs_pdata),
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
/*
|
|
* Few boards still need to initialize some legacy devices with
|
|
* platform data until the drivers support device tree.
|
|
*/
|
|
static struct pdata_init pdata_quirks[] __initdata = {
|
|
#ifdef CONFIG_ARCH_OMAP3
|
|
{ "compulab,omap3-sbc-t3517", omap3_sbc_t3517_legacy_init, },
|
|
{ "compulab,omap3-sbc-t3530", omap3_sbc_t3530_legacy_init, },
|
|
{ "compulab,omap3-sbc-t3730", omap3_sbc_t3730_legacy_init, },
|
|
{ "nokia,omap3-n900", nokia_n900_legacy_init, },
|
|
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
|
|
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
|
|
{ "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
|
|
{ "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
|
|
{ "logicpd,dm3730-torpedo-devkit", omap3_logicpd_torpedo_init, },
|
|
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
|
|
{ "ti,am3517-evm", am3517_evm_legacy_init, },
|
|
{ "technexion,omap3-tao3530", omap3_tao3530_legacy_init, },
|
|
{ "openpandora,omap3-pandora-600mhz", omap3_pandora_legacy_init, },
|
|
{ "openpandora,omap3-pandora-1ghz", omap3_pandora_legacy_init, },
|
|
#endif
|
|
#ifdef CONFIG_SOC_OMAP5
|
|
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
|
|
#endif
|
|
{ /* sentinel */ },
|
|
};
|
|
|
|
static void pdata_quirks_check(struct pdata_init *quirks)
|
|
{
|
|
while (quirks->compatible) {
|
|
if (of_machine_is_compatible(quirks->compatible)) {
|
|
if (quirks->fn)
|
|
quirks->fn();
|
|
break;
|
|
}
|
|
quirks++;
|
|
}
|
|
}
|
|
|
|
void __init pdata_quirks_init(const struct of_device_id *omap_dt_match_table)
|
|
{
|
|
/*
|
|
* We still need this for omap2420 and omap3 PM to work, others are
|
|
* using drivers/misc/sram.c already.
|
|
*/
|
|
if (of_machine_is_compatible("ti,omap2420") ||
|
|
of_machine_is_compatible("ti,omap3"))
|
|
omap_sdrc_init(NULL, NULL);
|
|
|
|
if (of_machine_is_compatible("ti,omap3"))
|
|
omap3_mcbsp_init();
|
|
pdata_quirks_check(auxdata_quirks);
|
|
of_platform_populate(NULL, omap_dt_match_table,
|
|
omap_auxdata_lookup, NULL);
|
|
pdata_quirks_check(pdata_quirks);
|
|
}
|