linux-stable/drivers/staging/mt7621-pci-phy/pci-mt7621-phy.c
Sergio Paracuellos 774dd15f81 staging: mt7621-pci-phy: remove disable clock from the phy exit function
The clock which has been used here is not about the phy but the pcie port.
It has been properly handled into host pcie driver code. Hence, remove it
from here which is the correct thing to do.

Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-21 16:50:10 +02:00

415 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Mediatek MT7621 PCI PHY Driver
* Author: Sergio Paracuellos <sergio.paracuellos@gmail.com>
*/
#include <dt-bindings/phy/phy.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/sys_soc.h>
#include <mt7621.h>
#include <ralink_regs.h>
#define RG_PE1_PIPE_REG 0x02c
#define RG_PE1_PIPE_RST BIT(12)
#define RG_PE1_PIPE_CMD_FRC BIT(4)
#define RG_P0_TO_P1_WIDTH 0x100
#define RG_PE1_H_LCDDS_REG 0x49c
#define RG_PE1_H_LCDDS_PCW GENMASK(30, 0)
#define RG_PE1_H_LCDDS_PCW_VAL(x) ((0x7fffffff & (x)) << 0)
#define RG_PE1_FRC_H_XTAL_REG 0x400
#define RG_PE1_FRC_H_XTAL_TYPE BIT(8)
#define RG_PE1_H_XTAL_TYPE GENMASK(10, 9)
#define RG_PE1_H_XTAL_TYPE_VAL(x) ((0x3 & (x)) << 9)
#define RG_PE1_FRC_PHY_REG 0x000
#define RG_PE1_FRC_PHY_EN BIT(4)
#define RG_PE1_PHY_EN BIT(5)
#define RG_PE1_H_PLL_REG 0x490
#define RG_PE1_H_PLL_BC GENMASK(23, 22)
#define RG_PE1_H_PLL_BC_VAL(x) ((0x3 & (x)) << 22)
#define RG_PE1_H_PLL_BP GENMASK(21, 18)
#define RG_PE1_H_PLL_BP_VAL(x) ((0xf & (x)) << 18)
#define RG_PE1_H_PLL_IR GENMASK(15, 12)
#define RG_PE1_H_PLL_IR_VAL(x) ((0xf & (x)) << 12)
#define RG_PE1_H_PLL_IC GENMASK(11, 8)
#define RG_PE1_H_PLL_IC_VAL(x) ((0xf & (x)) << 8)
#define RG_PE1_H_PLL_PREDIV GENMASK(7, 6)
#define RG_PE1_H_PLL_PREDIV_VAL(x) ((0x3 & (x)) << 6)
#define RG_PE1_PLL_DIVEN GENMASK(3, 1)
#define RG_PE1_PLL_DIVEN_VAL(x) ((0x7 & (x)) << 1)
#define RG_PE1_H_PLL_FBKSEL_REG 0x4bc
#define RG_PE1_H_PLL_FBKSEL GENMASK(5, 4)
#define RG_PE1_H_PLL_FBKSEL_VAL(x) ((0x3 & (x)) << 4)
#define RG_PE1_H_LCDDS_SSC_PRD_REG 0x4a4
#define RG_PE1_H_LCDDS_SSC_PRD GENMASK(15, 0)
#define RG_PE1_H_LCDDS_SSC_PRD_VAL(x) ((0xffff & (x)) << 0)
#define RG_PE1_H_LCDDS_SSC_DELTA_REG 0x4a8
#define RG_PE1_H_LCDDS_SSC_DELTA GENMASK(11, 0)
#define RG_PE1_H_LCDDS_SSC_DELTA_VAL(x) ((0xfff & (x)) << 0)
#define RG_PE1_H_LCDDS_SSC_DELTA1 GENMASK(27, 16)
#define RG_PE1_H_LCDDS_SSC_DELTA1_VAL(x) ((0xff & (x)) << 16)
#define RG_PE1_LCDDS_CLK_PH_INV_REG 0x4a0
#define RG_PE1_LCDDS_CLK_PH_INV BIT(5)
#define RG_PE1_H_PLL_BR_REG 0x4ac
#define RG_PE1_H_PLL_BR GENMASK(18, 16)
#define RG_PE1_H_PLL_BR_VAL(x) ((0x7 & (x)) << 16)
#define RG_PE1_MSTCKDIV_REG 0x414
#define RG_PE1_MSTCKDIV GENMASK(7, 6)
#define RG_PE1_MSTCKDIV_VAL(x) ((0x3 & (x)) << 6)
#define RG_PE1_FRC_MSTCKDIV BIT(5)
#define MAX_PHYS 2
/**
* struct mt7621_pci_phy_instance - Mt7621 Pcie PHY device
* @phy: pointer to the kernel PHY device
* @port_base: base register
* @index: internal ID to identify the Mt7621 PCIe PHY
*/
struct mt7621_pci_phy_instance {
struct phy *phy;
void __iomem *port_base;
u32 index;
};
/**
* struct mt7621_pci_phy - Mt7621 Pcie PHY core
* @dev: pointer to device
* @regmap: kernel regmap pointer
* @phys: pointer to Mt7621 PHY device
* @nphys: number of PHY devices for this core
* @bypass_pipe_rst: mark if 'mt7621_bypass_pipe_rst'
* needs to be executed. Depends on chip revision.
*/
struct mt7621_pci_phy {
struct device *dev;
struct regmap *regmap;
struct mt7621_pci_phy_instance **phys;
int nphys;
bool bypass_pipe_rst;
};
static inline u32 phy_read(struct mt7621_pci_phy *phy, u32 reg)
{
u32 val;
regmap_read(phy->regmap, reg, &val);
return val;
}
static inline void phy_write(struct mt7621_pci_phy *phy, u32 val, u32 reg)
{
regmap_write(phy->regmap, reg, val);
}
static void mt7621_bypass_pipe_rst(struct mt7621_pci_phy *phy,
struct mt7621_pci_phy_instance *instance)
{
u32 offset = (instance->index != 1) ?
RG_PE1_PIPE_REG : RG_PE1_PIPE_REG + RG_P0_TO_P1_WIDTH;
u32 reg;
reg = phy_read(phy, offset);
reg &= ~(RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC);
reg |= (RG_PE1_PIPE_RST | RG_PE1_PIPE_CMD_FRC);
phy_write(phy, reg, offset);
}
static void mt7621_set_phy_for_ssc(struct mt7621_pci_phy *phy,
struct mt7621_pci_phy_instance *instance)
{
struct device *dev = phy->dev;
u32 reg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0);
u32 offset;
u32 val;
reg = (reg >> 6) & 0x7;
/* Set PCIe Port PHY to disable SSC */
/* Debug Xtal Type */
val = phy_read(phy, RG_PE1_FRC_H_XTAL_REG);
val &= ~(RG_PE1_FRC_H_XTAL_TYPE | RG_PE1_H_XTAL_TYPE);
val |= RG_PE1_FRC_H_XTAL_TYPE;
val |= RG_PE1_H_XTAL_TYPE_VAL(0x00);
phy_write(phy, val, RG_PE1_FRC_H_XTAL_REG);
/* disable port */
offset = (instance->index != 1) ?
RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
val = phy_read(phy, offset);
val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
val |= RG_PE1_FRC_PHY_EN;
phy_write(phy, val, offset);
/* Set Pre-divider ratio (for host mode) */
val = phy_read(phy, RG_PE1_H_PLL_REG);
val &= ~(RG_PE1_H_PLL_PREDIV);
if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
val |= RG_PE1_H_PLL_PREDIV_VAL(0x01);
phy_write(phy, val, RG_PE1_H_PLL_REG);
dev_info(dev, "Xtal is 40MHz\n");
} else { /* 25MHz | 20MHz Xtal */
val |= RG_PE1_H_PLL_PREDIV_VAL(0x00);
phy_write(phy, val, RG_PE1_H_PLL_REG);
if (reg >= 6) {
dev_info(dev, "Xtal is 25MHz\n");
/* Select feedback clock */
val = phy_read(phy, RG_PE1_H_PLL_FBKSEL_REG);
val &= ~(RG_PE1_H_PLL_FBKSEL);
val |= RG_PE1_H_PLL_FBKSEL_VAL(0x01);
phy_write(phy, val, RG_PE1_H_PLL_FBKSEL_REG);
/* DDS NCPO PCW (for host mode) */
val = phy_read(phy, RG_PE1_H_LCDDS_SSC_PRD_REG);
val &= ~(RG_PE1_H_LCDDS_SSC_PRD);
val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18000000);
phy_write(phy, val, RG_PE1_H_LCDDS_SSC_PRD_REG);
/* DDS SSC dither period control */
val = phy_read(phy, RG_PE1_H_LCDDS_SSC_PRD_REG);
val &= ~(RG_PE1_H_LCDDS_SSC_PRD);
val |= RG_PE1_H_LCDDS_SSC_PRD_VAL(0x18d);
phy_write(phy, val, RG_PE1_H_LCDDS_SSC_PRD_REG);
/* DDS SSC dither amplitude control */
val = phy_read(phy, RG_PE1_H_LCDDS_SSC_DELTA_REG);
val &= ~(RG_PE1_H_LCDDS_SSC_DELTA |
RG_PE1_H_LCDDS_SSC_DELTA1);
val |= RG_PE1_H_LCDDS_SSC_DELTA_VAL(0x4a);
val |= RG_PE1_H_LCDDS_SSC_DELTA1_VAL(0x4a);
phy_write(phy, val, RG_PE1_H_LCDDS_SSC_DELTA_REG);
} else {
dev_info(dev, "Xtal is 20MHz\n");
}
}
/* DDS clock inversion */
val = phy_read(phy, RG_PE1_LCDDS_CLK_PH_INV_REG);
val &= ~(RG_PE1_LCDDS_CLK_PH_INV);
val |= RG_PE1_LCDDS_CLK_PH_INV;
phy_write(phy, val, RG_PE1_LCDDS_CLK_PH_INV_REG);
/* Set PLL bits */
val = phy_read(phy, RG_PE1_H_PLL_REG);
val &= ~(RG_PE1_H_PLL_BC | RG_PE1_H_PLL_BP | RG_PE1_H_PLL_IR |
RG_PE1_H_PLL_IC | RG_PE1_PLL_DIVEN);
val |= RG_PE1_H_PLL_BC_VAL(0x02);
val |= RG_PE1_H_PLL_BP_VAL(0x06);
val |= RG_PE1_H_PLL_IR_VAL(0x02);
val |= RG_PE1_H_PLL_IC_VAL(0x01);
val |= RG_PE1_PLL_DIVEN_VAL(0x02);
phy_write(phy, val, RG_PE1_H_PLL_REG);
val = phy_read(phy, RG_PE1_H_PLL_BR_REG);
val &= ~(RG_PE1_H_PLL_BR);
val |= RG_PE1_H_PLL_BR_VAL(0x00);
phy_write(phy, val, RG_PE1_H_PLL_BR_REG);
if (reg <= 5 && reg >= 3) { /* 40MHz Xtal */
/* set force mode enable of da_pe1_mstckdiv */
val = phy_read(phy, RG_PE1_MSTCKDIV_REG);
val &= ~(RG_PE1_MSTCKDIV | RG_PE1_FRC_MSTCKDIV);
val |= (RG_PE1_MSTCKDIV_VAL(0x01) | RG_PE1_FRC_MSTCKDIV);
phy_write(phy, val, RG_PE1_MSTCKDIV_REG);
}
}
static int mt7621_pci_phy_init(struct phy *phy)
{
struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy);
struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent);
if (mphy->bypass_pipe_rst)
mt7621_bypass_pipe_rst(mphy, instance);
mt7621_set_phy_for_ssc(mphy, instance);
return 0;
}
static int mt7621_pci_phy_power_on(struct phy *phy)
{
struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy);
struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent);
u32 offset = (instance->index != 1) ?
RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
u32 val;
/* Enable PHY and disable force mode */
val = phy_read(mphy, offset);
val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
val |= (RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
phy_write(mphy, val, offset);
return 0;
}
static int mt7621_pci_phy_power_off(struct phy *phy)
{
struct mt7621_pci_phy_instance *instance = phy_get_drvdata(phy);
struct mt7621_pci_phy *mphy = dev_get_drvdata(phy->dev.parent);
u32 offset = (instance->index != 1) ?
RG_PE1_FRC_PHY_REG : RG_PE1_FRC_PHY_REG + RG_P0_TO_P1_WIDTH;
u32 val;
/* Disable PHY */
val = phy_read(mphy, offset);
val &= ~(RG_PE1_FRC_PHY_EN | RG_PE1_PHY_EN);
val |= RG_PE1_FRC_PHY_EN;
phy_write(mphy, val, offset);
return 0;
}
static int mt7621_pci_phy_exit(struct phy *phy)
{
return 0;
}
static const struct phy_ops mt7621_pci_phy_ops = {
.init = mt7621_pci_phy_init,
.exit = mt7621_pci_phy_exit,
.power_on = mt7621_pci_phy_power_on,
.power_off = mt7621_pci_phy_power_off,
.owner = THIS_MODULE,
};
static struct phy *mt7621_pcie_phy_of_xlate(struct device *dev,
struct of_phandle_args *args)
{
struct mt7621_pci_phy *mt7621_phy = dev_get_drvdata(dev);
if (args->args_count == 0)
return mt7621_phy->phys[0]->phy;
if (WARN_ON(args->args[0] >= MAX_PHYS))
return ERR_PTR(-ENODEV);
return mt7621_phy->phys[args->args[0]]->phy;
}
static const struct soc_device_attribute mt7621_pci_quirks_match[] = {
{ .soc_id = "mt7621", .revision = "E2" }
};
static const struct regmap_config mt7621_pci_phy_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
.max_register = 0x700,
};
static int mt7621_pci_phy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct soc_device_attribute *attr;
struct phy_provider *provider;
struct mt7621_pci_phy *phy;
struct resource *res;
int port;
void __iomem *port_base;
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
if (!phy)
return -ENOMEM;
phy->nphys = MAX_PHYS;
phy->phys = devm_kcalloc(dev, phy->nphys,
sizeof(*phy->phys), GFP_KERNEL);
if (!phy->phys)
return -ENOMEM;
attr = soc_device_match(mt7621_pci_quirks_match);
if (attr)
phy->bypass_pipe_rst = true;
phy->dev = dev;
platform_set_drvdata(pdev, phy);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(dev, "failed to get address resource\n");
return -ENXIO;
}
port_base = devm_ioremap_resource(dev, res);
if (IS_ERR(port_base)) {
dev_err(dev, "failed to remap phy regs\n");
return PTR_ERR(port_base);
}
phy->regmap = devm_regmap_init_mmio(phy->dev, port_base,
&mt7621_pci_phy_regmap_config);
if (IS_ERR(phy->regmap))
return PTR_ERR(phy->regmap);
for (port = 0; port < MAX_PHYS; port++) {
struct mt7621_pci_phy_instance *instance;
struct phy *pphy;
instance = devm_kzalloc(dev, sizeof(*instance), GFP_KERNEL);
if (!instance)
return -ENOMEM;
phy->phys[port] = instance;
pphy = devm_phy_create(dev, dev->of_node, &mt7621_pci_phy_ops);
if (IS_ERR(phy)) {
dev_err(dev, "failed to create phy\n");
return PTR_ERR(phy);
}
instance->port_base = port_base;
instance->phy = pphy;
instance->index = port;
phy_set_drvdata(pphy, instance);
}
provider = devm_of_phy_provider_register(dev, mt7621_pcie_phy_of_xlate);
return PTR_ERR_OR_ZERO(provider);
}
static const struct of_device_id mt7621_pci_phy_ids[] = {
{ .compatible = "mediatek,mt7621-pci-phy" },
{},
};
MODULE_DEVICE_TABLE(of, mt7621_pci_ids);
static struct platform_driver mt7621_pci_phy_driver = {
.probe = mt7621_pci_phy_probe,
.driver = {
.name = "mt7621-pci-phy",
.of_match_table = of_match_ptr(mt7621_pci_phy_ids),
},
};
static int __init mt7621_pci_phy_drv_init(void)
{
return platform_driver_register(&mt7621_pci_phy_driver);
}
module_init(mt7621_pci_phy_drv_init);
MODULE_AUTHOR("Sergio Paracuellos <sergio.paracuellos@gmail.com>");
MODULE_DESCRIPTION("MediaTek MT7621 PCIe PHY driver");
MODULE_LICENSE("GPL v2");